Merge pull request #2880 from home-assistant/hotfix-026-3

Hotfix 026 3

.coveragerc

@@ -3,20 +3,28 @@ source = homeassistant
 
 omit =
     homeassistant/__main__.py
+    homeassistant/scripts/*.py
+    homeassistant/helpers/typing.py
 
     # omit pieces of code that rely on external devices being present
-    homeassistant/components/alarm_control_panel/alarmdotcom.py
-    homeassistant/components/alarm_control_panel/nx584.py
+    homeassistant/components/apcupsd.py
+    homeassistant/components/*/apcupsd.py
 
     homeassistant/components/arduino.py
     homeassistant/components/*/arduino.py
 
-    homeassistant/components/apcupsd.py
-    homeassistant/components/*/apcupsd.py
-
     homeassistant/components/bloomsky.py
     homeassistant/components/*/bloomsky.py
 
+    homeassistant/components/dweet.py
+    homeassistant/components/*/dweet.py
+
+    homeassistant/components/ecobee.py
+    homeassistant/components/*/ecobee.py
+
+    homeassistant/components/envisalink.py
+    homeassistant/components/*/envisalink.py
+
     homeassistant/components/insteon_hub.py
     homeassistant/components/*/insteon_hub.py
 
@@ -26,21 +34,40 @@ omit =
     homeassistant/components/modbus.py
     homeassistant/components/*/modbus.py
 
-    homeassistant/components/tellstick.py
-    homeassistant/components/*/tellstick.py
+    homeassistant/components/mysensors.py
+    homeassistant/components/*/mysensors.py
+
+    homeassistant/components/nest.py
+    homeassistant/components/*/nest.py
+
+    homeassistant/components/octoprint.py
+    homeassistant/components/*/octoprint.py
+
+    homeassistant/components/qwikswitch.py
+    homeassistant/components/*/qwikswitch.py
+
+    homeassistant/components/rpi_gpio.py
+    homeassistant/components/*/rpi_gpio.py
+
+    homeassistant/components/scsgate.py
+    homeassistant/components/*/scsgate.py
 
     homeassistant/components/tellduslive.py
     homeassistant/components/*/tellduslive.py
 
+    homeassistant/components/tellstick.py
+    homeassistant/components/*/tellstick.py
+
+    homeassistant/components/*/thinkingcleaner.py
+
     homeassistant/components/vera.py
     homeassistant/components/*/vera.py
 
-    homeassistant/components/ecobee.py
-    homeassistant/components/*/ecobee.py
-
     homeassistant/components/verisure.py
     homeassistant/components/*/verisure.py
 
+    homeassistant/components/*/webostv.py
+
     homeassistant/components/wemo.py
     homeassistant/components/*/wemo.py
 
@@ -53,28 +80,40 @@ omit =
     homeassistant/components/zwave.py
     homeassistant/components/*/zwave.py
 
-    homeassistant/components/mysensors.py
-    homeassistant/components/*/mysensors.py
+    homeassistant/components/enocean.py
+    homeassistant/components/*/enocean.py
 
-    homeassistant/components/nest.py
-    homeassistant/components/*/nest.py
+    homeassistant/components/netatmo.py
+    homeassistant/components/*/netatmo.py
 
-    homeassistant/components/rpi_gpio.py
-    homeassistant/components/*/rpi_gpio.py
+    homeassistant/components/homematic.py
+    homeassistant/components/*/homematic.py
 
-    homeassistant/components/scsgate.py
-    homeassistant/components/*/scsgate.py
+    homeassistant/components/pilight.py
+    homeassistant/components/*/pilight.py
 
+    homeassistant/components/knx.py
+    homeassistant/components/switch/knx.py
+    homeassistant/components/binary_sensor/knx.py
+    homeassistant/components/thermostat/knx.py
+
+    homeassistant/components/alarm_control_panel/alarmdotcom.py
+    homeassistant/components/alarm_control_panel/nx584.py
+    homeassistant/components/alarm_control_panel/simplisafe.py
     homeassistant/components/binary_sensor/arest.py
     homeassistant/components/binary_sensor/rest.py
     homeassistant/components/browser.py
     homeassistant/components/camera/bloomsky.py
+    homeassistant/components/camera/ffmpeg.py
     homeassistant/components/camera/foscam.py
     homeassistant/components/camera/generic.py
     homeassistant/components/camera/mjpeg.py
+    homeassistant/components/camera/rpi_camera.py
     homeassistant/components/device_tracker/actiontec.py
     homeassistant/components/device_tracker/aruba.py
     homeassistant/components/device_tracker/asuswrt.py
+    homeassistant/components/device_tracker/bluetooth_tracker.py
+    homeassistant/components/device_tracker/bt_home_hub_5.py
     homeassistant/components/device_tracker/ddwrt.py
     homeassistant/components/device_tracker/fritz.py
     homeassistant/components/device_tracker/icloud.py
@@ -88,30 +127,54 @@ omit =
     homeassistant/components/device_tracker/ubus.py
     homeassistant/components/discovery.py
     homeassistant/components/downloader.py
+    homeassistant/components/feedreader.py
+    homeassistant/components/foursquare.py
+    homeassistant/components/garage_door/rpi_gpio.py
     homeassistant/components/garage_door/wink.py
+    homeassistant/components/hdmi_cec.py
     homeassistant/components/ifttt.py
+    homeassistant/components/joaoapps_join.py
     homeassistant/components/keyboard.py
     homeassistant/components/light/blinksticklight.py
+    homeassistant/components/light/flux_led.py
     homeassistant/components/light/hue.py
     homeassistant/components/light/hyperion.py
     homeassistant/components/light/lifx.py
     homeassistant/components/light/limitlessled.py
+    homeassistant/components/light/osramlightify.py
+    homeassistant/components/light/x10.py
+    homeassistant/components/lirc.py
+    homeassistant/components/media_player/braviatv.py
     homeassistant/components/media_player/cast.py
+    homeassistant/components/media_player/cmus.py
     homeassistant/components/media_player/denon.py
+    homeassistant/components/media_player/directv.py
     homeassistant/components/media_player/firetv.py
+    homeassistant/components/media_player/gpmdp.py
     homeassistant/components/media_player/itunes.py
     homeassistant/components/media_player/kodi.py
+    homeassistant/components/media_player/lg_netcast.py
+    homeassistant/components/media_player/mpchc.py
     homeassistant/components/media_player/mpd.py
+    homeassistant/components/media_player/onkyo.py
+    homeassistant/components/media_player/panasonic_viera.py
+    homeassistant/components/media_player/pandora.py
+    homeassistant/components/media_player/pioneer.py
     homeassistant/components/media_player/plex.py
+    homeassistant/components/media_player/roku.py
+    homeassistant/components/media_player/russound_rnet.py
     homeassistant/components/media_player/samsungtv.py
     homeassistant/components/media_player/snapcast.py
     homeassistant/components/media_player/sonos.py
     homeassistant/components/media_player/squeezebox.py
     homeassistant/components/media_player/yamaha.py
+    homeassistant/components/notify/aws_lambda.py
+    homeassistant/components/notify/aws_sns.py
+    homeassistant/components/notify/aws_sqs.py
     homeassistant/components/notify/free_mobile.py
-    homeassistant/components/notify/googlevoice.py
     homeassistant/components/notify/gntp.py
     homeassistant/components/notify/instapush.py
+    homeassistant/components/notify/joaoapps_join.py
     homeassistant/components/notify/message_bird.py
     homeassistant/components/notify/nma.py
     homeassistant/components/notify/pushbullet.py
@@ -123,6 +186,7 @@ omit =
     homeassistant/components/notify/smtp.py
     homeassistant/components/notify/syslog.py
     homeassistant/components/notify/telegram.py
+    homeassistant/components/notify/twilio_sms.py
     homeassistant/components/notify/twitter.py
     homeassistant/components/notify/xmpp.py
     homeassistant/components/scene/hunterdouglas_powerview.py
@@ -131,19 +195,35 @@ omit =
     homeassistant/components/sensor/cpuspeed.py
     homeassistant/components/sensor/deutsche_bahn.py
     homeassistant/components/sensor/dht.py
-    homeassistant/components/sensor/dweet.py
+    homeassistant/components/sensor/dte_energy_bridge.py
     homeassistant/components/sensor/efergy.py
     homeassistant/components/sensor/eliqonline.py
+    homeassistant/components/sensor/fastdotcom.py
+    homeassistant/components/sensor/fitbit.py
+    homeassistant/components/sensor/fixer.py
     homeassistant/components/sensor/forecast.py
     homeassistant/components/sensor/glances.py
-    homeassistant/components/sensor/netatmo.py
+    homeassistant/components/sensor/google_travel_time.py
+    homeassistant/components/sensor/gpsd.py
+    homeassistant/components/sensor/gtfs.py
+    homeassistant/components/sensor/imap.py
+    homeassistant/components/sensor/lastfm.py
+    homeassistant/components/sensor/loopenergy.py
     homeassistant/components/sensor/neurio_energy.py
+    homeassistant/components/sensor/nzbget.py
+    homeassistant/components/sensor/ohmconnect.py
     homeassistant/components/sensor/onewire.py
+    homeassistant/components/sensor/openexchangerates.py
     homeassistant/components/sensor/openweathermap.py
+    homeassistant/components/sensor/plex.py
     homeassistant/components/sensor/rest.py
     homeassistant/components/sensor/sabnzbd.py
+    homeassistant/components/sensor/serial_pm.py
+    homeassistant/components/sensor/snmp.py
     homeassistant/components/sensor/speedtest.py
     homeassistant/components/sensor/steam_online.py
+    homeassistant/components/sensor/supervisord.py
+    homeassistant/components/sensor/swiss_hydrological_data.py
     homeassistant/components/sensor/swiss_public_transport.py
     homeassistant/components/sensor/systemmonitor.py
     homeassistant/components/sensor/temper.py
@@ -153,20 +233,28 @@ omit =
     homeassistant/components/sensor/twitch.py
     homeassistant/components/sensor/uber.py
     homeassistant/components/sensor/worldclock.py
+    homeassistant/components/sensor/yweather.py
+    homeassistant/components/switch/acer_projector.py
     homeassistant/components/switch/arest.py
     homeassistant/components/switch/dlink.py
     homeassistant/components/switch/edimax.py
     homeassistant/components/switch/hikvisioncam.py
     homeassistant/components/switch/mystrom.py
+    homeassistant/components/switch/netio.py
     homeassistant/components/switch/orvibo.py
     homeassistant/components/switch/pulseaudio_loopback.py
     homeassistant/components/switch/rest.py
+    homeassistant/components/switch/rpi_rf.py
+    homeassistant/components/switch/tplink.py
     homeassistant/components/switch/transmission.py
     homeassistant/components/switch/wake_on_lan.py
+    homeassistant/components/thermostat/eq3btsmart.py
     homeassistant/components/thermostat/heatmiser.py
     homeassistant/components/thermostat/homematic.py
     homeassistant/components/thermostat/proliphix.py
     homeassistant/components/thermostat/radiotherm.py
+    homeassistant/components/upnp.py
+    homeassistant/components/zeroconf.py
 
 
 [report]

.dockerignore

@@ -0,0 +1,2 @@
+.tox
+.git

.github/ISSUE_TEMPLATE.md

@@ -1,3 +1,7 @@
+Make sure you are running the latest version of Home Assistant before reporting an issue.
+
+You should only file an issue if you found a bug. Feature and enhancement requests should go in [the Feature Requests section](https://community.home-assistant.io/c/feature-requests) of our community forum:
+
 **Home Assistant release (`hass --version`):**
 
 

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,7 +1,9 @@
 **Description:**
 
 
-**Related issue (if applicable):** #
+**Related issue (if applicable):** fixes #
+
+**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#
 
 **Example entry for `configuration.yaml` (if applicable):**
 ```yaml
@@ -10,7 +12,10 @@
 
 **Checklist:**
 
-If code communicates with devices:
+If user exposed functionality or configuration variables are added/changed:
+  - [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
+
+If code communicates with devices, web services, or a:
   - [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
   - [ ] New dependencies have been added to the `REQUIREMENTS` variable ([example][ex-requir]).
   - [ ] New dependencies are only imported inside functions that use them ([example][ex-import]).
@@ -21,8 +26,5 @@ If the code does not interact with devices:
   - [ ] Local tests with `tox` run successfully. **Your PR cannot be merged unless tests pass**
   - [ ] Tests have been added to verify that the new code works.
 
-[fork]: http://stackoverflow.com/a/7244456
-[squash]: https://github.com/ginatrapani/todo.txt-android/wiki/Squash-All-Commits-Related-to-a-Single-Issue-into-a-Single-Commit
-[ex-requir]: https://github.com/balloob/home-assistant/blob/dev/homeassistant/components/keyboard.py#L16
-[ex-import]: https://github.com/balloob/home-assistant/blob/dev/homeassistant/components/keyboard.py#L51
-
+[ex-requir]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard.py#L16
+[ex-import]: https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/keyboard.py#L51

.gitignore

@@ -1,6 +1,5 @@
 config/*
 !config/home-assistant.conf.default
-homeassistant/components/frontend/www_static/polymer/bower_components/*
 
 # There is not a better solution afaik..
 !config/custom_components
@@ -8,8 +7,12 @@ config/custom_components/*
 !config/custom_components/example.py
 !config/custom_components/hello_world.py
 !config/custom_components/mqtt_example.py
+!config/panels
+config/panels/*
+!config/panels/react.html
 
-tests/config/home-assistant.log
+tests/testing_config/deps
+tests/testing_config/home-assistant.log
 
 # Hide sublime text stuff
 *.sublime-project
@@ -51,7 +54,8 @@ develop-eggs
 lib
 lib64
 
-# Installer logs
+# Logs
+*.log
 pip-log.txt
 
 # Unit test / coverage reports
@@ -78,7 +82,18 @@ nosetests.xml
 pyvenv.cfg
 pip-selfcheck.json
 venv
+.venv
 
 # vimmy stuff
 *.swp
 *.swo
+
+ctags.tmp
+
+# vagrant stuff
+virtualization/vagrant/setup_done
+virtualization/vagrant/.vagrant
+virtualization/vagrant/config
+
+# Visual Studio Code
+.vscode

.gitmodules

@@ -1,3 +1,3 @@
 [submodule "homeassistant/components/frontend/www_static/home-assistant-polymer"]
 	path = homeassistant/components/frontend/www_static/home-assistant-polymer
-	url = https://github.com/balloob/home-assistant-polymer.git
+	url = https://github.com/home-assistant/home-assistant-polymer.git

.travis.yml

@@ -8,8 +8,13 @@ matrix:
       env: TOXENV=requirements
     - python: "3.5"
       env: TOXENV=lint
+    - python: "3.5"
+      env: TOXENV=typing
     - python: "3.5"
       env: TOXENV=py35
+  allow_failures:
+    - python: "3.5"
+      env: TOXENV=typing
 cache:
   directories:
     - $HOME/.cache/pip

CONTRIBUTING.md

@@ -4,84 +4,10 @@ Everybody is invited and welcome to contribute to Home Assistant. There is a lot
 
 The process is straight-forward.
 
- - Fork the Home Assistant [git repository](https://github.com/balloob/home-assistant).
+ - Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
  - Write the code for your device, notification service, sensor, or IoT thing.
  - Ensure tests work.
- - Create a Pull Request against the [**dev**](https://github.com/balloob/home-assistant/tree/dev) branch of Home Assistant.
+ - Create a Pull Request against the [**dev**](https://github.com/home-assistant/home-assistant/tree/dev) branch of Home Assistant.
 
-Still interested? Then you should read the next sections and get more details. 
+Still interested? Then you should take a peak at the [developer documentation](https://home-assistant.io/developers/) to get more details. 
 
-## Adding support for a new device
-
-For help on building your component, please see the [developer documentation](https://home-assistant.io/developers/) on [home-assistant.io](https://home-assistant.io/).
-
-After you finish adding support for your device:
-
- - Check that all dependencies are included via the `REQUIREMENTS` variable in your platform/component and only imported inside functions that use them.
- - Add any new dependencies to `requirements_all.txt` if needed. Use `script/gen_requirements_all.py`.
- - Update the `.coveragerc` file to exclude your platform if there are no tests available or your new code uses a 3rd party library for communication with the device/service/sensor.
- - Provide some documentation for [home-assistant.io](https://home-assistant.io/). It's OK to just add a docstring with configuration details (sample entry for `configuration.yaml` file and alike) to the file header as a start. Visit the [website documentation](https://home-assistant.io/developers/website/) for further information on contributing to [home-assistant.io](https://github.com/balloob/home-assistant.io).
- - Make sure all your code passes ``pylint`` and ``flake8`` (PEP8 and some more) validation. To check your repository, run `tox` or `script/lint`.
- - Create a Pull Request against the [**dev**](https://github.com/balloob/home-assistant/tree/dev) branch of Home Assistant.
- - Check for comments and suggestions on your Pull Request and keep an eye on the [CI output](https://travis-ci.org/balloob/home-assistant/).
-
-If you add a platform for an existing component, there is usually no need for updating the frontend. Only if you've added a new component that should show up in the frontend, there are more steps needed:
-
- - Update the file [`home-assistant-icons.html`](https://github.com/balloob/home-assistant/blob/master/homeassistant/components/frontend/www_static/polymer/resources/home-assistant-icons.html) with an icon for your domain ([pick one from this list](https://www.polymer-project.org/1.0/components/core-elements/demo.html#core-icon)).
- - Update the demo component with two states that it provides.
- - Add your component to `home-assistant.conf.example`.
-
-Since you've updated `home-assistant-icons.html`, you've made changes to the frontend:
-
- - Run `build_frontend`. This will build a new version of the frontend. Make sure you add the changed files `frontend.py` and `frontend.html` to the commit.
-
-### Setting states
-
-It is the responsibility of the component to maintain the states of the devices in your domain. Each device should be a single state and, if possible, a group should be provided that tracks the combined state of the devices.
-
-A state can have several attributes that will help the frontend in displaying your state:
-
- - `friendly_name`: this name will be used as the name of the device
- - `entity_picture`: this picture will be shown instead of the domain icon
- - `unit_of_measurement`: this will be appended to the state in the interface
- - `hidden`: This is a suggestion to the frontend on if the state should be hidden
-
-These attributes are defined in [homeassistant.components](https://github.com/balloob/home-assistant/blob/master/homeassistant/components/__init__.py#L25).
-
-### Proper Visibility Handling
-
-Generally, when creating a new entity for Home Assistant you will want it to be a class that inherits the [homeassistant.helpers.entity.Entity](https://github.com/balloob/home-assistant/blob/master/homeassistant/helpers/entity.py) class. If this is done, visibility will be handled for you. 
-You can set a suggestion for your entity's visibility by setting the hidden property by doing something similar to the following.
-
-```python
-self.hidden = True
-```
-
-This will SUGGEST that the active frontend hides the entity. This requires that the active frontend support hidden cards (the default frontend does) and that the value of hidden be included in your attributes dictionary (see above). The Entity abstract class will take care of this for you.
-
-Remember: The suggestion set by your component's code will always be overwritten by user settings in the configuration.yaml file. This is why you may set hidden to be False, but the property may remain True (or vice-versa).
-
-### Working on the frontend
-
-The frontend is composed of [Polymer](https://www.polymer-project.org) web-components and compiled into the file `frontend.html`. During development you do not want to work with the compiled version but with the seperate files. To have Home Assistant serve the seperate files, set `development=1` for the *http-component* in your config.
-
-When you are done with development and ready to commit your changes, run `build_frontend`, set `development=0` in your config and validate that everything still works.
-
-## Testing your code
-
-To test your code before submission, used the `tox` tool.
-
-```bash
-> pip install -U tox
-> tox
-```
-
-This will run unit tests against python 3.4 and 3.5 (if both are available locally), as well as run a set of tests which validate `pep8` and `pylint` style of the code.
-
-You can optionally run tests on only one tox target using the `-e` option to select an environment.
-
-For instance `tox -e lint` will run the linters only, `tox -e py34` will run unit tests only on python 3.4.
-
-### Notes on PyLint and PEP8 validation
-
-In case a PyLint warning cannot be avoided, add a comment to disable the PyLint check for that line. This can be done using the format `# pylint: disable=YOUR-ERROR-NAME`. Example of an unavoidable PyLint warning is if you do not use the passed in datetime if you're listening for time change.

Dockerfile

@@ -8,9 +8,9 @@ WORKDIR /usr/src/app
 
 RUN pip3 install --no-cache-dir colorlog cython
 
-# For the nmap tracker
+# For the nmap tracker, bluetooth tracker, Z-Wave
 RUN apt-get update && \
-    apt-get install -y --no-install-recommends nmap net-tools cython3 libudev-dev sudo && \
+    apt-get install -y --no-install-recommends nmap net-tools cython3 libudev-dev sudo libglib2.0-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
 
 COPY script/build_python_openzwave script/build_python_openzwave
@@ -19,7 +19,9 @@ RUN script/build_python_openzwave && \
   ln -sf /usr/src/app/build/python-openzwave/openzwave/config /usr/local/share/python-openzwave/config
 
 COPY requirements_all.txt requirements_all.txt
-RUN pip3 install --no-cache-dir -r requirements_all.txt
+# certifi breaks Debian based installs
+RUN pip3 install --no-cache-dir -r requirements_all.txt && pip3 uninstall -y certifi && \
+    pip3 install mysqlclient psycopg2
 
 # Copy source
 COPY . .

README.rst

@@ -1,5 +1,5 @@
-Home Assistant |Build Status| |Coverage Status| |Join the chat at https://gitter.im/balloob/home-assistant|
-===========================================================================================================
+Home Assistant |Build Status| |Coverage Status| |Join the chat at https://gitter.im/home-assistant/home-assistant| |Join the dev chat at https://gitter.im/home-assistant/home-assistant/devs|
+==============================================================================================================================================================================================
 
 Home Assistant is a home automation platform running on Python 3. The
 goal of Home Assistant is to be able to track and control all devices at
@@ -18,7 +18,7 @@ tutorials and documentation.
 
 |screenshot-states|
 
-Examples of devices it can interface it:
+Examples of devices Home Assistant can interface with:
 
 -  Monitoring connected devices to a wireless router:
    `OpenWrt <https://openwrt.org/>`__,
@@ -61,13 +61,13 @@ Examples of devices it can interface it:
 -  `See full list of supported
    devices <https://home-assistant.io/components/>`__
 
-Built home automation on top of your devices:
+Build home automation on top of your devices:
 
 -  Keep a precise history of every change to the state of your house
--  Turn on the lights when people get home after sun set
--  Turn on lights slowly during sun set to compensate for less light
+-  Turn on the lights when people get home after sunset
+-  Turn on lights slowly during sunset to compensate for less light
 -  Turn off all lights and devices when everybody leaves the house
--  Offers a `REST API <https://home-assistant.io/developers/api/>`__
+-  Offers a `REST API <https://home-assistant.io/developers/rest_api/>`__
    and can interface with MQTT for easy integration with other projects
    like `OwnTracks <http://owntracks.org/>`__
 -  Allow sending notifications using
@@ -75,24 +75,26 @@ Built home automation on top of your devices:
    (NMA) <http://www.notifymyandroid.com/>`__,
    `PushBullet <https://www.pushbullet.com/>`__,
    `PushOver <https://pushover.net/>`__, `Slack <https://slack.com/>`__,
-   `Telegram <https://telegram.org/>`__, and `Jabber
+   `Telegram <https://telegram.org/>`__, `Join <http://joaoapps.com/join/>`__, and `Jabber
    (XMPP) <http://xmpp.org>`__
 
-The system is built modular so support for other devices or actions can
+The system is built using a modular approach so support for other devices or actions can
 be implemented easily. See also the `section on
-architecture <https://home-assistant.io/developers/architecture.html>`__
+architecture <https://home-assistant.io/developers/architecture/>`__
 and the `section on creating your own
-components <https://home-assistant.io/developers/creating_components.html>`__.
+components <https://home-assistant.io/developers/creating_components/>`__.
 
 If you run into issues while using Home Assistant or during development
 of a component, check the `Home Assistant help
 section <https://home-assistant.io/help/>`__ how to reach us.
 
-.. |Build Status| image:: https://travis-ci.org/balloob/home-assistant.svg?branch=master
-   :target: https://travis-ci.org/balloob/home-assistant
-.. |Coverage Status| image:: https://img.shields.io/coveralls/balloob/home-assistant.svg
-   :target: https://coveralls.io/r/balloob/home-assistant?branch=master
-.. |Join the chat at https://gitter.im/balloob/home-assistant| image:: https://badges.gitter.im/Join%20Chat.svg
-   :target: https://gitter.im/balloob/home-assistant?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge
-.. |screenshot-states| image:: https://raw.github.com/balloob/home-assistant/master/docs/screenshots.png
+.. |Build Status| image:: https://travis-ci.org/home-assistant/home-assistant.svg?branch=master
+   :target: https://travis-ci.org/home-assistant/home-assistant
+.. |Coverage Status| image:: https://img.shields.io/coveralls/home-assistant/home-assistant.svg
+   :target: https://coveralls.io/r/home-assistant/home-assistant?branch=master
+.. |Join the chat at https://gitter.im/home-assistant/home-assistant| image:: https://img.shields.io/badge/gitter-general-blue.svg
+   :target: https://gitter.im/home-assistant/home-assistant?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge
+.. |Join the dev chat at https://gitter.im/home-assistant/home-assistant/devs| image:: https://img.shields.io/badge/gitter-development-yellowgreen.svg
+   :target: https://gitter.im/home-assistant/home-assistant/devs?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge
+.. |screenshot-states| image:: https://raw.github.com/home-assistant/home-assistant/master/docs/screenshots.png
    :target: https://home-assistant.io/demo/

config/configuration.yaml.example

@@ -1,14 +1,17 @@
 homeassistant:
-  # Omitted values in this section will be auto detected using freegeoip.net
+  # Omitted values in this section will be auto detected using freegeoip.io
 
   # Location required to calculate the time the sun rises and sets.  
-  # Cooridinates are also used for location for weather related components. 
-  # Google Maps can be used to determine more precise GPS cooridinates.
+  # Coordinates are also used for location for weather related components.
+  # Google Maps can be used to determine more precise GPS coordinates.
   latitude: 32.87336
   longitude: 117.22743
 
-  # C for Celcius, F for Fahrenheit
-  temperature_unit: C
+  # Impacts weather/sunrise data
+  elevation: 665
+
+  # 'metric' for Metric System, 'imperial' for imperial system
+  unit_system: metric
 
   # Pick yours from here:
   # http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
@@ -22,6 +25,9 @@ http:
   # Set to 1 to enable development mode
   # development: 1
 
+# Enable the frontend
+frontend:
+
 light:
 #  platform: hue
 
@@ -30,17 +36,12 @@ wink:
   access_token: 'YOUR_TOKEN'
 
 device_tracker:
-  # The following types are available: ddwrt, netgear, tomato, luci,
-  # and nmap_tracker
+  # The following tracker are available:
+  # https://home-assistant.io/components/#presence-detection
   platform: netgear
   host: 192.168.1.1
   username: admin
   password: PASSWORD
-  # http_id is needed for Tomato routers only
-  # http_id: ABCDEFGHH
-  # For nmap_tracker, only the IP addresses to scan are needed:
-  # hosts: 192.168.1.1/24 # netmask prefix notation or
-  # hosts: 192.168.1.1-255 # address range
 
 chromecast:
 
@@ -71,24 +72,25 @@ device_sun_light_trigger:
 # A comma separated list of states that have to be tracked as a single group
 # Grouped states should share the same type of states (ON/OFF or HOME/NOT_HOME)
 # You can also have groups within groups.
+# https://home-assistant.io/components/group/
 group:
-  Home:
-    - group.living_room
-    - group.kitchen
-  living_room:
-    - light.Bowl
-    - light.Ceiling
-    - light.TV_back_light
-  kitchen:
-    - light.fan_bulb_1
-    - light.fan_bulb_2
-  children:
-   - device_tracker.child_1
-   - device_tracker.child_2
+  default_view:
+    view: yes
+    entities:
+      - group.awesome_people
+      - group.climate
 
-process:
-  # items are which processes to look for: <entity_id>: <search string within ps>
-  xbmc: XBMC.App
+  kitchen:
+    name: Kitchen
+    entities:
+      - switch.kitchen_pin_3
+  upstairs:
+    name: Kids
+    icon: mdi:account-multiple
+    view: yes
+    entities:
+      - input_boolean.notify_home
+      - camera.demo_camera
 
 example:
 
@@ -102,6 +104,7 @@ browser:
 
 keyboard:
 
+# https://home-assistant.io/getting-started/automation/
 automation:
 - alias: 'Rule 1 Light on in the evening'
   trigger:
@@ -123,7 +126,6 @@ automation:
     entity_id: group.living_room
 
 - alias: 'Rule 2 - Away Mode'
-
   trigger:
    - platform: state
      entity_id: group.all_devices
@@ -136,6 +138,14 @@ automation:
 
 # Sensors need to be added into the configuration.yaml as sensor:, sensor 2:, sensor 3:, etc. 
 # Each sensor label should be unique or your sensors might not load correctly.
+# Another way to do is to collect all entries under one "sensor:"
+# sensor:
+#   - platform: mqtt
+#     name: "MQTT Sensor 1"
+#   - platform: mqtt
+#     name: "MQTT Sensor 2"
+#
+# Details: https://home-assistant.io/getting-started/devices/
 
 sensor:
   platform: systemmonitor
@@ -146,14 +156,6 @@ sensor:
       arg: '/home'
     - type: 'disk_use'
       arg: '/home'
-    - type: 'disk_free'
-      arg: '/'
-    - type: 'memory_use_percent'
-    - type: 'memory_use'
-    - type: 'memory_free'
-    - type: 'processor_use'
-    - type: 'process'
-      arg: 'octave-cli'
 
 sensor 2:
   platform: forecast
@@ -163,14 +165,6 @@ sensor 2:
     - precip_type
     - precip_intensity
     - temperature
-    - dew_point
-    - wind_speed
-    - wind_bearing
-    - cloud_cover
-    - humidity
-    - pressure
-    - visibility
-    - ozone
 
 script:
   # Turns on the bedroom lights and then the living room lights 1 minute later

config/custom_components/mqtt_example.py

@@ -14,7 +14,7 @@ To use the mqtt_example component you will need to add the following to your
 configuration.yaml file.
 
 mqtt_example:
-  topic: home-assistant/mqtt_example
+  topic: "home-assistant/mqtt_example"
 """
 import homeassistant.loader as loader
 
@@ -29,7 +29,7 @@ DEFAULT_TOPIC = 'home-assistant/mqtt_example'
 
 
 def setup(hass, config):
-    """Setup the  MQTT example component."""
+    """Setup the MQTT example component."""
     mqtt = loader.get_component('mqtt')
     topic = config[DOMAIN].get('topic', DEFAULT_TOPIC)
     entity_id = 'mqtt_example.last_message'

config/panels/react.html

@@ -0,0 +1,432 @@
+<!--
+Custom Home Assistant panel example.
+
+Currently only works in Firefox and Chrome because it uses ES6.
+
+Make sure this file is in <config>/panels/react.html
+
+Add to your configuration.yaml:
+
+panel_custom:
+  - name: react
+    sidebar_title: TodoMVC
+    sidebar_icon: mdi:checkbox-marked-outline
+    config:
+      title: Wow hello!
+-->
+
+<script src="https://fb.me/react-15.2.1.min.js"></script>
+<script src="https://fb.me/react-dom-15.2.1.min.js"></script>
+
+<!-- for development, replace with:
+<script src="https://fb.me/react-15.2.1.js"></script>
+<script src="https://fb.me/react-dom-15.2.1.js"></script>
+-->
+
+<!--
+  CSS taken from ReactJS TodoMVC example by Pete Hunt
+  http://todomvc.com/examples/react/
+-->
+
+<style>
+  .todoapp input[type="checkbox"] {
+    outline: none;
+  }
+
+  .todoapp {
+    background: #fff;
+    margin: 130px 0 40px 0;
+    position: relative;
+    box-shadow: 0 2px 4px 0 rgba(0, 0, 0, 0.2),
+                0 25px 50px 0 rgba(0, 0, 0, 0.1);
+  }
+
+  .todoapp h1 {
+    position: absolute;
+    top: -155px;
+    width: 100%;
+    font-size: 100px;
+    font-weight: 100;
+    text-align: center;
+    color: rgba(175, 47, 47, 0.15);
+    -webkit-text-rendering: optimizeLegibility;
+    -moz-text-rendering: optimizeLegibility;
+    text-rendering: optimizeLegibility;
+  }
+
+  .todoapp .main {
+    position: relative;
+    border-top: 1px solid #e6e6e6;
+  }
+
+  .todoapp .todo-list {
+    margin: 0;
+    padding: 0;
+    list-style: none;
+  }
+
+  .todoapp .todo-list li {
+    position: relative;
+    font-size: 24px;
+    border-bottom: 1px solid #ededed;
+  }
+
+  .todoapp .todo-list li:last-child {
+    border-bottom: none;
+  }
+
+  .todoapp .todo-list li .toggle {
+    text-align: center;
+    width: 40px;
+    /* auto, since non-WebKit browsers doesn't support input styling */
+    height: auto;
+    position: absolute;
+    top: 0;
+    bottom: 0;
+    margin: auto 0;
+    border: none; /* Mobile Safari */
+    -webkit-appearance: none;
+    appearance: none;
+    cursor: pointer;
+  }
+
+  .todoapp .todo-list li .toggle:focus {
+    border-left: 3px solid rgba(175, 47, 47, 0.35);
+  }
+
+  .todoapp .todo-list li .toggle:after {
+    content: url('data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="40" height="40" viewBox="-10 -18 100 135"><circle cx="50" cy="50" r="50" fill="none" stroke="#ededed" stroke-width="3"/></svg>');
+  }
+
+  .todoapp .todo-list li .toggle:checked:after {
+    content: url('data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" width="40" height="40" viewBox="-10 -18 100 135"><circle cx="50" cy="50" r="50" fill="none" stroke="#bddad5" stroke-width="3"/><path fill="#5dc2af" d="M72 25L42 71 27 56l-4 4 20 20 34-52z"/></svg>');
+  }
+
+  .todoapp .todo-list li label {
+    white-space: pre-line;
+    word-break: break-all;
+    padding: 15px 60px 15px 15px;
+    margin-left: 45px;
+    display: block;
+    line-height: 1.2;
+    transition: color 0.4s;
+  }
+
+  .todoapp .todo-list li.completed label {
+    color: #d9d9d9;
+    text-decoration: line-through;
+  }
+
+  .todoapp .footer {
+    color: #777;
+    padding: 10px 15px;
+    height: 20px;
+    text-align: center;
+    border-top: 1px solid #e6e6e6;
+  }
+
+  .todoapp .footer:before {
+    content: '';
+    position: absolute;
+    right: 0;
+    bottom: 0;
+    left: 0;
+    height: 50px;
+    overflow: hidden;
+    box-shadow: 0 1px 1px rgba(0, 0, 0, 0.2),
+                0 8px 0 -3px #f6f6f6,
+                0 9px 1px -3px rgba(0, 0, 0, 0.2),
+                0 16px 0 -6px #f6f6f6,
+                0 17px 2px -6px rgba(0, 0, 0, 0.2);
+  }
+
+  .todoapp .todo-count {
+    float: left;
+    text-align: left;
+    font-weight: 300;
+  }
+
+  .todoapp .toggle-menu {
+    position: absolute;
+    right: 15px;
+    font-weight: 300;
+    color: rgba(175, 47, 47, 0.75);
+  }
+
+  .todoapp .filters {
+    margin: 0;
+    padding: 0;
+    list-style: none;
+    position: absolute;
+    right: 0;
+    left: 0;
+  }
+
+  .todoapp .filters li {
+    display: inline;
+  }
+
+  .todoapp .filters li a {
+    color: inherit;
+    margin: 3px;
+    padding: 3px 7px;
+    text-decoration: none;
+    border: 1px solid transparent;
+    border-radius: 3px;
+  }
+
+  .todoapp .filters li a.selected,
+  .filters li a:hover {
+    border-color: rgba(175, 47, 47, 0.1);
+  }
+
+  .todoapp .filters li a.selected {
+    border-color: rgba(175, 47, 47, 0.2);
+  }
+
+  /*
+    Hack to remove background from Mobile Safari.
+    Can't use it globally since it destroys checkboxes in Firefox
+  */
+  @media screen and (-webkit-min-device-pixel-ratio:0) {
+    .todoapp .toggle-all,
+    .todoapp .todo-list li .toggle {
+      background: none;
+    }
+
+    .todoapp .todo-list li .toggle {
+      height: 40px;
+    }
+
+    .todoapp .toggle-all {
+      -webkit-transform: rotate(90deg);
+      transform: rotate(90deg);
+      -webkit-appearance: none;
+      appearance: none;
+    }
+  }
+
+  @media (max-width: 430px) {
+    .todoapp .footer {
+      height: 50px;
+    }
+
+    .todoapp .filters {
+      bottom: 10px;
+    }
+  }
+</style>
+
+<dom-module id='ha-panel-react'>
+  <template>
+    <style>
+      :host {
+        background: #f5f5f5;
+        display: block;
+        height: 100%;
+        overflow: auto;
+      }
+      .mount {
+        font: 14px 'Helvetica Neue', Helvetica, Arial, sans-serif;
+        line-height: 1.4em;
+        color: #4d4d4d;
+        min-width: 230px;
+        max-width: 550px;
+        margin: 0 auto;
+        -webkit-font-smoothing: antialiased;
+        -moz-font-smoothing: antialiased;
+        font-smoothing: antialiased;
+        font-weight: 300;
+      }
+    </style>
+    <div id='mount' class='mount'></div>
+  </template>
+</dom-module>
+
+<script>
+// Example uses ES6. Will only work in modern browsers
+class TodoMVC extends React.Component {
+  constructor(props) {
+    super(props);
+
+    this.state = {
+      filter: 'all',
+      // load initial value of entities
+      entities: this.props.hass.reactor.evaluate(
+        this.props.hass.entityGetters.visibleEntityMap),
+    };
+  }
+
+  componentDidMount() {
+    // register to entity updates
+    this._unwatchHass = this.props.hass.reactor.observe(
+      this.props.hass.entityGetters.visibleEntityMap,
+      entities => this.setState({entities}))
+  }
+
+  componentWillUnmount() {
+    // unregister to entity updates
+    this._unwatchHass();
+  }
+
+  handlePickFilter(filter, ev) {
+    ev.preventDefault();
+    this.setState({filter});
+  }
+
+  handleEntityToggle(entity, ev) {
+    this.props.hass.serviceActions.callService(
+      entity.domain, 'toggle', { entity_id: entity.entityId });
+  }
+
+  handleToggleMenu(ev) {
+    ev.preventDefault();
+    Polymer.Base.fire('open-menu', null, {node: ev.target});
+  }
+
+  entityRow(entity) {
+    const completed = entity.state === 'on';
+
+    return React.createElement(
+      'li', {
+        className: completed && 'completed',
+        key: entity.entityId,
+      },
+      React.createElement(
+        "div", { className: "view" },
+        React.createElement(
+          "input", {
+            checked: completed,
+            className: "toggle",
+            type: "checkbox",
+            onChange: ev => this.handleEntityToggle(entity, ev),
+          }),
+        React.createElement("label", null, entity.entityDisplay)));
+  }
+
+  filterRow(filter) {
+    return React.createElement(
+      "li", { key: filter },
+      React.createElement(
+        "a", {
+          href: "#",
+          className: this.state.filter === filter && "selected",
+          onClick: ev => this.handlePickFilter(filter, ev),
+        },
+        filter.substring(0, 1).toUpperCase() + filter.substring(1)
+      )
+    );
+  }
+
+  render() {
+    const { entities, filter } = this.state;
+
+    if (!entities) return null;
+
+    const filters = ['all', 'light', 'switch'];
+
+    const showEntities = filter === 'all' ?
+      entities.filter(ent => filters.includes(ent.domain)) :
+      entities.filter(ent => ent.domain == filter);
+
+    return React.createElement(
+      'div', { className: 'todoapp-wrapper' },
+      React.createElement(
+        "section", { className: "todoapp" },
+        React.createElement(
+          "div", null,
+          React.createElement(
+            "header", { className: "header" },
+            React.createElement("h1", null, this.props.title || "todos")
+          ),
+          React.createElement(
+            "section", { className: "main" },
+            React.createElement(
+              "ul", { className: "todo-list" },
+              showEntities.valueSeq().map(ent => this.entityRow(ent)))
+            )
+          ),
+          React.createElement(
+            "footer", { className: "footer" },
+            React.createElement(
+              "span", { className: "todo-count" },
+              showEntities.filter(ent => ent.state === 'off').size + " items left"
+            ),
+            React.createElement(
+              "ul", { className: "filters" },
+              filters.map(filter => this.filterRow(filter))
+            ),
+            !this.props.showMenu && React.createElement(
+              "a", {
+                className: "toggle-menu",
+                href: '#',
+                onClick: ev => this.handleToggleMenu(ev),
+              },
+              "Show menu"
+            )
+          )
+        ));
+  }
+}
+
+Polymer({
+  is: 'ha-panel-react',
+
+  properties: {
+    // Home Assistant object
+    hass: {
+      type: Object,
+    },
+
+    // If should render in narrow mode
+    narrow: {
+      type: Boolean,
+      value: false,
+    },
+
+    // If sidebar is currently shown
+    showMenu: {
+      type: Boolean,
+      value: false,
+    },
+
+    // Home Assistant panel info
+    // panel.config contains config passed to register_panel serverside
+    panel: {
+      type: Object,
+    }
+  },
+
+  // This will make sure we forward changed properties to React
+  observers: [
+    'propsChanged(hass, narrow, showMenu, panel)',
+  ],
+
+  // Mount React when element attached
+  attached: function () {
+    this.mount(this.hass, this.narrow, this.showMenu, this.panel);
+  },
+
+  // Called when properties change
+  propsChanged: function (hass, narrow, showMenu, panel) {
+    this.mount(hass, narrow, showMenu, panel);
+  },
+
+  // Render React. Debounce in case multiple properties change.
+  mount: function (hass, narrow, showMenu, panel) {
+    this.debounce('mount', function () {
+      ReactDOM.render(React.createElement(TodoMVC, {
+        hass: hass,
+        narrow: narrow,
+        showMenu: showMenu,
+        title: panel.config ? panel.config.title : null
+      }), this.$.mount);
+    }.bind(this));
+  },
+
+  // Unmount React node when panel no longer in use.
+  detached: function () {
+    ReactDOM.unmountComponentAtNode(this.$.mount);
+  },
+});
+</script>

docs/swagger.yaml

@@ -0,0 +1,568 @@
+swagger: '2.0'
+info:
+  title: Home Assistant
+  description: Home Assistant REST API
+  version: "1.0.0"
+# the domain of the service
+host: localhost:8123
+
+# array of all schemes that your API supports
+schemes:
+  - http
+  - https
+
+securityDefinitions:
+  api_key:
+    type: apiKey
+    description: API password
+    name: api_password
+    in: query
+  
+  # api_key:
+  #  type: apiKey
+  #  description: API password
+  #  name: x-ha-access
+  #  in: header
+
+# will be prefixed to all paths
+basePath: /api
+
+consumes:
+  - application/json
+produces:
+  - application/json
+paths:
+  /:
+    get:
+      summary: API alive message
+      description: Returns message if API is up and running.
+      tags:
+        - Core
+      responses:
+        200:
+          description: API is up and running
+          schema:
+            $ref: '#/definitions/Message'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /config:
+    get:
+      summary: API alive message
+      description: Returns the current configuration as JSON.
+      tags:
+        - Core
+      responses:
+        200:
+          description: Current configuration
+          schema:
+            $ref: '#/definitions/ApiConfig'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /discovery_info:
+    get:
+      summary: Basic information about Home Assistant instance
+      tags:
+        - Core
+      responses:
+        200:
+          description: Basic information
+          schema:
+            $ref: '#/definitions/DiscoveryInfo'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /bootstrap:
+    get:
+      summary: Returns all data needed to bootstrap Home Assistant.
+      tags:
+        - Core
+      responses:
+        200:
+          description: Bootstrap information
+          schema:
+            $ref: '#/definitions/BootstrapInfo'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /events:
+    get:
+      summary: Array of event objects.
+      description: Returns an array of event objects. Each event object contain event name and listener count.
+      tags:
+        - Events
+      responses:
+        200:
+          description: Events
+          schema:
+            type: array
+            items:
+              $ref: '#/definitions/Event'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /services:
+    get:
+      summary: Array of service objects.
+      description: Returns an array of service objects. Each object contains the domain and which services it contains.
+      tags:
+        - Services
+      responses:
+        200:
+          description: Services
+          schema:
+            type: array
+            items:
+              $ref: '#/definitions/Service'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /history:
+    get:
+      summary: Array of state changes in the past.
+      description: Returns an array of state changes in the past. Each object contains further detail for the entities.
+      tags:
+        - State
+      responses:
+        200:
+          description: State changes
+          schema:
+            type: array
+            items:
+              $ref: '#/definitions/History'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /states:
+    get:
+      summary: Array of state objects.
+      description: |
+        Returns an array of state objects. Each state has the following attributes: entity_id, state, last_changed and attributes.
+      tags:
+        - State
+      responses:
+        200:
+          description: States
+          schema:
+            type: array
+            items:
+              $ref: '#/definitions/State'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /states/{entity_id}:
+    get:
+      summary: Specific state object.
+      description: |
+        Returns a state object for specified entity_id.
+      tags:
+        - State
+      parameters:
+      - name: entity_id
+        in: path
+        description: entity_id of the entity to query
+        required: true
+        type: string
+      responses:
+        200:
+          description: State
+          schema:
+            $ref: '#/definitions/State'
+        404:
+          description: Not found
+          schema:
+            $ref: '#/definitions/Message'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+    post:
+      description: |
+        Updates or creates the current state of an entity.
+      tags:
+        - State
+      consumes:
+        - application/json
+      parameters:
+      - name: entity_id
+        in: path
+        description: entity_id to set the state of
+        required: true
+        type: string
+      - $ref: '#/parameters/State'
+      responses:
+        200:
+          description: State of existing entity was set
+          schema:
+            $ref: '#/definitions/State'
+        201:
+          description: State of new entity was set
+          schema:
+            $ref: '#/definitions/State'
+          headers:
+            location:
+              type: string
+              description: location of the new entity
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /error_log:
+    get:
+      summary: Error log
+      description: |
+        Retrieve all errors logged during the current session of Home Assistant as a plaintext response.
+      tags:
+        - Core
+      produces:
+        - text/plain
+      responses:
+        200:
+          description: Plain text error log
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /camera_proxy/camera.{entity_id}:
+    get:
+      summary: Camera image.
+      description: |
+        Returns the data (image) from the specified camera entity_id.
+      tags:
+        - Camera
+      produces:
+        - image/jpeg
+      parameters:
+      - name: entity_id
+        in: path
+        description: entity_id of the camera to query
+        required: true
+        type: string
+      responses:
+        200:
+          description: Camera image
+          schema:
+            type: file
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /events/{event_type}:
+    post:
+      description: |
+        Fires an event with event_type
+      tags:
+        - Events
+      consumes:
+        - application/json
+      parameters:
+      - name: event_type
+        in: path
+        description: event_type to fire event with
+        required: true
+        type: string
+      - $ref: '#/parameters/EventData'
+      responses:
+        200:
+          description: Response message
+          schema:
+            $ref: '#/definitions/Message'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /services/{domain}/{service}:
+    post:
+      description: |
+        Calls a service within a specific domain. Will return when the service has been executed or 10 seconds has past, whichever comes first.
+      tags:
+        - Services
+      consumes:
+        - application/json
+      parameters:
+      - name: domain
+        in: path
+        description: domain of the service
+        required: true
+        type: string
+      - name: service
+        in: path
+        description: service to call
+        required: true
+        type: string
+      - $ref: '#/parameters/ServiceData'
+      responses:
+        200:
+          description: List of states that have changed while the service was being executed. The result will include any changed states that changed while the service was being executed, even if their change was the result of something else happening in the system.
+          schema:
+            type: array
+            items:
+              $ref: '#/definitions/State'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /template:
+    post:
+      description: |
+        Render a Home Assistant template.
+      tags:
+        - Template
+      consumes:
+        - application/json
+      produces:
+        - text/plain
+      parameters:
+      - $ref: '#/parameters/Template'
+      responses:
+        200:
+          description: Returns the rendered template in plain text.
+          schema:
+            type: string
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /event_forwarding:
+    post:
+      description: |
+        Setup event forwarding to another Home Assistant instance.
+      tags:
+        - Core
+      consumes:
+        - application/json
+      parameters:
+      - $ref: '#/parameters/EventForwarding'
+      responses:
+        200:
+          description: It will return a message if event forwarding was setup successful.
+          schema:
+            $ref: '#/definitions/Message'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+    delete:
+      description: |
+        Cancel event forwarding to another Home Assistant instance.
+      tags:
+        - Core
+      consumes:
+        - application/json
+      parameters:
+      - $ref: '#/parameters/EventForwarding'
+      responses:
+        200:
+          description: It will return a message if event forwarding was cancelled successful.
+          schema:
+            $ref: '#/definitions/Message'
+        default:
+          description: Error
+          schema:
+            $ref: '#/definitions/Message'
+  /stream:
+    get:
+      summary: Server-sent events
+      description: The server-sent events feature is a one-way channel from your Home Assistant server to a client which is acting as a consumer.
+      tags:
+        - Core
+        - Events
+      produces:
+        - text/event-stream
+      parameters:
+        - name: restrict
+          in: query
+          description: comma-separated list of event_types to filter
+          required: false
+          type: string
+      responses:
+        default:
+          description: Stream of events
+          schema:
+            type: object
+            x-events:
+              state_changed:
+                type: object
+                properties:
+                  entity_id:
+                    type: string
+                  old_state:
+                    $ref: '#/definitions/State'
+                  new_state:
+                    $ref: '#/definitions/State'
+definitions:
+  ApiConfig:
+    type: object
+    properties:
+      components:
+        type: array
+        description: List of component types
+        items:
+          type: string
+          description: Component type
+      latitude:
+        type: number
+        format: float
+        description: Latitude of Home Assistant server
+      longitude:
+        type: number
+        format: float
+        description: Longitude of Home Assistant server
+      location_name:
+        type: string
+      unit_system:
+        type: string
+        description: The system for measurement units
+      time_zone:
+        type: string
+      version:
+        type: string
+  DiscoveryInfo:
+    type: object
+    properties:
+      base_url:
+        type: string
+      location_name:
+        type: string
+      requires_api_password:
+        type: boolean
+      version:
+        type: string
+  BootstrapInfo:
+    type: object
+    properties:
+      config:
+        $ref: '#/definitions/ApiConfig'
+      events:
+        type: array
+        items:
+          $ref: '#/definitions/Event'
+      services:
+        type: array
+        items:
+          $ref: '#/definitions/Service'
+      states:
+        type: array
+        items:
+          $ref: '#/definitions/State'
+  Event:
+    type: object
+    properties:
+      event:
+        type: string
+      listener_count:
+        type: integer
+  Service:
+    type: object
+    properties:
+      domain:
+        type: string
+      services:
+        type: object
+        additionalProperties:
+          $ref: '#/definitions/DomainService'
+  DomainService:
+    type: object
+    properties:
+      description:
+        type: string
+      fields:
+        type: object
+        description: Object with service fields that can be called
+  State:
+    type: object
+    properties:
+      attributes:
+        $ref: '#/definitions/StateAttributes'
+      state:
+        type: string
+      entity_id:
+        type: string
+      last_changed:
+        type: string
+        format: date-time
+  StateAttributes:
+    type: object
+    additionalProperties:
+      type: string
+  History:
+    allOf:
+    - $ref: '#/definitions/State'
+    - type: object
+      properties:
+        last_updated:
+            type: string
+            format: date-time
+  Message:
+    type: object
+    properties:
+      message:
+        type: string
+parameters:
+  State:
+    name: body
+    in: body
+    description: State parameter
+    required: false
+    schema:
+      type: object
+      required:
+      - state
+      properties:
+        attributes:
+          $ref: '#/definitions/StateAttributes'
+        state:
+          type: string
+  EventData:
+    name: body
+    in: body
+    description: event_data
+    required: false
+    schema:
+      type: object
+  ServiceData:
+    name: body
+    in: body
+    description: service_data
+    required: false
+    schema:
+      type: object
+  Template:
+    name: body
+    in: body
+    description: Template to render
+    required: true
+    schema:
+      type: object
+      required:
+      - template
+      properties:
+        template:
+          description: Jinja2 template string
+          type: string
+  EventForwarding:
+    name: body
+    in: body
+    description: Event Forwarding parameter
+    required: true
+    schema:
+      type: object
+      required:
+      - host
+      - api_password
+      properties:
+        host:
+          type: string
+        api_password:
+          type: string
+        port:
+          type: integer

homeassistant/__main__.py

@@ -3,14 +3,13 @@ from __future__ import print_function
 
 import argparse
 import os
-import signal
+import platform
+import subprocess
 import sys
 import threading
-import time
-from multiprocessing import Process
 
-import homeassistant.config as config_util
-from homeassistant import bootstrap
+from typing import Optional, List
+
 from homeassistant.const import (
     __version__,
     EVENT_HOMEASSISTANT_START,
@@ -19,7 +18,7 @@ from homeassistant.const import (
 )
 
 
-def validate_python():
+def validate_python() -> None:
     """Validate we're running the right Python version."""
     major, minor = sys.version_info[:2]
     req_major, req_minor = REQUIRED_PYTHON_VER
@@ -30,9 +29,10 @@ def validate_python():
         sys.exit(1)
 
 
-def ensure_config_path(config_dir):
+def ensure_config_path(config_dir: str) -> None:
     """Validate the configuration directory."""
-    lib_dir = os.path.join(config_dir, 'lib')
+    import homeassistant.config as config_util
+    lib_dir = os.path.join(config_dir, 'deps')
 
     # Test if configuration directory exists
     if not os.path.isdir(config_dir):
@@ -58,8 +58,9 @@ def ensure_config_path(config_dir):
             sys.exit(1)
 
 
-def ensure_config_file(config_dir):
+def ensure_config_file(config_dir: str) -> str:
     """Ensure configuration file exists."""
+    import homeassistant.config as config_util
     config_path = config_util.ensure_config_exists(config_dir)
 
     if config_path is None:
@@ -69,8 +70,9 @@ def ensure_config_file(config_dir):
     return config_path
 
 
-def get_arguments():
+def get_arguments() -> argparse.Namespace:
     """Get parsed passed in arguments."""
+    import homeassistant.config as config_util
     parser = argparse.ArgumentParser(
         description="Home Assistant: Observe, Control, Automate.")
     parser.add_argument('--version', action='version', version=__version__)
@@ -86,8 +88,7 @@ def get_arguments():
     parser.add_argument(
         '--debug',
         action='store_true',
-        help='Start Home Assistant in debug mode. Runs in single process to '
-        'enable use of interactive debuggers.')
+        help='Start Home Assistant in debug mode')
     parser.add_argument(
         '--open-ui',
         action='store_true',
@@ -111,30 +112,27 @@ def get_arguments():
         default=None,
         help='Enables daily log rotation and keeps up to the specified days')
     parser.add_argument(
-        '--install-osx',
+        '--runner',
         action='store_true',
-        help='Installs as a service on OS X and loads on boot.')
+        help='On restart exit with code {}'.format(RESTART_EXIT_CODE))
     parser.add_argument(
-        '--uninstall-osx',
-        action='store_true',
-        help='Uninstalls from OS X.')
-    parser.add_argument(
-        '--restart-osx',
-        action='store_true',
-        help='Restarts on OS X.')
-    if os.name != "nt":
+        '--script',
+        nargs=argparse.REMAINDER,
+        help='Run one of the embedded scripts')
+    if os.name == "posix":
         parser.add_argument(
             '--daemon',
             action='store_true',
             help='Run Home Assistant as daemon')
 
     arguments = parser.parse_args()
-    if os.name == "nt":
-        arguments.daemon = False
+    if os.name != "posix" or arguments.debug or arguments.runner:
+        setattr(arguments, 'daemon', False)
+
     return arguments
 
 
-def daemonize():
+def daemonize() -> None:
     """Move current process to daemon process."""
     # Create first fork
     pid = os.fork()
@@ -143,15 +141,23 @@ def daemonize():
 
     # Decouple fork
     os.setsid()
-    os.umask(0)
 
     # Create second fork
     pid = os.fork()
     if pid > 0:
         sys.exit(0)
 
+    # redirect standard file descriptors to devnull
+    infd = open(os.devnull, 'r')
+    outfd = open(os.devnull, 'a+')
+    sys.stdout.flush()
+    sys.stderr.flush()
+    os.dup2(infd.fileno(), sys.stdin.fileno())
+    os.dup2(outfd.fileno(), sys.stdout.fileno())
+    os.dup2(outfd.fileno(), sys.stderr.fileno())
 
-def check_pid(pid_file):
+
+def check_pid(pid_file: str) -> None:
     """Check that HA is not already running."""
     # Check pid file
     try:
@@ -160,6 +166,10 @@ def check_pid(pid_file):
         # PID File does not exist
         return
 
+    # If we just restarted, we just found our own pidfile.
+    if pid == os.getpid():
+        return
+
     try:
         os.kill(pid, 0)
     except OSError:
@@ -169,7 +179,7 @@ def check_pid(pid_file):
     sys.exit(1)
 
 
-def write_pid(pid_file):
+def write_pid(pid_file: str) -> None:
     """Create a PID File."""
     pid = os.getpid()
     try:
@@ -179,67 +189,65 @@ def write_pid(pid_file):
         sys.exit(1)
 
 
-def install_osx():
-    """Setup to run via launchd on OS X."""
-    with os.popen('which hass') as inp:
-        hass_path = inp.read().strip()
+def closefds_osx(min_fd: int, max_fd: int) -> None:
+    """Make sure file descriptors get closed when we restart.
 
-    with os.popen('whoami') as inp:
-        user = inp.read().strip()
-
-    cwd = os.path.dirname(__file__)
-    template_path = os.path.join(cwd, 'startup', 'launchd.plist')
-
-    with open(template_path, 'r', encoding='utf-8') as inp:
-        plist = inp.read()
-
-    plist = plist.replace("$HASS_PATH$", hass_path)
-    plist = plist.replace("$USER$", user)
-
-    path = os.path.expanduser("~/Library/LaunchAgents/org.homeassistant.plist")
-
-    try:
-        with open(path, 'w', encoding='utf-8') as outp:
-            outp.write(plist)
-    except IOError as err:
-        print('Unable to write to ' + path, err)
-        return
-
-    os.popen('launchctl load -w -F ' + path)
-
-    print("Home Assistant has been installed. \
-        Open it here: http://localhost:8123")
-
-
-def uninstall_osx():
-    """Unload from launchd on OS X."""
-    path = os.path.expanduser("~/Library/LaunchAgents/org.homeassistant.plist")
-    os.popen('launchctl unload ' + path)
-
-    print("Home Assistant has been uninstalled.")
-
-
-def setup_and_run_hass(config_dir, args, top_process=False):
-    """Setup HASS and run.
-
-    Block until stopped. Will assume it is running in a subprocess unless
-    top_process is set to true.
+    We cannot call close on guarded fds, and we cannot easily test which fds
+    are guarded. But we can set the close-on-exec flag on everything we want to
+    get rid of.
     """
+    from fcntl import fcntl, F_GETFD, F_SETFD, FD_CLOEXEC
+
+    for _fd in range(min_fd, max_fd):
+        try:
+            val = fcntl(_fd, F_GETFD)
+            if not val & FD_CLOEXEC:
+                fcntl(_fd, F_SETFD, val | FD_CLOEXEC)
+        except IOError:
+            pass
+
+
+def cmdline() -> List[str]:
+    """Collect path and arguments to re-execute the current hass instance."""
+    if sys.argv[0].endswith('/__main__.py'):
+        modulepath = os.path.dirname(sys.argv[0])
+        os.environ['PYTHONPATH'] = os.path.dirname(modulepath)
+    return [sys.executable] + [arg for arg in sys.argv if arg != '--daemon']
+
+
+def setup_and_run_hass(config_dir: str,
+                       args: argparse.Namespace) -> Optional[int]:
+    """Setup HASS and run."""
+    from homeassistant import bootstrap
+
+    # Run a simple daemon runner process on Windows to handle restarts
+    if os.name == 'nt' and '--runner' not in sys.argv:
+        nt_args = cmdline() + ['--runner']
+        while True:
+            try:
+                subprocess.check_call(nt_args)
+                sys.exit(0)
+            except subprocess.CalledProcessError as exc:
+                if exc.returncode != RESTART_EXIT_CODE:
+                    sys.exit(exc.returncode)
+
     if args.demo_mode:
         config = {
             'frontend': {},
             'demo': {}
         }
         hass = bootstrap.from_config_dict(
-            config, config_dir=config_dir, daemon=args.daemon,
-            verbose=args.verbose, skip_pip=args.skip_pip,
-            log_rotate_days=args.log_rotate_days)
+            config, config_dir=config_dir, verbose=args.verbose,
+            skip_pip=args.skip_pip, log_rotate_days=args.log_rotate_days)
     else:
         config_file = ensure_config_file(config_dir)
         print('Config directory:', config_dir)
         hass = bootstrap.from_config_file(
-            config_file, daemon=args.daemon, verbose=args.verbose,
-            skip_pip=args.skip_pip, log_rotate_days=args.log_rotate_days)
+            config_file, verbose=args.verbose, skip_pip=args.skip_pip,
+            log_rotate_days=args.log_rotate_days)
+
+    if hass is None:
+        return None
 
     if args.open_ui:
         def open_browser(event):
@@ -253,64 +261,64 @@ def setup_and_run_hass(config_dir, args, top_process=False):
     hass.start()
     exit_code = int(hass.block_till_stopped())
 
-    if not top_process:
-        sys.exit(exit_code)
     return exit_code
 
 
-def run_hass_process(hass_proc):
-    """Run a child hass process. Returns True if it should be restarted."""
-    requested_stop = threading.Event()
-    hass_proc.daemon = True
-
-    def request_stop(*args):
-        """Request hass stop, *args is for signal handler callback."""
-        requested_stop.set()
-        hass_proc.terminate()
+def try_to_restart() -> None:
+    """Attempt to clean up state and start a new homeassistant instance."""
+    # Things should be mostly shut down already at this point, now just try
+    # to clean up things that may have been left behind.
+    sys.stderr.write('Home Assistant attempting to restart.\n')
 
+    # Count remaining threads, ideally there should only be one non-daemonized
+    # thread left (which is us). Nothing we really do with it, but it might be
+    # useful when debugging shutdown/restart issues.
     try:
-        signal.signal(signal.SIGTERM, request_stop)
+        nthreads = sum(thread.is_alive() and not thread.daemon
+                       for thread in threading.enumerate())
+        if nthreads > 1:
+            sys.stderr.write(
+                "Found {} non-daemonic threads.\n".format(nthreads))
+
+    # Somehow we sometimes seem to trigger an assertion in the python threading
+    # module. It seems we find threads that have no associated OS level thread
+    # which are not marked as stopped at the python level.
+    except AssertionError:
+        sys.stderr.write("Failed to count non-daemonic threads.\n")
+
+    # Try to not leave behind open filedescriptors with the emphasis on try.
+    try:
+        max_fd = os.sysconf("SC_OPEN_MAX")
     except ValueError:
-        print('Could not bind to SIGTERM. Are you running in a thread?')
+        max_fd = 256
 
-    hass_proc.start()
-    try:
-        hass_proc.join()
-    except KeyboardInterrupt:
-        request_stop()
-        try:
-            hass_proc.join()
-        except KeyboardInterrupt:
-            return False
+    if platform.system() == 'Darwin':
+        closefds_osx(3, max_fd)
+    else:
+        os.closerange(3, max_fd)
 
-    return (not requested_stop.isSet() and
-            hass_proc.exitcode == RESTART_EXIT_CODE,
-            hass_proc.exitcode)
+    # Now launch into a new instance of Home-Assistant. If this fails we
+    # fall through and exit with error 100 (RESTART_EXIT_CODE) in which case
+    # systemd will restart us when RestartForceExitStatus=100 is set in the
+    # systemd.service file.
+    sys.stderr.write("Restarting Home-Assistant\n")
+    args = cmdline()
+    os.execv(args[0], args)
 
 
-def main():
+def main() -> int:
     """Start Home Assistant."""
     validate_python()
 
     args = get_arguments()
 
+    if args.script is not None:
+        from homeassistant import scripts
+        return scripts.run(args.script)
+
     config_dir = os.path.join(os.getcwd(), args.config)
     ensure_config_path(config_dir)
 
-    # OS X launchd functions
-    if args.install_osx:
-        install_osx()
-        return 0
-    if args.uninstall_osx:
-        uninstall_osx()
-        return 0
-    if args.restart_osx:
-        uninstall_osx()
-        # A small delay is needed on some systems to let the unload finish.
-        time.sleep(0.5)
-        install_osx()
-        return 0
-
     # Daemon functions
     if args.pid_file:
         check_pid(args.pid_file)
@@ -319,21 +327,10 @@ def main():
     if args.pid_file:
         write_pid(args.pid_file)
 
-    # Run hass in debug mode if requested
-    if args.debug:
-        sys.stderr.write('Running in debug mode. '
-                         'Home Assistant will not be able to restart.\n')
-        exit_code = setup_and_run_hass(config_dir, args, top_process=True)
-        if exit_code == RESTART_EXIT_CODE:
-            sys.stderr.write('Home Assistant requested a '
-                             'restart in debug mode.\n')
-        return exit_code
+    exit_code = setup_and_run_hass(config_dir, args)
+    if exit_code == RESTART_EXIT_CODE and not args.runner:
+        try_to_restart()
 
-    # Run hass as child process. Restart if necessary.
-    keep_running = True
-    while keep_running:
-        hass_proc = Process(target=setup_and_run_hass, args=(config_dir, args))
-        keep_running, exit_code = run_hass_process(hass_proc)
     return exit_code
 
 

homeassistant/bootstrap.py

@@ -3,25 +3,26 @@
 import logging
 import logging.handlers
 import os
-import shutil
 import sys
 from collections import defaultdict
 from threading import RLock
 
+from types import ModuleType
+from typing import Any, Optional, Dict
+
+import voluptuous as vol
+from voluptuous.humanize import humanize_error
+
 import homeassistant.components as core_components
-import homeassistant.components.group as group
-import homeassistant.config as config_util
+from homeassistant.components import group, persistent_notification
+import homeassistant.config as conf_util
 import homeassistant.core as core
 import homeassistant.loader as loader
-import homeassistant.util.dt as date_util
-import homeassistant.util.location as loc_util
 import homeassistant.util.package as pkg_util
-from homeassistant.const import (
-    CONF_CUSTOMIZE, CONF_LATITUDE, CONF_LONGITUDE, CONF_NAME,
-    CONF_TEMPERATURE_UNIT, CONF_TIME_ZONE, EVENT_COMPONENT_LOADED,
-    TEMP_CELCIUS, TEMP_FAHRENHEIT, __version__)
-from homeassistant.helpers import event_decorators, service
-from homeassistant.helpers.entity import Entity
+from homeassistant.const import EVENT_COMPONENT_LOADED, PLATFORM_FORMAT
+from homeassistant.exceptions import HomeAssistantError
+from homeassistant.helpers import (
+    event_decorators, service, config_per_platform, extract_domain_configs)
 
 _LOGGER = logging.getLogger(__name__)
 _SETUP_LOCK = RLock()
@@ -29,11 +30,11 @@ _CURRENT_SETUP = []
 
 ATTR_COMPONENT = 'component'
 
-PLATFORM_FORMAT = '{}.{}'
 ERROR_LOG_FILENAME = 'home-assistant.log'
 
 
-def setup_component(hass, domain, config=None):
+def setup_component(hass: core.HomeAssistant, domain: str,
+                    config: Optional[Dict]=None) -> bool:
     """Setup a component and all its dependencies."""
     if domain in hass.config.components:
         return True
@@ -56,13 +57,14 @@ def setup_component(hass, domain, config=None):
     return True
 
 
-def _handle_requirements(hass, component, name):
+def _handle_requirements(hass: core.HomeAssistant, component,
+                         name: str) -> bool:
     """Install the requirements for a component."""
     if hass.config.skip_pip or not hasattr(component, 'REQUIREMENTS'):
         return True
 
     for req in component.REQUIREMENTS:
-        if not pkg_util.install_package(req, target=hass.config.path('lib')):
+        if not pkg_util.install_package(req, target=hass.config.path('deps')):
             _LOGGER.error('Not initializing %s because could not install '
                           'dependency %s', name, req)
             return False
@@ -70,9 +72,10 @@ def _handle_requirements(hass, component, name):
     return True
 
 
-def _setup_component(hass, domain, config):
+def _setup_component(hass: core.HomeAssistant, domain: str, config) -> bool:
     """Setup a component for Home Assistant."""
-    # pylint: disable=too-many-return-statements
+    # pylint: disable=too-many-return-statements,too-many-branches
+    # pylint: disable=too-many-statements
     if domain in hass.config.components:
         return True
 
@@ -96,15 +99,69 @@ def _setup_component(hass, domain, config):
                 domain, ", ".join(missing_deps))
             return False
 
+        if hasattr(component, 'CONFIG_SCHEMA'):
+            try:
+                config = component.CONFIG_SCHEMA(config)
+            except vol.MultipleInvalid as ex:
+                _log_exception(ex, domain, config)
+                return False
+
+        elif hasattr(component, 'PLATFORM_SCHEMA'):
+            platforms = []
+            for p_name, p_config in config_per_platform(config, domain):
+                # Validate component specific platform schema
+                try:
+                    p_validated = component.PLATFORM_SCHEMA(p_config)
+                except vol.MultipleInvalid as ex:
+                    _log_exception(ex, domain, p_config)
+                    return False
+
+                # Not all platform components follow same pattern for platforms
+                # So if p_name is None we are not going to validate platform
+                # (the automation component is one of them)
+                if p_name is None:
+                    platforms.append(p_validated)
+                    continue
+
+                platform = prepare_setup_platform(hass, config, domain,
+                                                  p_name)
+
+                if platform is None:
+                    return False
+
+                # Validate platform specific schema
+                if hasattr(platform, 'PLATFORM_SCHEMA'):
+                    try:
+                        p_validated = platform.PLATFORM_SCHEMA(p_validated)
+                    except vol.MultipleInvalid as ex:
+                        _log_exception(ex, '{}.{}'.format(domain, p_name),
+                                       p_validated)
+                        return False
+
+                platforms.append(p_validated)
+
+            # Create a copy of the configuration with all config for current
+            # component removed and add validated config back in.
+            filter_keys = extract_domain_configs(config, domain)
+            config = {key: value for key, value in config.items()
+                      if key not in filter_keys}
+            config[domain] = platforms
+
         if not _handle_requirements(hass, component, domain):
             return False
 
         _CURRENT_SETUP.append(domain)
 
         try:
-            if not component.setup(hass, config):
+            result = component.setup(hass, config)
+            if result is False:
                 _LOGGER.error('component %s failed to initialize', domain)
                 return False
+            elif result is not True:
+                _LOGGER.error('component %s did not return boolean if setup '
+                              'was successful. Disabling component.', domain)
+                loader.set_component(domain, None)
+                return False
         except Exception:  # pylint: disable=broad-except
             _LOGGER.exception('Error during setup of component %s', domain)
             return False
@@ -124,13 +181,14 @@ def _setup_component(hass, domain, config):
         return True
 
 
-def prepare_setup_platform(hass, config, domain, platform_name):
+def prepare_setup_platform(hass: core.HomeAssistant, config, domain: str,
+                           platform_name: str) -> Optional[ModuleType]:
     """Load a platform and makes sure dependencies are setup."""
     _ensure_loader_prepared(hass)
 
     platform_path = PLATFORM_FORMAT.format(domain, platform_name)
 
-    platform = loader.get_component(platform_path)
+    platform = loader.get_platform(domain, platform_name)
 
     # Not found
     if platform is None:
@@ -156,15 +214,15 @@ def prepare_setup_platform(hass, config, domain, platform_name):
     return platform
 
 
-def mount_local_lib_path(config_dir):
-    """Add local library to Python Path."""
-    sys.path.insert(0, os.path.join(config_dir, 'lib'))
-
-
 # pylint: disable=too-many-branches, too-many-statements, too-many-arguments
-def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
-                     verbose=False, daemon=False, skip_pip=False,
-                     log_rotate_days=None):
+def from_config_dict(config: Dict[str, Any],
+                     hass: Optional[core.HomeAssistant]=None,
+                     config_dir: Optional[str]=None,
+                     enable_log: bool=True,
+                     verbose: bool=False,
+                     skip_pip: bool=False,
+                     log_rotate_days: Any=None) \
+                     -> Optional[core.HomeAssistant]:
     """Try to configure Home Assistant from a config dict.
 
     Dynamically loads required components and its dependencies.
@@ -176,11 +234,18 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
             hass.config.config_dir = config_dir
             mount_local_lib_path(config_dir)
 
-    process_ha_config_upgrade(hass)
-    process_ha_core_config(hass, config.get(core.DOMAIN, {}))
+    core_config = config.get(core.DOMAIN, {})
+
+    try:
+        conf_util.process_ha_core_config(hass, core_config)
+    except vol.Invalid as ex:
+        _log_exception(ex, 'homeassistant', core_config)
+        return None
+
+    conf_util.process_ha_config_upgrade(hass)
 
     if enable_log:
-        enable_logging(hass, verbose, daemon, log_rotate_days)
+        enable_logging(hass, verbose, log_rotate_days)
 
     hass.config.skip_pip = skip_pip
     if skip_pip:
@@ -202,9 +267,10 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
     if not core_components.setup(hass, config):
         _LOGGER.error('Home Assistant core failed to initialize. '
                       'Further initialization aborted.')
-
         return hass
 
+    persistent_notification.setup(hass, config)
+
     _LOGGER.info('Home Assistant core initialized')
 
     # Give event decorators access to HASS
@@ -218,8 +284,11 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
     return hass
 
 
-def from_config_file(config_path, hass=None, verbose=False, daemon=False,
-                     skip_pip=True, log_rotate_days=None):
+def from_config_file(config_path: str,
+                     hass: Optional[core.HomeAssistant]=None,
+                     verbose: bool=False,
+                     skip_pip: bool=True,
+                     log_rotate_days: Any=None):
     """Read the configuration file and try to start all the functionality.
 
     Will add functionality to 'hass' parameter if given,
@@ -233,37 +302,39 @@ def from_config_file(config_path, hass=None, verbose=False, daemon=False,
     hass.config.config_dir = config_dir
     mount_local_lib_path(config_dir)
 
-    enable_logging(hass, verbose, daemon, log_rotate_days)
+    enable_logging(hass, verbose, log_rotate_days)
 
-    config_dict = config_util.load_yaml_config_file(config_path)
+    try:
+        config_dict = conf_util.load_yaml_config_file(config_path)
+    except HomeAssistantError:
+        return None
 
     return from_config_dict(config_dict, hass, enable_log=False,
                             skip_pip=skip_pip)
 
 
-def enable_logging(hass, verbose=False, daemon=False, log_rotate_days=None):
+def enable_logging(hass: core.HomeAssistant, verbose: bool=False,
+                   log_rotate_days=None) -> None:
     """Setup the logging."""
-    if not daemon:
-        logging.basicConfig(level=logging.INFO)
-        fmt = ("%(log_color)s%(asctime)s %(levelname)s (%(threadName)s) "
-               "[%(name)s] %(message)s%(reset)s")
-        try:
-            from colorlog import ColoredFormatter
-            logging.getLogger().handlers[0].setFormatter(ColoredFormatter(
-                fmt,
-                datefmt='%y-%m-%d %H:%M:%S',
-                reset=True,
-                log_colors={
-                    'DEBUG': 'cyan',
-                    'INFO': 'green',
-                    'WARNING': 'yellow',
-                    'ERROR': 'red',
-                    'CRITICAL': 'red',
-                }
-            ))
-        except ImportError:
-            _LOGGER.warning(
-                "Colorlog package not found, console coloring disabled")
+    logging.basicConfig(level=logging.INFO)
+    fmt = ("%(log_color)s%(asctime)s %(levelname)s (%(threadName)s) "
+           "[%(name)s] %(message)s%(reset)s")
+    try:
+        from colorlog import ColoredFormatter
+        logging.getLogger().handlers[0].setFormatter(ColoredFormatter(
+            fmt,
+            datefmt='%y-%m-%d %H:%M:%S',
+            reset=True,
+            log_colors={
+                'DEBUG': 'cyan',
+                'INFO': 'green',
+                'WARNING': 'yellow',
+                'ERROR': 'red',
+                'CRITICAL': 'red',
+            }
+        ))
+    except ImportError:
+        pass
 
     # Log errors to a file if we have write access to file or config dir
     err_log_path = hass.config.path(ERROR_LOG_FILENAME)
@@ -294,107 +365,32 @@ def enable_logging(hass, verbose=False, daemon=False, log_rotate_days=None):
             'Unable to setup error log %s (access denied)', err_log_path)
 
 
-def process_ha_config_upgrade(hass):
-    """Upgrade config if necessary."""
-    version_path = hass.config.path('.HA_VERSION')
-
-    try:
-        with open(version_path, 'rt') as inp:
-            conf_version = inp.readline().strip()
-    except FileNotFoundError:
-        # Last version to not have this file
-        conf_version = '0.7.7'
-
-    if conf_version == __version__:
-        return
-
-    _LOGGER.info('Upgrading config directory from %s to %s', conf_version,
-                 __version__)
-
-    lib_path = hass.config.path('lib')
-    if os.path.isdir(lib_path):
-        shutil.rmtree(lib_path)
-
-    with open(version_path, 'wt') as outp:
-        outp.write(__version__)
-
-
-def process_ha_core_config(hass, config):
-    """Process the [homeassistant] section from the config."""
-    hac = hass.config
-
-    def set_time_zone(time_zone_str):
-        """Helper method to set time zone."""
-        if time_zone_str is None:
-            return
-
-        time_zone = date_util.get_time_zone(time_zone_str)
-
-        if time_zone:
-            hac.time_zone = time_zone
-            date_util.set_default_time_zone(time_zone)
-        else:
-            _LOGGER.error('Received invalid time zone %s', time_zone_str)
-
-    for key, attr, typ in ((CONF_LATITUDE, 'latitude', float),
-                           (CONF_LONGITUDE, 'longitude', float),
-                           (CONF_NAME, 'location_name', str)):
-        if key in config:
-            try:
-                setattr(hac, attr, typ(config[key]))
-            except ValueError:
-                _LOGGER.error('Received invalid %s value for %s: %s',
-                              typ.__name__, key, attr)
-
-    set_time_zone(config.get(CONF_TIME_ZONE))
-
-    customize = config.get(CONF_CUSTOMIZE)
-
-    if isinstance(customize, dict):
-        for entity_id, attrs in config.get(CONF_CUSTOMIZE, {}).items():
-            if not isinstance(attrs, dict):
-                continue
-            Entity.overwrite_attribute(entity_id, attrs.keys(), attrs.values())
-
-    if CONF_TEMPERATURE_UNIT in config:
-        unit = config[CONF_TEMPERATURE_UNIT]
-
-        if unit == 'C':
-            hac.temperature_unit = TEMP_CELCIUS
-        elif unit == 'F':
-            hac.temperature_unit = TEMP_FAHRENHEIT
-
-    # If we miss some of the needed values, auto detect them
-    if None not in (
-            hac.latitude, hac.longitude, hac.temperature_unit, hac.time_zone):
-        return
-
-    _LOGGER.info('Auto detecting location and temperature unit')
-
-    info = loc_util.detect_location_info()
-
-    if info is None:
-        _LOGGER.error('Could not detect location information')
-        return
-
-    if hac.latitude is None and hac.longitude is None:
-        hac.latitude = info.latitude
-        hac.longitude = info.longitude
-
-    if hac.temperature_unit is None:
-        if info.use_fahrenheit:
-            hac.temperature_unit = TEMP_FAHRENHEIT
-        else:
-            hac.temperature_unit = TEMP_CELCIUS
-
-    if hac.location_name is None:
-        hac.location_name = info.city
-
-    if hac.time_zone is None:
-        set_time_zone(info.time_zone)
-
-
-def _ensure_loader_prepared(hass):
+def _ensure_loader_prepared(hass: core.HomeAssistant) -> None:
     """Ensure Home Assistant loader is prepared."""
     if not loader.PREPARED:
         loader.prepare(hass)
+
+
+def _log_exception(ex, domain, config):
+    """Generate log exception for config validation."""
+    message = 'Invalid config for [{}]: '.format(domain)
+    if 'extra keys not allowed' in ex.error_message:
+        message += '[{}] is an invalid option for [{}]. Check: {}->{}.'\
+                   .format(ex.path[-1], domain, domain,
+                           '->'.join('%s' % m for m in ex.path))
+    else:
+        message += humanize_error(config, ex)
+
+    if hasattr(config, '__line__'):
+        message += " (See {}:{})".format(config.__config_file__,
+                                         config.__line__ or '?')
+
+    _LOGGER.error(message)
+
+
+def mount_local_lib_path(config_dir: str) -> str:
+    """Add local library to Python Path."""
+    deps_dir = os.path.join(config_dir, 'deps')
+    if deps_dir not in sys.path:
+        sys.path.insert(0, os.path.join(config_dir, 'deps'))
+    return deps_dir

homeassistant/components/__init__.py

@@ -11,7 +11,6 @@ import itertools as it
 import logging
 
 import homeassistant.core as ha
-from homeassistant.helpers.entity import split_entity_id
 from homeassistant.helpers.service import extract_entity_ids
 from homeassistant.loader import get_component
 from homeassistant.const import (
@@ -19,6 +18,8 @@ from homeassistant.const import (
 
 _LOGGER = logging.getLogger(__name__)
 
+SERVICE_RELOAD_CORE_CONFIG = 'reload_core_config'
+
 
 def is_on(hass, entity_id=None):
     """Load up the module to call the is_on method.
@@ -33,7 +34,7 @@ def is_on(hass, entity_id=None):
         entity_ids = hass.states.entity_ids()
 
     for entity_id in entity_ids:
-        domain = split_entity_id(entity_id)[0]
+        domain = ha.split_entity_id(entity_id)[0]
 
         module = get_component(domain)
 
@@ -73,6 +74,11 @@ def toggle(hass, entity_id=None, **service_data):
     hass.services.call(ha.DOMAIN, SERVICE_TOGGLE, service_data)
 
 
+def reload_core_config(hass):
+    """Reload the core config."""
+    hass.services.call(ha.DOMAIN, SERVICE_RELOAD_CORE_CONFIG)
+
+
 def setup(hass, config):
     """Setup general services related to Home Assistant."""
     def handle_turn_service(service):
@@ -88,7 +94,7 @@ def setup(hass, config):
 
         # Group entity_ids by domain. groupby requires sorted data.
         by_domain = it.groupby(sorted(entity_ids),
-                               lambda item: split_entity_id(item)[0])
+                               lambda item: ha.split_entity_id(item)[0])
 
         for domain, ent_ids in by_domain:
             # We want to block for all calls and only return when all calls
@@ -111,4 +117,21 @@ def setup(hass, config):
     hass.services.register(ha.DOMAIN, SERVICE_TURN_ON, handle_turn_service)
     hass.services.register(ha.DOMAIN, SERVICE_TOGGLE, handle_turn_service)
 
+    def handle_reload_config(call):
+        """Service handler for reloading core config."""
+        from homeassistant.exceptions import HomeAssistantError
+        from homeassistant import config as conf_util
+
+        try:
+            path = conf_util.find_config_file(hass.config.config_dir)
+            conf = conf_util.load_yaml_config_file(path)
+        except HomeAssistantError as err:
+            _LOGGER.error(err)
+            return
+
+        conf_util.process_ha_core_config(hass, conf.get(ha.DOMAIN) or {})
+
+    hass.services.register(ha.DOMAIN, SERVICE_RELOAD_CORE_CONFIG,
+                           handle_reload_config)
+
     return True

homeassistant/components/alarm_control_panel/__init__.py

@@ -7,24 +7,23 @@ https://home-assistant.io/components/alarm_control_panel/
 import logging
 import os
 
-from homeassistant.components import verisure
+import voluptuous as vol
+
 from homeassistant.const import (
     ATTR_CODE, ATTR_CODE_FORMAT, ATTR_ENTITY_ID, SERVICE_ALARM_TRIGGER,
     SERVICE_ALARM_DISARM, SERVICE_ALARM_ARM_HOME, SERVICE_ALARM_ARM_AWAY)
 from homeassistant.config import load_yaml_config_file
+from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
+import homeassistant.helpers.config_validation as cv
 from homeassistant.helpers.entity import Entity
 from homeassistant.helpers.entity_component import EntityComponent
 
 DOMAIN = 'alarm_control_panel'
 SCAN_INTERVAL = 30
+ATTR_CHANGED_BY = 'changed_by'
 
 ENTITY_ID_FORMAT = DOMAIN + '.{}'
 
-# Maps discovered services to their platforms
-DISCOVERY_PLATFORMS = {
-    verisure.DISCOVER_ALARMS: 'verisure'
-}
-
 SERVICE_TO_METHOD = {
     SERVICE_ALARM_DISARM: 'alarm_disarm',
     SERVICE_ALARM_ARM_HOME: 'alarm_arm_home',
@@ -37,12 +36,16 @@ ATTR_TO_PROPERTY = [
     ATTR_CODE_FORMAT
 ]
 
+ALARM_SERVICE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Optional(ATTR_CODE): cv.string,
+})
+
 
 def setup(hass, config):
     """Track states and offer events for sensors."""
     component = EntityComponent(
-        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL,
-        DISCOVERY_PLATFORMS)
+        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL)
 
     component.setup(config)
 
@@ -50,10 +53,7 @@ def setup(hass, config):
         """Map services to methods on Alarm."""
         target_alarms = component.extract_from_service(service)
 
-        if ATTR_CODE not in service.data:
-            code = None
-        else:
-            code = service.data[ATTR_CODE]
+        code = service.data.get(ATTR_CODE)
 
         method = SERVICE_TO_METHOD[service.service]
 
@@ -67,8 +67,8 @@ def setup(hass, config):
 
     for service in SERVICE_TO_METHOD:
         hass.services.register(DOMAIN, service, alarm_service_handler,
-                               descriptions.get(service))
-
+                               descriptions.get(service),
+                               schema=ALARM_SERVICE_SCHEMA)
     return True
 
 
@@ -125,6 +125,11 @@ class AlarmControlPanel(Entity):
         """Regex for code format or None if no code is required."""
         return None
 
+    @property
+    def changed_by(self):
+        """Last change triggered by."""
+        return None
+
     def alarm_disarm(self, code=None):
         """Send disarm command."""
         raise NotImplementedError()
@@ -146,5 +151,6 @@ class AlarmControlPanel(Entity):
         """Return the state attributes."""
         state_attr = {
             ATTR_CODE_FORMAT: self.code_format,
+            ATTR_CHANGED_BY: self.changed_by
         }
         return state_attr

homeassistant/components/alarm_control_panel/envisalink.py

@@ -0,0 +1,105 @@
+"""
+Support for Envisalink-based alarm control panels (Honeywell/DSC).
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/alarm_control_panel.envisalink/
+"""
+import logging
+import homeassistant.components.alarm_control_panel as alarm
+from homeassistant.components.envisalink import (EVL_CONTROLLER,
+                                                 EnvisalinkDevice,
+                                                 PARTITION_SCHEMA,
+                                                 CONF_CODE,
+                                                 CONF_PARTITIONNAME,
+                                                 SIGNAL_PARTITION_UPDATE,
+                                                 SIGNAL_KEYPAD_UPDATE)
+from homeassistant.const import (
+    STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
+    STATE_UNKNOWN, STATE_ALARM_TRIGGERED)
+
+DEPENDENCIES = ['envisalink']
+_LOGGER = logging.getLogger(__name__)
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """Perform the setup for Envisalink alarm panels."""
+    _configured_partitions = discovery_info['partitions']
+    _code = discovery_info[CONF_CODE]
+    for part_num in _configured_partitions:
+        _device_config_data = PARTITION_SCHEMA(
+            _configured_partitions[part_num])
+        _device = EnvisalinkAlarm(
+            part_num,
+            _device_config_data[CONF_PARTITIONNAME],
+            _code,
+            EVL_CONTROLLER.alarm_state['partition'][part_num],
+            EVL_CONTROLLER)
+        add_devices_callback([_device])
+
+    return True
+
+
+class EnvisalinkAlarm(EnvisalinkDevice, alarm.AlarmControlPanel):
+    """Represents the Envisalink-based alarm panel."""
+
+    # pylint: disable=too-many-arguments
+    def __init__(self, partition_number, alarm_name, code, info, controller):
+        """Initialize the alarm panel."""
+        from pydispatch import dispatcher
+        self._partition_number = partition_number
+        self._code = code
+        _LOGGER.debug('Setting up alarm: ' + alarm_name)
+        EnvisalinkDevice.__init__(self, alarm_name, info, controller)
+        dispatcher.connect(self._update_callback,
+                           signal=SIGNAL_PARTITION_UPDATE,
+                           sender=dispatcher.Any)
+        dispatcher.connect(self._update_callback,
+                           signal=SIGNAL_KEYPAD_UPDATE,
+                           sender=dispatcher.Any)
+
+    def _update_callback(self, partition):
+        """Update HA state, if needed."""
+        if partition is None or int(partition) == self._partition_number:
+            self.update_ha_state()
+
+    @property
+    def code_format(self):
+        """The characters if code is defined."""
+        return self._code
+
+    @property
+    def state(self):
+        """Return the state of the device."""
+        if self._info['status']['alarm']:
+            return STATE_ALARM_TRIGGERED
+        elif self._info['status']['armed_away']:
+            return STATE_ALARM_ARMED_AWAY
+        elif self._info['status']['armed_stay']:
+            return STATE_ALARM_ARMED_HOME
+        elif self._info['status']['alpha']:
+            return STATE_ALARM_DISARMED
+        else:
+            return STATE_UNKNOWN
+
+    def alarm_disarm(self, code=None):
+        """Send disarm command."""
+        if self._code:
+            EVL_CONTROLLER.disarm_partition(str(code),
+                                            self._partition_number)
+
+    def alarm_arm_home(self, code=None):
+        """Send arm home command."""
+        if self._code:
+            EVL_CONTROLLER.arm_stay_partition(str(code),
+                                              self._partition_number)
+
+    def alarm_arm_away(self, code=None):
+        """Send arm away command."""
+        if self._code:
+            EVL_CONTROLLER.arm_away_partition(str(code),
+                                              self._partition_number)
+
+    def alarm_trigger(self, code=None):
+        """Alarm trigger command. Not possible for us."""
+        raise NotImplementedError()

homeassistant/components/alarm_control_panel/mqtt.py

@@ -6,43 +6,55 @@ https://home-assistant.io/components/alarm_control_panel.mqtt/
 """
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.alarm_control_panel as alarm
 import homeassistant.components.mqtt as mqtt
 from homeassistant.const import (
     STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
-    STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED, STATE_UNKNOWN)
+    STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED, STATE_UNKNOWN,
+    CONF_NAME)
+from homeassistant.components.mqtt import (
+    CONF_STATE_TOPIC, CONF_COMMAND_TOPIC, CONF_QOS)
+import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
-DEFAULT_NAME = "MQTT Alarm"
-DEFAULT_QOS = 0
-DEFAULT_PAYLOAD_DISARM = "DISARM"
-DEFAULT_PAYLOAD_ARM_HOME = "ARM_HOME"
-DEFAULT_PAYLOAD_ARM_AWAY = "ARM_AWAY"
-
 DEPENDENCIES = ['mqtt']
 
+CONF_PAYLOAD_DISARM = 'payload_disarm'
+CONF_PAYLOAD_ARM_HOME = 'payload_arm_home'
+CONF_PAYLOAD_ARM_AWAY = 'payload_arm_away'
+CONF_CODE = 'code'
+
+DEFAULT_NAME = "MQTT Alarm"
+DEFAULT_DISARM = "DISARM"
+DEFAULT_ARM_HOME = "ARM_HOME"
+DEFAULT_ARM_AWAY = "ARM_AWAY"
+
+PLATFORM_SCHEMA = mqtt.MQTT_BASE_PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Required(CONF_STATE_TOPIC): mqtt.valid_subscribe_topic,
+    vol.Required(CONF_COMMAND_TOPIC): mqtt.valid_publish_topic,
+    vol.Optional(CONF_PAYLOAD_DISARM, default=DEFAULT_DISARM): cv.string,
+    vol.Optional(CONF_PAYLOAD_ARM_HOME, default=DEFAULT_ARM_HOME): cv.string,
+    vol.Optional(CONF_PAYLOAD_ARM_AWAY, default=DEFAULT_ARM_AWAY): cv.string,
+    vol.Optional(CONF_CODE): cv.string,
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup the MQTT platform."""
-    if config.get('state_topic') is None:
-        _LOGGER.error("Missing required variable: state_topic")
-        return False
-
-    if config.get('command_topic') is None:
-        _LOGGER.error("Missing required variable: command_topic")
-        return False
-
     add_devices([MqttAlarm(
         hass,
-        config.get('name', DEFAULT_NAME),
-        config.get('state_topic'),
-        config.get('command_topic'),
-        config.get('qos', DEFAULT_QOS),
-        config.get('payload_disarm', DEFAULT_PAYLOAD_DISARM),
-        config.get('payload_arm_home', DEFAULT_PAYLOAD_ARM_HOME),
-        config.get('payload_arm_away', DEFAULT_PAYLOAD_ARM_AWAY),
-        config.get('code'))])
+        config[CONF_NAME],
+        config[CONF_STATE_TOPIC],
+        config[CONF_COMMAND_TOPIC],
+        config[CONF_QOS],
+        config[CONF_PAYLOAD_DISARM],
+        config[CONF_PAYLOAD_ARM_HOME],
+        config[CONF_PAYLOAD_ARM_AWAY],
+        config.get(CONF_CODE))])
 
 
 # pylint: disable=too-many-arguments, too-many-instance-attributes
@@ -62,7 +74,7 @@ class MqttAlarm(alarm.AlarmControlPanel):
         self._payload_disarm = payload_disarm
         self._payload_arm_home = payload_arm_home
         self._payload_arm_away = payload_arm_away
-        self._code = str(code) if code else None
+        self._code = code
 
         def message_received(topic, payload, qos):
             """A new MQTT message has been received."""

homeassistant/components/alarm_control_panel/services.yaml

@@ -0,0 +1,43 @@
+alarm_disarm:
+  description: Send the alarm the command for disarm
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to disarm
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to disarm the alarm control panel with
+      example: 1234
+
+alarm_arm_home:
+  description: Send the alarm the command for arm home
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to arm home
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to arm home the alarm control panel with
+      example: 1234
+
+alarm_arm_away:
+  description: Send the alarm the command for arm away
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to arm away
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to arm away the alarm control panel with
+      example: 1234
+
+alarm_trigger:
+  description: Send the alarm the command for trigger
+
+  fields:
+    entity_id:
+      description: Name of alarm control panel to trigger
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: An optional code to trigger the alarm control panel with
+      example: 1234

homeassistant/components/alarm_control_panel/simplisafe.py

@@ -0,0 +1,124 @@
+"""
+Interfaces with SimpliSafe alarm control panel.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/alarm_control_panel.simplisafe/
+"""
+import logging
+
+import homeassistant.components.alarm_control_panel as alarm
+
+from homeassistant.const import (
+    CONF_PASSWORD, CONF_USERNAME, STATE_UNKNOWN,
+    STATE_ALARM_DISARMED, STATE_ALARM_ARMED_HOME, STATE_ALARM_ARMED_AWAY)
+
+_LOGGER = logging.getLogger(__name__)
+REQUIREMENTS = ['https://github.com/w1ll1am23/simplisafe-python/archive/'
+                '586fede0e85fd69e56e516aaa8e97eb644ca8866.zip#'
+                'simplisafe-python==0.0.1']
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Set up the SimpliSafe platform."""
+    username = config.get(CONF_USERNAME)
+    password = config.get(CONF_PASSWORD)
+
+    if username is None or password is None:
+        _LOGGER.error('Must specify username and password!')
+        return False
+
+    add_devices([SimpliSafeAlarm(
+        config.get('name', "SimpliSafe"),
+        username,
+        password,
+        config.get('code'))])
+
+
+# pylint: disable=abstract-method
+class SimpliSafeAlarm(alarm.AlarmControlPanel):
+    """Representation a SimpliSafe alarm."""
+
+    def __init__(self, name, username, password, code):
+        """Initialize the SimpliSafe alarm."""
+        from simplisafe import SimpliSafe
+        self.simplisafe = SimpliSafe(username, password)
+        self._name = name
+        self._code = str(code) if code else None
+        self._id = self.simplisafe.get_id()
+        status = self.simplisafe.get_state()
+        if status == 'Off':
+            self._state = STATE_ALARM_DISARMED
+        elif status == 'Home':
+            self._state = STATE_ALARM_ARMED_HOME
+        elif status == 'Away':
+            self._state = STATE_ALARM_ARMED_AWAY
+        else:
+            self._state = STATE_UNKNOWN
+
+    @property
+    def should_poll(self):
+        """Poll the SimpliSafe API."""
+        return True
+
+    @property
+    def name(self):
+        """Return the name of the device."""
+        if self._name is not None:
+            return self._name
+        else:
+            return 'Alarm {}'.format(self._id)
+
+    @property
+    def code_format(self):
+        """One or more characters if code is defined."""
+        return None if self._code is None else '.+'
+
+    @property
+    def state(self):
+        """Return the state of the device."""
+        return self._state
+
+    def update(self):
+        """Update alarm status."""
+        self.simplisafe.get_location()
+        status = self.simplisafe.get_state()
+
+        if status == 'Off':
+            self._state = STATE_ALARM_DISARMED
+        elif status == 'Home':
+            self._state = STATE_ALARM_ARMED_HOME
+        elif status == 'Away':
+            self._state = STATE_ALARM_ARMED_AWAY
+        else:
+            self._state = STATE_UNKNOWN
+
+    def alarm_disarm(self, code=None):
+        """Send disarm command."""
+        if not self._validate_code(code, 'disarming'):
+            return
+        self.simplisafe.set_state('off')
+        _LOGGER.info('SimpliSafe alarm disarming')
+        self.update()
+
+    def alarm_arm_home(self, code=None):
+        """Send arm home command."""
+        if not self._validate_code(code, 'arming home'):
+            return
+        self.simplisafe.set_state('home')
+        _LOGGER.info('SimpliSafe alarm arming home')
+        self.update()
+
+    def alarm_arm_away(self, code=None):
+        """Send arm away command."""
+        if not self._validate_code(code, 'arming away'):
+            return
+        self.simplisafe.set_state('away')
+        _LOGGER.info('SimpliSafe alarm arming away')
+        self.update()
+
+    def _validate_code(self, code, state):
+        """Validate given code."""
+        check = self._code is None or code == self._code
+        if not check:
+            _LOGGER.warning('Wrong code entered for %s', state)
+        return check

homeassistant/components/alarm_control_panel/verisure.py

@@ -37,6 +37,7 @@ class VerisureAlarm(alarm.AlarmControlPanel):
         self._id = device_id
         self._state = STATE_UNKNOWN
         self._digits = int(hub.config.get('code_digits', '4'))
+        self._changed_by = None
 
     @property
     def name(self):
@@ -48,11 +49,21 @@ class VerisureAlarm(alarm.AlarmControlPanel):
         """Return the state of the device."""
         return self._state
 
+    @property
+    def available(self):
+        """Return True if entity is available."""
+        return hub.available
+
     @property
     def code_format(self):
         """The code format as regex."""
         return '^\\d{%s}$' % self._digits
 
+    @property
+    def changed_by(self):
+        """Last change triggered by."""
+        return self._changed_by
+
     def update(self):
         """Update alarm status."""
         hub.update_alarms()
@@ -67,6 +78,7 @@ class VerisureAlarm(alarm.AlarmControlPanel):
             _LOGGER.error(
                 'Unknown alarm state %s',
                 hub.alarm_status[self._id].status)
+        self._changed_by = hub.alarm_status[self._id].name
 
     def alarm_disarm(self, code=None):
         """Send disarm command."""

homeassistant/components/alexa.py

@@ -7,15 +7,14 @@ https://home-assistant.io/components/alexa/
 import enum
 import logging
 
-from homeassistant.const import HTTP_OK, HTTP_UNPROCESSABLE_ENTITY
-from homeassistant.helpers.service import call_from_config
-from homeassistant.helpers import template
+from homeassistant.const import HTTP_BAD_REQUEST
+from homeassistant.helpers import template, script
+from homeassistant.components.http import HomeAssistantView
 
 DOMAIN = 'alexa'
 DEPENDENCIES = ['http']
 
 _LOGGER = logging.getLogger(__name__)
-_CONFIG = {}
 
 API_ENDPOINT = '/api/alexa'
 
@@ -27,73 +26,88 @@ CONF_ACTION = 'action'
 
 def setup(hass, config):
     """Activate Alexa component."""
-    _CONFIG.update(config[DOMAIN].get(CONF_INTENTS, {}))
-
-    hass.http.register_path('POST', API_ENDPOINT, _handle_alexa, True)
+    hass.wsgi.register_view(AlexaView(hass,
+                                      config[DOMAIN].get(CONF_INTENTS, {})))
 
     return True
 
 
-def _handle_alexa(handler, path_match, data):
-    """Handle Alexa."""
-    _LOGGER.debug('Received Alexa request: %s', data)
+class AlexaView(HomeAssistantView):
+    """Handle Alexa requests."""
 
-    req = data.get('request')
+    url = API_ENDPOINT
+    name = 'api:alexa'
 
-    if req is None:
-        _LOGGER.error('Received invalid data from Alexa: %s', data)
-        handler.write_json_message(
-            "Invalid value received for port", HTTP_UNPROCESSABLE_ENTITY)
-        return
+    def __init__(self, hass, intents):
+        """Initialize Alexa view."""
+        super().__init__(hass)
 
-    req_type = req['type']
+        for name, intent in intents.items():
+            if CONF_ACTION in intent:
+                intent[CONF_ACTION] = script.Script(
+                    hass, intent[CONF_ACTION], "Alexa intent {}".format(name))
 
-    if req_type == 'SessionEndedRequest':
-        handler.send_response(HTTP_OK)
-        handler.end_headers()
-        return
+        self.intents = intents
 
-    intent = req.get('intent')
-    response = AlexaResponse(handler.server.hass, intent)
+    def post(self, request):
+        """Handle Alexa."""
+        data = request.json
 
-    if req_type == 'LaunchRequest':
-        response.add_speech(
-            SpeechType.plaintext,
-            "Hello, and welcome to the future. How may I help?")
-        handler.write_json(response.as_dict())
-        return
+        _LOGGER.debug('Received Alexa request: %s', data)
 
-    if req_type != 'IntentRequest':
-        _LOGGER.warning('Received unsupported request: %s', req_type)
-        return
+        req = data.get('request')
 
-    intent_name = intent['name']
-    config = _CONFIG.get(intent_name)
+        if req is None:
+            _LOGGER.error('Received invalid data from Alexa: %s', data)
+            return self.json_message('Expected request value not received',
+                                     HTTP_BAD_REQUEST)
 
-    if config is None:
-        _LOGGER.warning('Received unknown intent %s', intent_name)
-        response.add_speech(
-            SpeechType.plaintext,
-            "This intent is not yet configured within Home Assistant.")
-        handler.write_json(response.as_dict())
-        return
+        req_type = req['type']
 
-    speech = config.get(CONF_SPEECH)
-    card = config.get(CONF_CARD)
-    action = config.get(CONF_ACTION)
+        if req_type == 'SessionEndedRequest':
+            return None
 
-    # pylint: disable=unsubscriptable-object
-    if speech is not None:
-        response.add_speech(SpeechType[speech['type']], speech['text'])
+        intent = req.get('intent')
+        response = AlexaResponse(self.hass, intent)
 
-    if card is not None:
-        response.add_card(CardType[card['type']], card['title'],
-                          card['content'])
+        if req_type == 'LaunchRequest':
+            response.add_speech(
+                SpeechType.plaintext,
+                "Hello, and welcome to the future. How may I help?")
+            return self.json(response)
 
-    if action is not None:
-        call_from_config(handler.server.hass, action, True)
+        if req_type != 'IntentRequest':
+            _LOGGER.warning('Received unsupported request: %s', req_type)
+            return self.json_message(
+                'Received unsupported request: {}'.format(req_type),
+                HTTP_BAD_REQUEST)
 
-    handler.write_json(response.as_dict())
+        intent_name = intent['name']
+        config = self.intents.get(intent_name)
+
+        if config is None:
+            _LOGGER.warning('Received unknown intent %s', intent_name)
+            response.add_speech(
+                SpeechType.plaintext,
+                "This intent is not yet configured within Home Assistant.")
+            return self.json(response)
+
+        speech = config.get(CONF_SPEECH)
+        card = config.get(CONF_CARD)
+        action = config.get(CONF_ACTION)
+
+        if action is not None:
+            action.run(response.variables)
+
+        # pylint: disable=unsubscriptable-object
+        if speech is not None:
+            response.add_speech(SpeechType[speech['type']], speech['text'])
+
+        if card is not None:
+            response.add_card(CardType[card['type']], card['title'],
+                              card['content'])
+
+        return self.json(response)
 
 
 class SpeechType(enum.Enum):

homeassistant/components/api.py

@@ -6,22 +6,23 @@ https://home-assistant.io/developers/api/
 """
 import json
 import logging
-import re
-import threading
+import queue
 
 import homeassistant.core as ha
 import homeassistant.remote as rem
 from homeassistant.bootstrap import ERROR_LOG_FILENAME
 from homeassistant.const import (
-    CONTENT_TYPE_TEXT_PLAIN, EVENT_HOMEASSISTANT_STOP, EVENT_TIME_CHANGED,
-    HTTP_BAD_REQUEST, HTTP_CREATED, HTTP_HEADER_CONTENT_TYPE, HTTP_NOT_FOUND,
-    HTTP_OK, HTTP_UNPROCESSABLE_ENTITY, MATCH_ALL, URL_API, URL_API_COMPONENTS,
-    URL_API_CONFIG, URL_API_ERROR_LOG, URL_API_EVENT_FORWARD, URL_API_EVENTS,
-    URL_API_LOG_OUT, URL_API_SERVICES, URL_API_STATES, URL_API_STATES_ENTITY,
-    URL_API_STREAM, URL_API_TEMPLATE)
+    EVENT_HOMEASSISTANT_STOP, EVENT_TIME_CHANGED,
+    HTTP_BAD_REQUEST, HTTP_CREATED, HTTP_NOT_FOUND,
+    HTTP_UNPROCESSABLE_ENTITY, MATCH_ALL, URL_API, URL_API_COMPONENTS,
+    URL_API_CONFIG, URL_API_DISCOVERY_INFO, URL_API_ERROR_LOG,
+    URL_API_EVENT_FORWARD, URL_API_EVENTS, URL_API_SERVICES,
+    URL_API_STATES, URL_API_STATES_ENTITY, URL_API_STREAM, URL_API_TEMPLATE,
+    __version__)
 from homeassistant.exceptions import TemplateError
 from homeassistant.helpers.state import TrackStates
 from homeassistant.helpers import template
+from homeassistant.components.http import HomeAssistantView
 
 DOMAIN = 'api'
 DEPENDENCIES = ['http']
@@ -34,356 +35,351 @@ _LOGGER = logging.getLogger(__name__)
 
 def setup(hass, config):
     """Register the API with the HTTP interface."""
-    # /api - for validation purposes
-    hass.http.register_path('GET', URL_API, _handle_get_api)
-
-    # /api/stream
-    hass.http.register_path('GET', URL_API_STREAM, _handle_get_api_stream)
-
-    # /api/config
-    hass.http.register_path('GET', URL_API_CONFIG, _handle_get_api_config)
-
-    # /states
-    hass.http.register_path('GET', URL_API_STATES, _handle_get_api_states)
-    hass.http.register_path(
-        'GET', re.compile(r'/api/states/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _handle_get_api_states_entity)
-    hass.http.register_path(
-        'POST', re.compile(r'/api/states/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _handle_post_state_entity)
-    hass.http.register_path(
-        'PUT', re.compile(r'/api/states/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _handle_post_state_entity)
-    hass.http.register_path(
-        'DELETE', re.compile(r'/api/states/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _handle_delete_state_entity)
-
-    # /events
-    hass.http.register_path('GET', URL_API_EVENTS, _handle_get_api_events)
-    hass.http.register_path(
-        'POST', re.compile(r'/api/events/(?P<event_type>[a-zA-Z\._0-9]+)'),
-        _handle_api_post_events_event)
-
-    # /services
-    hass.http.register_path('GET', URL_API_SERVICES, _handle_get_api_services)
-    hass.http.register_path(
-        'POST',
-        re.compile((r'/api/services/'
-                    r'(?P<domain>[a-zA-Z\._0-9]+)/'
-                    r'(?P<service>[a-zA-Z\._0-9]+)')),
-        _handle_post_api_services_domain_service)
-
-    # /event_forwarding
-    hass.http.register_path(
-        'POST', URL_API_EVENT_FORWARD, _handle_post_api_event_forward)
-    hass.http.register_path(
-        'DELETE', URL_API_EVENT_FORWARD, _handle_delete_api_event_forward)
-
-    # /components
-    hass.http.register_path(
-        'GET', URL_API_COMPONENTS, _handle_get_api_components)
-
-    # /error_log
-    hass.http.register_path('GET', URL_API_ERROR_LOG,
-                            _handle_get_api_error_log)
-
-    hass.http.register_path('POST', URL_API_LOG_OUT, _handle_post_api_log_out)
-
-    # /template
-    hass.http.register_path('POST', URL_API_TEMPLATE,
-                            _handle_post_api_template)
+    hass.wsgi.register_view(APIStatusView)
+    hass.wsgi.register_view(APIEventStream)
+    hass.wsgi.register_view(APIConfigView)
+    hass.wsgi.register_view(APIDiscoveryView)
+    hass.wsgi.register_view(APIStatesView)
+    hass.wsgi.register_view(APIEntityStateView)
+    hass.wsgi.register_view(APIEventListenersView)
+    hass.wsgi.register_view(APIEventView)
+    hass.wsgi.register_view(APIServicesView)
+    hass.wsgi.register_view(APIDomainServicesView)
+    hass.wsgi.register_view(APIEventForwardingView)
+    hass.wsgi.register_view(APIComponentsView)
+    hass.wsgi.register_view(APIErrorLogView)
+    hass.wsgi.register_view(APITemplateView)
 
     return True
 
 
-def _handle_get_api(handler, path_match, data):
-    """Render the debug interface."""
-    handler.write_json_message("API running.")
+class APIStatusView(HomeAssistantView):
+    """View to handle Status requests."""
 
+    url = URL_API
+    name = "api:status"
 
-def _handle_get_api_stream(handler, path_match, data):
-    """Provide a streaming interface for the event bus."""
-    gracefully_closed = False
-    hass = handler.server.hass
-    wfile = handler.wfile
-    write_lock = threading.Lock()
-    block = threading.Event()
-    session_id = None
+    def get(self, request):
+        """Retrieve if API is running."""
+        return self.json_message('API running.')
 
-    restrict = data.get('restrict')
-    if restrict:
-        restrict = restrict.split(',')
 
-    def write_message(payload):
-        """Write a message to the output."""
-        with write_lock:
-            msg = "data: {}\n\n".format(payload)
+class APIEventStream(HomeAssistantView):
+    """View to handle EventStream requests."""
 
-            try:
-                wfile.write(msg.encode("UTF-8"))
-                wfile.flush()
-            except (IOError, ValueError):
-                # IOError: socket errors
-                # ValueError: raised when 'I/O operation on closed file'
-                block.set()
+    url = URL_API_STREAM
+    name = "api:stream"
 
-    def forward_events(event):
-        """Forward events to the open request."""
-        nonlocal gracefully_closed
+    def get(self, request):
+        """Provide a streaming interface for the event bus."""
+        stop_obj = object()
+        to_write = queue.Queue()
 
-        if block.is_set() or event.event_type == EVENT_TIME_CHANGED:
-            return
-        elif event.event_type == EVENT_HOMEASSISTANT_STOP:
-            gracefully_closed = True
-            block.set()
-            return
+        restrict = request.args.get('restrict')
+        if restrict:
+            restrict = restrict.split(',') + [EVENT_HOMEASSISTANT_STOP]
 
-        handler.server.sessions.extend_validation(session_id)
-        write_message(json.dumps(event, cls=rem.JSONEncoder))
+        def forward_events(event):
+            """Forward events to the open request."""
+            if event.event_type == EVENT_TIME_CHANGED:
+                return
 
-    handler.send_response(HTTP_OK)
-    handler.send_header('Content-type', 'text/event-stream')
-    session_id = handler.set_session_cookie_header()
-    handler.end_headers()
+            if restrict and event.event_type not in restrict:
+                return
 
-    if restrict:
-        for event in restrict:
-            hass.bus.listen(event, forward_events)
-    else:
-        hass.bus.listen(MATCH_ALL, forward_events)
+            _LOGGER.debug('STREAM %s FORWARDING %s', id(stop_obj), event)
 
-    while True:
-        write_message(STREAM_PING_PAYLOAD)
+            if event.event_type == EVENT_HOMEASSISTANT_STOP:
+                data = stop_obj
+            else:
+                data = json.dumps(event, cls=rem.JSONEncoder)
 
-        block.wait(STREAM_PING_INTERVAL)
+            to_write.put(data)
 
-        if block.is_set():
-            break
+        def stream():
+            """Stream events to response."""
+            self.hass.bus.listen(MATCH_ALL, forward_events)
 
-    if not gracefully_closed:
-        _LOGGER.info("Found broken event stream to %s, cleaning up",
-                     handler.client_address[0])
+            _LOGGER.debug('STREAM %s ATTACHED', id(stop_obj))
 
-    if restrict:
-        for event in restrict:
-            hass.bus.remove_listener(event, forward_events)
-    else:
-        hass.bus.remove_listener(MATCH_ALL, forward_events)
+            # Fire off one message right away to have browsers fire open event
+            to_write.put(STREAM_PING_PAYLOAD)
 
+            while True:
+                try:
+                    payload = to_write.get(timeout=STREAM_PING_INTERVAL)
 
-def _handle_get_api_config(handler, path_match, data):
-    """Return the Home Assistant configuration."""
-    handler.write_json(handler.server.hass.config.as_dict())
+                    if payload is stop_obj:
+                        break
 
+                    msg = "data: {}\n\n".format(payload)
+                    _LOGGER.debug('STREAM %s WRITING %s', id(stop_obj),
+                                  msg.strip())
+                    yield msg.encode("UTF-8")
+                except queue.Empty:
+                    to_write.put(STREAM_PING_PAYLOAD)
+                except GeneratorExit:
+                    break
 
-def _handle_get_api_states(handler, path_match, data):
-    """Return a dict containing all entity ids and their state."""
-    handler.write_json(handler.server.hass.states.all())
+            _LOGGER.debug('STREAM %s RESPONSE CLOSED', id(stop_obj))
+            self.hass.bus.remove_listener(MATCH_ALL, forward_events)
 
+        return self.Response(stream(), mimetype='text/event-stream')
 
-def _handle_get_api_states_entity(handler, path_match, data):
-    """Return the state of a specific entity."""
-    entity_id = path_match.group('entity_id')
 
-    state = handler.server.hass.states.get(entity_id)
+class APIConfigView(HomeAssistantView):
+    """View to handle Config requests."""
 
-    if state:
-        handler.write_json(state)
-    else:
-        handler.write_json_message("State does not exist.", HTTP_NOT_FOUND)
+    url = URL_API_CONFIG
+    name = "api:config"
 
+    def get(self, request):
+        """Get current configuration."""
+        return self.json(self.hass.config.as_dict())
 
-def _handle_post_state_entity(handler, path_match, data):
-    """Handle updating the state of an entity.
 
-    This handles the following paths:
-    /api/states/<entity_id>
-    """
-    entity_id = path_match.group('entity_id')
+class APIDiscoveryView(HomeAssistantView):
+    """View to provide discovery info."""
 
-    try:
-        new_state = data['state']
-    except KeyError:
-        handler.write_json_message("state not specified", HTTP_BAD_REQUEST)
-        return
+    requires_auth = False
+    url = URL_API_DISCOVERY_INFO
+    name = "api:discovery"
 
-    attributes = data['attributes'] if 'attributes' in data else None
+    def get(self, request):
+        """Get discovery info."""
+        needs_auth = self.hass.config.api.api_password is not None
+        return self.json({
+            'base_url': self.hass.config.api.base_url,
+            'location_name': self.hass.config.location_name,
+            'requires_api_password': needs_auth,
+            'version': __version__
+        })
 
-    is_new_state = handler.server.hass.states.get(entity_id) is None
 
-    # Write state
-    handler.server.hass.states.set(entity_id, new_state, attributes)
+class APIStatesView(HomeAssistantView):
+    """View to handle States requests."""
 
-    state = handler.server.hass.states.get(entity_id)
+    url = URL_API_STATES
+    name = "api:states"
 
-    status_code = HTTP_CREATED if is_new_state else HTTP_OK
+    def get(self, request):
+        """Get current states."""
+        return self.json(self.hass.states.all())
 
-    handler.write_json(
-        state.as_dict(),
-        status_code=status_code,
-        location=URL_API_STATES_ENTITY.format(entity_id))
 
+class APIEntityStateView(HomeAssistantView):
+    """View to handle EntityState requests."""
 
-def _handle_delete_state_entity(handler, path_match, data):
-    """Handle request to delete an entity from state machine.
+    url = "/api/states/<entity(exist=False):entity_id>"
+    name = "api:entity-state"
 
-    This handles the following paths:
-    /api/states/<entity_id>
-    """
-    entity_id = path_match.group('entity_id')
+    def get(self, request, entity_id):
+        """Retrieve state of entity."""
+        state = self.hass.states.get(entity_id)
+        if state:
+            return self.json(state)
+        else:
+            return self.json_message('Entity not found', HTTP_NOT_FOUND)
 
-    if handler.server.hass.states.remove(entity_id):
-        handler.write_json_message(
-            "Entity not found", HTTP_NOT_FOUND)
-    else:
-        handler.write_json_message(
-            "Entity removed", HTTP_OK)
+    def post(self, request, entity_id):
+        """Update state of entity."""
+        try:
+            new_state = request.json['state']
+        except KeyError:
+            return self.json_message('No state specified', HTTP_BAD_REQUEST)
 
+        attributes = request.json.get('attributes')
+        force_update = request.json.get('force_update', False)
 
-def _handle_get_api_events(handler, path_match, data):
-    """Handle getting overview of event listeners."""
-    handler.write_json(events_json(handler.server.hass))
+        is_new_state = self.hass.states.get(entity_id) is None
 
+        # Write state
+        self.hass.states.set(entity_id, new_state, attributes, force_update)
 
-def _handle_api_post_events_event(handler, path_match, event_data):
-    """Handle firing of an event.
+        # Read the state back for our response
+        resp = self.json(self.hass.states.get(entity_id))
 
-    This handles the following paths: /api/events/<event_type>
+        if is_new_state:
+            resp.status_code = HTTP_CREATED
 
-    Events from /api are threated as remote events.
-    """
-    event_type = path_match.group('event_type')
+        resp.headers.add('Location', URL_API_STATES_ENTITY.format(entity_id))
 
-    if event_data is not None and not isinstance(event_data, dict):
-        handler.write_json_message(
-            "event_data should be an object", HTTP_UNPROCESSABLE_ENTITY)
-        return
+        return resp
 
-    event_origin = ha.EventOrigin.remote
+    def delete(self, request, entity_id):
+        """Remove entity."""
+        if self.hass.states.remove(entity_id):
+            return self.json_message('Entity removed')
+        else:
+            return self.json_message('Entity not found', HTTP_NOT_FOUND)
 
-    # Special case handling for event STATE_CHANGED
-    # We will try to convert state dicts back to State objects
-    if event_type == ha.EVENT_STATE_CHANGED and event_data:
-        for key in ('old_state', 'new_state'):
-            state = ha.State.from_dict(event_data.get(key))
 
-            if state:
-                event_data[key] = state
+class APIEventListenersView(HomeAssistantView):
+    """View to handle EventListeners requests."""
 
-    handler.server.hass.bus.fire(event_type, event_data, event_origin)
+    url = URL_API_EVENTS
+    name = "api:event-listeners"
 
-    handler.write_json_message("Event {} fired.".format(event_type))
+    def get(self, request):
+        """Get event listeners."""
+        return self.json(events_json(self.hass))
 
 
-def _handle_get_api_services(handler, path_match, data):
-    """Handle getting overview of services."""
-    handler.write_json(services_json(handler.server.hass))
+class APIEventView(HomeAssistantView):
+    """View to handle Event requests."""
 
+    url = '/api/events/<event_type>'
+    name = "api:event"
 
-# pylint: disable=invalid-name
-def _handle_post_api_services_domain_service(handler, path_match, data):
-    """Handle calling a service.
+    def post(self, request, event_type):
+        """Fire events."""
+        event_data = request.json
 
-    This handles the following paths: /api/services/<domain>/<service>
-    """
-    domain = path_match.group('domain')
-    service = path_match.group('service')
+        if event_data is not None and not isinstance(event_data, dict):
+            return self.json_message('Event data should be a JSON object',
+                                     HTTP_BAD_REQUEST)
 
-    with TrackStates(handler.server.hass) as changed_states:
-        handler.server.hass.services.call(domain, service, data, True)
+        # Special case handling for event STATE_CHANGED
+        # We will try to convert state dicts back to State objects
+        if event_type == ha.EVENT_STATE_CHANGED and event_data:
+            for key in ('old_state', 'new_state'):
+                state = ha.State.from_dict(event_data.get(key))
 
-    handler.write_json(changed_states)
+                if state:
+                    event_data[key] = state
 
+        self.hass.bus.fire(event_type, event_data, ha.EventOrigin.remote)
 
-# pylint: disable=invalid-name
-def _handle_post_api_event_forward(handler, path_match, data):
-    """Handle adding an event forwarding target."""
-    try:
-        host = data['host']
-        api_password = data['api_password']
-    except KeyError:
-        handler.write_json_message(
-            "No host or api_password received.", HTTP_BAD_REQUEST)
-        return
+        return self.json_message("Event {} fired.".format(event_type))
 
-    try:
-        port = int(data['port']) if 'port' in data else None
-    except ValueError:
-        handler.write_json_message(
-            "Invalid value received for port", HTTP_UNPROCESSABLE_ENTITY)
-        return
 
-    api = rem.API(host, api_password, port)
+class APIServicesView(HomeAssistantView):
+    """View to handle Services requests."""
 
-    if not api.validate_api():
-        handler.write_json_message(
-            "Unable to validate API", HTTP_UNPROCESSABLE_ENTITY)
-        return
+    url = URL_API_SERVICES
+    name = "api:services"
 
-    if handler.server.event_forwarder is None:
-        handler.server.event_forwarder = \
-            rem.EventForwarder(handler.server.hass)
+    def get(self, request):
+        """Get registered services."""
+        return self.json(services_json(self.hass))
 
-    handler.server.event_forwarder.connect(api)
 
-    handler.write_json_message("Event forwarding setup.")
+class APIDomainServicesView(HomeAssistantView):
+    """View to handle DomainServices requests."""
 
+    url = "/api/services/<domain>/<service>"
+    name = "api:domain-services"
 
-def _handle_delete_api_event_forward(handler, path_match, data):
-    """Handle deleting an event forwarding target."""
-    try:
-        host = data['host']
-    except KeyError:
-        handler.write_json_message("No host received.", HTTP_BAD_REQUEST)
-        return
+    def post(self, request, domain, service):
+        """Call a service.
 
-    try:
-        port = int(data['port']) if 'port' in data else None
-    except ValueError:
-        handler.write_json_message(
-            "Invalid value received for port", HTTP_UNPROCESSABLE_ENTITY)
-        return
+        Returns a list of changed states.
+        """
+        with TrackStates(self.hass) as changed_states:
+            self.hass.services.call(domain, service, request.json, True)
 
-    if handler.server.event_forwarder is not None:
-        api = rem.API(host, None, port)
+        return self.json(changed_states)
 
-        handler.server.event_forwarder.disconnect(api)
 
-    handler.write_json_message("Event forwarding cancelled.")
+class APIEventForwardingView(HomeAssistantView):
+    """View to handle EventForwarding requests."""
 
+    url = URL_API_EVENT_FORWARD
+    name = "api:event-forward"
+    event_forwarder = None
 
-def _handle_get_api_components(handler, path_match, data):
-    """Return all the loaded components."""
-    handler.write_json(handler.server.hass.config.components)
+    def post(self, request):
+        """Setup an event forwarder."""
+        data = request.json
+        if data is None:
+            return self.json_message("No data received.", HTTP_BAD_REQUEST)
+        try:
+            host = data['host']
+            api_password = data['api_password']
+        except KeyError:
+            return self.json_message("No host or api_password received.",
+                                     HTTP_BAD_REQUEST)
 
+        try:
+            port = int(data['port']) if 'port' in data else None
+        except ValueError:
+            return self.json_message("Invalid value received for port.",
+                                     HTTP_UNPROCESSABLE_ENTITY)
 
-def _handle_get_api_error_log(handler, path_match, data):
-    """Return the logged errors for this session."""
-    handler.write_file(handler.server.hass.config.path(ERROR_LOG_FILENAME),
-                       False)
+        api = rem.API(host, api_password, port)
 
+        if not api.validate_api():
+            return self.json_message("Unable to validate API.",
+                                     HTTP_UNPROCESSABLE_ENTITY)
 
-def _handle_post_api_log_out(handler, path_match, data):
-    """Log user out."""
-    handler.send_response(HTTP_OK)
-    handler.destroy_session()
-    handler.end_headers()
+        if self.event_forwarder is None:
+            self.event_forwarder = rem.EventForwarder(self.hass)
 
+        self.event_forwarder.connect(api)
 
-def _handle_post_api_template(handler, path_match, data):
-    """Log user out."""
-    template_string = data.get('template', '')
+        return self.json_message("Event forwarding setup.")
 
-    try:
-        rendered = template.render(handler.server.hass, template_string)
+    def delete(self, request):
+        """Remove event forwarer."""
+        data = request.json
+        if data is None:
+            return self.json_message("No data received.", HTTP_BAD_REQUEST)
 
-        handler.send_response(HTTP_OK)
-        handler.send_header(HTTP_HEADER_CONTENT_TYPE, CONTENT_TYPE_TEXT_PLAIN)
-        handler.end_headers()
-        handler.wfile.write(rendered.encode('utf-8'))
-    except TemplateError as e:
-        handler.write_json_message(str(e), HTTP_UNPROCESSABLE_ENTITY)
-        return
+        try:
+            host = data['host']
+        except KeyError:
+            return self.json_message("No host received.", HTTP_BAD_REQUEST)
+
+        try:
+            port = int(data['port']) if 'port' in data else None
+        except ValueError:
+            return self.json_message("Invalid value received for port.",
+                                     HTTP_UNPROCESSABLE_ENTITY)
+
+        if self.event_forwarder is not None:
+            api = rem.API(host, None, port)
+
+            self.event_forwarder.disconnect(api)
+
+        return self.json_message("Event forwarding cancelled.")
+
+
+class APIComponentsView(HomeAssistantView):
+    """View to handle Components requests."""
+
+    url = URL_API_COMPONENTS
+    name = "api:components"
+
+    def get(self, request):
+        """Get current loaded components."""
+        return self.json(self.hass.config.components)
+
+
+class APIErrorLogView(HomeAssistantView):
+    """View to handle ErrorLog requests."""
+
+    url = URL_API_ERROR_LOG
+    name = "api:error-log"
+
+    def get(self, request):
+        """Serve error log."""
+        return self.file(request, self.hass.config.path(ERROR_LOG_FILENAME))
+
+
+class APITemplateView(HomeAssistantView):
+    """View to handle requests."""
+
+    url = URL_API_TEMPLATE
+    name = "api:template"
+
+    def post(self, request):
+        """Render a template."""
+        try:
+            return template.render(self.hass, request.json['template'],
+                                   request.json.get('variables'))
+        except TemplateError as ex:
+            return self.json_message('Error rendering template: {}'.format(ex),
+                                     HTTP_BAD_REQUEST)
 
 
 def services_json(hass):

homeassistant/components/arduino.py

@@ -11,7 +11,7 @@ from homeassistant.const import (
 from homeassistant.helpers import validate_config
 
 DOMAIN = "arduino"
-REQUIREMENTS = ['PyMata==2.07a']
+REQUIREMENTS = ['PyMata==2.12']
 BOARD = None
 _LOGGER = logging.getLogger(__name__)
 
@@ -69,7 +69,7 @@ class ArduinoBoard(object):
                                      self._board.ANALOG)
         elif mode == 'digital' and direction == 'in':
             self._board.set_pin_mode(pin,
-                                     self._board.OUTPUT,
+                                     self._board.INPUT,
                                      self._board.DIGITAL)
         elif mode == 'digital' and direction == 'out':
             self._board.set_pin_mode(pin,

homeassistant/components/automation/__init__.py

@@ -6,13 +6,15 @@ https://home-assistant.io/components/automation/
 """
 import logging
 
-from homeassistant.bootstrap import prepare_setup_platform
-from homeassistant.const import CONF_PLATFORM
-from homeassistant.components import logbook
-from homeassistant.helpers import extract_domain_configs
-from homeassistant.helpers.service import (call_from_config,
-                                           validate_service_call)
+import voluptuous as vol
 
+from homeassistant.bootstrap import prepare_setup_platform
+from homeassistant.const import ATTR_ENTITY_ID, CONF_PLATFORM
+from homeassistant.components import logbook
+from homeassistant.exceptions import HomeAssistantError
+from homeassistant.helpers import extract_domain_configs, script, condition
+from homeassistant.loader import get_platform
+import homeassistant.helpers.config_validation as cv
 
 DOMAIN = 'automation'
 
@@ -31,33 +33,86 @@ CONDITION_TYPE_OR = 'or'
 
 DEFAULT_CONDITION_TYPE = CONDITION_TYPE_AND
 
+METHOD_TRIGGER = 'trigger'
+METHOD_IF_ACTION = 'if_action'
+
 _LOGGER = logging.getLogger(__name__)
 
 
+def _platform_validator(method, schema):
+    """Generate platform validator for different steps."""
+    def validator(config):
+        """Validate it is a valid  platform."""
+        platform = get_platform(DOMAIN, config[CONF_PLATFORM])
+
+        if not hasattr(platform, method):
+            raise vol.Invalid('invalid method platform')
+
+        if not hasattr(platform, schema):
+            return config
+
+        return getattr(platform, schema)(config)
+
+    return validator
+
+_TRIGGER_SCHEMA = vol.All(
+    cv.ensure_list,
+    [
+        vol.All(
+            vol.Schema({
+                vol.Required(CONF_PLATFORM): cv.platform_validator(DOMAIN)
+            }, extra=vol.ALLOW_EXTRA),
+            _platform_validator(METHOD_TRIGGER, 'TRIGGER_SCHEMA')
+        ),
+    ]
+)
+
+_CONDITION_SCHEMA = vol.Any(
+    CONDITION_USE_TRIGGER_VALUES,
+    vol.All(
+        cv.ensure_list,
+        [
+            vol.All(
+                vol.Schema({
+                    CONF_PLATFORM: str,
+                    CONF_CONDITION: str,
+                }, extra=vol.ALLOW_EXTRA),
+                cv.has_at_least_one_key(CONF_PLATFORM, CONF_CONDITION),
+            ),
+        ]
+    )
+)
+
+PLATFORM_SCHEMA = vol.Schema({
+    CONF_ALIAS: cv.string,
+    vol.Required(CONF_TRIGGER): _TRIGGER_SCHEMA,
+    vol.Required(CONF_CONDITION_TYPE, default=DEFAULT_CONDITION_TYPE):
+        vol.All(vol.Lower, vol.Any(CONDITION_TYPE_AND, CONDITION_TYPE_OR)),
+    CONF_CONDITION: _CONDITION_SCHEMA,
+    vol.Required(CONF_ACTION): cv.SCRIPT_SCHEMA,
+})
+
+
 def setup(hass, config):
     """Setup the automation."""
+    success = False
     for config_key in extract_domain_configs(config, DOMAIN):
         conf = config[config_key]
 
-        if not isinstance(conf, list):
-            conf = [conf]
-
         for list_no, config_block in enumerate(conf):
             name = config_block.get(CONF_ALIAS, "{}, {}".format(config_key,
                                                                 list_no))
-            _setup_automation(hass, config_block, name, config)
+            success = (_setup_automation(hass, config_block, name, config) or
+                       success)
 
-    return True
+    return success
 
 
 def _setup_automation(hass, config_block, name, config):
     """Setup one instance of automation."""
     action = _get_action(hass, config_block.get(CONF_ACTION, {}), name)
 
-    if action is None:
-        return False
-
-    if CONF_CONDITION in config_block or CONF_CONDITION_TYPE in config_block:
+    if CONF_CONDITION in config_block:
         action = _process_if(hass, config, config_block, action)
 
         if action is None:
@@ -70,17 +125,13 @@ def _setup_automation(hass, config_block, name, config):
 
 def _get_action(hass, config, name):
     """Return an action based on a configuration."""
-    validation_error = validate_service_call(config)
-    if validation_error:
-        _LOGGER.error(validation_error)
-        return None
+    script_obj = script.Script(hass, config, name)
 
-    def action():
+    def action(variables=None):
         """Action to be executed."""
         _LOGGER.info('Executing %s', name)
         logbook.log_entry(hass, name, 'has been triggered', DOMAIN)
-
-        call_from_config(hass, config)
+        script_obj.run(variables)
 
     return action
 
@@ -90,51 +141,62 @@ def _process_if(hass, config, p_config, action):
     cond_type = p_config.get(CONF_CONDITION_TYPE,
                              DEFAULT_CONDITION_TYPE).lower()
 
+    # Deprecated since 0.19 - 5/5/2016
+    if cond_type != DEFAULT_CONDITION_TYPE:
+        _LOGGER.warning('Using condition_type: "or" is deprecated. Please use '
+                        '"condition: or" instead.')
+
     if_configs = p_config.get(CONF_CONDITION)
     use_trigger = if_configs == CONDITION_USE_TRIGGER_VALUES
 
     if use_trigger:
         if_configs = p_config[CONF_TRIGGER]
 
-    if isinstance(if_configs, dict):
-        if_configs = [if_configs]
-
     checks = []
     for if_config in if_configs:
-        platform = _resolve_platform('if_action', hass, config,
-                                     if_config.get(CONF_PLATFORM))
-        if platform is None:
-            continue
+        # Deprecated except for used by use_trigger_values
+        # since 0.19 - 5/5/2016
+        if CONF_PLATFORM in if_config:
+            if not use_trigger:
+                _LOGGER.warning("Please switch your condition configuration "
+                                "to use 'condition' instead of 'platform'.")
+            if_config = dict(if_config)
+            if_config[CONF_CONDITION] = if_config.pop(CONF_PLATFORM)
 
-        check = platform.if_action(hass, if_config)
+            # To support use_trigger_values with state trigger accepting
+            # multiple entity_ids to monitor.
+            if_entity_id = if_config.get(ATTR_ENTITY_ID)
+            if isinstance(if_entity_id, list) and len(if_entity_id) == 1:
+                if_config[ATTR_ENTITY_ID] = if_entity_id[0]
 
-        # Invalid conditions are allowed if we base it on trigger
-        if check is None and not use_trigger:
-            return None
-
-        checks.append(check)
+        try:
+            checks.append(condition.from_config(if_config))
+        except HomeAssistantError as ex:
+            # Invalid conditions are allowed if we base it on trigger
+            if use_trigger:
+                _LOGGER.warning('Ignoring invalid condition: %s', ex)
+            else:
+                _LOGGER.warning('Invalid condition: %s', ex)
+                return None
 
     if cond_type == CONDITION_TYPE_AND:
-        def if_action():
+        def if_action(variables=None):
             """AND all conditions."""
-            if all(check() for check in checks):
-                action()
+            if all(check(hass, variables) for check in checks):
+                action(variables)
     else:
-        def if_action():
+        def if_action(variables=None):
             """OR all conditions."""
-            if any(check() for check in checks):
-                action()
+            if any(check(hass, variables) for check in checks):
+                action(variables)
 
     return if_action
 
 
 def _process_trigger(hass, config, trigger_configs, name, action):
     """Setup the triggers."""
-    if isinstance(trigger_configs, dict):
-        trigger_configs = [trigger_configs]
-
     for conf in trigger_configs:
-        platform = _resolve_platform('trigger', hass, config,
+        platform = _resolve_platform(METHOD_TRIGGER, hass, config,
                                      conf.get(CONF_PLATFORM))
         if platform is None:
             continue

homeassistant/components/automation/event.py

@@ -6,27 +6,38 @@ at https://home-assistant.io/components/automation/#event-trigger
 """
 import logging
 
+import voluptuous as vol
+
+from homeassistant.const import CONF_PLATFORM
+from homeassistant.helpers import config_validation as cv
+
 CONF_EVENT_TYPE = "event_type"
 CONF_EVENT_DATA = "event_data"
 
 _LOGGER = logging.getLogger(__name__)
 
+TRIGGER_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): 'event',
+    vol.Required(CONF_EVENT_TYPE): cv.string,
+    vol.Optional(CONF_EVENT_DATA): dict,
+})
+
 
 def trigger(hass, config, action):
     """Listen for events based on configuration."""
     event_type = config.get(CONF_EVENT_TYPE)
-
-    if event_type is None:
-        _LOGGER.error("Missing configuration key %s", CONF_EVENT_TYPE)
-        return False
-
     event_data = config.get(CONF_EVENT_DATA)
 
     def handle_event(event):
         """Listen for events and calls the action when data matches."""
         if not event_data or all(val == event.data.get(key) for key, val
                                  in event_data.items()):
-            action()
+            action({
+                'trigger': {
+                    'platform': 'event',
+                    'event': event,
+                },
+            })
 
     hass.bus.listen(event_type, handle_event)
     return True

homeassistant/components/automation/mqtt.py

@@ -4,30 +4,40 @@ Offer MQTT listening automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#mqtt-trigger
 """
-import logging
+import voluptuous as vol
 
 import homeassistant.components.mqtt as mqtt
+from homeassistant.const import CONF_PLATFORM
+import homeassistant.helpers.config_validation as cv
 
 DEPENDENCIES = ['mqtt']
 
 CONF_TOPIC = 'topic'
 CONF_PAYLOAD = 'payload'
 
+TRIGGER_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): mqtt.DOMAIN,
+    vol.Required(CONF_TOPIC): mqtt.valid_subscribe_topic,
+    vol.Optional(CONF_PAYLOAD): cv.string,
+})
+
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
-    topic = config.get(CONF_TOPIC)
+    topic = config[CONF_TOPIC]
     payload = config.get(CONF_PAYLOAD)
 
-    if topic is None:
-        logging.getLogger(__name__).error(
-            "Missing configuration key %s", CONF_TOPIC)
-        return False
-
     def mqtt_automation_listener(msg_topic, msg_payload, qos):
         """Listen for MQTT messages."""
         if payload is None or payload == msg_payload:
-            action()
+            action({
+                'trigger': {
+                    'platform': 'mqtt',
+                    'topic': msg_topic,
+                    'payload': msg_payload,
+                    'qos': qos,
+                }
+            })
 
     mqtt.subscribe(hass, topic, mqtt_automation_listener)
 

homeassistant/components/automation/numeric_state.py

@@ -5,101 +5,65 @@ For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#numeric-state-trigger
 """
 import logging
-from functools import partial
 
-from homeassistant.const import CONF_VALUE_TEMPLATE
+import voluptuous as vol
+
+from homeassistant.const import (
+    CONF_VALUE_TEMPLATE, CONF_PLATFORM, CONF_ENTITY_ID,
+    CONF_BELOW, CONF_ABOVE)
 from homeassistant.helpers.event import track_state_change
-from homeassistant.helpers import template
+from homeassistant.helpers import condition, config_validation as cv
 
-CONF_ENTITY_ID = "entity_id"
-CONF_BELOW = "below"
-CONF_ABOVE = "above"
+TRIGGER_SCHEMA = vol.All(vol.Schema({
+    vol.Required(CONF_PLATFORM): 'numeric_state',
+    vol.Required(CONF_ENTITY_ID): cv.entity_ids,
+    CONF_BELOW: vol.Coerce(float),
+    CONF_ABOVE: vol.Coerce(float),
+    vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
+}), cv.has_at_least_one_key(CONF_BELOW, CONF_ABOVE))
 
 _LOGGER = logging.getLogger(__name__)
 
 
-def _renderer(hass, value_template, state):
-    """Render the state value."""
-    if value_template is None:
-        return state.state
-
-    return template.render(hass, value_template, {'state': state})
-
-
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     entity_id = config.get(CONF_ENTITY_ID)
-
-    if entity_id is None:
-        _LOGGER.error("Missing configuration key %s", CONF_ENTITY_ID)
-        return False
-
     below = config.get(CONF_BELOW)
     above = config.get(CONF_ABOVE)
     value_template = config.get(CONF_VALUE_TEMPLATE)
 
-    if below is None and above is None:
-        _LOGGER.error("Missing configuration key."
-                      " One of %s or %s is required",
-                      CONF_BELOW, CONF_ABOVE)
-        return False
-
-    renderer = partial(_renderer, hass, value_template)
-
     # pylint: disable=unused-argument
     def state_automation_listener(entity, from_s, to_s):
         """Listen for state changes and calls action."""
-        # Fire action if we go from outside range into range
-        if _in_range(above, below, renderer(to_s)) and \
-           (from_s is None or not _in_range(above, below, renderer(from_s))):
-            action()
+        if to_s is None:
+            return
+
+        variables = {
+            'trigger': {
+                'platform': 'numeric_state',
+                'entity_id': entity,
+                'below': below,
+                'above': above,
+            }
+        }
+
+        # If new one doesn't match, nothing to do
+        if not condition.numeric_state(
+                hass, to_s, below, above, value_template, variables):
+            return
+
+        # Only match if old didn't exist or existed but didn't match
+        # Written as: skip if old one did exist and matched
+        if from_s is not None and condition.numeric_state(
+                hass, from_s, below, above, value_template, variables):
+            return
+
+        variables['trigger']['from_state'] = from_s
+        variables['trigger']['to_state'] = to_s
+
+        action(variables)
 
     track_state_change(
         hass, entity_id, state_automation_listener)
 
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with state based condition."""
-    entity_id = config.get(CONF_ENTITY_ID)
-
-    if entity_id is None:
-        _LOGGER.error("Missing configuration key %s", CONF_ENTITY_ID)
-        return None
-
-    below = config.get(CONF_BELOW)
-    above = config.get(CONF_ABOVE)
-    value_template = config.get(CONF_VALUE_TEMPLATE)
-
-    if below is None and above is None:
-        _LOGGER.error("Missing configuration key."
-                      " One of %s or %s is required",
-                      CONF_BELOW, CONF_ABOVE)
-        return None
-
-    renderer = partial(_renderer, hass, value_template)
-
-    def if_numeric_state():
-        """Test numeric state condition."""
-        state = hass.states.get(entity_id)
-        return state is not None and _in_range(above, below, renderer(state))
-
-    return if_numeric_state
-
-
-def _in_range(range_start, range_end, value):
-    """Check if value is inside the range."""
-    try:
-        value = float(value)
-    except ValueError:
-        _LOGGER.warning("Value returned from template is not a number: %s",
-                        value)
-        return False
-
-    if range_start is not None and range_end is not None:
-        return float(range_start) <= value < float(range_end)
-    elif range_end is not None:
-        return value < float(range_end)
-    else:
-        return float(range_start) <= value

homeassistant/components/automation/state.py

@@ -4,16 +4,13 @@ Offer state listening automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#state-trigger
 """
-import logging
-from datetime import timedelta
+import voluptuous as vol
 
 import homeassistant.util.dt as dt_util
-
 from homeassistant.const import (
-    EVENT_STATE_CHANGED, EVENT_TIME_CHANGED, MATCH_ALL)
-from homeassistant.components.automation.time import (
-    CONF_HOURS, CONF_MINUTES, CONF_SECONDS)
+    EVENT_STATE_CHANGED, EVENT_TIME_CHANGED, MATCH_ALL, CONF_PLATFORM)
 from homeassistant.helpers.event import track_state_change, track_point_in_time
+import homeassistant.helpers.config_validation as cv
 
 CONF_ENTITY_ID = "entity_id"
 CONF_FROM = "from"
@@ -21,109 +18,68 @@ CONF_TO = "to"
 CONF_STATE = "state"
 CONF_FOR = "for"
 
-
-def get_time_config(config):
-    """Helper function to extract the time specified in the configuration."""
-    if CONF_FOR not in config:
-        return None
-
-    hours = config[CONF_FOR].get(CONF_HOURS)
-    minutes = config[CONF_FOR].get(CONF_MINUTES)
-    seconds = config[CONF_FOR].get(CONF_SECONDS)
-
-    if hours is None and minutes is None and seconds is None:
-        logging.getLogger(__name__).error(
-            "Received invalid value for '%s': %s",
-            config[CONF_FOR], CONF_FOR)
-        return None
-
-    if config.get(CONF_TO) is None and config.get(CONF_STATE) is None:
-        logging.getLogger(__name__).error(
-            "For: requires a to: value'%s': %s",
-            config[CONF_FOR], CONF_FOR)
-        return None
-
-    return timedelta(hours=(hours or 0.0),
-                     minutes=(minutes or 0.0),
-                     seconds=(seconds or 0.0))
+TRIGGER_SCHEMA = vol.All(
+    vol.Schema({
+        vol.Required(CONF_PLATFORM): 'state',
+        vol.Required(CONF_ENTITY_ID): cv.entity_ids,
+        # These are str on purpose. Want to catch YAML conversions
+        CONF_FROM: str,
+        CONF_TO: str,
+        CONF_STATE: str,
+        CONF_FOR: vol.All(cv.time_period, cv.positive_timedelta),
+    }),
+    vol.Any(cv.key_dependency(CONF_FOR, CONF_TO),
+            cv.key_dependency(CONF_FOR, CONF_STATE))
+)
 
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     entity_id = config.get(CONF_ENTITY_ID)
-
-    if entity_id is None:
-        logging.getLogger(__name__).error(
-            "Missing trigger configuration key %s", CONF_ENTITY_ID)
-        return None
-
     from_state = config.get(CONF_FROM, MATCH_ALL)
     to_state = config.get(CONF_TO) or config.get(CONF_STATE) or MATCH_ALL
-    time_delta = get_time_config(config)
-
-    if isinstance(from_state, bool) or isinstance(to_state, bool):
-        logging.getLogger(__name__).error(
-            'Config error. Surround to/from values with quotes.')
-        return None
-
-    if CONF_FOR in config and time_delta is None:
-        return None
+    time_delta = config.get(CONF_FOR)
 
     def state_automation_listener(entity, from_s, to_s):
         """Listen for state changes and calls action."""
+        def call_action():
+            """Call action with right context."""
+            action({
+                'trigger': {
+                    'platform': 'state',
+                    'entity_id': entity,
+                    'from_state': from_s,
+                    'to_state': to_s,
+                    'for': time_delta,
+                }
+            })
+
+        if time_delta is None:
+            call_action()
+            return
+
         def state_for_listener(now):
             """Fire on state changes after a delay and calls action."""
             hass.bus.remove_listener(
-                EVENT_STATE_CHANGED, for_state_listener)
-            action()
+                EVENT_STATE_CHANGED, attached_state_for_cancel)
+            call_action()
 
         def state_for_cancel_listener(entity, inner_from_s, inner_to_s):
             """Fire on changes and cancel for listener if changed."""
-            if inner_to_s == to_s:
+            if inner_to_s.state == to_s.state:
                 return
-            hass.bus.remove_listener(EVENT_TIME_CHANGED, for_time_listener)
-            hass.bus.remove_listener(
-                EVENT_STATE_CHANGED, for_state_listener)
+            hass.bus.remove_listener(EVENT_TIME_CHANGED,
+                                     attached_state_for_listener)
+            hass.bus.remove_listener(EVENT_STATE_CHANGED,
+                                     attached_state_for_cancel)
 
-        if time_delta is not None:
-            target_tm = dt_util.utcnow() + time_delta
-            for_time_listener = track_point_in_time(
-                hass, state_for_listener, target_tm)
-            for_state_listener = track_state_change(
-                hass, entity_id, state_for_cancel_listener,
-                MATCH_ALL, MATCH_ALL)
-        else:
-            action()
+        attached_state_for_listener = track_point_in_time(
+            hass, state_for_listener, dt_util.utcnow() + time_delta)
+
+        attached_state_for_cancel = track_state_change(
+            hass, entity, state_for_cancel_listener)
 
     track_state_change(
         hass, entity_id, state_automation_listener, from_state, to_state)
 
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with state based condition."""
-    entity_id = config.get(CONF_ENTITY_ID)
-    state = config.get(CONF_STATE)
-
-    if entity_id is None or state is None:
-        logging.getLogger(__name__).error(
-            "Missing if-condition configuration key %s or %s", CONF_ENTITY_ID,
-            CONF_STATE)
-        return None
-
-    time_delta = get_time_config(config)
-    if CONF_FOR in config and time_delta is None:
-        return None
-
-    state = str(state)
-
-    def if_state():
-        """Test if condition."""
-        is_state = hass.states.is_state(entity_id, state)
-        return (time_delta is None and is_state or
-                time_delta is not None and
-                dt_util.utcnow() - time_delta >
-                hass.states.get(entity_id).last_changed)
-
-    return if_state

homeassistant/components/automation/sun.py

@@ -4,143 +4,46 @@ Offer sun based automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#sun-trigger
 """
-import logging
 from datetime import timedelta
+import logging
 
-import homeassistant.util.dt as dt_util
-from homeassistant.components import sun
+import voluptuous as vol
+
+from homeassistant.const import (
+    CONF_EVENT, CONF_OFFSET, CONF_PLATFORM, SUN_EVENT_SUNRISE)
 from homeassistant.helpers.event import track_sunrise, track_sunset
+import homeassistant.helpers.config_validation as cv
 
 DEPENDENCIES = ['sun']
 
-CONF_OFFSET = 'offset'
-CONF_EVENT = 'event'
-CONF_BEFORE = "before"
-CONF_BEFORE_OFFSET = "before_offset"
-CONF_AFTER = "after"
-CONF_AFTER_OFFSET = "after_offset"
-
-EVENT_SUNSET = 'sunset'
-EVENT_SUNRISE = 'sunrise'
-
 _LOGGER = logging.getLogger(__name__)
 
+TRIGGER_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): 'sun',
+    vol.Required(CONF_EVENT): cv.sun_event,
+    vol.Required(CONF_OFFSET, default=timedelta(0)): cv.time_period,
+})
+
 
 def trigger(hass, config, action):
     """Listen for events based on configuration."""
     event = config.get(CONF_EVENT)
+    offset = config.get(CONF_OFFSET)
 
-    if event is None:
-        _LOGGER.error("Missing configuration key %s", CONF_EVENT)
-        return False
-
-    event = event.lower()
-    if event not in (EVENT_SUNRISE, EVENT_SUNSET):
-        _LOGGER.error("Invalid value for %s: %s", CONF_EVENT, event)
-        return False
-
-    offset = _parse_offset(config.get(CONF_OFFSET))
-    if offset is False:
-        return False
+    def call_action():
+        """Call action with right context."""
+        action({
+            'trigger': {
+                'platform': 'sun',
+                'event': event,
+                'offset': offset,
+            },
+        })
 
     # Do something to call action
-    if event == EVENT_SUNRISE:
-        track_sunrise(hass, action, offset)
+    if event == SUN_EVENT_SUNRISE:
+        track_sunrise(hass, call_action, offset)
     else:
-        track_sunset(hass, action, offset)
+        track_sunset(hass, call_action, offset)
 
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with sun based condition."""
-    before = config.get(CONF_BEFORE)
-    after = config.get(CONF_AFTER)
-
-    # Make sure required configuration keys are present
-    if before is None and after is None:
-        logging.getLogger(__name__).error(
-            "Missing if-condition configuration key %s or %s",
-            CONF_BEFORE, CONF_AFTER)
-        return None
-
-    # Make sure configuration keys have the right value
-    if before not in (None, EVENT_SUNRISE, EVENT_SUNSET) or \
-       after not in (None, EVENT_SUNRISE, EVENT_SUNSET):
-        logging.getLogger(__name__).error(
-            "%s and %s can only be set to %s or %s",
-            CONF_BEFORE, CONF_AFTER, EVENT_SUNRISE, EVENT_SUNSET)
-        return None
-
-    before_offset = _parse_offset(config.get(CONF_BEFORE_OFFSET))
-    after_offset = _parse_offset(config.get(CONF_AFTER_OFFSET))
-    if before_offset is False or after_offset is False:
-        return None
-
-    if before is None:
-        def before_func():
-            """Return no point in time."""
-            return None
-    elif before == EVENT_SUNRISE:
-        def before_func():
-            """Return time before sunrise."""
-            return sun.next_rising(hass) + before_offset
-    else:
-        def before_func():
-            """Return time before sunset."""
-            return sun.next_setting(hass) + before_offset
-
-    if after is None:
-        def after_func():
-            """Return no point in time."""
-            return None
-    elif after == EVENT_SUNRISE:
-        def after_func():
-            """Return time after sunrise."""
-            return sun.next_rising(hass) + after_offset
-    else:
-        def after_func():
-            """Return time after sunset."""
-            return sun.next_setting(hass) + after_offset
-
-    def time_if():
-        """Validate time based if-condition."""
-        now = dt_util.now()
-        before = before_func()
-        after = after_func()
-
-        if before is not None and now > now.replace(hour=before.hour,
-                                                    minute=before.minute):
-            return False
-
-        if after is not None and now < now.replace(hour=after.hour,
-                                                   minute=after.minute):
-            return False
-
-        return True
-
-    return time_if
-
-
-def _parse_offset(raw_offset):
-    """Parse the offset."""
-    if raw_offset is None:
-        return timedelta(0)
-
-    negative_offset = False
-    if raw_offset.startswith('-'):
-        negative_offset = True
-        raw_offset = raw_offset[1:]
-
-    try:
-        (hour, minute, second) = [int(x) for x in raw_offset.split(':')]
-    except ValueError:
-        _LOGGER.error('Could not parse offset %s', raw_offset)
-        return False
-
-    offset = timedelta(hours=hour, minutes=minute, seconds=second)
-
-    if negative_offset:
-        offset *= -1
-
-    return offset

homeassistant/components/automation/template.py

@@ -6,62 +6,48 @@ at https://home-assistant.io/components/automation/#template-trigger
 """
 import logging
 
-from homeassistant.const import CONF_VALUE_TEMPLATE, EVENT_STATE_CHANGED
-from homeassistant.exceptions import TemplateError
-from homeassistant.helpers import template
+import voluptuous as vol
+
+from homeassistant.const import (
+    CONF_VALUE_TEMPLATE, CONF_PLATFORM, MATCH_ALL)
+from homeassistant.helpers import condition
+from homeassistant.helpers.event import track_state_change
+import homeassistant.helpers.config_validation as cv
+
 
 _LOGGER = logging.getLogger(__name__)
 
+TRIGGER_SCHEMA = IF_ACTION_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): 'template',
+    vol.Required(CONF_VALUE_TEMPLATE): cv.template,
+})
+
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     value_template = config.get(CONF_VALUE_TEMPLATE)
 
-    if value_template is None:
-        _LOGGER.error("Missing configuration key %s", CONF_VALUE_TEMPLATE)
-        return False
-
     # Local variable to keep track of if the action has already been triggered
     already_triggered = False
 
-    def event_listener(event):
+    def state_changed_listener(entity_id, from_s, to_s):
         """Listen for state changes and calls action."""
         nonlocal already_triggered
-        template_result = _check_template(hass, value_template)
+        template_result = condition.template(hass, value_template)
 
         # Check to see if template returns true
         if template_result and not already_triggered:
             already_triggered = True
-            action()
+            action({
+                'trigger': {
+                    'platform': 'template',
+                    'entity_id': entity_id,
+                    'from_state': from_s,
+                    'to_state': to_s,
+                },
+            })
         elif not template_result:
             already_triggered = False
 
-    hass.bus.listen(EVENT_STATE_CHANGED, event_listener)
+    track_state_change(hass, MATCH_ALL, state_changed_listener)
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with state based condition."""
-    value_template = config.get(CONF_VALUE_TEMPLATE)
-
-    if value_template is None:
-        _LOGGER.error("Missing configuration key %s", CONF_VALUE_TEMPLATE)
-        return False
-
-    return lambda: _check_template(hass, value_template)
-
-
-def _check_template(hass, value_template):
-    """Check if result of template is true."""
-    try:
-        value = template.render(hass, value_template, {})
-    except TemplateError as ex:
-        if ex.args and ex.args[0].startswith(
-                "UndefinedError: 'None' has no attribute"):
-            # Common during HA startup - so just a warning
-            _LOGGER.warning(ex)
-        else:
-            _LOGGER.error(ex)
-        return False
-
-    return value.lower() == 'true'

homeassistant/components/automation/time.py

@@ -6,99 +6,48 @@ at https://home-assistant.io/components/automation/#time-trigger
 """
 import logging
 
-import homeassistant.util.dt as dt_util
+import voluptuous as vol
+
+from homeassistant.const import CONF_AFTER, CONF_PLATFORM
+from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.event import track_time_change
 
 CONF_HOURS = "hours"
 CONF_MINUTES = "minutes"
 CONF_SECONDS = "seconds"
-CONF_BEFORE = "before"
-CONF_AFTER = "after"
-CONF_WEEKDAY = "weekday"
-
-WEEKDAYS = ['mon', 'tue', 'wed', 'thu', 'fri', 'sat', 'sun']
 
 _LOGGER = logging.getLogger(__name__)
 
+TRIGGER_SCHEMA = vol.All(vol.Schema({
+    vol.Required(CONF_PLATFORM): 'time',
+    CONF_AFTER: cv.time,
+    CONF_HOURS: vol.Any(vol.Coerce(int), vol.Coerce(str)),
+    CONF_MINUTES: vol.Any(vol.Coerce(int), vol.Coerce(str)),
+    CONF_SECONDS: vol.Any(vol.Coerce(int), vol.Coerce(str)),
+}), cv.has_at_least_one_key(CONF_HOURS, CONF_MINUTES,
+                            CONF_SECONDS, CONF_AFTER))
+
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     if CONF_AFTER in config:
-        after = dt_util.parse_time_str(config[CONF_AFTER])
-        if after is None:
-            _error_time(config[CONF_AFTER], CONF_AFTER)
-            return False
+        after = config.get(CONF_AFTER)
         hours, minutes, seconds = after.hour, after.minute, after.second
-    elif (CONF_HOURS in config or CONF_MINUTES in config or
-          CONF_SECONDS in config):
+    else:
         hours = config.get(CONF_HOURS)
         minutes = config.get(CONF_MINUTES)
         seconds = config.get(CONF_SECONDS)
-    else:
-        _LOGGER.error('One of %s, %s, %s OR %s needs to be specified',
-                      CONF_HOURS, CONF_MINUTES, CONF_SECONDS, CONF_AFTER)
-        return False
 
     def time_automation_listener(now):
         """Listen for time changes and calls action."""
-        action()
+        action({
+            'trigger': {
+                'platform': 'time',
+                'now': now,
+            },
+        })
 
     track_time_change(hass, time_automation_listener,
                       hour=hours, minute=minutes, second=seconds)
 
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with time based condition."""
-    before = config.get(CONF_BEFORE)
-    after = config.get(CONF_AFTER)
-    weekday = config.get(CONF_WEEKDAY)
-
-    if before is None and after is None and weekday is None:
-        _LOGGER.error(
-            "Missing if-condition configuration key %s, %s or %s",
-            CONF_BEFORE, CONF_AFTER, CONF_WEEKDAY)
-        return None
-
-    if before is not None:
-        before = dt_util.parse_time_str(before)
-        if before is None:
-            _error_time(before, CONF_BEFORE)
-            return None
-
-    if after is not None:
-        after = dt_util.parse_time_str(after)
-        if after is None:
-            _error_time(after, CONF_AFTER)
-            return None
-
-    def time_if():
-        """Validate time based if-condition."""
-        now = dt_util.now()
-        if before is not None and now > now.replace(hour=before.hour,
-                                                    minute=before.minute):
-            return False
-
-        if after is not None and now < now.replace(hour=after.hour,
-                                                   minute=after.minute):
-            return False
-
-        if weekday is not None:
-            now_weekday = WEEKDAYS[now.weekday()]
-
-            if isinstance(weekday, str) and weekday != now_weekday or \
-               now_weekday not in weekday:
-                return False
-
-        return True
-
-    return time_if
-
-
-def _error_time(value, key):
-    """Helper method to print error."""
-    _LOGGER.error(
-        "Received invalid value for '%s': %s", key, value)
-    if isinstance(value, int):
-        _LOGGER.error('Make sure you wrap time values in quotes')

homeassistant/components/automation/zone.py

@@ -4,82 +4,61 @@ Offer zone automation rules.
 For more details about this automation rule, please refer to the documentation
 at https://home-assistant.io/components/automation/#zone-trigger
 """
-import logging
+import voluptuous as vol
 
-from homeassistant.components import zone
 from homeassistant.const import (
-    ATTR_GPS_ACCURACY, ATTR_LATITUDE, ATTR_LONGITUDE, MATCH_ALL)
+    CONF_EVENT, CONF_ENTITY_ID, CONF_ZONE, MATCH_ALL, CONF_PLATFORM)
 from homeassistant.helpers.event import track_state_change
+from homeassistant.helpers import (
+    condition, config_validation as cv, location)
 
-CONF_ENTITY_ID = "entity_id"
-CONF_ZONE = "zone"
-CONF_EVENT = "event"
 EVENT_ENTER = "enter"
 EVENT_LEAVE = "leave"
 DEFAULT_EVENT = EVENT_ENTER
 
+TRIGGER_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): 'zone',
+    vol.Required(CONF_ENTITY_ID): cv.entity_ids,
+    vol.Required(CONF_ZONE): cv.entity_id,
+    vol.Required(CONF_EVENT, default=DEFAULT_EVENT):
+        vol.Any(EVENT_ENTER, EVENT_LEAVE),
+})
+
 
 def trigger(hass, config, action):
     """Listen for state changes based on configuration."""
     entity_id = config.get(CONF_ENTITY_ID)
     zone_entity_id = config.get(CONF_ZONE)
-
-    if entity_id is None or zone_entity_id is None:
-        logging.getLogger(__name__).error(
-            "Missing trigger configuration key %s or %s", CONF_ENTITY_ID,
-            CONF_ZONE)
-        return False
-
-    event = config.get(CONF_EVENT, DEFAULT_EVENT)
+    event = config.get(CONF_EVENT)
 
     def zone_automation_listener(entity, from_s, to_s):
         """Listen for state changes and calls action."""
-        if from_s and None in (from_s.attributes.get(ATTR_LATITUDE),
-                               from_s.attributes.get(ATTR_LONGITUDE)) or \
-            None in (to_s.attributes.get(ATTR_LATITUDE),
-                     to_s.attributes.get(ATTR_LONGITUDE)):
+        if from_s and not location.has_location(from_s) or \
+           not location.has_location(to_s):
             return
 
-        from_match = _in_zone(hass, zone_entity_id, from_s) if from_s else None
-        to_match = _in_zone(hass, zone_entity_id, to_s)
+        zone_state = hass.states.get(zone_entity_id)
+        if from_s:
+            from_match = condition.zone(hass, zone_state, from_s)
+        else:
+            from_match = False
+        to_match = condition.zone(hass, zone_state, to_s)
 
         # pylint: disable=too-many-boolean-expressions
         if event == EVENT_ENTER and not from_match and to_match or \
            event == EVENT_LEAVE and from_match and not to_match:
-            action()
+            action({
+                'trigger': {
+                    'platform': 'zone',
+                    'entity_id': entity,
+                    'from_state': from_s,
+                    'to_state': to_s,
+                    'zone': zone_state,
+                    'event': event,
+                },
+            })
 
     track_state_change(
         hass, entity_id, zone_automation_listener, MATCH_ALL, MATCH_ALL)
 
     return True
-
-
-def if_action(hass, config):
-    """Wrap action method with zone based condition."""
-    entity_id = config.get(CONF_ENTITY_ID)
-    zone_entity_id = config.get(CONF_ZONE)
-
-    if entity_id is None or zone_entity_id is None:
-        logging.getLogger(__name__).error(
-            "Missing condition configuration key %s or %s", CONF_ENTITY_ID,
-            CONF_ZONE)
-        return False
-
-    def if_in_zone():
-        """Test if condition."""
-        return _in_zone(hass, zone_entity_id, hass.states.get(entity_id))
-
-    return if_in_zone
-
-
-def _in_zone(hass, zone_entity_id, state):
-    """Check if state is in zone."""
-    if not state or None in (state.attributes.get(ATTR_LATITUDE),
-                             state.attributes.get(ATTR_LONGITUDE)):
-        return False
-
-    zone_state = hass.states.get(zone_entity_id)
-    return zone_state and zone.in_zone(
-        zone_state, state.attributes.get(ATTR_LATITUDE),
-        state.attributes.get(ATTR_LONGITUDE),
-        state.attributes.get(ATTR_GPS_ACCURACY, 0))

homeassistant/components/binary_sensor/__init__.py

@@ -9,46 +9,35 @@ import logging
 from homeassistant.helpers.entity_component import EntityComponent
 from homeassistant.helpers.entity import Entity
 from homeassistant.const import (STATE_ON, STATE_OFF)
-from homeassistant.components import (
-    bloomsky, mysensors, zwave, vera, wemo, wink)
+from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
 
 DOMAIN = 'binary_sensor'
 SCAN_INTERVAL = 30
 
 ENTITY_ID_FORMAT = DOMAIN + '.{}'
 SENSOR_CLASSES = [
-    None,         # Generic on/off
-    'opening',    # Door, window, etc
-    'motion',     # Motion sensor
-    'gas',        # CO, CO2, etc
-    'smoke',      # Smoke detector
-    'moisture',   # Specifically a wetness sensor
-    'light',      # Lightness threshold
-    'power',      # Power, over-current, etc
-    'safety',     # Generic on=unsafe, off=safe
-    'heat',       # On means hot (or too hot)
-    'cold',       # On means cold (or too cold)
-    'moving',     # On means moving, Off means stopped
-    'sound',      # On means sound detected, Off means no sound
-    'vibration',  # On means vibration detected, Off means no vibration
+    None,            # Generic on/off
+    'cold',          # On means cold (or too cold)
+    'connectivity',  # On means connection present, Off = no connection
+    'gas',           # CO, CO2, etc.
+    'heat',          # On means hot (or too hot)
+    'light',         # Lightness threshold
+    'moisture',      # Specifically a wetness sensor
+    'motion',        # Motion sensor
+    'moving',        # On means moving, Off means stopped
+    'opening',       # Door, window, etc.
+    'power',         # Power, over-current, etc
+    'safety',        # Generic on=unsafe, off=safe
+    'smoke',         # Smoke detector
+    'sound',         # On means sound detected, Off means no sound
+    'vibration',     # On means vibration detected, Off means no vibration
 ]
 
-# Maps discovered services to their platforms
-DISCOVERY_PLATFORMS = {
-    bloomsky.DISCOVER_BINARY_SENSORS: 'bloomsky',
-    mysensors.DISCOVER_BINARY_SENSORS: 'mysensors',
-    zwave.DISCOVER_BINARY_SENSORS: 'zwave',
-    vera.DISCOVER_BINARY_SENSORS: 'vera',
-    wemo.DISCOVER_BINARY_SENSORS: 'wemo',
-    wink.DISCOVER_BINARY_SENSORS: 'wink'
-}
-
 
 def setup(hass, config):
     """Track states and offer events for binary sensors."""
     component = EntityComponent(
-        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL,
-        DISCOVERY_PLATFORMS)
+        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL)
 
     component.setup(config)
 

homeassistant/components/binary_sensor/arest.py

@@ -9,7 +9,8 @@ from datetime import timedelta
 
 import requests
 
-from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.binary_sensor import (BinarySensorDevice,
+                                                    SENSOR_CLASSES)
 from homeassistant.util import Throttle
 
 _LOGGER = logging.getLogger(__name__)
@@ -26,6 +27,11 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
     resource = config.get(CONF_RESOURCE)
     pin = config.get(CONF_PIN)
 
+    sensor_class = config.get('sensor_class')
+    if sensor_class not in SENSOR_CLASSES:
+        _LOGGER.warning('Unknown sensor class: %s', sensor_class)
+        sensor_class = None
+
     if None in (resource, pin):
         _LOGGER.error('Not all required config keys present: %s',
                       ', '.join((CONF_RESOURCE, CONF_PIN)))
@@ -45,21 +51,24 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
     arest = ArestData(resource, pin)
 
-    add_devices([ArestBinarySensor(arest,
-                                   resource,
-                                   config.get('name', response['name']),
-                                   pin)])
+    add_devices([ArestBinarySensor(
+        arest,
+        resource,
+        config.get('name', response['name']),
+        sensor_class,
+        pin)])
 
 
 # pylint: disable=too-many-instance-attributes, too-many-arguments
 class ArestBinarySensor(BinarySensorDevice):
     """Implement an aREST binary sensor for a pin."""
 
-    def __init__(self, arest, resource, name, pin):
+    def __init__(self, arest, resource, name, sensor_class, pin):
         """Initialize the aREST device."""
         self.arest = arest
         self._resource = resource
         self._name = name
+        self._sensor_class = sensor_class
         self._pin = pin
         self.update()
 
@@ -79,6 +88,11 @@ class ArestBinarySensor(BinarySensorDevice):
         """Return true if the binary sensor is on."""
         return bool(self.arest.data.get('state'))
 
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor."""
+        return self._sensor_class
+
     def update(self):
         """Get the latest data from aREST API."""
         self.arest.update()

homeassistant/components/binary_sensor/command_line.py

@@ -1,13 +1,14 @@
 """
-Support for custom shell commands to to retrieve values.
+Support for custom shell commands to retrieve values.
 
 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/binary_sensor.command/
+https://home-assistant.io/components/binary_sensor.command_line/
 """
 import logging
 from datetime import timedelta
 
-from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.binary_sensor import (BinarySensorDevice,
+                                                    SENSOR_CLASSES)
 from homeassistant.components.sensor.command_line import CommandSensorData
 from homeassistant.const import CONF_VALUE_TEMPLATE
 from homeassistant.helpers import template
@@ -15,6 +16,7 @@ from homeassistant.helpers import template
 _LOGGER = logging.getLogger(__name__)
 
 DEFAULT_NAME = "Binary Command Sensor"
+DEFAULT_SENSOR_CLASS = None
 DEFAULT_PAYLOAD_ON = 'ON'
 DEFAULT_PAYLOAD_OFF = 'OFF'
 
@@ -29,28 +31,35 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         _LOGGER.error('Missing required variable: "command"')
         return False
 
+    sensor_class = config.get('sensor_class')
+    if sensor_class not in SENSOR_CLASSES:
+        _LOGGER.warning('Unknown sensor class: %s', sensor_class)
+        sensor_class = DEFAULT_SENSOR_CLASS
+
     data = CommandSensorData(config.get('command'))
 
     add_devices([CommandBinarySensor(
         hass,
         data,
         config.get('name', DEFAULT_NAME),
+        sensor_class,
         config.get('payload_on', DEFAULT_PAYLOAD_ON),
         config.get('payload_off', DEFAULT_PAYLOAD_OFF),
         config.get(CONF_VALUE_TEMPLATE)
     )])
 
 
-# pylint: disable=too-many-arguments
+# pylint: disable=too-many-arguments, too-many-instance-attributes
 class CommandBinarySensor(BinarySensorDevice):
     """Represent a command line binary sensor."""
 
-    def __init__(self, hass, data, name, payload_on,
+    def __init__(self, hass, data, name, sensor_class, payload_on,
                  payload_off, value_template):
         """Initialize the Command line binary sensor."""
         self._hass = hass
         self.data = data
         self._name = name
+        self._sensor_class = sensor_class
         self._state = False
         self._payload_on = payload_on
         self._payload_off = payload_off
@@ -67,6 +76,11 @@ class CommandBinarySensor(BinarySensorDevice):
         """Return true if the binary sensor is on."""
         return self._state
 
+    @ property
+    def sensor_class(self):
+        """Return the class of the binary sensor."""
+        return self._sensor_class
+
     def update(self):
         """Get the latest data and updates the state."""
         self.data.update()

homeassistant/components/binary_sensor/enocean.py

@@ -0,0 +1,63 @@
+"""
+Support for EnOcean binary sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.enocean/
+"""
+
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components import enocean
+from homeassistant.const import CONF_NAME
+
+DEPENDENCIES = ["enocean"]
+
+CONF_ID = "id"
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Binary Sensor platform fo EnOcean."""
+    dev_id = config.get(CONF_ID, None)
+    devname = config.get(CONF_NAME, "EnOcean binary sensor")
+    add_devices([EnOceanBinarySensor(dev_id, devname)])
+
+
+class EnOceanBinarySensor(enocean.EnOceanDevice, BinarySensorDevice):
+    """Representation of EnOcean binary sensors such as wall switches."""
+
+    def __init__(self, dev_id, devname):
+        """Initialize the EnOcean binary sensor."""
+        enocean.EnOceanDevice.__init__(self)
+        self.stype = "listener"
+        self.dev_id = dev_id
+        self.which = -1
+        self.onoff = -1
+        self.devname = devname
+
+    @property
+    def name(self):
+        """The default name for the binary sensor."""
+        return self.devname
+
+    def value_changed(self, value, value2):
+        """Fire an event with the data that have changed.
+
+        This method is called when there is an incoming packet associated
+        with this platform.
+        """
+        self.update_ha_state()
+        if value2 == 0x70:
+            self.which = 0
+            self.onoff = 0
+        elif value2 == 0x50:
+            self.which = 0
+            self.onoff = 1
+        elif value2 == 0x30:
+            self.which = 1
+            self.onoff = 0
+        elif value2 == 0x10:
+            self.which = 1
+            self.onoff = 1
+        self.hass.bus.fire('button_pressed', {"id": self.dev_id,
+                                              'pushed': value,
+                                              'which': self.which,
+                                              'onoff': self.onoff})

homeassistant/components/binary_sensor/envisalink.py

@@ -0,0 +1,71 @@
+"""
+Support for Envisalink zone states- represented as binary sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.envisalink/
+"""
+import logging
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.envisalink import (EVL_CONTROLLER,
+                                                 ZONE_SCHEMA,
+                                                 CONF_ZONENAME,
+                                                 CONF_ZONETYPE,
+                                                 EnvisalinkDevice,
+                                                 SIGNAL_ZONE_UPDATE)
+from homeassistant.const import ATTR_LAST_TRIP_TIME
+
+DEPENDENCIES = ['envisalink']
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """Setup Envisalink binary sensor devices."""
+    _configured_zones = discovery_info['zones']
+    for zone_num in _configured_zones:
+        _device_config_data = ZONE_SCHEMA(_configured_zones[zone_num])
+        _device = EnvisalinkBinarySensor(
+            zone_num,
+            _device_config_data[CONF_ZONENAME],
+            _device_config_data[CONF_ZONETYPE],
+            EVL_CONTROLLER.alarm_state['zone'][zone_num],
+            EVL_CONTROLLER)
+        add_devices_callback([_device])
+
+
+class EnvisalinkBinarySensor(EnvisalinkDevice, BinarySensorDevice):
+    """Representation of an Envisalink binary sensor."""
+
+    # pylint: disable=too-many-arguments
+    def __init__(self, zone_number, zone_name, zone_type, info, controller):
+        """Initialize the binary_sensor."""
+        from pydispatch import dispatcher
+        self._zone_type = zone_type
+        self._zone_number = zone_number
+
+        _LOGGER.debug('Setting up zone: ' + zone_name)
+        EnvisalinkDevice.__init__(self, zone_name, info, controller)
+        dispatcher.connect(self._update_callback,
+                           signal=SIGNAL_ZONE_UPDATE,
+                           sender=dispatcher.Any)
+
+    @property
+    def device_state_attributes(self):
+        """Return the state attributes."""
+        attr = {}
+        attr[ATTR_LAST_TRIP_TIME] = self._info['last_fault']
+        return attr
+
+    @property
+    def is_on(self):
+        """Return true if sensor is on."""
+        return self._info['status']['open']
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        return self._zone_type
+
+    def _update_callback(self, zone):
+        """Update the zone's state, if needed."""
+        if zone is None or int(zone) == self._zone_number:
+            self.update_ha_state()

homeassistant/components/binary_sensor/homematic.py

@@ -0,0 +1,100 @@
+"""
+Support for Homematic binary sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.homematic/
+"""
+import logging
+from homeassistant.const import STATE_UNKNOWN
+from homeassistant.components.binary_sensor import BinarySensorDevice
+import homeassistant.components.homematic as homematic
+
+_LOGGER = logging.getLogger(__name__)
+
+DEPENDENCIES = ['homematic']
+
+SENSOR_TYPES_CLASS = {
+    "Remote": None,
+    "ShutterContact": "opening",
+    "Smoke": "smoke",
+    "SmokeV2": "smoke",
+    "Motion": "motion",
+    "MotionV2": "motion",
+    "RemoteMotion": None
+}
+
+
+def setup_platform(hass, config, add_callback_devices, discovery_info=None):
+    """Setup the Homematic binary sensor platform."""
+    if discovery_info is None:
+        return
+
+    return homematic.setup_hmdevice_discovery_helper(HMBinarySensor,
+                                                     discovery_info,
+                                                     add_callback_devices)
+
+
+class HMBinarySensor(homematic.HMDevice, BinarySensorDevice):
+    """Representation of a binary Homematic device."""
+
+    @property
+    def is_on(self):
+        """Return true if switch is on."""
+        if not self.available:
+            return False
+        return bool(self._hm_get_state())
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        if not self.available:
+            return None
+
+        # If state is MOTION (RemoteMotion works only)
+        if self._state == "MOTION":
+            return "motion"
+        return SENSOR_TYPES_CLASS.get(self._hmdevice.__class__.__name__, None)
+
+    def _check_hm_to_ha_object(self):
+        """Check if possible to use the HM Object as this HA type."""
+        from pyhomematic.devicetypes.sensors import HMBinarySensor\
+            as pyHMBinarySensor
+
+        # Check compatibility from HMDevice
+        if not super()._check_hm_to_ha_object():
+            return False
+
+        # check if the Homematic device correct for this HA device
+        if not isinstance(self._hmdevice, pyHMBinarySensor):
+            _LOGGER.critical("This %s can't be use as binary", self._name)
+            return False
+
+        # if exists user value?
+        if self._state and self._state not in self._hmdevice.BINARYNODE:
+            _LOGGER.critical("This %s have no binary with %s", self._name,
+                             self._state)
+            return False
+
+        # only check and give a warning to the user
+        if self._state is None and len(self._hmdevice.BINARYNODE) > 1:
+            _LOGGER.critical("%s have multiple binary params. It use all "
+                             "binary nodes as one. Possible param values: %s",
+                             self._name, str(self._hmdevice.BINARYNODE))
+            return False
+
+        return True
+
+    def _init_data_struct(self):
+        """Generate a data struct (self._data) from the Homematic metadata."""
+        super()._init_data_struct()
+
+        # object have 1 binary
+        if self._state is None and len(self._hmdevice.BINARYNODE) == 1:
+            for value in self._hmdevice.BINARYNODE:
+                self._state = value
+
+        # add state to data struct
+        if self._state:
+            _LOGGER.debug("%s init datastruct with main node '%s'", self._name,
+                          self._state)
+            self._data.update({self._state: STATE_UNKNOWN})

homeassistant/components/binary_sensor/knx.py

@@ -0,0 +1,24 @@
+"""
+Contains functionality to use a KNX group address as a binary.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.knx/
+"""
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.knx import (
+    KNXConfig, KNXGroupAddress)
+
+DEPENDENCIES = ["knx"]
+
+
+def setup_platform(hass, config, add_entities, discovery_info=None):
+    """Setup the KNX binary sensor platform."""
+    add_entities([
+        KNXSwitch(hass, KNXConfig(config))
+    ])
+
+
+class KNXSwitch(KNXGroupAddress, BinarySensorDevice):
+    """Representation of a KNX binary sensor device."""
+
+    pass

homeassistant/components/binary_sensor/mqtt.py

@@ -6,43 +6,50 @@ https://home-assistant.io/components/binary_sensor.mqtt/
 """
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.mqtt as mqtt
 from homeassistant.components.binary_sensor import (BinarySensorDevice,
                                                     SENSOR_CLASSES)
-from homeassistant.const import CONF_VALUE_TEMPLATE
+from homeassistant.const import CONF_NAME, CONF_VALUE_TEMPLATE
+from homeassistant.components.mqtt import CONF_STATE_TOPIC, CONF_QOS
 from homeassistant.helpers import template
+import homeassistant.helpers.config_validation as cv
 
 _LOGGER = logging.getLogger(__name__)
 
+DEPENDENCIES = ['mqtt']
+
+CONF_SENSOR_CLASS = 'sensor_class'
+CONF_PAYLOAD_ON = 'payload_on'
+CONF_PAYLOAD_OFF = 'payload_off'
+
 DEFAULT_NAME = 'MQTT Binary sensor'
-DEFAULT_QOS = 0
 DEFAULT_PAYLOAD_ON = 'ON'
 DEFAULT_PAYLOAD_OFF = 'OFF'
 
-DEPENDENCIES = ['mqtt']
+PLATFORM_SCHEMA = mqtt.MQTT_RO_PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_SENSOR_CLASS, default=None):
+        vol.Any(vol.In(SENSOR_CLASSES), vol.SetTo(None)),
+    vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON): cv.string,
+    vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF): cv.string,
+})
 
 
 # pylint: disable=unused-argument
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Add MQTT binary sensor."""
-    if config.get('state_topic') is None:
-        _LOGGER.error('Missing required variable: state_topic')
-        return False
-
-    sensor_class = config.get('sensor_class')
-    if sensor_class not in SENSOR_CLASSES:
-        _LOGGER.warning('Unknown sensor class: %s', sensor_class)
-        sensor_class = None
-
     add_devices([MqttBinarySensor(
         hass,
-        config.get('name', DEFAULT_NAME),
-        config.get('state_topic', None),
-        sensor_class,
-        config.get('qos', DEFAULT_QOS),
-        config.get('payload_on', DEFAULT_PAYLOAD_ON),
-        config.get('payload_off', DEFAULT_PAYLOAD_OFF),
-        config.get(CONF_VALUE_TEMPLATE))])
+        config[CONF_NAME],
+        config[CONF_STATE_TOPIC],
+        config[CONF_SENSOR_CLASS],
+        config[CONF_QOS],
+        config[CONF_PAYLOAD_ON],
+        config[CONF_PAYLOAD_OFF],
+        config.get(CONF_VALUE_TEMPLATE)
+    )])
 
 
 # pylint: disable=too-many-arguments, too-many-instance-attributes

homeassistant/components/binary_sensor/mysensors.py

@@ -6,11 +6,10 @@ https://home-assistant.io/components/binary_sensor.mysensors/
 """
 import logging
 
-from homeassistant.const import (
-    ATTR_BATTERY_LEVEL, STATE_OFF, STATE_ON)
-from homeassistant.components.binary_sensor import (
-    BinarySensorDevice, SENSOR_CLASSES)
-from homeassistant.loader import get_component
+from homeassistant.components import mysensors
+from homeassistant.components.binary_sensor import (SENSOR_CLASSES,
+                                                    BinarySensorDevice)
+from homeassistant.const import STATE_ON
 
 _LOGGER = logging.getLogger(__name__)
 DEPENDENCIES = []
@@ -23,8 +22,6 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
     if discovery_info is None:
         return
 
-    mysensors = get_component('mysensors')
-
     for gateway in mysensors.GATEWAYS.values():
         # Define the S_TYPES and V_TYPES that the platform should handle as
         # states. Map them in a dict of lists.
@@ -49,76 +46,9 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
             map_sv_types, devices, add_devices, MySensorsBinarySensor))
 
 
-class MySensorsBinarySensor(BinarySensorDevice):
-    """Represent the value of a MySensors child node."""
-
-    # pylint: disable=too-many-arguments,too-many-instance-attributes
-
-    def __init__(
-            self, gateway, node_id, child_id, name, value_type, child_type):
-        """
-        Setup class attributes on instantiation.
-
-        Args:
-        gateway (GatewayWrapper): Gateway object.
-        node_id (str): Id of node.
-        child_id (str): Id of child.
-        name (str): Entity name.
-        value_type (str): Value type of child. Value is entity state.
-        child_type (str): Child type of child.
-
-        Attributes:
-        gateway (GatewayWrapper): Gateway object.
-        node_id (str): Id of node.
-        child_id (str): Id of child.
-        _name (str): Entity name.
-        value_type (str): Value type of child. Value is entity state.
-        child_type (str): Child type of child.
-        battery_level (int): Node battery level.
-        _values (dict): Child values. Non state values set as state attributes.
-        mysensors (module): Mysensors main component module.
-        """
-        self.gateway = gateway
-        self.node_id = node_id
-        self.child_id = child_id
-        self._name = name
-        self.value_type = value_type
-        self.child_type = child_type
-        self.battery_level = 0
-        self._values = {}
-        self.mysensors = get_component('mysensors')
-
-    @property
-    def should_poll(self):
-        """Mysensor gateway pushes its state to HA."""
-        return False
-
-    @property
-    def name(self):
-        """The name of this entity."""
-        return self._name
-
-    @property
-    def device_state_attributes(self):
-        """Return device specific state attributes."""
-        attr = {
-            self.mysensors.ATTR_PORT: self.gateway.port,
-            self.mysensors.ATTR_NODE_ID: self.node_id,
-            self.mysensors.ATTR_CHILD_ID: self.child_id,
-            ATTR_BATTERY_LEVEL: self.battery_level,
-        }
-
-        set_req = self.gateway.const.SetReq
-
-        for value_type, value in self._values.items():
-            if value_type != self.value_type:
-                try:
-                    attr[set_req(value_type).name] = value
-                except ValueError:
-                    _LOGGER.error('value_type %s is not valid for mysensors '
-                                  'version %s', value_type,
-                                  self.gateway.version)
-        return attr
+class MySensorsBinarySensor(
+        mysensors.MySensorsDeviceEntity, BinarySensorDevice):
+    """Represent the value of a MySensors Binary Sensor child node."""
 
     @property
     def is_on(self):
@@ -146,23 +76,3 @@ class MySensorsBinarySensor(BinarySensorDevice):
             })
         if class_map.get(self.child_type) in SENSOR_CLASSES:
             return class_map.get(self.child_type)
-
-    @property
-    def available(self):
-        """Return True if entity is available."""
-        return self.value_type in self._values
-
-    def update(self):
-        """Update the controller with the latest values from a sensor."""
-        node = self.gateway.sensors[self.node_id]
-        child = node.children[self.child_id]
-        for value_type, value in child.values.items():
-            _LOGGER.debug(
-                "%s: value_type %s, value = %s", self._name, value_type, value)
-            if value_type == self.gateway.const.SetReq.V_TRIPPED:
-                self._values[value_type] = STATE_ON if int(
-                    value) == 1 else STATE_OFF
-            else:
-                self._values[value_type] = value
-
-        self.battery_level = node.battery_level

homeassistant/components/binary_sensor/nest.py

@@ -4,12 +4,14 @@ Support for Nest Thermostat Binary Sensors.
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/binary_sensor.nest/
 """
-import logging
-import socket
+import voluptuous as vol
 
 import homeassistant.components.nest as nest
 from homeassistant.components.binary_sensor import BinarySensorDevice
 from homeassistant.components.sensor.nest import NestSensor
+from homeassistant.const import (
+    CONF_PLATFORM, CONF_SCAN_INTERVAL, CONF_MONITORED_CONDITIONS
+)
 
 DEPENDENCIES = ['nest']
 BINARY_TYPES = ['fan',
@@ -23,25 +25,19 @@ BINARY_TYPES = ['fan',
                 'hvac_emer_heat_state',
                 'online']
 
+PLATFORM_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): nest.DOMAIN,
+    vol.Optional(CONF_SCAN_INTERVAL):
+        vol.All(vol.Coerce(int), vol.Range(min=1)),
+    vol.Required(CONF_MONITORED_CONDITIONS): [vol.In(BINARY_TYPES)],
+})
+
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
     """Setup Nest binary sensors."""
-    logger = logging.getLogger(__name__)
-    try:
-        for structure in nest.NEST.structures:
-            for device in structure.devices:
-                for variable in config['monitored_conditions']:
-                    if variable in BINARY_TYPES:
-                        add_devices([NestBinarySensor(structure,
-                                                      device,
-                                                      variable)])
-                    else:
-                        logger.error('Nest sensor type: "%s" does not exist',
-                                     variable)
-    except socket.error:
-        logger.error(
-            "Connection error logging into the nest web service."
-        )
+    for structure, device in nest.devices():
+        add_devices([NestBinarySensor(structure, device, variable)
+                     for variable in config[CONF_MONITORED_CONDITIONS]])
 
 
 class NestBinarySensor(NestSensor, BinarySensorDevice):

homeassistant/components/binary_sensor/nx584.py

@@ -18,7 +18,7 @@ _LOGGER = logging.getLogger(__name__)
 
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Setup nx584 sensors."""
+    """Setup nx584 binary sensor platform."""
     from nx584 import client as nx584_client
 
     host = config.get('host', 'localhost:5007')

homeassistant/components/binary_sensor/octoprint.py

@@ -0,0 +1,109 @@
+"""
+Support for monitoring OctoPrint binary sensors.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.octoprint/
+"""
+import logging
+import requests
+
+from homeassistant.const import CONF_NAME, STATE_ON, STATE_OFF
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.loader import get_component
+
+DEPENDENCIES = ["octoprint"]
+
+SENSOR_TYPES = {
+    # API Endpoint, Group, Key, unit
+    "Printing": ["printer", "state", "printing", None],
+    "Printing Error": ["printer", "state", "error", None]
+}
+
+_LOGGER = logging.getLogger(__name__)
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the available OctoPrint binary sensors."""
+    octoprint = get_component('octoprint')
+    name = config.get(CONF_NAME, "OctoPrint")
+    monitored_conditions = config.get("monitored_conditions",
+                                      SENSOR_TYPES.keys())
+
+    devices = []
+    for octo_type in monitored_conditions:
+        if octo_type in SENSOR_TYPES:
+            new_sensor = OctoPrintBinarySensor(octoprint.OCTOPRINT,
+                                               octo_type,
+                                               SENSOR_TYPES[octo_type][2],
+                                               name,
+                                               SENSOR_TYPES[octo_type][3],
+                                               SENSOR_TYPES[octo_type][0],
+                                               SENSOR_TYPES[octo_type][1],
+                                               "flags")
+            devices.append(new_sensor)
+        else:
+            _LOGGER.error("Unknown OctoPrint sensor type: %s", octo_type)
+    add_devices(devices)
+
+
+# pylint: disable=too-many-instance-attributes
+class OctoPrintBinarySensor(BinarySensorDevice):
+    """Representation an OctoPrint binary sensor."""
+
+    # pylint: disable=too-many-arguments
+    def __init__(self, api, condition, sensor_type, sensor_name,
+                 unit, endpoint, group, tool=None):
+        """Initialize a new OctoPrint sensor."""
+        self.sensor_name = sensor_name
+        if tool is None:
+            self._name = sensor_name + ' ' + condition
+        else:
+            self._name = sensor_name + ' ' + condition
+        self.sensor_type = sensor_type
+        self.api = api
+        self._state = False
+        self._unit_of_measurement = unit
+        self.api_endpoint = endpoint
+        self.api_group = group
+        self.api_tool = tool
+        # Set initial state
+        self.update()
+        _LOGGER.debug("Created OctoPrint binary sensor %r", self)
+
+    @property
+    def name(self):
+        """Return the name of the sensor."""
+        return self._name
+
+    @property
+    def state(self):
+        """Return the state of the sensor."""
+        return self.is_on
+
+    @property
+    def is_on(self):
+        """Return true if binary sensor is on."""
+        if self._state:
+            return STATE_ON
+        else:
+            return STATE_OFF
+
+    @property
+    def sensor_class(self):
+        """Return the class of this sensor, from SENSOR_CLASSES."""
+        return None
+
+    def update(self):
+        """Update state of sensor."""
+        try:
+            self._state = self.api.update(self.sensor_type,
+                                          self.api_endpoint,
+                                          self.api_group,
+                                          self.api_tool)
+        except requests.exceptions.ConnectionError:
+            # Error calling the api, already logged in api.update()
+            return
+
+        if self._state is None:
+            _LOGGER.warning("Unable to locate value for %s", self.sensor_type)

homeassistant/components/binary_sensor/rest.py

@@ -35,7 +35,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
     rest.update()
 
     if rest.data is None:
-        _LOGGER.error('Unable to fetch Rest data')
+        _LOGGER.error('Unable to fetch REST data')
         return False
 
     add_devices([RestBinarySensor(
@@ -57,6 +57,7 @@ class RestBinarySensor(BinarySensorDevice):
         self._name = name
         self._sensor_class = sensor_class
         self._state = False
+        self._previous_data = None
         self._value_template = value_template
         self.update()
 
@@ -77,9 +78,14 @@ class RestBinarySensor(BinarySensorDevice):
             return False
 
         if self._value_template is not None:
-            self.rest.data = template.render_with_possible_json_value(
+            response = template.render_with_possible_json_value(
                 self._hass, self._value_template, self.rest.data, False)
-        return bool(int(self.rest.data))
+
+        try:
+            return bool(int(response))
+        except ValueError:
+            return {"true": True, "on": True, "open": True,
+                    "yes": True}.get(response.lower(), False)
 
     def update(self):
         """Get the latest data from REST API and updates the state."""

homeassistant/components/binary_sensor/tcp.py

@@ -7,9 +7,9 @@ https://home-assistant.io/components/binary_sensor.tcp/
 import logging
 
 from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.components.sensor.tcp import Sensor, DOMAIN, CONF_VALUE_ON
+from homeassistant.components.sensor.tcp import Sensor, CONF_VALUE_ON
+
 
-DEPENDENCIES = [DOMAIN]
 _LOGGER = logging.getLogger(__name__)
 
 

homeassistant/components/binary_sensor/template.py

@@ -9,11 +9,12 @@ import logging
 from homeassistant.components.binary_sensor import (BinarySensorDevice,
                                                     ENTITY_ID_FORMAT,
                                                     SENSOR_CLASSES)
-from homeassistant.const import ATTR_FRIENDLY_NAME, CONF_VALUE_TEMPLATE
-from homeassistant.core import EVENT_STATE_CHANGED
+from homeassistant.const import (ATTR_FRIENDLY_NAME, CONF_VALUE_TEMPLATE,
+                                 ATTR_ENTITY_ID, MATCH_ALL)
 from homeassistant.exceptions import TemplateError
 from homeassistant.helpers.entity import generate_entity_id
 from homeassistant.helpers import template
+from homeassistant.helpers.event import track_state_change
 from homeassistant.util import slugify
 
 CONF_SENSORS = 'sensors'
@@ -52,13 +53,16 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
                 'Missing %s for sensor %s', CONF_VALUE_TEMPLATE, device)
             continue
 
+        entity_ids = device_config.get(ATTR_ENTITY_ID, MATCH_ALL)
+
         sensors.append(
             BinarySensorTemplate(
                 hass,
                 device,
                 friendly_name,
                 sensor_class,
-                value_template)
+                value_template,
+                entity_ids)
             )
     if not sensors:
         _LOGGER.error('No sensors added')
@@ -73,7 +77,7 @@ class BinarySensorTemplate(BinarySensorDevice):
 
     # pylint: disable=too-many-arguments
     def __init__(self, hass, device, friendly_name, sensor_class,
-                 value_template):
+                 value_template, entity_ids):
         """Initialize the Template binary sensor."""
         self.hass = hass
         self.entity_id = generate_entity_id(ENTITY_ID_FORMAT, device,
@@ -85,12 +89,12 @@ class BinarySensorTemplate(BinarySensorDevice):
 
         self.update()
 
-        def template_bsensor_event_listener(event):
+        def template_bsensor_state_listener(entity, old_state, new_state):
             """Called when the target device changes state."""
             self.update_ha_state(True)
 
-        hass.bus.listen(EVENT_STATE_CHANGED,
-                        template_bsensor_event_listener)
+        track_state_change(hass, entity_ids,
+                           template_bsensor_state_listener)
 
     @property
     def name(self):

homeassistant/components/binary_sensor/vera.py

@@ -6,9 +6,6 @@ https://home-assistant.io/components/binary_sensor.vera/
 """
 import logging
 
-import homeassistant.util.dt as dt_util
-from homeassistant.const import (
-    ATTR_ARMED, ATTR_BATTERY_LEVEL, ATTR_LAST_TRIP_TIME, ATTR_TRIPPED)
 from homeassistant.components.binary_sensor import (
     BinarySensorDevice)
 from homeassistant.components.vera import (
@@ -34,31 +31,6 @@ class VeraBinarySensor(VeraDevice, BinarySensorDevice):
         self._state = False
         VeraDevice.__init__(self, vera_device, controller)
 
-    @property
-    def device_state_attributes(self):
-        """Return the state attributes."""
-        attr = {}
-        if self.vera_device.has_battery:
-            attr[ATTR_BATTERY_LEVEL] = self.vera_device.battery_level + '%'
-
-        if self.vera_device.is_armable:
-            armed = self.vera_device.is_armed
-            attr[ATTR_ARMED] = 'True' if armed else 'False'
-
-        if self.vera_device.is_trippable:
-            last_tripped = self.vera_device.last_trip
-            if last_tripped is not None:
-                utc_time = dt_util.utc_from_timestamp(int(last_tripped))
-                attr[ATTR_LAST_TRIP_TIME] = dt_util.datetime_to_str(
-                    utc_time)
-            else:
-                attr[ATTR_LAST_TRIP_TIME] = None
-            tripped = self.vera_device.is_tripped
-            attr[ATTR_TRIPPED] = 'True' if tripped else 'False'
-
-        attr['Vera Device Id'] = self.vera_device.vera_device_id
-        return attr
-
     @property
     def is_on(self):
         """Return true if sensor is on."""

homeassistant/components/binary_sensor/wink.py

@@ -5,24 +5,28 @@ For more details about this platform, please refer to the documentation at
 at https://home-assistant.io/components/sensor.wink/
 """
 import logging
+import json
 
 from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.sensor.wink import WinkDevice
 from homeassistant.const import CONF_ACCESS_TOKEN
 from homeassistant.helpers.entity import Entity
+from homeassistant.loader import get_component
 
-REQUIREMENTS = ['python-wink==0.6.4']
+REQUIREMENTS = ['python-wink==0.7.11', 'pubnub==3.8.2']
 
 # These are the available sensors mapped to binary_sensor class
 SENSOR_TYPES = {
     "opened": "opening",
     "brightness": "light",
     "vibration": "vibration",
-    "loudness": "sound"
+    "loudness": "sound",
+    "liquid_detected": "moisture"
 }
 
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Setup the Wink platform."""
+    """Setup the Wink binary sensor platform."""
     import pywink
 
     if discovery_info is None:
@@ -40,16 +44,28 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         if sensor.capability() in SENSOR_TYPES:
             add_devices([WinkBinarySensorDevice(sensor)])
 
+    for key in pywink.get_keys():
+        add_devices([WinkBinarySensorDevice(key)])
 
-class WinkBinarySensorDevice(BinarySensorDevice, Entity):
-    """Representation of a Wink sensor."""
+
+class WinkBinarySensorDevice(WinkDevice, BinarySensorDevice, Entity):
+    """Representation of a Wink binary sensor."""
 
     def __init__(self, wink):
         """Initialize the Wink binary sensor."""
-        self.wink = wink
+        super().__init__(wink)
+        wink = get_component('wink')
         self._unit_of_measurement = self.wink.UNIT
         self.capability = self.wink.capability()
 
+    def _pubnub_update(self, message, channel):
+        if 'data' in message:
+            json_data = json.dumps(message.get('data'))
+        else:
+            json_data = message
+        self.wink.pubnub_update(json.loads(json_data))
+        self.update_ha_state()
+
     @property
     def is_on(self):
         """Return true if the binary sensor is on."""
@@ -59,6 +75,8 @@ class WinkBinarySensorDevice(BinarySensorDevice, Entity):
             return self.wink.vibration_boolean()
         elif self.capability == "brightness":
             return self.wink.brightness_boolean()
+        elif self.capability == "liquid_detected":
+            return self.wink.liquid_boolean()
         else:
             return self.wink.state()
 
@@ -66,22 +84,3 @@ class WinkBinarySensorDevice(BinarySensorDevice, Entity):
     def sensor_class(self):
         """Return the class of this sensor, from SENSOR_CLASSES."""
         return SENSOR_TYPES.get(self.capability)
-
-    @property
-    def unique_id(self):
-        """Return the ID of this wink sensor."""
-        return "{}.{}".format(self.__class__, self.wink.device_id())
-
-    @property
-    def name(self):
-        """Return the name of the sensor if any."""
-        return self.wink.name()
-
-    @property
-    def available(self):
-        """True if connection == True."""
-        return self.wink.available
-
-    def update(self):
-        """Update state of the sensor."""
-        self.wink.update_state()

homeassistant/components/binary_sensor/zigbee.py

@@ -12,7 +12,7 @@ DEPENDENCIES = ["zigbee"]
 
 
 def setup_platform(hass, config, add_entities, discovery_info=None):
-    """Create and add an entity based on the configuration."""
+    """Setup the ZigBee binary sensor platform."""
     add_entities([
         ZigBeeBinarySensor(hass, ZigBeeDigitalInConfig(config))
     ])

homeassistant/components/binary_sensor/zwave.py

@@ -8,11 +8,8 @@ import logging
 import datetime
 import homeassistant.util.dt as dt_util
 from homeassistant.helpers.event import track_point_in_time
-
-from homeassistant.components.zwave import (
-    ATTR_NODE_ID, ATTR_VALUE_ID,
-    COMMAND_CLASS_SENSOR_BINARY, NETWORK,
-    ZWaveDeviceEntity, get_config_value)
+from homeassistant.helpers.entity import Entity
+from homeassistant.components import zwave
 from homeassistant.components.binary_sensor import (
     DOMAIN,
     BinarySensorDevice)
@@ -35,12 +32,12 @@ DEVICE_MAPPINGS = {
 
 
 def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Setup the Z-Wave platform for sensors."""
-    if discovery_info is None or NETWORK is None:
+    """Setup the Z-Wave platform for binary sensors."""
+    if discovery_info is None or zwave.NETWORK is None:
         return
 
-    node = NETWORK.nodes[discovery_info[ATTR_NODE_ID]]
-    value = node.values[discovery_info[ATTR_VALUE_ID]]
+    node = zwave.NETWORK.nodes[discovery_info[zwave.ATTR_NODE_ID]]
+    value = node.values[discovery_info[zwave.ATTR_VALUE_ID]]
     value.set_change_verified(False)
 
     # Make sure that we have values for the key before converting to int
@@ -53,18 +50,19 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         if specific_sensor_key in DEVICE_MAPPINGS:
             if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
                 # Default the multiplier to 4
-                re_arm_multiplier = (get_config_value(value.node, 9) or 4)
+                re_arm_multiplier = (zwave.get_config_value(value.node,
+                                                            9) or 4)
                 add_devices([
                     ZWaveTriggerSensor(value, "motion",
                                        hass, re_arm_multiplier * 8)
                 ])
                 return
 
-    if value.command_class == COMMAND_CLASS_SENSOR_BINARY:
+    if value.command_class == zwave.COMMAND_CLASS_SENSOR_BINARY:
         add_devices([ZWaveBinarySensor(value, None)])
 
 
-class ZWaveBinarySensor(BinarySensorDevice, ZWaveDeviceEntity):
+class ZWaveBinarySensor(BinarySensorDevice, zwave.ZWaveDeviceEntity, Entity):
     """Representation of a binary sensor within Z-Wave."""
 
     def __init__(self, value, sensor_class):
@@ -74,7 +72,7 @@ class ZWaveBinarySensor(BinarySensorDevice, ZWaveDeviceEntity):
         from openzwave.network import ZWaveNetwork
         from pydispatch import dispatcher
 
-        ZWaveDeviceEntity.__init__(self, value, DOMAIN)
+        zwave.ZWaveDeviceEntity.__init__(self, value, DOMAIN)
 
         dispatcher.connect(
             self.value_changed, ZWaveNetwork.SIGNAL_VALUE_CHANGED)
@@ -96,11 +94,12 @@ class ZWaveBinarySensor(BinarySensorDevice, ZWaveDeviceEntity):
 
     def value_changed(self, value):
         """Called when a value has changed on the network."""
-        if self._value.value_id == value.value_id:
+        if self._value.value_id == value.value_id or \
+           self._value.node == value.node:
             self.update_ha_state()
 
 
-class ZWaveTriggerSensor(ZWaveBinarySensor):
+class ZWaveTriggerSensor(ZWaveBinarySensor, Entity):
     """Representation of a stateless sensor within Z-Wave."""
 
     def __init__(self, sensor_value, sensor_class, hass, re_arm_sec=60):

homeassistant/components/bloomsky.py

@@ -9,9 +9,8 @@ from datetime import timedelta
 
 import requests
 
-from homeassistant.components import discovery
 from homeassistant.const import CONF_API_KEY
-from homeassistant.helpers import validate_config
+from homeassistant.helpers import validate_config, discovery
 from homeassistant.util import Throttle
 
 DOMAIN = "bloomsky"
@@ -23,10 +22,6 @@ _LOGGER = logging.getLogger(__name__)
 # no point in polling the API more frequently
 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=300)
 
-DISCOVER_SENSORS = 'bloomsky.sensors'
-DISCOVER_BINARY_SENSORS = 'bloomsky.binary_sensor'
-DISCOVER_CAMERAS = 'bloomsky.camera'
-
 
 # pylint: disable=unused-argument,too-few-public-methods
 def setup(hass, config):
@@ -45,11 +40,8 @@ def setup(hass, config):
     except RuntimeError:
         return False
 
-    for component, discovery_service in (
-            ('camera', DISCOVER_CAMERAS), ('sensor', DISCOVER_SENSORS),
-            ('binary_sensor', DISCOVER_BINARY_SENSORS)):
-        discovery.discover(hass, discovery_service, component=component,
-                           hass_config=config)
+    for component in 'camera', 'binary_sensor', 'sensor':
+        discovery.load_platform(hass, component, DOMAIN, {}, config)
 
     return True
 

homeassistant/components/browser.py

@@ -4,10 +4,19 @@ Provides functionality to launch a web browser on the host machine.
 For more details about this component, please refer to the documentation at
 https://home-assistant.io/components/browser/
 """
+import voluptuous as vol
 
 DOMAIN = "browser"
 SERVICE_BROWSE_URL = "browse_url"
 
+ATTR_URL = 'url'
+ATTR_URL_DEFAULT = 'https://www.google.com'
+
+SERVICE_BROWSE_URL_SCHEMA = vol.Schema({
+    # pylint: disable=no-value-for-parameter
+    vol.Required(ATTR_URL, default=ATTR_URL_DEFAULT): vol.Url(),
+})
+
 
 def setup(hass, config):
     """Listen for browse_url events."""
@@ -15,8 +24,7 @@ def setup(hass, config):
 
     hass.services.register(DOMAIN, SERVICE_BROWSE_URL,
                            lambda service:
-                           webbrowser.open(
-                               service.data.get(
-                                   'url', 'https://www.google.com')))
+                           webbrowser.open(service.data[ATTR_URL]),
+                           schema=SERVICE_BROWSE_URL_SCHEMA)
 
     return True

homeassistant/components/camera/__init__.py

@@ -6,116 +6,36 @@ For more details about this component, please refer to the documentation at
 https://home-assistant.io/components/camera/
 """
 import logging
-import re
 import time
 
-import requests
-
 from homeassistant.helpers.entity import Entity
 from homeassistant.helpers.entity_component import EntityComponent
-from homeassistant.components import bloomsky
-from homeassistant.const import (
-    HTTP_NOT_FOUND,
-    ATTR_ENTITY_ID,
-    )
-
+from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
+from homeassistant.components.http import HomeAssistantView
 
 DOMAIN = 'camera'
 DEPENDENCIES = ['http']
 SCAN_INTERVAL = 30
 ENTITY_ID_FORMAT = DOMAIN + '.{}'
 
-# Maps discovered services to their platforms
-DISCOVERY_PLATFORMS = {
-    bloomsky.DISCOVER_CAMERAS: 'bloomsky',
-}
-
 STATE_RECORDING = 'recording'
 STATE_STREAMING = 'streaming'
 STATE_IDLE = 'idle'
 
-ENTITY_IMAGE_URL = '/api/camera_proxy/{0}'
-
-MULTIPART_BOUNDARY = '--jpegboundary'
-MJPEG_START_HEADER = 'Content-type: {0}\r\n\r\n'
+ENTITY_IMAGE_URL = '/api/camera_proxy/{0}?token={1}'
 
 
 # pylint: disable=too-many-branches
 def setup(hass, config):
     """Setup the camera component."""
     component = EntityComponent(
-        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL,
-        DISCOVERY_PLATFORMS)
+        logging.getLogger(__name__), DOMAIN, hass, SCAN_INTERVAL)
+
+    hass.wsgi.register_view(CameraImageView(hass, component.entities))
+    hass.wsgi.register_view(CameraMjpegStream(hass, component.entities))
 
     component.setup(config)
 
-    # -------------------------------------------------------------------------
-    # CAMERA COMPONENT ENDPOINTS
-    # -------------------------------------------------------------------------
-    # The following defines the endpoints for serving images from the camera
-    # via the HA http server.  This is means that you can access images from
-    # your camera outside of your LAN without the need for port forwards etc.
-
-    # Because the authentication header can't be added in image requests these
-    # endpoints are secured with session based security.
-
-    # pylint: disable=unused-argument
-    def _proxy_camera_image(handler, path_match, data):
-        """Serve the camera image via the HA server."""
-        entity_id = path_match.group(ATTR_ENTITY_ID)
-        camera = component.entities.get(entity_id)
-
-        if camera is None:
-            handler.send_response(HTTP_NOT_FOUND)
-            handler.end_headers()
-            return
-
-        response = camera.camera_image()
-
-        if response is None:
-            handler.send_response(HTTP_NOT_FOUND)
-            handler.end_headers()
-            return
-
-        handler.wfile.write(response)
-
-    hass.http.register_path(
-        'GET',
-        re.compile(r'/api/camera_proxy/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _proxy_camera_image)
-
-    # pylint: disable=unused-argument
-    def _proxy_camera_mjpeg_stream(handler, path_match, data):
-        """
-        Proxy the camera image as an mjpeg stream via the HA server.
-
-        This function takes still images from the IP camera and turns them
-        into an MJPEG stream.  This means that HA can return a live video
-        stream even with only a still image URL available.
-        """
-        entity_id = path_match.group(ATTR_ENTITY_ID)
-        camera = component.entities.get(entity_id)
-
-        if camera is None:
-            handler.send_response(HTTP_NOT_FOUND)
-            handler.end_headers()
-            return
-
-        try:
-            camera.is_streaming = True
-            camera.update_ha_state()
-            camera.mjpeg_stream(handler)
-
-        except (requests.RequestException, IOError):
-            camera.is_streaming = False
-            camera.update_ha_state()
-
-    hass.http.register_path(
-        'GET',
-        re.compile(
-            r'/api/camera_proxy_stream/(?P<entity_id>[a-zA-Z\._0-9]+)'),
-        _proxy_camera_mjpeg_stream)
-
     return True
 
 
@@ -126,6 +46,11 @@ class Camera(Entity):
         """Initialize a camera."""
         self.is_streaming = False
 
+    @property
+    def access_token(self):
+        """Access token for this camera."""
+        return str(id(self))
+
     @property
     def should_poll(self):
         """No need to poll cameras."""
@@ -134,22 +59,19 @@ class Camera(Entity):
     @property
     def entity_picture(self):
         """Return a link to the camera feed as entity picture."""
-        return ENTITY_IMAGE_URL.format(self.entity_id)
+        return ENTITY_IMAGE_URL.format(self.entity_id, self.access_token)
 
     @property
-    # pylint: disable=no-self-use
     def is_recording(self):
         """Return true if the device is recording."""
         return False
 
     @property
-    # pylint: disable=no-self-use
     def brand(self):
         """Camera brand."""
         return None
 
     @property
-    # pylint: disable=no-self-use
     def model(self):
         """Camera model."""
         return None
@@ -158,33 +80,33 @@ class Camera(Entity):
         """Return bytes of camera image."""
         raise NotImplementedError()
 
-    def mjpeg_stream(self, handler):
+    def mjpeg_stream(self, response):
         """Generate an HTTP MJPEG stream from camera images."""
-        handler.request.sendall(bytes('HTTP/1.1 200 OK\r\n', 'utf-8'))
-        handler.request.sendall(bytes(
-            'Content-type: multipart/x-mixed-replace; \
-                boundary=--jpgboundary\r\n\r\n', 'utf-8'))
-        handler.request.sendall(bytes('--jpgboundary\r\n', 'utf-8'))
+        def stream():
+            """Stream images as mjpeg stream."""
+            try:
+                last_image = None
+                while True:
+                    img_bytes = self.camera_image()
 
-        # MJPEG_START_HEADER.format()
-        while True:
-            img_bytes = self.camera_image()
-            if img_bytes is None:
-                continue
-            headers_str = '\r\n'.join((
-                'Content-length: {}'.format(len(img_bytes)),
-                'Content-type: image/jpeg',
-            )) + '\r\n\r\n'
+                    if img_bytes is not None and img_bytes != last_image:
+                        yield bytes(
+                            '--jpegboundary\r\n'
+                            'Content-Type: image/jpeg\r\n'
+                            'Content-Length: {}\r\n\r\n'.format(
+                                len(img_bytes)), 'utf-8') + img_bytes + b'\r\n'
 
-            handler.request.sendall(
-                bytes(headers_str, 'utf-8') +
-                img_bytes +
-                bytes('\r\n', 'utf-8'))
+                        last_image = img_bytes
 
-            handler.request.sendall(
-                bytes('--jpgboundary\r\n', 'utf-8'))
+                    time.sleep(0.5)
+            except GeneratorExit:
+                pass
 
-            time.sleep(0.5)
+        return response(
+            stream(),
+            content_type=('multipart/x-mixed-replace; '
+                          'boundary=--jpegboundary')
+        )
 
     @property
     def state(self):
@@ -199,7 +121,9 @@ class Camera(Entity):
     @property
     def state_attributes(self):
         """Camera state attributes."""
-        attr = {}
+        attr = {
+            'access_token': self.access_token,
+        }
 
         if self.model:
             attr['model_name'] = self.model
@@ -208,3 +132,60 @@ class Camera(Entity):
             attr['brand'] = self.brand
 
         return attr
+
+
+class CameraView(HomeAssistantView):
+    """Base CameraView."""
+
+    requires_auth = False
+
+    def __init__(self, hass, entities):
+        """Initialize a basic camera view."""
+        super().__init__(hass)
+        self.entities = entities
+
+    def get(self, request, entity_id):
+        """Start a get request."""
+        camera = self.entities.get(entity_id)
+
+        if camera is None:
+            return self.Response(status=404)
+
+        authenticated = (request.authenticated or
+                         request.args.get('token') == camera.access_token)
+
+        if not authenticated:
+            return self.Response(status=401)
+
+        return self.handle(camera)
+
+    def handle(self, camera):
+        """Hanlde the camera request."""
+        raise NotImplementedError()
+
+
+class CameraImageView(CameraView):
+    """Camera view to serve an image."""
+
+    url = "/api/camera_proxy/<entity(domain=camera):entity_id>"
+    name = "api:camera:image"
+
+    def handle(self, camera):
+        """Serve camera image."""
+        response = camera.camera_image()
+
+        if response is None:
+            return self.Response(status=500)
+
+        return self.Response(response)
+
+
+class CameraMjpegStream(CameraView):
+    """Camera View to serve an MJPEG stream."""
+
+    url = "/api/camera_proxy_stream/<entity(domain=camera):entity_id>"
+    name = "api:camera:stream"
+
+    def handle(self, camera):
+        """Serve camera image."""
+        return camera.mjpeg_stream(self.Response)

homeassistant/components/camera/demo.py

@@ -18,7 +18,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 
 
 class DemoCamera(Camera):
-    """A Demo camera."""
+    """The representation of a Demo camera."""
 
     def __init__(self, name):
         """Initialize demo camera component."""

homeassistant/components/camera/ffmpeg.py

@@ -0,0 +1,75 @@
+"""
+Support for Cameras with FFmpeg as decoder.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.ffmpeg/
+"""
+import logging
+from contextlib import closing
+
+import voluptuous as vol
+
+from homeassistant.components.camera import Camera
+from homeassistant.components.camera.mjpeg import extract_image_from_mjpeg
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import CONF_NAME, CONF_PLATFORM
+
+REQUIREMENTS = ["ha-ffmpeg==0.4"]
+
+CONF_INPUT = 'input'
+CONF_FFMPEG_BIN = 'ffmpeg_bin'
+CONF_EXTRA_ARGUMENTS = 'extra_arguments'
+
+PLATFORM_SCHEMA = vol.Schema({
+    vol.Required(CONF_PLATFORM): "ffmpeg",
+    vol.Optional(CONF_NAME, default="FFmpeg"): cv.string,
+    vol.Required(CONF_INPUT): cv.string,
+    vol.Optional(CONF_FFMPEG_BIN, default="ffmpeg"): cv.string,
+    vol.Optional(CONF_EXTRA_ARGUMENTS): cv.string,
+})
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """Setup a FFmpeg Camera."""
+    add_devices_callback([FFmpegCamera(config)])
+
+
+class FFmpegCamera(Camera):
+    """An implementation of an FFmpeg camera."""
+
+    def __init__(self, config):
+        """Initialize a FFmpeg camera."""
+        super().__init__()
+        self._name = config.get(CONF_NAME)
+        self._input = config.get(CONF_INPUT)
+        self._extra_arguments = config.get(CONF_EXTRA_ARGUMENTS)
+        self._ffmpeg_bin = config.get(CONF_FFMPEG_BIN)
+
+    def _ffmpeg_stream(self):
+        """Return a FFmpeg process object."""
+        from haffmpeg import CameraMjpeg
+
+        ffmpeg = CameraMjpeg(self._ffmpeg_bin)
+        ffmpeg.open_camera(self._input, extra_cmd=self._extra_arguments)
+        return ffmpeg
+
+    def camera_image(self):
+        """Return a still image response from the camera."""
+        with closing(self._ffmpeg_stream()) as stream:
+            return extract_image_from_mjpeg(stream)
+
+    def mjpeg_stream(self, response):
+        """Generate an HTTP MJPEG stream from the camera."""
+        stream = self._ffmpeg_stream()
+        return response(
+            stream,
+            mimetype='multipart/x-mixed-replace;boundary=ffserver',
+            direct_passthrough=True
+        )
+
+    @property
+    def name(self):
+        """Return the name of this camera."""
+        return self._name

homeassistant/components/camera/foscam.py

@@ -49,7 +49,7 @@ class FoscamCamera(Camera):
     def camera_image(self):
         """Return a still image reponse from the camera."""
         # Send the request to snap a picture and return raw jpg data
-        response = requests.get(self._snap_picture_url)
+        response = requests.get(self._snap_picture_url, timeout=10)
 
         return response.content
 

homeassistant/components/camera/generic.py

@@ -43,13 +43,14 @@ class GenericCamera(Camera):
             try:
                 response = requests.get(
                     self._still_image_url,
-                    auth=HTTPBasicAuth(self._username, self._password))
+                    auth=HTTPBasicAuth(self._username, self._password),
+                    timeout=10)
             except requests.exceptions.RequestException as error:
                 _LOGGER.error('Error getting camera image: %s', error)
                 return None
         else:
             try:
-                response = requests.get(self._still_image_url)
+                response = requests.get(self._still_image_url, timeout=10)
             except requests.exceptions.RequestException as error:
                 _LOGGER.error('Error getting camera image: %s', error)
                 return None

homeassistant/components/camera/local_file.py

@@ -0,0 +1,53 @@
+"""Camera that loads a picture from a local file."""
+
+import logging
+import os
+
+from homeassistant.components.camera import Camera
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Camera."""
+    # check for missing required configuration variable
+    if config.get("file_path") is None:
+        _LOGGER.error("Missing required variable: file_path")
+        return False
+
+    setup_config = (
+        {
+            "name": config.get("name", "Local File"),
+            "file_path": config.get("file_path")
+        }
+    )
+
+    # check filepath given is readable
+    if not os.access(setup_config["file_path"], os.R_OK):
+        _LOGGER.error("file path is not readable")
+        return False
+
+    add_devices([
+        LocalFile(setup_config)
+    ])
+
+
+class LocalFile(Camera):
+    """Local camera."""
+
+    def __init__(self, device_info):
+        """Initialize Local File Camera component."""
+        super().__init__()
+
+        self._name = device_info["name"]
+        self._config = device_info
+
+    def camera_image(self):
+        """Return image response."""
+        with open(self._config["file_path"], 'rb') as file:
+            return file.read()
+
+    @property
+    def name(self):
+        """Return the name of this camera."""
+        return self._name

homeassistant/components/camera/mjpeg.py

@@ -11,7 +11,6 @@ import requests
 from requests.auth import HTTPBasicAuth
 
 from homeassistant.components.camera import DOMAIN, Camera
-from homeassistant.const import HTTP_OK
 from homeassistant.helpers import validate_config
 
 CONTENT_TYPE_HEADER = 'Content-Type'
@@ -29,6 +28,18 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
     add_devices_callback([MjpegCamera(config)])
 
 
+def extract_image_from_mjpeg(stream):
+    """Take in a MJPEG stream object, return the jpg from it."""
+    data = b''
+    for chunk in stream:
+        data += chunk
+        jpg_start = data.find(b'\xff\xd8')
+        jpg_end = data.find(b'\xff\xd9')
+        if jpg_start != -1 and jpg_end != -1:
+            jpg = data[jpg_start:jpg_end + 2]
+            return jpg
+
+
 # pylint: disable=too-many-instance-attributes
 class MjpegCamera(Camera):
     """An implementation of an IP camera that is reachable over a URL."""
@@ -47,40 +58,23 @@ class MjpegCamera(Camera):
             return requests.get(self._mjpeg_url,
                                 auth=HTTPBasicAuth(self._username,
                                                    self._password),
-                                stream=True)
+                                stream=True, timeout=10)
         else:
-            return requests.get(self._mjpeg_url,
-                                stream=True)
+            return requests.get(self._mjpeg_url, stream=True, timeout=10)
 
     def camera_image(self):
         """Return a still image response from the camera."""
-        def process_response(response):
-            """Take in a response object, return the jpg from it."""
-            data = b''
-            for chunk in response.iter_content(1024):
-                data += chunk
-                jpg_start = data.find(b'\xff\xd8')
-                jpg_end = data.find(b'\xff\xd9')
-                if jpg_start != -1 and jpg_end != -1:
-                    jpg = data[jpg_start:jpg_end + 2]
-                    return jpg
-
         with closing(self.camera_stream()) as response:
-            return process_response(response)
+            return extract_image_from_mjpeg(response.iter_content(1024))
 
-    def mjpeg_stream(self, handler):
+    def mjpeg_stream(self, response):
         """Generate an HTTP MJPEG stream from the camera."""
-        response = self.camera_stream()
-        content_type = response.headers[CONTENT_TYPE_HEADER]
-
-        handler.send_response(HTTP_OK)
-        handler.send_header(CONTENT_TYPE_HEADER, content_type)
-        handler.end_headers()
-
-        for chunk in response.iter_content(chunk_size=1024):
-            if not chunk:
-                break
-            handler.wfile.write(chunk)
+        stream = self.camera_stream()
+        return response(
+            stream.iter_content(chunk_size=1024),
+            mimetype=stream.headers[CONTENT_TYPE_HEADER],
+            direct_passthrough=True
+        )
 
     @property
     def name(self):

homeassistant/components/camera/netatmo.py

@@ -0,0 +1,104 @@
+"""
+Support for the Netatmo Welcome camera.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.netatmo/
+"""
+import logging
+from datetime import timedelta
+import requests
+from homeassistant.util import Throttle
+
+from homeassistant.components.camera import Camera
+from homeassistant.loader import get_component
+
+DEPENDENCIES = ["netatmo"]
+
+_LOGGER = logging.getLogger(__name__)
+
+CONF_HOME = 'home'
+ATTR_CAMERAS = 'cameras'
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(minutes=10)
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """Setup access to Netatmo Welcome cameras."""
+    netatmo = get_component('netatmo')
+    home = config.get(CONF_HOME, None)
+    data = WelcomeData(netatmo.NETATMO_AUTH, home)
+
+    for camera_name in data.get_camera_names():
+        if ATTR_CAMERAS in config:
+            if camera_name not in config[ATTR_CAMERAS]:
+                continue
+        add_devices_callback([WelcomeCamera(data, camera_name, home)])
+
+
+class WelcomeCamera(Camera):
+    """Representation of the images published from Welcome camera."""
+
+    def __init__(self, data, camera_name, home):
+        """Setup for access to the BloomSky camera images."""
+        super(WelcomeCamera, self).__init__()
+        self._data = data
+        self._camera_name = camera_name
+        if home:
+            self._name = home + ' / ' + camera_name
+        else:
+            self._name = camera_name
+        self._vpnurl, self._localurl = self._data.welcomedata.cameraUrls(
+            camera=camera_name
+            )
+
+    def camera_image(self):
+        """Return a still image response from the camera."""
+        try:
+            if self._localurl:
+                response = requests.get('{0}/live/snapshot_720.jpg'.format(
+                    self._localurl), timeout=10)
+            else:
+                response = requests.get('{0}/live/snapshot_720.jpg'.format(
+                    self._vpnurl), timeout=10)
+        except requests.exceptions.RequestException as error:
+            _LOGGER.error('Welcome VPN url changed: %s', error)
+            self._data.update()
+            (self._vpnurl, self._localurl) = \
+                self._data.welcomedata.cameraUrls(camera=self._camera_name)
+            return None
+        return response.content
+
+    @property
+    def name(self):
+        """Return the name of this Netatmo Welcome device."""
+        return self._name
+
+
+class WelcomeData(object):
+    """Get the latest data from NetAtmo."""
+
+    def __init__(self, auth, home=None):
+        """Initialize the data object."""
+        self.auth = auth
+        self.welcomedata = None
+        self.camera_names = []
+        self.home = home
+
+    def get_camera_names(self):
+        """Return all module available on the API as a list."""
+        self.update()
+        if not self.home:
+            for home in self.welcomedata.cameras:
+                for camera in self.welcomedata.cameras[home].values():
+                    self.camera_names.append(camera['name'])
+        else:
+            for camera in self.welcomedata.cameras[self.home].values():
+                self.camera_names.append(camera['name'])
+        return self.camera_names
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def update(self):
+        """Call the NetAtmo API to update the data."""
+        import lnetatmo
+        self.welcomedata = lnetatmo.WelcomeData(self.auth)

homeassistant/components/camera/rpi_camera.py

@@ -0,0 +1,90 @@
+"""
+Camera platform that has a Raspberry Pi camera.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.rpi_camera/
+"""
+import os
+import subprocess
+import logging
+import shutil
+
+from homeassistant.components.camera import Camera
+
+_LOGGER = logging.getLogger(__name__)
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Raspberry Camera."""
+    if shutil.which("raspistill") is None:
+        _LOGGER.error("Error: raspistill not found")
+        return False
+
+    setup_config = (
+        {
+            "name": config.get("name", "Raspberry Pi Camera"),
+            "image_width": int(config.get("image_width", "640")),
+            "image_height": int(config.get("image_height", "480")),
+            "image_quality": int(config.get("image_quality", "7")),
+            "image_rotation": int(config.get("image_rotation", "0")),
+            "timelapse": int(config.get("timelapse", "2000")),
+            "horizontal_flip": int(config.get("horizontal_flip", "0")),
+            "vertical_flip": int(config.get("vertical_flip", "0")),
+            "file_path": config.get("file_path",
+                                    os.path.join(os.path.dirname(__file__),
+                                                 'image.jpg'))
+        }
+    )
+
+    # check filepath given is writable
+    if not os.access(setup_config["file_path"], os.W_OK):
+        _LOGGER.error("Error: file path is not writable")
+        return False
+
+    add_devices([
+        RaspberryCamera(setup_config)
+    ])
+
+
+class RaspberryCamera(Camera):
+    """Representation of a Raspberry Pi camera."""
+
+    def __init__(self, device_info):
+        """Initialize Raspberry Pi camera component."""
+        super().__init__()
+
+        self._name = device_info["name"]
+        self._config = device_info
+
+        # kill if there's raspistill instance
+        subprocess.Popen(['killall', 'raspistill'],
+                         stdout=subprocess.DEVNULL,
+                         stderr=subprocess.STDOUT)
+
+        cmd_args = [
+            'raspistill', '--nopreview', '-o', str(device_info["file_path"]),
+            '-t', '0', '-w', str(device_info["image_width"]),
+            '-h', str(device_info["image_height"]),
+            '-tl', str(device_info["timelapse"]),
+            '-q', str(device_info["image_quality"]),
+            '-rot', str(device_info["image_rotation"])
+        ]
+        if device_info["horizontal_flip"]:
+            cmd_args.append("-hf")
+
+        if device_info["vertical_flip"]:
+            cmd_args.append("-vf")
+
+        subprocess.Popen(cmd_args,
+                         stdout=subprocess.DEVNULL,
+                         stderr=subprocess.STDOUT)
+
+    def camera_image(self):
+        """Return raspstill image response."""
+        with open(self._config["file_path"], 'rb') as file:
+            return file.read()
+
+    @property
+    def name(self):
+        """Return the name of this camera."""
+        return self._name

homeassistant/components/camera/uvc.py

@@ -12,7 +12,7 @@ import requests
 from homeassistant.components.camera import DOMAIN, Camera
 from homeassistant.helpers import validate_config
 
-REQUIREMENTS = ['uvcclient==0.8']
+REQUIREMENTS = ['uvcclient==0.9.0']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -45,13 +45,15 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
         _LOGGER.error('Unable to connect to NVR: %s', str(ex))
         return False
 
+    identifier = nvrconn.server_version >= (3, 2, 0) and 'id' or 'uuid'
     # Filter out airCam models, which are not supported in the latest
     # version of UnifiVideo and which are EOL by Ubiquiti
-    cameras = [camera for camera in cameras
-               if 'airCam' not in nvrconn.get_camera(camera['uuid'])['model']]
+    cameras = [
+        camera for camera in cameras
+        if 'airCam' not in nvrconn.get_camera(camera[identifier])['model']]
 
     add_devices([UnifiVideoCamera(nvrconn,
-                                  camera['uuid'],
+                                  camera[identifier],
                                   camera['name'])
                  for camera in cameras])
     return True
@@ -110,12 +112,17 @@ class UnifiVideoCamera(Camera):
                           dict(name=self._name))
             password = 'ubnt'
 
+        if self._nvr.server_version >= (3, 2, 0):
+            client_cls = uvc_camera.UVCCameraClientV320
+        else:
+            client_cls = uvc_camera.UVCCameraClient
+
         camera = None
         for addr in addrs:
             try:
-                camera = uvc_camera.UVCCameraClient(addr,
-                                                    caminfo['username'],
-                                                    password)
+                camera = client_cls(addr,
+                                    caminfo['username'],
+                                    password)
                 camera.login()
                 _LOGGER.debug('Logged into UVC camera %(name)s via %(addr)s',
                               dict(name=self._name, addr=addr))

homeassistant/components/configurator.py

@@ -8,7 +8,7 @@ the user has submitted configuration information.
 """
 import logging
 
-from homeassistant.const import EVENT_TIME_CHANGED
+from homeassistant.const import EVENT_TIME_CHANGED, ATTR_FRIENDLY_NAME
 from homeassistant.helpers.entity import generate_entity_id
 
 DOMAIN = "configurator"
@@ -19,6 +19,8 @@ SERVICE_CONFIGURE = "configure"
 STATE_CONFIGURE = "configure"
 STATE_CONFIGURED = "configured"
 
+ATTR_LINK_NAME = "link_name"
+ATTR_LINK_URL = "link_url"
 ATTR_CONFIGURE_ID = "configure_id"
 ATTR_DESCRIPTION = "description"
 ATTR_DESCRIPTION_IMAGE = "description_image"
@@ -34,7 +36,7 @@ _LOGGER = logging.getLogger(__name__)
 # pylint: disable=too-many-arguments
 def request_config(
         hass, name, callback, description=None, description_image=None,
-        submit_caption=None, fields=None):
+        submit_caption=None, fields=None, link_name=None, link_url=None):
     """Create a new request for configuration.
 
     Will return an ID to be used for sequent calls.
@@ -43,7 +45,8 @@ def request_config(
 
     request_id = instance.request_config(
         name, callback,
-        description, description_image, submit_caption, fields)
+        description, description_image, submit_caption,
+        fields, link_name, link_url)
 
     _REQUESTS[request_id] = instance
 
@@ -100,7 +103,8 @@ class Configurator(object):
     # pylint: disable=too-many-arguments
     def request_config(
             self, name, callback,
-            description, description_image, submit_caption, fields):
+            description, description_image, submit_caption,
+            fields, link_name, link_url):
         """Setup a request for configuration."""
         entity_id = generate_entity_id(ENTITY_ID_FORMAT, name, hass=self.hass)
 
@@ -114,6 +118,7 @@ class Configurator(object):
         data = {
             ATTR_CONFIGURE_ID: request_id,
             ATTR_FIELDS: fields,
+            ATTR_FRIENDLY_NAME: name,
         }
 
         data.update({
@@ -121,6 +126,8 @@ class Configurator(object):
                 (ATTR_DESCRIPTION, description),
                 (ATTR_DESCRIPTION_IMAGE, description_image),
                 (ATTR_SUBMIT_CAPTION, submit_caption),
+                (ATTR_LINK_NAME, link_name),
+                (ATTR_LINK_URL, link_url),
             ] if value is not None
         })
 

homeassistant/components/conversation.py

@@ -6,10 +6,14 @@ https://home-assistant.io/components/conversation/
 """
 import logging
 import re
+import warnings
+
+import voluptuous as vol
 
 from homeassistant import core
 from homeassistant.const import (
     ATTR_ENTITY_ID, SERVICE_TURN_OFF, SERVICE_TURN_ON)
+import homeassistant.helpers.config_validation as cv
 
 DOMAIN = "conversation"
 
@@ -17,24 +21,25 @@ SERVICE_PROCESS = "process"
 
 ATTR_TEXT = "text"
 
+SERVICE_PROCESS_SCHEMA = vol.Schema({
+    vol.Required(ATTR_TEXT): vol.All(cv.string, vol.Lower),
+})
+
 REGEX_TURN_COMMAND = re.compile(r'turn (?P<name>(?: |\w)+) (?P<command>\w+)')
 
-REQUIREMENTS = ['fuzzywuzzy==0.8.0']
+REQUIREMENTS = ['fuzzywuzzy==0.11.1']
 
 
 def setup(hass, config):
     """Register the process service."""
+    warnings.filterwarnings('ignore', module='fuzzywuzzy')
     from fuzzywuzzy import process as fuzzyExtract
 
     logger = logging.getLogger(__name__)
 
     def process(service):
         """Parse text into commands."""
-        if ATTR_TEXT not in service.data:
-            logger.error("Received process service call without a text")
-            return
-
-        text = service.data[ATTR_TEXT].lower()
+        text = service.data[ATTR_TEXT]
         match = REGEX_TURN_COMMAND.match(text)
 
         if not match:
@@ -62,9 +67,9 @@ def setup(hass, config):
             }, blocking=True)
 
         else:
-            logger.error(
-                'Got unsupported command %s from text %s', command, text)
-
-    hass.services.register(DOMAIN, SERVICE_PROCESS, process)
+            logger.error('Got unsupported command %s from text %s',
+                         command, text)
 
+    hass.services.register(DOMAIN, SERVICE_PROCESS, process,
+                           schema=SERVICE_PROCESS_SCHEMA)
     return True

homeassistant/components/demo.py

@@ -21,6 +21,7 @@ COMPONENTS_WITH_DEMO_PLATFORM = [
     'camera',
     'device_tracker',
     'garage_door',
+    'hvac',
     'light',
     'lock',
     'media_player',
@@ -36,6 +37,7 @@ def setup(hass, config):
     """Setup a demo environment."""
     group = loader.get_component('group')
     configurator = loader.get_component('configurator')
+    persistent_notification = loader.get_component('persistent_notification')
 
     config.setdefault(ha.DOMAIN, {})
     config.setdefault(DOMAIN, {})
@@ -58,6 +60,11 @@ def setup(hass, config):
         demo_config[component] = {CONF_PLATFORM: 'demo'}
         bootstrap.setup_component(hass, component, demo_config)
 
+    # Setup example persistent notification
+    persistent_notification.create(
+        hass, 'This is an example of a persistent notification.',
+        title='Example Notification')
+
     # Setup room groups
     lights = sorted(hass.states.entity_ids('light'))
     switches = sorted(hass.states.entity_ids('switch'))
@@ -66,7 +73,9 @@ def setup(hass, config):
         lights[1], switches[0], 'input_select.living_room_preset',
         'rollershutter.living_room_window', media_players[1],
         'scene.romantic_lights'])
-    group.Group(hass, 'bedroom', [lights[0], switches[1], media_players[0]])
+    group.Group(hass, 'bedroom', [
+        lights[0], switches[1], media_players[0],
+        'input_slider.noise_allowance'])
     group.Group(hass, 'kitchen', [
         lights[2], 'rollershutter.kitchen_window', 'lock.kitchen_door'])
     group.Group(hass, 'doors', [
@@ -95,18 +104,18 @@ def setup(hass, config):
             'demo': {
                 'alias': 'Toggle {}'.format(lights[0].split('.')[1]),
                 'sequence': [{
-                    'execute_service': 'light.turn_off',
-                    'service_data': {ATTR_ENTITY_ID: lights[0]}
+                    'service': 'light.turn_off',
+                    'data': {ATTR_ENTITY_ID: lights[0]}
                 }, {
                     'delay': {'seconds': 5}
                 }, {
-                    'execute_service': 'light.turn_on',
-                    'service_data': {ATTR_ENTITY_ID: lights[0]}
+                    'service': 'light.turn_on',
+                    'data': {ATTR_ENTITY_ID: lights[0]}
                 }, {
                     'delay': {'seconds': 5}
                 }, {
-                    'execute_service': 'light.turn_off',
-                    'service_data': {ATTR_ENTITY_ID: lights[0]}
+                    'service': 'light.turn_off',
+                    'data': {ATTR_ENTITY_ID: lights[0]}
                 }]
             }}})
 
@@ -136,7 +145,7 @@ def setup(hass, config):
                                              'Home Alone']},
           'who_cooks': {'icon': 'mdi:panda',
                         'initial': 'Anne Therese',
-                        'name': 'Who cooks today',
+                        'name': 'Cook today',
                         'options': ['Paulus', 'Anne Therese']}}})
     # Set up input boolean
     bootstrap.setup_component(
@@ -144,6 +153,22 @@ def setup(hass, config):
         {'input_boolean': {'notify': {'icon': 'mdi:car',
                                       'initial': False,
                                       'name': 'Notify Anne Therese is home'}}})
+
+    # Set up input boolean
+    bootstrap.setup_component(
+        hass, 'input_slider',
+        {'input_slider': {
+            'noise_allowance': {'icon': 'mdi:bell-ring',
+                                'min': 0,
+                                'max': 10,
+                                'name': 'Allowed Noise',
+                                'unit_of_measurement': 'dB'}}})
+
+    # Set up weblink
+    bootstrap.setup_component(
+        hass, 'weblink',
+        {'weblink': {'entities': [{'name': 'Router',
+                                   'url': 'http://192.168.1.1'}]}})
     # Setup configurator
     configurator_ids = []
 

homeassistant/components/device_tracker/__init__.py

@@ -12,11 +12,13 @@ import os
 import threading
 
 from homeassistant.bootstrap import prepare_setup_platform
-from homeassistant.components import discovery, group, zone
+from homeassistant.components import group, zone
+from homeassistant.components.discovery import SERVICE_NETGEAR
 from homeassistant.config import load_yaml_config_file
 from homeassistant.exceptions import HomeAssistantError
-from homeassistant.helpers import config_per_platform
+from homeassistant.helpers import config_per_platform, discovery
 from homeassistant.helpers.entity import Entity
+import homeassistant.helpers.config_validation as cv
 import homeassistant.util as util
 import homeassistant.util.dt as dt_util
 
@@ -25,6 +27,7 @@ from homeassistant.const import (
     ATTR_GPS_ACCURACY, ATTR_LATITUDE, ATTR_LONGITUDE,
     DEVICE_DEFAULT_NAME, STATE_HOME, STATE_NOT_HOME)
 
+PLATFORM_SCHEMA = cv.PLATFORM_SCHEMA
 DOMAIN = "device_tracker"
 DEPENDENCIES = ['zone']
 
@@ -60,7 +63,7 @@ ATTR_GPS = 'gps'
 ATTR_BATTERY = 'battery'
 
 DISCOVERY_PLATFORMS = {
-    discovery.SERVICE_NETGEAR: 'netgear',
+    SERVICE_NETGEAR: 'netgear',
 }
 _LOGGER = logging.getLogger(__name__)
 
@@ -93,8 +96,11 @@ def setup(hass, config):
     yaml_path = hass.config.path(YAML_DEVICES)
 
     conf = config.get(DOMAIN, {})
+
+    # Config can be an empty list. In that case, substitute a dict
     if isinstance(conf, list):
-        conf = conf[0]
+        conf = conf[0] if len(conf) > 0 else {}
+
     consider_home = timedelta(
         seconds=util.convert(conf.get(CONF_CONSIDER_HOME), int,
                              DEFAULT_CONSIDER_HOME))
@@ -129,8 +135,7 @@ def setup(hass, config):
         except Exception:  # pylint: disable=broad-except
             _LOGGER.exception('Error setting up platform %s', p_type)
 
-    for p_type, p_config in \
-            config_per_platform(config, DOMAIN, _LOGGER):
+    for p_type, p_config in config_per_platform(config, DOMAIN):
         setup_platform(p_type, p_config)
 
     def device_tracker_discovered(service, info):
@@ -193,7 +198,7 @@ class DeviceTracker(object):
                 if not device:
                     dev_id = util.slugify(host_name or '') or util.slugify(mac)
             else:
-                dev_id = str(dev_id).lower()
+                dev_id = cv.slug(str(dev_id).lower())
                 device = self.devices.get(dev_id)
 
             if device:
@@ -204,6 +209,7 @@ class DeviceTracker(object):
                 return
 
             # If no device can be found, create it
+            dev_id = util.ensure_unique_string(dev_id, self.devices.keys())
             device = Device(
                 self.hass, self.consider_home, self.home_range, self.track_new,
                 dev_id, mac, (host_name or dev_id).replace('_', ' '))
@@ -371,12 +377,16 @@ def load_config(path, hass, consider_home, home_range):
     """Load devices from YAML configuration file."""
     if not os.path.isfile(path):
         return []
-    return [
-        Device(hass, consider_home, home_range, device.get('track', False),
-               str(dev_id).lower(), str(device.get('mac')).upper(),
-               device.get('name'), device.get('picture'),
-               device.get(CONF_AWAY_HIDE, DEFAULT_AWAY_HIDE))
-        for dev_id, device in load_yaml_config_file(path).items()]
+    try:
+        return [
+            Device(hass, consider_home, home_range, device.get('track', False),
+                   str(dev_id).lower(), str(device.get('mac')).upper(),
+                   device.get('name'), device.get('picture'),
+                   device.get(CONF_AWAY_HIDE, DEFAULT_AWAY_HIDE))
+            for dev_id, device in load_yaml_config_file(path).items()]
+    except HomeAssistantError:
+        # When YAML file could not be loaded/did not contain a dict
+        return []
 
 
 def setup_scanner_platform(hass, config, scanner, see_device):

homeassistant/components/device_tracker/asuswrt.py

@@ -6,8 +6,10 @@ https://home-assistant.io/components/device_tracker.asuswrt/
 """
 import logging
 import re
+import socket
 import telnetlib
 import threading
+from collections import namedtuple
 from datetime import timedelta
 
 from homeassistant.components.device_tracker import DOMAIN
@@ -19,13 +21,31 @@ from homeassistant.util import Throttle
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=5)
 
 _LOGGER = logging.getLogger(__name__)
+REQUIREMENTS = ['pexpect==4.0.1']
 
+_LEASES_CMD = 'cat /var/lib/misc/dnsmasq.leases'
 _LEASES_REGEX = re.compile(
     r'\w+\s' +
     r'(?P<mac>(([0-9a-f]{2}[:-]){5}([0-9a-f]{2})))\s' +
     r'(?P<ip>([0-9]{1,3}[\.]){3}[0-9]{1,3})\s' +
     r'(?P<host>([^\s]+))')
 
+# command to get both 5GHz and 2.4GHz clients
+_WL_CMD = '{ wl -i eth2 assoclist & wl -i eth1 assoclist ; }'
+_WL_REGEX = re.compile(
+    r'\w+\s' +
+    r'(?P<mac>(([0-9A-F]{2}[:-]){5}([0-9A-F]{2})))')
+
+_ARP_CMD = 'arp -n'
+_ARP_REGEX = re.compile(
+    r'.+\s' +
+    r'\((?P<ip>([0-9]{1,3}[\.]){3}[0-9]{1,3})\)\s' +
+    r'.+\s' +
+    r'(?P<mac>(([0-9a-f]{2}[:-]){5}([0-9a-f]{2})))' +
+    r'\s' +
+    r'.*')
+
+_IP_NEIGH_CMD = 'ip neigh'
 _IP_NEIGH_REGEX = re.compile(
     r'(?P<ip>([0-9]{1,3}[\.]){3}[0-9]{1,3})\s' +
     r'\w+\s' +
@@ -38,23 +58,36 @@ _IP_NEIGH_REGEX = re.compile(
 def get_scanner(hass, config):
     """Validate the configuration and return an ASUS-WRT scanner."""
     if not validate_config(config,
-                           {DOMAIN: [CONF_HOST, CONF_USERNAME, CONF_PASSWORD]},
+                           {DOMAIN: [CONF_HOST, CONF_USERNAME]},
                            _LOGGER):
         return None
+    elif CONF_PASSWORD not in config[DOMAIN] and \
+            'ssh_key' not in config[DOMAIN] and \
+            'pub_key' not in config[DOMAIN]:
+        _LOGGER.error('Either a private key or password must be provided')
+        return None
 
     scanner = AsusWrtDeviceScanner(config[DOMAIN])
 
     return scanner if scanner.success_init else None
 
+AsusWrtResult = namedtuple('AsusWrtResult', 'neighbors leases arp')
+
 
 class AsusWrtDeviceScanner(object):
     """This class queries a router running ASUSWRT firmware."""
 
+    # pylint: disable=too-many-instance-attributes, too-many-branches
+    # Eighth attribute needed for mode (AP mode vs router mode)
+
     def __init__(self, config):
         """Initialize the scanner."""
         self.host = config[CONF_HOST]
         self.username = str(config[CONF_USERNAME])
-        self.password = str(config[CONF_PASSWORD])
+        self.password = str(config.get(CONF_PASSWORD, ''))
+        self.ssh_key = str(config.get('ssh_key', config.get('pub_key', '')))
+        self.protocol = config.get('protocol')
+        self.mode = config.get('mode')
 
         self.lock = threading.Lock()
 
@@ -88,7 +121,7 @@ class AsusWrtDeviceScanner(object):
             return False
 
         with self.lock:
-            _LOGGER.info("Checking ARP")
+            _LOGGER.info('Checking ARP')
             data = self.get_asuswrt_data()
             if not data:
                 return False
@@ -100,8 +133,45 @@ class AsusWrtDeviceScanner(object):
             self.last_results = active_clients
             return True
 
-    def get_asuswrt_data(self):
-        """Retrieve data from ASUSWRT and return parsed result."""
+    def ssh_connection(self):
+        """Retrieve data from ASUSWRT via the ssh protocol."""
+        from pexpect import pxssh, exceptions
+
+        try:
+            ssh = pxssh.pxssh()
+            if self.ssh_key:
+                ssh.login(self.host, self.username, ssh_key=self.ssh_key)
+            elif self.password:
+                ssh.login(self.host, self.username, self.password)
+            else:
+                _LOGGER.error('No password or private key specified')
+                return None
+            ssh.sendline(_IP_NEIGH_CMD)
+            ssh.prompt()
+            neighbors = ssh.before.split(b'\n')[1:-1]
+            if self.mode == 'ap':
+                ssh.sendline(_ARP_CMD)
+                ssh.prompt()
+                arp_result = ssh.before.split(b'\n')[1:-1]
+                ssh.sendline(_WL_CMD)
+                ssh.prompt()
+                leases_result = ssh.before.split(b'\n')[1:-1]
+            else:
+                arp_result = ['']
+                ssh.sendline(_LEASES_CMD)
+                ssh.prompt()
+                leases_result = ssh.before.split(b'\n')[1:-1]
+            ssh.logout()
+            return AsusWrtResult(neighbors, leases_result, arp_result)
+        except pxssh.ExceptionPxssh as exc:
+            _LOGGER.error('Unexpected response from router: %s', exc)
+            return None
+        except exceptions.EOF:
+            _LOGGER.error('Connection refused or no route to host')
+            return None
+
+    def telnet_connection(self):
+        """Retrieve data from ASUSWRT via the telnet protocol."""
         try:
             telnet = telnetlib.Telnet(self.host)
             telnet.read_until(b'login: ')
@@ -109,44 +179,104 @@ class AsusWrtDeviceScanner(object):
             telnet.read_until(b'Password: ')
             telnet.write((self.password + '\n').encode('ascii'))
             prompt_string = telnet.read_until(b'#').split(b'\n')[-1]
-            telnet.write('ip neigh\n'.encode('ascii'))
+            telnet.write('{}\n'.format(_IP_NEIGH_CMD).encode('ascii'))
             neighbors = telnet.read_until(prompt_string).split(b'\n')[1:-1]
-            telnet.write('cat /var/lib/misc/dnsmasq.leases\n'.encode('ascii'))
-            leases_result = telnet.read_until(prompt_string).split(b'\n')[1:-1]
+            if self.mode == 'ap':
+                telnet.write('{}\n'.format(_ARP_CMD).encode('ascii'))
+                arp_result = (telnet.read_until(prompt_string).
+                              split(b'\n')[1:-1])
+                telnet.write('{}\n'.format(_WL_CMD).encode('ascii'))
+                leases_result = (telnet.read_until(prompt_string).
+                                 split(b'\n')[1:-1])
+            else:
+                arp_result = ['']
+                telnet.write('{}\n'.format(_LEASES_CMD).encode('ascii'))
+                leases_result = (telnet.read_until(prompt_string).
+                                 split(b'\n')[1:-1])
             telnet.write('exit\n'.encode('ascii'))
+            return AsusWrtResult(neighbors, leases_result, arp_result)
         except EOFError:
-            _LOGGER.exception("Unexpected response from router")
-            return
+            _LOGGER.error('Unexpected response from router')
+            return None
         except ConnectionRefusedError:
-            _LOGGER.exception("Connection refused by router," +
-                              " is telnet enabled?")
-            return
+            _LOGGER.error('Connection refused by router, is telnet enabled?')
+            return None
+        except socket.gaierror as exc:
+            _LOGGER.error('Socket exception: %s', exc)
+            return None
+        except OSError as exc:
+            _LOGGER.error('OSError: %s', exc)
+            return None
+
+    def get_asuswrt_data(self):
+        """Retrieve data from ASUSWRT and return parsed result."""
+        if self.protocol == 'ssh':
+            result = self.ssh_connection()
+        elif self.protocol == 'telnet':
+            result = self.telnet_connection()
+        else:
+            # autodetect protocol
+            result = self.ssh_connection()
+            if result:
+                self.protocol = 'ssh'
+            else:
+                result = self.telnet_connection()
+                if result:
+                    self.protocol = 'telnet'
+
+        if not result:
+            return {}
 
         devices = {}
-        for lease in leases_result:
-            match = _LEASES_REGEX.search(lease.decode('utf-8'))
+        if self.mode == 'ap':
+            for lease in result.leases:
+                match = _WL_REGEX.search(lease.decode('utf-8'))
 
-            if not match:
-                _LOGGER.warning("Could not parse lease row: %s", lease)
-                continue
+                if not match:
+                    _LOGGER.warning('Could not parse wl row: %s', lease)
+                    continue
 
-            # For leases where the client doesn't set a hostname, ensure it is
-            # blank and not '*', which breaks the entity_id down the line.
-            host = match.group('host')
-            if host == '*':
                 host = ''
 
-            devices[match.group('ip')] = {
-                'host': host,
-                'status': '',
-                'ip': match.group('ip'),
-                'mac': match.group('mac').upper(),
-                }
+                # match mac addresses to IP addresses in ARP table
+                for arp in result.arp:
+                    if match.group('mac').lower() in arp.decode('utf-8'):
+                        arp_match = _ARP_REGEX.search(arp.decode('utf-8'))
+                        if not arp_match:
+                            _LOGGER.warning('Could not parse arp row: %s', arp)
+                            continue
 
-        for neighbor in neighbors:
+                        devices[arp_match.group('ip')] = {
+                            'host': host,
+                            'status': '',
+                            'ip': arp_match.group('ip'),
+                            'mac': match.group('mac').upper(),
+                            }
+        else:
+            for lease in result.leases:
+                match = _LEASES_REGEX.search(lease.decode('utf-8'))
+
+                if not match:
+                    _LOGGER.warning('Could not parse lease row: %s', lease)
+                    continue
+
+                # For leases where the client doesn't set a hostname, ensure it
+                # is blank and not '*', which breaks entity_id down the line.
+                host = match.group('host')
+                if host == '*':
+                    host = ''
+
+                devices[match.group('ip')] = {
+                    'host': host,
+                    'status': '',
+                    'ip': match.group('ip'),
+                    'mac': match.group('mac').upper(),
+                    }
+
+        for neighbor in result.neighbors:
             match = _IP_NEIGH_REGEX.search(neighbor.decode('utf-8'))
             if not match:
-                _LOGGER.warning("Could not parse neighbor row: %s", neighbor)
+                _LOGGER.warning('Could not parse neighbor row: %s', neighbor)
                 continue
             if match.group('ip') in devices:
                 devices[match.group('ip')]['status'] = match.group('status')

homeassistant/components/device_tracker/bluetooth_tracker.py

@@ -0,0 +1,91 @@
+"""Tracking for bluetooth devices."""
+import logging
+from datetime import timedelta
+
+from homeassistant.helpers.event import track_point_in_utc_time
+from homeassistant.components.device_tracker import (
+    YAML_DEVICES,
+    CONF_TRACK_NEW,
+    CONF_SCAN_INTERVAL,
+    DEFAULT_SCAN_INTERVAL,
+    load_config,
+)
+import homeassistant.util as util
+import homeassistant.util.dt as dt_util
+
+_LOGGER = logging.getLogger(__name__)
+
+REQUIREMENTS = ['pybluez==0.22']
+
+BT_PREFIX = 'BT_'
+
+
+def setup_scanner(hass, config, see):
+    """Setup the Bluetooth Scanner."""
+    # pylint: disable=import-error
+    import bluetooth
+
+    def see_device(device):
+        """Mark a device as seen."""
+        see(mac=BT_PREFIX + device[0], host_name=device[1])
+
+    def discover_devices():
+        """Discover bluetooth devices."""
+        result = bluetooth.discover_devices(duration=8,
+                                            lookup_names=True,
+                                            flush_cache=True,
+                                            lookup_class=False)
+        _LOGGER.debug("Bluetooth devices discovered = " + str(len(result)))
+        return result
+
+    yaml_path = hass.config.path(YAML_DEVICES)
+    devs_to_track = []
+    devs_donot_track = []
+
+    # Load all known devices.
+    # We just need the devices so set consider_home and home range
+    # to 0
+    for device in load_config(yaml_path, hass, 0, 0):
+        # check if device is a valid bluetooth device
+        if device.mac and device.mac[:3].upper() == BT_PREFIX:
+            if device.track:
+                devs_to_track.append(device.mac[3:])
+            else:
+                devs_donot_track.append(device.mac[3:])
+
+    # if track new devices is true discover new devices
+    # on startup.
+    track_new = util.convert(config.get(CONF_TRACK_NEW), bool,
+                             len(devs_to_track) == 0)
+    if track_new:
+        for dev in discover_devices():
+            if dev[0] not in devs_to_track and \
+               dev[0] not in devs_donot_track:
+                devs_to_track.append(dev[0])
+                see_device(dev)
+
+    if not devs_to_track:
+        _LOGGER.warning("No bluetooth devices to track!")
+        return False
+
+    interval = util.convert(config.get(CONF_SCAN_INTERVAL), int,
+                            DEFAULT_SCAN_INTERVAL)
+
+    def update_bluetooth(now):
+        """Lookup bluetooth device and update status."""
+        try:
+            for mac in devs_to_track:
+                _LOGGER.debug("Scanning " + mac)
+                result = bluetooth.lookup_name(mac, timeout=5)
+                if not result:
+                    # Could not lookup device name
+                    continue
+                see_device((mac, result))
+        except bluetooth.BluetoothError:
+            _LOGGER.exception('Error looking up bluetooth device!')
+        track_point_in_utc_time(hass, update_bluetooth,
+                                now + timedelta(seconds=interval))
+
+    update_bluetooth(dt_util.utcnow())
+
+    return True

homeassistant/components/device_tracker/bt_home_hub_5.py

@@ -0,0 +1,141 @@
+"""
+Support for BT Home Hub 5.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/device_tracker.bt_home_hub_5/
+"""
+import logging
+import re
+import threading
+from datetime import timedelta
+import xml.etree.ElementTree as ET
+import json
+from urllib.parse import unquote
+
+import requests
+
+from homeassistant.helpers import validate_config
+from homeassistant.components.device_tracker import DOMAIN
+from homeassistant.const import CONF_HOST
+from homeassistant.util import Throttle
+
+# Return cached results if last scan was less then this time ago.
+MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
+
+_LOGGER = logging.getLogger(__name__)
+
+_MAC_REGEX = re.compile(r'(([0-9A-Fa-f]{1,2}\:){5}[0-9A-Fa-f]{1,2})')
+
+
+# pylint: disable=unused-argument
+def get_scanner(hass, config):
+    """Return a BT Home Hub 5 scanner if successful."""
+    if not validate_config(config,
+                           {DOMAIN: [CONF_HOST]},
+                           _LOGGER):
+        return None
+    scanner = BTHomeHub5DeviceScanner(config[DOMAIN])
+
+    return scanner if scanner.success_init else None
+
+
+class BTHomeHub5DeviceScanner(object):
+    """This class queries a BT Home Hub 5."""
+
+    def __init__(self, config):
+        """Initialise the scanner."""
+        _LOGGER.info("Initialising BT Home Hub 5")
+        self.host = config.get(CONF_HOST, '192.168.1.254')
+
+        self.lock = threading.Lock()
+
+        self.last_results = {}
+
+        self.url = 'http://{}/nonAuth/home_status.xml'.format(self.host)
+
+        # Test the router is accessible
+        data = _get_homehub_data(self.url)
+        self.success_init = data is not None
+
+    def scan_devices(self):
+        """Scan for new devices and return a list with found device IDs."""
+        self._update_info()
+
+        return (device for device in self.last_results)
+
+    def get_device_name(self, device):
+        """Return the name of the given device or None if we don't know."""
+        with self.lock:
+            # If not initialised and not already scanned and not found.
+            if device not in self.last_results:
+                self._update_info()
+
+                if not self.last_results:
+                    return None
+
+            return self.last_results.get(device)
+
+    @Throttle(MIN_TIME_BETWEEN_SCANS)
+    def _update_info(self):
+        """Ensure the information from the BT Home Hub 5 is up to date.
+
+        Return boolean if scanning successful.
+        """
+        if not self.success_init:
+            return False
+
+        with self.lock:
+            _LOGGER.info("Scanning")
+
+            data = _get_homehub_data(self.url)
+
+            if not data:
+                _LOGGER.warning('Error scanning devices')
+                return False
+
+            self.last_results = data
+
+            return True
+
+
+def _get_homehub_data(url):
+    """Retrieve data from BT Home Hub 5 and return parsed result."""
+    try:
+        response = requests.get(url, timeout=5)
+    except requests.exceptions.Timeout:
+        _LOGGER.exception("Connection to the router timed out")
+        return
+    if response.status_code == 200:
+        return _parse_homehub_response(response.text)
+    else:
+        _LOGGER.error("Invalid response from Home Hub: %s", response)
+
+
+def _parse_homehub_response(data_str):
+    """Parse the BT Home Hub 5 data format."""
+    root = ET.fromstring(data_str)
+
+    dirty_json = root.find('known_device_list').get('value')
+
+    # Normalise the JavaScript data to JSON.
+    clean_json = unquote(dirty_json.replace('\'', '\"')
+                         .replace('{', '{\"')
+                         .replace(':\"', '\":\"')
+                         .replace('\",', '\",\"'))
+
+    known_devices = [x for x in json.loads(clean_json) if x]
+
+    devices = {}
+
+    for device in known_devices:
+        name = device.get('name')
+        mac = device.get('mac')
+
+        if _MAC_REGEX.match(mac) or ',' in mac:
+            for mac_addr in mac.split(','):
+                if _MAC_REGEX.match(mac_addr):
+                    devices[mac_addr] = name
+        else:
+            devices[mac] = name
+
+    return devices

homeassistant/components/device_tracker/fritz.py

@@ -12,7 +12,9 @@ from homeassistant.const import CONF_HOST, CONF_PASSWORD, CONF_USERNAME
 from homeassistant.helpers import validate_config
 from homeassistant.util import Throttle
 
-REQUIREMENTS = ['fritzconnection==0.4.6']
+REQUIREMENTS = ['https://github.com/deisi/fritzconnection/archive/'
+                'b5c14515e1c8e2652b06b6316a7f3913df942841.zip'
+                '#fritzconnection==0.4.6']
 
 # Return cached results if last scan was less then this time ago.
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=5)

homeassistant/components/device_tracker/icloud.py

@@ -5,17 +5,28 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/device_tracker.icloud/
 """
 import logging
-import re
+import voluptuous as vol
 
-from homeassistant.const import CONF_PASSWORD, CONF_USERNAME
+from homeassistant.const import (CONF_PASSWORD, CONF_USERNAME,
+                                 EVENT_HOMEASSISTANT_START)
 from homeassistant.helpers.event import track_utc_time_change
+from homeassistant.util import slugify
+from homeassistant.components.device_tracker import (ENTITY_ID_FORMAT,
+                                                     PLATFORM_SCHEMA)
 
 _LOGGER = logging.getLogger(__name__)
 
-REQUIREMENTS = ['pyicloud==0.8.1']
+REQUIREMENTS = ['pyicloud==0.9.1']
 
 CONF_INTERVAL = 'interval'
-DEFAULT_INTERVAL = 8
+KEEPALIVE_INTERVAL = 4
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_USERNAME): vol.Coerce(str),
+    vol.Required(CONF_PASSWORD): vol.Coerce(str),
+    vol.Optional(CONF_INTERVAL, default=8): vol.All(vol.Coerce(int),
+                                                    vol.Range(min=1))
+    })
 
 
 def setup_scanner(hass, config, see):
@@ -23,63 +34,67 @@ def setup_scanner(hass, config, see):
     from pyicloud import PyiCloudService
     from pyicloud.exceptions import PyiCloudFailedLoginException
     from pyicloud.exceptions import PyiCloudNoDevicesException
+    logging.getLogger("pyicloud.base").setLevel(logging.WARNING)
 
-    # Get the username and password from the configuration.
-    username = config.get(CONF_USERNAME)
-    password = config.get(CONF_PASSWORD)
-
-    if username is None or password is None:
-        _LOGGER.error('Must specify a username and password')
-        return False
+    username = config[CONF_USERNAME]
+    password = config[CONF_PASSWORD]
 
     try:
         _LOGGER.info('Logging into iCloud Account')
         # Attempt the login to iCloud
-        api = PyiCloudService(username,
-                              password,
-                              verify=True)
+        api = PyiCloudService(username, password, verify=True)
     except PyiCloudFailedLoginException as error:
         _LOGGER.exception('Error logging into iCloud Service: %s', error)
         return False
 
     def keep_alive(now):
-        """Keep authenticating iCloud connection."""
+        """Keep authenticating iCloud connection.
+
+        The session timeouts if we are not using it so we
+        have to re-authenticate & this will send an email.
+        """
         api.authenticate()
         _LOGGER.info("Authenticate against iCloud")
 
-    track_utc_time_change(hass, keep_alive, second=0)
+    seen_devices = {}
 
     def update_icloud(now):
         """Authenticate against iCloud and scan for devices."""
         try:
-            # The session timeouts if we are not using it so we
-            # have to re-authenticate. This will send an email.
-            api.authenticate()
+            keep_alive(None)
             # Loop through every device registered with the iCloud account
             for device in api.devices:
                 status = device.status()
+                dev_id = slugify(status['name'].replace(' ', '', 99))
+
+                # An entity will not be created by see() when track=false in
+                # 'known_devices.yaml', but we need to see() it at least once
+                entity = hass.states.get(ENTITY_ID_FORMAT.format(dev_id))
+                if entity is None and dev_id in seen_devices:
+                    continue
+                seen_devices[dev_id] = True
+
                 location = device.location()
                 # If the device has a location add it. If not do nothing
                 if location:
                     see(
-                        dev_id=re.sub(r"(\s|\W|')",
-                                      '',
-                                      status['name']),
+                        dev_id=dev_id,
                         host_name=status['name'],
                         gps=(location['latitude'], location['longitude']),
                         battery=status['batteryLevel']*100,
                         gps_accuracy=location['horizontalAccuracy']
                     )
-                else:
-                    # No location found for the device so continue
-                    continue
         except PyiCloudNoDevicesException:
             _LOGGER.info('No iCloud Devices found!')
 
-    track_utc_time_change(
-        hass, update_icloud,
-        minute=range(0, 60, config.get(CONF_INTERVAL, DEFAULT_INTERVAL)),
-        second=0
-    )
+    hass.bus.listen_once(EVENT_HOMEASSISTANT_START, update_icloud)
+
+    update_minutes = list(range(0, 60, config[CONF_INTERVAL]))
+    # Schedule keepalives between the updates
+    keepalive_minutes = list(x for x in range(0, 60, KEEPALIVE_INTERVAL)
+                             if x not in update_minutes)
+
+    track_utc_time_change(hass, update_icloud, second=0, minute=update_minutes)
+    track_utc_time_change(hass, keep_alive, second=0, minute=keepalive_minutes)
 
     return True

homeassistant/components/device_tracker/locative.py

@@ -5,95 +5,92 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/device_tracker.locative/
 """
 import logging
-from functools import partial
 
 from homeassistant.components.device_tracker import DOMAIN
 from homeassistant.const import HTTP_UNPROCESSABLE_ENTITY, STATE_NOT_HOME
+from homeassistant.components.http import HomeAssistantView
 
 _LOGGER = logging.getLogger(__name__)
 
 DEPENDENCIES = ['http']
 
-URL_API_LOCATIVE_ENDPOINT = "/api/locative"
-
 
 def setup_scanner(hass, config, see):
     """Setup an endpoint for the Locative application."""
-    # POST would be semantically better, but that currently does not work
-    # since Locative sends the data as key1=value1&key2=value2
-    # in the request body, while Home Assistant expects json there.
-    hass.http.register_path(
-        'GET', URL_API_LOCATIVE_ENDPOINT,
-        partial(_handle_get_api_locative, hass, see))
+    hass.wsgi.register_view(LocativeView(hass, see))
 
     return True
 
 
-def _handle_get_api_locative(hass, see, handler, path_match, data):
-    """Locative message received."""
-    if not _check_data(handler, data):
-        return
+class LocativeView(HomeAssistantView):
+    """View to handle locative requests."""
 
-    device = data['device'].replace('-', '')
-    location_name = data['id'].lower()
-    direction = data['trigger']
+    url = "/api/locative"
+    name = "api:locative"
 
-    if direction == 'enter':
-        see(dev_id=device, location_name=location_name)
-        handler.write_text("Setting location to {}".format(location_name))
+    def __init__(self, hass, see):
+        """Initialize Locative url endpoints."""
+        super().__init__(hass)
+        self.see = see
 
-    elif direction == 'exit':
-        current_state = hass.states.get("{}.{}".format(DOMAIN, device))
+    def get(self, request):
+        """Locative message received as GET."""
+        return self.post(request)
+
+    def post(self, request):
+        """Locative message received."""
+        # pylint: disable=too-many-return-statements
+        data = request.values
+
+        if 'latitude' not in data or 'longitude' not in data:
+            return ("Latitude and longitude not specified.",
+                    HTTP_UNPROCESSABLE_ENTITY)
+
+        if 'device' not in data:
+            _LOGGER.error("Device id not specified.")
+            return ("Device id not specified.",
+                    HTTP_UNPROCESSABLE_ENTITY)
+
+        if 'id' not in data:
+            _LOGGER.error("Location id not specified.")
+            return ("Location id not specified.",
+                    HTTP_UNPROCESSABLE_ENTITY)
+
+        if 'trigger' not in data:
+            _LOGGER.error("Trigger is not specified.")
+            return ("Trigger is not specified.",
+                    HTTP_UNPROCESSABLE_ENTITY)
+
+        device = data['device'].replace('-', '')
+        location_name = data['id'].lower()
+        direction = data['trigger']
+
+        if direction == 'enter':
+            self.see(dev_id=device, location_name=location_name)
+            return "Setting location to {}".format(location_name)
+
+        elif direction == 'exit':
+            current_state = self.hass.states.get(
+                "{}.{}".format(DOMAIN, device))
+
+            if current_state is None or current_state.state == location_name:
+                self.see(dev_id=device, location_name=STATE_NOT_HOME)
+                return "Setting location to not home"
+            else:
+                # Ignore the message if it is telling us to exit a zone that we
+                # aren't currently in. This occurs when a zone is entered
+                # before the previous zone was exited. The enter message will
+                # be sent first, then the exit message will be sent second.
+                return 'Ignoring exit from {} (already in {})'.format(
+                    location_name, current_state)
+
+        elif direction == 'test':
+            # In the app, a test message can be sent. Just return something to
+            # the user to let them know that it works.
+            return "Received test message."
 
-        if current_state is None or current_state.state == location_name:
-            see(dev_id=device, location_name=STATE_NOT_HOME)
-            handler.write_text("Setting location to not home")
         else:
-            # Ignore the message if it is telling us to exit a zone that we
-            # aren't currently in. This occurs when a zone is entered before
-            # the previous zone was exited. The enter message will be sent
-            # first, then the exit message will be sent second.
-            handler.write_text(
-                'Ignoring exit from {} (already in {})'.format(
-                    location_name, current_state))
-
-    elif direction == 'test':
-        # In the app, a test message can be sent. Just return something to
-        # the user to let them know that it works.
-        handler.write_text("Received test message.")
-
-    else:
-        handler.write_text(
-            "Received unidentified message: {}".format(direction),
-            HTTP_UNPROCESSABLE_ENTITY)
-        _LOGGER.error("Received unidentified message from Locative: %s",
-                      direction)
-
-
-def _check_data(handler, data):
-    """Check the data."""
-    if 'latitude' not in data or 'longitude' not in data:
-        handler.write_text("Latitude and longitude not specified.",
-                           HTTP_UNPROCESSABLE_ENTITY)
-        _LOGGER.error("Latitude and longitude not specified.")
-        return False
-
-    if 'device' not in data:
-        handler.write_text("Device id not specified.",
-                           HTTP_UNPROCESSABLE_ENTITY)
-        _LOGGER.error("Device id not specified.")
-        return False
-
-    if 'id' not in data:
-        handler.write_text("Location id not specified.",
-                           HTTP_UNPROCESSABLE_ENTITY)
-        _LOGGER.error("Location id not specified.")
-        return False
-
-    if 'trigger' not in data:
-        handler.write_text("Trigger is not specified.",
-                           HTTP_UNPROCESSABLE_ENTITY)
-        _LOGGER.error("Trigger is not specified.")
-        return False
-
-    return True
+            _LOGGER.error("Received unidentified message from Locative: %s",
+                          direction)
+            return ("Received unidentified message: {}".format(direction),
+                    HTTP_UNPROCESSABLE_ENTITY)

homeassistant/components/device_tracker/mqtt.py

@@ -6,28 +6,27 @@ https://home-assistant.io/components/device_tracker.mqtt/
 """
 import logging
 
+import voluptuous as vol
+
 import homeassistant.components.mqtt as mqtt
-from homeassistant import util
+from homeassistant.components.mqtt import CONF_QOS
+import homeassistant.helpers.config_validation as cv
 
 DEPENDENCIES = ['mqtt']
 
-CONF_QOS = 'qos'
 CONF_DEVICES = 'devices'
 
-DEFAULT_QOS = 0
-
 _LOGGER = logging.getLogger(__name__)
 
+PLATFORM_SCHEMA = mqtt.MQTT_BASE_PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_DEVICES): {cv.string: mqtt.valid_subscribe_topic},
+})
+
 
 def setup_scanner(hass, config, see):
     """Setup the MQTT tracker."""
-    devices = config.get(CONF_DEVICES)
-    qos = util.convert(config.get(CONF_QOS), int, DEFAULT_QOS)
-
-    if not isinstance(devices, dict):
-        _LOGGER.error('Expected %s to be a dict, found %s', CONF_DEVICES,
-                      devices)
-        return False
+    devices = config[CONF_DEVICES]
+    qos = config[CONF_QOS]
 
     dev_id_lookup = {}
 

homeassistant/components/device_tracker/netgear.py

@@ -9,14 +9,15 @@ import threading
 from datetime import timedelta
 
 from homeassistant.components.device_tracker import DOMAIN
-from homeassistant.const import CONF_HOST, CONF_PASSWORD, CONF_USERNAME
+from homeassistant.const import CONF_HOST, CONF_PASSWORD, CONF_USERNAME, \
+ CONF_PORT
 from homeassistant.util import Throttle
 
 # Return cached results if last scan was less then this time ago.
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=5)
 
 _LOGGER = logging.getLogger(__name__)
-REQUIREMENTS = ['pynetgear==0.3.2']
+REQUIREMENTS = ['pynetgear==0.3.3']
 
 
 def get_scanner(hass, config):
@@ -25,12 +26,13 @@ def get_scanner(hass, config):
     host = info.get(CONF_HOST)
     username = info.get(CONF_USERNAME)
     password = info.get(CONF_PASSWORD)
+    port = info.get(CONF_PORT)
 
     if password is not None and host is None:
         _LOGGER.warning('Found username or password but no host')
         return None
 
-    scanner = NetgearDeviceScanner(host, username, password)
+    scanner = NetgearDeviceScanner(host, username, password, port)
 
     return scanner if scanner.success_init else None
 
@@ -38,7 +40,7 @@ def get_scanner(hass, config):
 class NetgearDeviceScanner(object):
     """Queries a Netgear wireless router using the SOAP-API."""
 
-    def __init__(self, host, username, password):
+    def __init__(self, host, username, password, port):
         """Initialize the scanner."""
         import pynetgear
 
@@ -49,8 +51,10 @@ class NetgearDeviceScanner(object):
             self._api = pynetgear.Netgear()
         elif username is None:
             self._api = pynetgear.Netgear(password, host)
-        else:
+        elif port is None:
             self._api = pynetgear.Netgear(password, host, username)
+        else:
+            self._api = pynetgear.Netgear(password, host, username, port)
 
         _LOGGER.info("Logging in")
 

homeassistant/components/device_tracker/nmap_tracker.py

@@ -21,10 +21,10 @@ MIN_TIME_BETWEEN_SCANS = timedelta(seconds=5)
 
 _LOGGER = logging.getLogger(__name__)
 
-# interval in minutes to exclude devices from a scan while they are home
+# Interval in minutes to exclude devices from a scan while they are home
 CONF_HOME_INTERVAL = "home_interval"
 
-REQUIREMENTS = ['python-nmap==0.6.0']
+REQUIREMENTS = ['python-nmap==0.6.1']
 
 
 def get_scanner(hass, config):

homeassistant/components/device_tracker/owntracks.py

@@ -11,6 +11,7 @@ from collections import defaultdict
 
 import homeassistant.components.mqtt as mqtt
 from homeassistant.const import STATE_HOME
+from homeassistant.util import convert, slugify
 
 DEPENDENCIES = ['mqtt']
 
@@ -33,21 +34,39 @@ def setup_scanner(hass, config, see):
     """Setup an OwnTracks tracker."""
     max_gps_accuracy = config.get(CONF_MAX_GPS_ACCURACY)
 
-    def owntracks_location_update(topic, payload, qos):
-        """MQTT message received."""
-        # Docs on available data:
-        # http://owntracks.org/booklet/tech/json/#_typelocation
+    def validate_payload(payload, data_type):
+        """Validate OwnTracks payload."""
         try:
             data = json.loads(payload)
         except ValueError:
             # If invalid JSON
-            _LOGGER.error(
-                'Unable to parse payload as JSON: %s', payload)
-            return
+            _LOGGER.error('Unable to parse payload as JSON: %s', payload)
+            return None
+        if not isinstance(data, dict) or data.get('_type') != data_type:
+            _LOGGER.debug('Skipping %s update for following data '
+                          'because of missing or malformatted data: %s',
+                          data_type, data)
+            return None
+        if max_gps_accuracy is not None and \
+                convert(data.get('acc'), float, 0.0) > max_gps_accuracy:
+            _LOGGER.debug('Skipping %s update because expected GPS '
+                          'accuracy %s is not met: %s',
+                          data_type, max_gps_accuracy, data)
+            return None
+        if convert(data.get('acc'), float, 1.0) == 0.0:
+            _LOGGER.debug('Skipping %s update because GPS accuracy'
+                          'is zero',
+                          data_type)
+            return None
 
-        if (not isinstance(data, dict) or data.get('_type') != 'location') or (
-                'acc' in data and max_gps_accuracy is not None and data[
-                    'acc'] > max_gps_accuracy):
+        return data
+
+    def owntracks_location_update(topic, payload, qos):
+        """MQTT message received."""
+        # Docs on available data:
+        # http://owntracks.org/booklet/tech/json/#_typelocation
+        data = validate_payload(payload, 'location')
+        if not data:
             return
 
         dev_id, kwargs = _parse_see_args(topic, data)
@@ -64,39 +83,36 @@ def setup_scanner(hass, config, see):
             see_beacons(dev_id, kwargs)
 
     def owntracks_event_update(topic, payload, qos):
-        # pylint: disable=too-many-branches, too-many-statements
         """MQTT event (geofences) received."""
         # Docs on available data:
         # http://owntracks.org/booklet/tech/json/#_typetransition
-        try:
-            data = json.loads(payload)
-        except ValueError:
-            # If invalid JSON
+        data = validate_payload(payload, 'transition')
+        if not data:
+            return
+
+        if data.get('desc') is None:
             _LOGGER.error(
-                'Unable to parse payload as JSON: %s', payload)
+                "Location missing from `Entering/Leaving` message - "
+                "please turn `Share` on in OwnTracks app")
             return
-
-        if not isinstance(data, dict) or data.get('_type') != 'transition':
-            return
-
         # OwnTracks uses - at the start of a beacon zone
         # to switch on 'hold mode' - ignore this
-        location = data['desc'].lstrip("-")
+        location = slugify(data['desc'].lstrip("-"))
         if location.lower() == 'home':
             location = STATE_HOME
 
         dev_id, kwargs = _parse_see_args(topic, data)
 
-        if data['event'] == 'enter':
+        def enter_event():
+            """Execute enter event."""
             zone = hass.states.get("zone.{}".format(location))
             with LOCK:
-                if zone is None:
-                    if data['t'] == 'b':
-                        # Not a HA zone, and a beacon so assume mobile
-                        beacons = MOBILE_BEACONS_ACTIVE[dev_id]
-                        if location not in beacons:
-                            beacons.append(location)
-                        _LOGGER.info("Added beacon %s", location)
+                if zone is None and data.get('t') == 'b':
+                    # Not a HA zone, and a beacon so assume mobile
+                    beacons = MOBILE_BEACONS_ACTIVE[dev_id]
+                    if location not in beacons:
+                        beacons.append(location)
+                    _LOGGER.info("Added beacon %s", location)
                 else:
                     # Normal region
                     regions = REGIONS_ENTERED[dev_id]
@@ -108,7 +124,8 @@ def setup_scanner(hass, config, see):
                 see(**kwargs)
                 see_beacons(dev_id, kwargs)
 
-        elif data['event'] == 'leave':
+        def leave_event():
+            """Execute leave event."""
             with LOCK:
                 regions = REGIONS_ENTERED[dev_id]
                 if location in regions:
@@ -140,6 +157,10 @@ def setup_scanner(hass, config, see):
                     beacons.remove(location)
                     _LOGGER.info("Remove beacon %s", location)
 
+        if data['event'] == 'enter':
+            enter_event()
+        elif data['event'] == 'leave':
+            leave_event()
         else:
             _LOGGER.error(
                 'Misformatted mqtt msgs, _type=transition, event=%s',
@@ -165,7 +186,7 @@ def setup_scanner(hass, config, see):
 def _parse_see_args(topic, data):
     """Parse the OwnTracks location parameters, into the format see expects."""
     parts = topic.split('/')
-    dev_id = '{}_{}'.format(parts[1], parts[2])
+    dev_id = slugify('{}_{}'.format(parts[1], parts[2]))
     host_name = parts[1]
     kwargs = {
         'dev_id': dev_id,

homeassistant/components/device_tracker/snmp.py

@@ -18,7 +18,7 @@ from homeassistant.util import Throttle
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
 
 _LOGGER = logging.getLogger(__name__)
-REQUIREMENTS = ['pysnmp==4.2.5']
+REQUIREMENTS = ['pysnmp==4.3.2']
 
 CONF_COMMUNITY = "community"
 CONF_BASEOID = "baseoid"
@@ -72,7 +72,7 @@ class SnmpScanner(object):
 
     @Throttle(MIN_TIME_BETWEEN_SCANS)
     def _update_info(self):
-        """Ensure the information from the WAP is up to date.
+        """Ensure the information from the device is up to date.
 
         Return boolean if scanning successful.
         """
@@ -88,7 +88,7 @@ class SnmpScanner(object):
             return True
 
     def get_snmp_data(self):
-        """Fetch MAC addresses from WAP via SNMP."""
+        """Fetch MAC addresses from access point via SNMP."""
         devices = []
 
         errindication, errstatus, errindex, restable = self.snmp.nextCmd(
@@ -97,9 +97,10 @@ class SnmpScanner(object):
         if errindication:
             _LOGGER.error("SNMPLIB error: %s", errindication)
             return
+        # pylint: disable=no-member
         if errstatus:
             _LOGGER.error('SNMP error: %s at %s', errstatus.prettyPrint(),
-                          errindex and restable[-1][int(errindex)-1] or '?')
+                          errindex and restable[int(errindex) - 1][0] or '?')
             return
 
         for resrow in restable:

homeassistant/components/device_tracker/unifi.py

@@ -12,9 +12,11 @@ from homeassistant.const import CONF_HOST, CONF_USERNAME, CONF_PASSWORD
 from homeassistant.helpers import validate_config
 
 # Unifi package doesn't list urllib3 as a requirement
-REQUIREMENTS = ['urllib3', 'unifi==1.2.4']
+REQUIREMENTS = ['urllib3', 'unifi==1.2.5']
+
 _LOGGER = logging.getLogger(__name__)
 CONF_PORT = 'port'
+CONF_SITE_ID = 'site_id'
 
 
 def get_scanner(hass, config):
@@ -31,6 +33,7 @@ def get_scanner(hass, config):
     host = this_config.get(CONF_HOST, 'localhost')
     username = this_config.get(CONF_USERNAME)
     password = this_config.get(CONF_PASSWORD)
+    site_id = this_config.get(CONF_SITE_ID, 'default')
 
     try:
         port = int(this_config.get(CONF_PORT, 8443))
@@ -39,7 +42,7 @@ def get_scanner(hass, config):
         return False
 
     try:
-        ctrl = Controller(host, username, password, port, 'v4')
+        ctrl = Controller(host, username, password, port, 'v4', site_id)
     except urllib.error.HTTPError as ex:
         _LOGGER.error('Failed to connect to unifi: %s', ex)
         return False

homeassistant/components/discovery.py

@@ -9,68 +9,31 @@ loaded before the EVENT_PLATFORM_DISCOVERED is fired.
 import logging
 import threading
 
-from homeassistant import bootstrap
-from homeassistant.const import (
-    ATTR_DISCOVERED, ATTR_SERVICE, EVENT_HOMEASSISTANT_START,
-    EVENT_PLATFORM_DISCOVERED)
+from homeassistant.const import EVENT_HOMEASSISTANT_START
+from homeassistant.helpers.discovery import load_platform, discover
 
 DOMAIN = "discovery"
-REQUIREMENTS = ['netdisco==0.5.5']
+REQUIREMENTS = ['netdisco==0.7.1']
 
 SCAN_INTERVAL = 300  # seconds
 
 SERVICE_WEMO = 'belkin_wemo'
-SERVICE_HUE = 'philips_hue'
-SERVICE_CAST = 'google_cast'
 SERVICE_NETGEAR = 'netgear_router'
-SERVICE_SONOS = 'sonos'
-SERVICE_PLEX = 'plex_mediaserver'
-SERVICE_SQUEEZEBOX = 'logitech_mediaserver'
 
 SERVICE_HANDLERS = {
-    SERVICE_WEMO: "wemo",
-    SERVICE_CAST: "media_player",
-    SERVICE_HUE: "light",
-    SERVICE_NETGEAR: 'device_tracker',
-    SERVICE_SONOS: 'media_player',
-    SERVICE_PLEX: 'media_player',
-    SERVICE_SQUEEZEBOX: 'media_player',
+    SERVICE_NETGEAR: ('device_tracker', None),
+    SERVICE_WEMO: ('wemo', None),
+    'philips_hue': ('light', 'hue'),
+    'google_cast': ('media_player', 'cast'),
+    'panasonic_viera': ('media_player', 'panasonic_viera'),
+    'plex_mediaserver': ('media_player', 'plex'),
+    'roku': ('media_player', 'roku'),
+    'sonos': ('media_player', 'sonos'),
+    'logitech_mediaserver': ('media_player', 'squeezebox'),
+    'directv': ('media_player', 'directv'),
 }
 
 
-def listen(hass, service, callback):
-    """Setup listener for discovery of specific service.
-
-    Service can be a string or a list/tuple.
-    """
-    if isinstance(service, str):
-        service = (service,)
-    else:
-        service = tuple(service)
-
-    def discovery_event_listener(event):
-        """Listen for discovery events."""
-        if event.data[ATTR_SERVICE] in service:
-            callback(event.data[ATTR_SERVICE], event.data.get(ATTR_DISCOVERED))
-
-    hass.bus.listen(EVENT_PLATFORM_DISCOVERED, discovery_event_listener)
-
-
-def discover(hass, service, discovered=None, component=None, hass_config=None):
-    """Fire discovery event. Can ensure a component is loaded."""
-    if component is not None:
-        bootstrap.setup_component(hass, component, hass_config)
-
-    data = {
-        ATTR_SERVICE: service
-    }
-
-    if discovered is not None:
-        data[ATTR_DISCOVERED] = discovered
-
-    hass.bus.fire(EVENT_PLATFORM_DISCOVERED, data)
-
-
 def setup(hass, config):
     """Start a discovery service."""
     logger = logging.getLogger(__name__)
@@ -87,20 +50,18 @@ def setup(hass, config):
         with lock:
             logger.info("Found new service: %s %s", service, info)
 
-            component = SERVICE_HANDLERS.get(service)
+            comp_plat = SERVICE_HANDLERS.get(service)
 
             # We do not know how to handle this service.
-            if not component:
+            if not comp_plat:
                 return
 
-            # This component cannot be setup.
-            if not bootstrap.setup_component(hass, component, config):
-                return
+            component, platform = comp_plat
 
-            hass.bus.fire(EVENT_PLATFORM_DISCOVERED, {
-                ATTR_SERVICE: service,
-                ATTR_DISCOVERED: info
-            })
+            if platform is None:
+                discover(hass, service, info, component, config)
+            else:
+                load_platform(hass, component, platform, info, config)
 
     # pylint: disable=unused-argument
     def start_discovery(event):

homeassistant/components/downloader.py

@@ -10,8 +10,10 @@ import re
 import threading
 
 import requests
+import voluptuous as vol
 
 from homeassistant.helpers import validate_config
+import homeassistant.helpers.config_validation as cv
 from homeassistant.util import sanitize_filename
 
 DOMAIN = "downloader"
@@ -21,6 +23,12 @@ SERVICE_DOWNLOAD_FILE = "download_file"
 ATTR_URL = "url"
 ATTR_SUBDIR = "subdir"
 
+SERVICE_DOWNLOAD_FILE_SCHEMA = vol.Schema({
+    # pylint: disable=no-value-for-parameter
+    vol.Required(ATTR_URL): vol.Url(),
+    vol.Optional(ATTR_SUBDIR): cv.string,
+})
+
 CONF_DOWNLOAD_DIR = 'download_dir'
 
 
@@ -48,10 +56,6 @@ def setup(hass, config):
 
     def download_file(service):
         """Start thread to download file specified in the URL."""
-        if ATTR_URL not in service.data:
-            logger.error("Service called but 'url' parameter not specified.")
-            return
-
         def do_download():
             """Download the file."""
             try:
@@ -127,7 +131,7 @@ def setup(hass, config):
 
         threading.Thread(target=do_download).start()
 
-    hass.services.register(DOMAIN, SERVICE_DOWNLOAD_FILE,
-                           download_file)
+    hass.services.register(DOMAIN, SERVICE_DOWNLOAD_FILE, download_file,
+                           schema=SERVICE_DOWNLOAD_FILE_SCHEMA)
 
     return True

homeassistant/components/dweet.py

@@ -0,0 +1,73 @@
+"""
+A component which allows you to send data to Dweet.io.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/dweet/
+"""
+import logging
+from datetime import timedelta
+import voluptuous as vol
+
+from homeassistant.const import EVENT_STATE_CHANGED, STATE_UNKNOWN
+import homeassistant.helpers.config_validation as cv
+from homeassistant.helpers import state as state_helper
+from homeassistant.util import Throttle
+
+
+_LOGGER = logging.getLogger(__name__)
+
+DOMAIN = "dweet"
+DEPENDENCIES = []
+
+REQUIREMENTS = ['dweepy==0.2.0']
+
+CONF_NAME = 'name'
+CONF_WHITELIST = 'whitelist'
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=1)
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Required(CONF_NAME): cv.string,
+        vol.Required(CONF_WHITELIST): cv.string,
+    }),
+}, extra=vol.ALLOW_EXTRA)
+
+
+# pylint: disable=too-many-locals
+def setup(hass, config):
+    """Setup the Dweet.io component."""
+    conf = config[DOMAIN]
+    name = conf[CONF_NAME]
+    whitelist = conf.get(CONF_WHITELIST, [])
+    json_body = {}
+
+    def dweet_event_listener(event):
+        """Listen for new messages on the bus and sends them to Dweet.io."""
+        state = event.data.get('new_state')
+        if state is None or state.state in (STATE_UNKNOWN, '') \
+                or state.entity_id not in whitelist:
+            return
+
+        try:
+            _state = state_helper.state_as_number(state)
+        except ValueError:
+            _state = state.state
+
+        json_body[state.attributes.get('friendly_name')] = _state
+
+        send_data(name, json_body)
+
+    hass.bus.listen(EVENT_STATE_CHANGED, dweet_event_listener)
+
+    return True
+
+
+@Throttle(MIN_TIME_BETWEEN_UPDATES)
+def send_data(name, msg):
+    """Send the collected data to Dweet.io."""
+    import dweepy
+    try:
+        dweepy.dweet_for(name, msg)
+    except dweepy.DweepyError:
+        _LOGGER.error("Error saving data '%s' to Dweet.io", msg)

homeassistant/components/ecobee.py

@@ -8,21 +8,18 @@ import logging
 import os
 from datetime import timedelta
 
-from homeassistant import bootstrap
-from homeassistant.const import (
-    ATTR_DISCOVERED, ATTR_SERVICE, CONF_API_KEY, EVENT_PLATFORM_DISCOVERED)
+from homeassistant.helpers import discovery
+from homeassistant.const import CONF_API_KEY
 from homeassistant.loader import get_component
 from homeassistant.util import Throttle
 
 DOMAIN = "ecobee"
-DISCOVER_THERMOSTAT = "ecobee.thermostat"
-DISCOVER_SENSORS = "ecobee.sensor"
 NETWORK = None
 HOLD_TEMP = 'hold_temp'
 
 REQUIREMENTS = [
     'https://github.com/nkgilley/python-ecobee-api/archive/'
-    '92a2f330cbaf601d0618456fdd97e5a8c42c1c47.zip#python-ecobee==0.0.4']
+    '4856a704670c53afe1882178a89c209b5f98533d.zip#python-ecobee==0.0.6']
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -70,23 +67,11 @@ def setup_ecobee(hass, network, config):
         configurator = get_component('configurator')
         configurator.request_done(_CONFIGURING.pop('ecobee'))
 
-    # Ensure component is loaded
-    bootstrap.setup_component(hass, 'thermostat', config)
-    bootstrap.setup_component(hass, 'sensor', config)
-
     hold_temp = config[DOMAIN].get(HOLD_TEMP, False)
 
-    # Fire thermostat discovery event
-    hass.bus.fire(EVENT_PLATFORM_DISCOVERED, {
-        ATTR_SERVICE: DISCOVER_THERMOSTAT,
-        ATTR_DISCOVERED: {'hold_temp': hold_temp}
-    })
-
-    # Fire sensor discovery event
-    hass.bus.fire(EVENT_PLATFORM_DISCOVERED, {
-        ATTR_SERVICE: DISCOVER_SENSORS,
-        ATTR_DISCOVERED: {}
-    })
+    discovery.load_platform(hass, 'thermostat', DOMAIN,
+                            {'hold_temp': hold_temp}, config)
+    discovery.load_platform(hass, 'sensor', DOMAIN, {}, config)
 
 
 # pylint: disable=too-few-public-methods

homeassistant/components/enocean.py

@@ -0,0 +1,117 @@
+"""
+EnOcean Component.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/EnOcean/
+"""
+
+DOMAIN = "enocean"
+
+REQUIREMENTS = ['enocean==0.31']
+
+CONF_DEVICE = "device"
+
+ENOCEAN_DONGLE = None
+
+
+def setup(hass, config):
+    """Setup the EnOcean component."""
+    global ENOCEAN_DONGLE
+
+    serial_dev = config[DOMAIN].get(CONF_DEVICE, "/dev/ttyUSB0")
+
+    ENOCEAN_DONGLE = EnOceanDongle(hass, serial_dev)
+    return True
+
+
+class EnOceanDongle:
+    """Representation of an EnOcean dongle."""
+
+    def __init__(self, hass, ser):
+        """Initialize the EnOcean dongle."""
+        from enocean.communicators.serialcommunicator import SerialCommunicator
+        self.__communicator = SerialCommunicator(port=ser,
+                                                 callback=self.callback)
+        self.__communicator.start()
+        self.__devices = []
+
+    def register_device(self, dev):
+        """Register another device."""
+        self.__devices.append(dev)
+
+    def send_command(self, command):
+        """Send a command from the EnOcean dongle."""
+        self.__communicator.send(command)
+
+    def _combine_hex(self, data):  # pylint: disable=no-self-use
+        """Combine list of integer values to one big integer."""
+        output = 0x00
+        for i, j in enumerate(reversed(data)):
+            output |= (j << i * 8)
+        return output
+
+    # pylint: disable=too-many-branches
+    def callback(self, temp):
+        """Callback function for EnOcean Device.
+
+        This is the callback function called by
+        python-enocan whenever there is an incoming
+        packet.
+        """
+        from enocean.protocol.packet import RadioPacket
+        if isinstance(temp, RadioPacket):
+            rxtype = None
+            value = None
+            if temp.data[6] == 0x30:
+                rxtype = "wallswitch"
+                value = 1
+            elif temp.data[6] == 0x20:
+                rxtype = "wallswitch"
+                value = 0
+            elif temp.data[4] == 0x0c:
+                rxtype = "power"
+                value = temp.data[3] + (temp.data[2] << 8)
+            elif temp.data[2] == 0x60:
+                rxtype = "switch_status"
+                if temp.data[3] == 0xe4:
+                    value = 1
+                elif temp.data[3] == 0x80:
+                    value = 0
+            elif temp.data[0] == 0xa5 and temp.data[1] == 0x02:
+                rxtype = "dimmerstatus"
+                value = temp.data[2]
+            for device in self.__devices:
+                if rxtype == "wallswitch" and device.stype == "listener":
+                    if temp.sender == self._combine_hex(device.dev_id):
+                        device.value_changed(value, temp.data[1])
+                if rxtype == "power" and device.stype == "powersensor":
+                    if temp.sender == self._combine_hex(device.dev_id):
+                        device.value_changed(value)
+                if rxtype == "power" and device.stype == "switch":
+                    if temp.sender == self._combine_hex(device.dev_id):
+                        if value > 10:
+                            device.value_changed(1)
+                if rxtype == "switch_status" and device.stype == "switch":
+                    if temp.sender == self._combine_hex(device.dev_id):
+                        device.value_changed(value)
+                if rxtype == "dimmerstatus" and device.stype == "dimmer":
+                    if temp.sender == self._combine_hex(device.dev_id):
+                        device.value_changed(value)
+
+
+# pylint: disable=too-few-public-methods
+class EnOceanDevice():
+    """Parent class for all devices associated with the EnOcean component."""
+
+    def __init__(self):
+        """Initialize the device."""
+        ENOCEAN_DONGLE.register_device(self)
+        self.stype = ""
+        self.sensorid = [0x00, 0x00, 0x00, 0x00]
+
+    # pylint: disable=no-self-use
+    def send_command(self, data, optional, packet_type):
+        """Send a command via the EnOcean dongle."""
+        from enocean.protocol.packet import Packet
+        packet = Packet(packet_type, data=data, optional=optional)
+        ENOCEAN_DONGLE.send_command(packet)

homeassistant/components/envisalink.py

@@ -0,0 +1,210 @@
+"""
+Support for Envisalink devices.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/envisalink/
+"""
+import logging
+import time
+import voluptuous as vol
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import EVENT_HOMEASSISTANT_STOP
+from homeassistant.helpers.entity import Entity
+from homeassistant.components.discovery import load_platform
+
+REQUIREMENTS = ['pyenvisalink==1.0', 'pydispatcher==2.0.5']
+
+_LOGGER = logging.getLogger(__name__)
+DOMAIN = 'envisalink'
+
+EVL_CONTROLLER = None
+
+CONF_EVL_HOST = 'host'
+CONF_EVL_PORT = 'port'
+CONF_PANEL_TYPE = 'panel_type'
+CONF_EVL_VERSION = 'evl_version'
+CONF_CODE = 'code'
+CONF_USERNAME = 'user_name'
+CONF_PASS = 'password'
+CONF_EVL_KEEPALIVE = 'keepalive_interval'
+CONF_ZONEDUMP_INTERVAL = 'zonedump_interval'
+CONF_ZONES = 'zones'
+CONF_PARTITIONS = 'partitions'
+
+CONF_ZONENAME = 'name'
+CONF_ZONETYPE = 'type'
+CONF_PARTITIONNAME = 'name'
+
+DEFAULT_PORT = 4025
+DEFAULT_EVL_VERSION = 3
+DEFAULT_KEEPALIVE = 60
+DEFAULT_ZONEDUMP_INTERVAL = 30
+DEFAULT_ZONETYPE = 'opening'
+
+SIGNAL_ZONE_UPDATE = 'zones_updated'
+SIGNAL_PARTITION_UPDATE = 'partition_updated'
+SIGNAL_KEYPAD_UPDATE = 'keypad_updated'
+
+ZONE_SCHEMA = vol.Schema({
+    vol.Required(CONF_ZONENAME): cv.string,
+    vol.Optional(CONF_ZONETYPE, default=DEFAULT_ZONETYPE): cv.string})
+
+PARTITION_SCHEMA = vol.Schema({
+    vol.Required(CONF_PARTITIONNAME): cv.string})
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Required(CONF_EVL_HOST): cv.string,
+        vol.Required(CONF_PANEL_TYPE):
+            vol.All(cv.string, vol.In(['HONEYWELL', 'DSC'])),
+        vol.Required(CONF_USERNAME): cv.string,
+        vol.Required(CONF_PASS): cv.string,
+        vol.Required(CONF_CODE): cv.string,
+        vol.Optional(CONF_ZONES): {vol.Coerce(int): ZONE_SCHEMA},
+        vol.Optional(CONF_PARTITIONS): {vol.Coerce(int): PARTITION_SCHEMA},
+        vol.Optional(CONF_EVL_PORT, default=DEFAULT_PORT):
+            vol.All(vol.Coerce(int), vol.Range(min=1, max=65535)),
+        vol.Optional(CONF_EVL_VERSION, default=DEFAULT_EVL_VERSION):
+            vol.All(vol.Coerce(int), vol.Range(min=3, max=4)),
+        vol.Optional(CONF_EVL_KEEPALIVE, default=DEFAULT_KEEPALIVE):
+            vol.All(vol.Coerce(int), vol.Range(min=15)),
+        vol.Optional(CONF_ZONEDUMP_INTERVAL,
+                     default=DEFAULT_ZONEDUMP_INTERVAL):
+            vol.All(vol.Coerce(int), vol.Range(min=15)),
+    }),
+}, extra=vol.ALLOW_EXTRA)
+
+
+# pylint: disable=unused-argument, too-many-function-args, too-many-locals
+# pylint: disable=too-many-return-statements
+def setup(hass, base_config):
+    """Common setup for Envisalink devices."""
+    from pyenvisalink import EnvisalinkAlarmPanel
+    from pydispatch import dispatcher
+
+    global EVL_CONTROLLER
+
+    config = base_config.get(DOMAIN)
+
+    _host = config.get(CONF_EVL_HOST)
+    _port = config.get(CONF_EVL_PORT)
+    _code = config.get(CONF_CODE)
+    _panel_type = config.get(CONF_PANEL_TYPE)
+    _version = config.get(CONF_EVL_VERSION)
+    _user = config.get(CONF_USERNAME)
+    _pass = config.get(CONF_PASS)
+    _keep_alive = config.get(CONF_EVL_KEEPALIVE)
+    _zone_dump = config.get(CONF_ZONEDUMP_INTERVAL)
+    _zones = config.get(CONF_ZONES)
+    _partitions = config.get(CONF_PARTITIONS)
+    _connect_status = {}
+    EVL_CONTROLLER = EnvisalinkAlarmPanel(_host,
+                                          _port,
+                                          _panel_type,
+                                          _version,
+                                          _user,
+                                          _pass,
+                                          _zone_dump,
+                                          _keep_alive)
+
+    def login_fail_callback(data):
+        """Callback for when the evl rejects our login."""
+        _LOGGER.error("The envisalink rejected your credentials.")
+        _connect_status['fail'] = 1
+
+    def connection_fail_callback(data):
+        """Network failure callback."""
+        _LOGGER.error("Could not establish a connection with the envisalink.")
+        _connect_status['fail'] = 1
+
+    def connection_success_callback(data):
+        """Callback for a successful connection."""
+        _LOGGER.info("Established a connection with the envisalink.")
+        _connect_status['success'] = 1
+
+    def zones_updated_callback(data):
+        """Handle zone timer updates."""
+        _LOGGER.info("Envisalink sent a zone update event.  Updating zones...")
+        dispatcher.send(signal=SIGNAL_ZONE_UPDATE,
+                        sender=None,
+                        zone=data)
+
+    def alarm_data_updated_callback(data):
+        """Handle non-alarm based info updates."""
+        _LOGGER.info("Envisalink sent new alarm info. Updating alarms...")
+        dispatcher.send(signal=SIGNAL_KEYPAD_UPDATE,
+                        sender=None,
+                        partition=data)
+
+    def partition_updated_callback(data):
+        """Handle partition changes thrown by evl (including alarms)."""
+        _LOGGER.info("The envisalink sent a partition update event.")
+        dispatcher.send(signal=SIGNAL_PARTITION_UPDATE,
+                        sender=None,
+                        partition=data)
+
+    def stop_envisalink(event):
+        """Shutdown envisalink connection and thread on exit."""
+        _LOGGER.info("Shutting down envisalink.")
+        EVL_CONTROLLER.stop()
+
+    def start_envisalink(event):
+        """Startup process for the Envisalink."""
+        EVL_CONTROLLER.start()
+        for _ in range(10):
+            if 'success' in _connect_status:
+                hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, stop_envisalink)
+                return True
+            elif 'fail' in _connect_status:
+                return False
+            else:
+                time.sleep(1)
+
+        _LOGGER.error("Timeout occurred while establishing evl connection.")
+        return False
+
+    EVL_CONTROLLER.callback_zone_timer_dump = zones_updated_callback
+    EVL_CONTROLLER.callback_zone_state_change = zones_updated_callback
+    EVL_CONTROLLER.callback_partition_state_change = partition_updated_callback
+    EVL_CONTROLLER.callback_keypad_update = alarm_data_updated_callback
+    EVL_CONTROLLER.callback_login_failure = login_fail_callback
+    EVL_CONTROLLER.callback_login_timeout = connection_fail_callback
+    EVL_CONTROLLER.callback_login_success = connection_success_callback
+
+    _result = start_envisalink(None)
+    if not _result:
+        return False
+
+    # Load sub-components for Envisalink
+    if _partitions:
+        load_platform(hass, 'alarm_control_panel', 'envisalink',
+                      {'partitions': _partitions,
+                       'code': _code}, config)
+        load_platform(hass, 'sensor', 'envisalink',
+                      {'partitions': _partitions,
+                       'code': _code}, config)
+    if _zones:
+        load_platform(hass, 'binary_sensor', 'envisalink',
+                      {'zones': _zones}, config)
+
+    return True
+
+
+class EnvisalinkDevice(Entity):
+    """Representation of an Envisalink device."""
+
+    def __init__(self, name, info, controller):
+        """Initialize the device."""
+        self._controller = controller
+        self._info = info
+        self._name = name
+
+    @property
+    def name(self):
+        """Return the name of the device."""
+        return self._name
+
+    @property
+    def should_poll(self):
+        """No polling needed."""
+        return False

homeassistant/components/feedreader.py

@@ -0,0 +1,174 @@
+"""
+Support for RSS/Atom feed.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/feedreader/
+"""
+from datetime import datetime
+from logging import getLogger
+from os.path import exists
+from threading import Lock
+import pickle
+import voluptuous as vol
+
+from homeassistant.const import EVENT_HOMEASSISTANT_START
+from homeassistant.helpers.event import track_utc_time_change
+
+REQUIREMENTS = ['feedparser==5.2.1']
+_LOGGER = getLogger(__name__)
+DOMAIN = "feedreader"
+EVENT_FEEDREADER = "feedreader"
+# pylint: disable=no-value-for-parameter
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: {
+        'urls': [vol.Url()],
+    }
+}, extra=vol.ALLOW_EXTRA)
+MAX_ENTRIES = 20
+
+
+# pylint: disable=too-few-public-methods
+class FeedManager(object):
+    """Abstraction over feedparser module."""
+
+    def __init__(self, url, hass, storage):
+        """Initialize the FeedManager object, poll every hour."""
+        self._url = url
+        self._feed = None
+        self._hass = hass
+        self._firstrun = True
+        self._storage = storage
+        self._last_entry_timestamp = None
+        self._has_published_parsed = False
+        hass.bus.listen_once(EVENT_HOMEASSISTANT_START,
+                             lambda _: self._update())
+        track_utc_time_change(hass, lambda now: self._update(),
+                              minute=0, second=0)
+
+    def _log_no_entries(self):
+        """Send no entries log at debug level."""
+        _LOGGER.debug('No new entries to be published in feed "%s"', self._url)
+
+    def _update(self):
+        """Update the feed and publish new entries to the event bus."""
+        import feedparser
+        _LOGGER.info('Fetching new data from feed "%s"', self._url)
+        self._feed = feedparser.parse(self._url,
+                                      etag=None if not self._feed
+                                      else self._feed.get('etag'),
+                                      modified=None if not self._feed
+                                      else self._feed.get('modified'))
+        if not self._feed:
+            _LOGGER.error('Error fetching feed data from "%s"', self._url)
+        else:
+            if self._feed.bozo != 0:
+                _LOGGER.error('Error parsing feed "%s"', self._url)
+            # Using etag and modified, if there's no new data available,
+            # the entries list will be empty
+            elif len(self._feed.entries) > 0:
+                _LOGGER.debug('%s entri(es) available in feed "%s"',
+                              len(self._feed.entries),
+                              self._url)
+                if len(self._feed.entries) > MAX_ENTRIES:
+                    _LOGGER.debug('Processing only the first %s entries '
+                                  'in feed "%s"', MAX_ENTRIES, self._url)
+                    self._feed.entries = self._feed.entries[0:MAX_ENTRIES]
+                self._publish_new_entries()
+                if self._has_published_parsed:
+                    self._storage.put_timestamp(self._url,
+                                                self._last_entry_timestamp)
+            else:
+                self._log_no_entries()
+        _LOGGER.info('Fetch from feed "%s" completed', self._url)
+
+    def _update_and_fire_entry(self, entry):
+        """Update last_entry_timestamp and fire entry."""
+        # We are lucky, `published_parsed` data available,
+        # let's make use of it to publish only new available
+        # entries since the last run
+        if 'published_parsed' in entry.keys():
+            self._has_published_parsed = True
+            self._last_entry_timestamp = max(entry.published_parsed,
+                                             self._last_entry_timestamp)
+        else:
+            self._has_published_parsed = False
+            _LOGGER.debug('No `published_parsed` info available '
+                          'for entry "%s"', entry.title)
+        entry.update({'feed_url': self._url})
+        self._hass.bus.fire(EVENT_FEEDREADER, entry)
+
+    def _publish_new_entries(self):
+        """Publish new entries to the event bus."""
+        new_entries = False
+        self._last_entry_timestamp = self._storage.get_timestamp(self._url)
+        if self._last_entry_timestamp:
+            self._firstrun = False
+        else:
+            # Set last entry timestamp as epoch time if not available
+            self._last_entry_timestamp = \
+                datetime.utcfromtimestamp(0).timetuple()
+        for entry in self._feed.entries:
+            if self._firstrun or (
+                    'published_parsed' in entry.keys() and
+                    entry.published_parsed > self._last_entry_timestamp):
+                self._update_and_fire_entry(entry)
+                new_entries = True
+            else:
+                _LOGGER.debug('Entry "%s" already processed', entry.title)
+        if not new_entries:
+            self._log_no_entries()
+        self._firstrun = False
+
+
+class StoredData(object):
+    """Abstraction over pickle data storage."""
+
+    def __init__(self, data_file):
+        """Initialize pickle data storage."""
+        self._data_file = data_file
+        self._lock = Lock()
+        self._cache_outdated = True
+        self._data = {}
+        self._fetch_data()
+
+    def _fetch_data(self):
+        """Fetch data stored into pickle file."""
+        if self._cache_outdated and exists(self._data_file):
+            try:
+                _LOGGER.debug('Fetching data from file %s', self._data_file)
+                with self._lock, open(self._data_file, 'rb') as myfile:
+                    self._data = pickle.load(myfile) or {}
+                    self._cache_outdated = False
+            # pylint: disable=bare-except
+            except:
+                _LOGGER.error('Error loading data from pickled file %s',
+                              self._data_file)
+
+    def get_timestamp(self, url):
+        """Return stored timestamp for given url."""
+        self._fetch_data()
+        return self._data.get(url)
+
+    def put_timestamp(self, url, timestamp):
+        """Update timestamp for given url."""
+        self._fetch_data()
+        with self._lock, open(self._data_file, 'wb') as myfile:
+            self._data.update({url: timestamp})
+            _LOGGER.debug('Overwriting feed "%s" timestamp in storage file %s',
+                          url, self._data_file)
+            try:
+                pickle.dump(self._data, myfile)
+            # pylint: disable=bare-except
+            except:
+                _LOGGER.error('Error saving pickled data to %s',
+                              self._data_file)
+        self._cache_outdated = True
+
+
+def setup(hass, config):
+    """Setup the feedreader component."""
+    urls = config.get(DOMAIN)['urls']
+    data_file = hass.config.path("{}.pickle".format(DOMAIN))
+    storage = StoredData(data_file)
+    feeds = [FeedManager(url, hass, storage) for url in urls]
+    return len(feeds) > 0

homeassistant/components/foursquare.py

@@ -0,0 +1,99 @@
+"""
+Allows utilizing the Foursquare (Swarm) API.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/foursquare/
+"""
+import logging
+import os
+import json
+import requests
+
+import voluptuous as vol
+
+from homeassistant.config import load_yaml_config_file
+import homeassistant.helpers.config_validation as cv
+from homeassistant.components.http import HomeAssistantView
+
+DOMAIN = "foursquare"
+
+SERVICE_CHECKIN = "checkin"
+
+EVENT_PUSH = "foursquare.push"
+EVENT_CHECKIN = "foursquare.checkin"
+
+CHECKIN_SERVICE_SCHEMA = vol.Schema({
+    vol.Required("venueId"): cv.string,
+    vol.Optional("eventId"): cv.string,
+    vol.Optional("shout"): cv.string,
+    vol.Optional("mentions"): cv.string,
+    vol.Optional("broadcast"): cv.string,
+    vol.Optional("ll"): cv.string,
+    vol.Optional("llAcc"): cv.string,
+    vol.Optional("alt"): cv.string,
+    vol.Optional("altAcc"): cv.string,
+})
+
+_LOGGER = logging.getLogger(__name__)
+
+DEPENDENCIES = ["http"]
+
+
+def setup(hass, config):
+    """Setup the Foursquare component."""
+    descriptions = load_yaml_config_file(
+        os.path.join(os.path.dirname(__file__), "services.yaml"))
+
+    config = config[DOMAIN]
+
+    def checkin_user(call):
+        """Check a user in on Swarm."""
+        url = ("https://api.foursquare.com/v2/checkins/add"
+               "?oauth_token={}"
+               "&v=20160802"
+               "&m=swarm").format(config["access_token"])
+        response = requests.post(url, data=call.data, timeout=10)
+
+        if response.status_code not in (200, 201):
+            _LOGGER.exception(
+                "Error checking in user. Response %d: %s:",
+                response.status_code, response.reason)
+
+        hass.bus.fire(EVENT_CHECKIN, response.text)
+
+    # Register our service with Home Assistant.
+    hass.services.register(DOMAIN, "checkin", checkin_user,
+                           descriptions[DOMAIN][SERVICE_CHECKIN],
+                           schema=CHECKIN_SERVICE_SCHEMA)
+
+    hass.wsgi.register_view(FoursquarePushReceiver(hass,
+                                                   config["push_secret"]))
+
+    return True
+
+
+class FoursquarePushReceiver(HomeAssistantView):
+    """Handle pushes from the Foursquare API."""
+
+    requires_auth = False
+    url = "/api/foursquare"
+    name = "foursquare"
+
+    def __init__(self, hass, push_secret):
+        """Initialize the OAuth callback view."""
+        super().__init__(hass)
+        self.push_secret = push_secret
+
+    def post(self, request):
+        """Accept the POST from Foursquare."""
+        raw_data = request.form
+        _LOGGER.debug("Received Foursquare push: %s", raw_data)
+        if self.push_secret != raw_data["secret"]:
+            _LOGGER.error("Received Foursquare push with invalid"
+                          "push secret! Data: %s", raw_data)
+            return
+        parsed_payload = {
+            key: json.loads(val) for key, val in raw_data.items()
+            if key != "secret"
+        }
+        self.hass.bus.fire(EVENT_PUSH, parsed_payload)

homeassistant/components/frontend/__init__.py

@@ -1,123 +1,201 @@
 """Handle the frontend for Home Assistant."""
-import re
-import os
+import hashlib
 import logging
+import os
 
-from . import version, mdi_version
-import homeassistant.util as util
-from homeassistant.const import URL_ROOT, HTTP_OK
+from homeassistant.const import EVENT_HOMEASSISTANT_START
 from homeassistant.components import api
+from homeassistant.components.http import HomeAssistantView
+from .version import FINGERPRINTS
 
 DOMAIN = 'frontend'
 DEPENDENCIES = ['api']
+URL_PANEL_COMPONENT = '/frontend/panels/{}.html'
+URL_PANEL_COMPONENT_FP = '/frontend/panels/{}-{}.html'
+STATIC_PATH = os.path.join(os.path.dirname(__file__), 'www_static')
+PANELS = {}
 
-INDEX_PATH = os.path.join(os.path.dirname(__file__), 'index.html.template')
-
+# To keep track we don't register a component twice (gives a warning)
+_REGISTERED_COMPONENTS = set()
 _LOGGER = logging.getLogger(__name__)
 
-FRONTEND_URLS = [
-    URL_ROOT, '/logbook', '/history', '/map', '/devService', '/devState',
-    '/devEvent', '/devInfo', '/devTemplate',
-    re.compile(r'/states(/([a-zA-Z\._\-0-9/]+)|)'),
-]
 
-URL_API_BOOTSTRAP = "/api/bootstrap"
+def register_built_in_panel(hass, component_name, sidebar_title=None,
+                            sidebar_icon=None, url_path=None, config=None):
+    """Register a built-in panel."""
+    # pylint: disable=too-many-arguments
+    path = 'panels/ha-panel-{}.html'.format(component_name)
 
-_FINGERPRINT = re.compile(r'^(\w+)-[a-z0-9]{32}\.(\w+)$', re.IGNORECASE)
+    if hass.wsgi.development:
+        url = ('/static/home-assistant-polymer/panels/'
+               '{0}/ha-panel-{0}.html'.format(component_name))
+    else:
+        url = None  # use default url generate mechanism
+
+    register_panel(hass, component_name, os.path.join(STATIC_PATH, path),
+                   FINGERPRINTS[path], sidebar_title, sidebar_icon, url_path,
+                   url, config)
+
+
+def register_panel(hass, component_name, path, md5=None, sidebar_title=None,
+                   sidebar_icon=None, url_path=None, url=None, config=None):
+    """Register a panel for the frontend.
+
+    component_name: name of the web component
+    path: path to the HTML of the web component
+    md5: the md5 hash of the web component (for versioning, optional)
+    sidebar_title: title to show in the sidebar (optional)
+    sidebar_icon: icon to show next to title in sidebar (optional)
+    url_path: name to use in the url (defaults to component_name)
+    url: for the web component (for dev environment, optional)
+    config: config to be passed into the web component
+
+    Warning: this API will probably change. Use at own risk.
+    """
+    # pylint: disable=too-many-arguments
+    if url_path is None:
+        url_path = component_name
+
+    if url_path in PANELS:
+        _LOGGER.warning('Overwriting component %s', url_path)
+    if not os.path.isfile(path):
+        _LOGGER.error('Panel %s component does not exist: %s',
+                      component_name, path)
+        return
+
+    if md5 is None:
+        with open(path) as fil:
+            md5 = hashlib.md5(fil.read().encode('utf-8')).hexdigest()
+
+    data = {
+        'url_path': url_path,
+        'component_name': component_name,
+    }
+
+    if sidebar_title:
+        data['title'] = sidebar_title
+    if sidebar_icon:
+        data['icon'] = sidebar_icon
+    if config is not None:
+        data['config'] = config
+
+    if url is not None:
+        data['url'] = url
+    else:
+        url = URL_PANEL_COMPONENT.format(component_name)
+
+        if url not in _REGISTERED_COMPONENTS:
+            hass.wsgi.register_static_path(url, path)
+            _REGISTERED_COMPONENTS.add(url)
+
+        fprinted_url = URL_PANEL_COMPONENT_FP.format(component_name, md5)
+        data['url'] = fprinted_url
+
+    PANELS[url_path] = data
 
 
 def setup(hass, config):
     """Setup serving the frontend."""
-    for url in FRONTEND_URLS:
-        hass.http.register_path('GET', url, _handle_get_root, False)
+    hass.wsgi.register_view(BootstrapView)
 
-    hass.http.register_path('GET', '/service_worker.js',
-                            _handle_get_service_worker, False)
-
-    # Bootstrap API
-    hass.http.register_path(
-        'GET', URL_API_BOOTSTRAP, _handle_get_api_bootstrap)
-
-    # Static files
-    hass.http.register_path(
-        'GET', re.compile(r'/static/(?P<file>[a-zA-Z\._\-0-9/]+)'),
-        _handle_get_static, False)
-    hass.http.register_path(
-        'HEAD', re.compile(r'/static/(?P<file>[a-zA-Z\._\-0-9/]+)'),
-        _handle_get_static, False)
-    hass.http.register_path(
-        'GET', re.compile(r'/local/(?P<file>[a-zA-Z\._\-0-9/]+)'),
-        _handle_get_local, False)
-
-    return True
-
-
-def _handle_get_api_bootstrap(handler, path_match, data):
-    """Return all data needed to bootstrap Home Assistant."""
-    hass = handler.server.hass
-
-    handler.write_json({
-        'config': hass.config.as_dict(),
-        'states': hass.states.all(),
-        'events': api.events_json(hass),
-        'services': api.services_json(hass),
-    })
-
-
-def _handle_get_root(handler, path_match, data):
-    """Render the frontend."""
-    handler.send_response(HTTP_OK)
-    handler.send_header('Content-type', 'text/html; charset=utf-8')
-    handler.end_headers()
-
-    if handler.server.development:
-        app_url = "home-assistant-polymer/src/home-assistant.html"
-    else:
-        app_url = "frontend-{}.html".format(version.VERSION)
-
-    # auto login if no password was set, else check api_password param
-    auth = ('no_password_set' if handler.server.api_password is None
-            else data.get('api_password', ''))
-
-    with open(INDEX_PATH) as template_file:
-        template_html = template_file.read()
-
-    template_html = template_html.replace('{{ app_url }}', app_url)
-    template_html = template_html.replace('{{ auth }}', auth)
-    template_html = template_html.replace('{{ icons }}', mdi_version.VERSION)
-
-    handler.wfile.write(template_html.encode("UTF-8"))
-
-
-def _handle_get_service_worker(handler, path_match, data):
-    """Return service worker for the frontend."""
-    if handler.server.development:
+    if hass.wsgi.development:
         sw_path = "home-assistant-polymer/build/service_worker.js"
     else:
         sw_path = "service_worker.js"
 
-    handler.write_file(os.path.join(os.path.dirname(__file__), 'www_static',
-                                    sw_path))
+    hass.wsgi.register_static_path("/service_worker.js",
+                                   os.path.join(STATIC_PATH, sw_path), 0)
+    hass.wsgi.register_static_path("/robots.txt",
+                                   os.path.join(STATIC_PATH, "robots.txt"))
+    hass.wsgi.register_static_path("/static", STATIC_PATH)
+    hass.wsgi.register_static_path("/local", hass.config.path('www'))
+
+    register_built_in_panel(hass, 'map', 'Map', 'mdi:account-location')
+
+    for panel in ('dev-event', 'dev-info', 'dev-service', 'dev-state',
+                  'dev-template'):
+        register_built_in_panel(hass, panel)
+
+    def register_frontend_index(event):
+        """Register the frontend index urls.
+
+        Done when Home Assistant is started so that all panels are known.
+        """
+        hass.wsgi.register_view(IndexView(
+            hass, ['/{}'.format(name) for name in PANELS]))
+
+    hass.bus.listen_once(EVENT_HOMEASSISTANT_START, register_frontend_index)
+
+    return True
 
 
-def _handle_get_static(handler, path_match, data):
-    """Return a static file for the frontend."""
-    req_file = util.sanitize_path(path_match.group('file'))
+class BootstrapView(HomeAssistantView):
+    """View to bootstrap frontend with all needed data."""
 
-    # Strip md5 hash out
-    fingerprinted = _FINGERPRINT.match(req_file)
-    if fingerprinted:
-        req_file = "{}.{}".format(*fingerprinted.groups())
+    url = "/api/bootstrap"
+    name = "api:bootstrap"
 
-    path = os.path.join(os.path.dirname(__file__), 'www_static', req_file)
-
-    handler.write_file(path)
+    def get(self, request):
+        """Return all data needed to bootstrap Home Assistant."""
+        return self.json({
+            'config': self.hass.config.as_dict(),
+            'states': self.hass.states.all(),
+            'events': api.events_json(self.hass),
+            'services': api.services_json(self.hass),
+            'panels': PANELS,
+        })
 
 
-def _handle_get_local(handler, path_match, data):
-    """Return a static file from the hass.config.path/www for the frontend."""
-    req_file = util.sanitize_path(path_match.group('file'))
+class IndexView(HomeAssistantView):
+    """Serve the frontend."""
 
-    path = handler.server.hass.config.path('www', req_file)
+    url = '/'
+    name = "frontend:index"
+    requires_auth = False
+    extra_urls = ['/states', '/states/<entity:entity_id>']
 
-    handler.write_file(path)
+    def __init__(self, hass, extra_urls):
+        """Initialize the frontend view."""
+        super().__init__(hass)
+
+        from jinja2 import FileSystemLoader, Environment
+
+        self.extra_urls = self.extra_urls + extra_urls
+        self.templates = Environment(
+            loader=FileSystemLoader(
+                os.path.join(os.path.dirname(__file__), 'templates/')
+            )
+        )
+
+    def get(self, request, entity_id=None):
+        """Serve the index view."""
+        if self.hass.wsgi.development:
+            core_url = '/static/home-assistant-polymer/build/core.js'
+            ui_url = '/static/home-assistant-polymer/src/home-assistant.html'
+        else:
+            core_url = '/static/core-{}.js'.format(
+                FINGERPRINTS['core.js'])
+            ui_url = '/static/frontend-{}.html'.format(
+                FINGERPRINTS['frontend.html'])
+
+        if request.path == '/':
+            panel = 'states'
+        else:
+            panel = request.path.split('/')[1]
+
+        panel_url = PANELS[panel]['url'] if panel != 'states' else ''
+
+        # auto login if no password was set
+        no_auth = 'false' if self.hass.config.api.api_password else 'true'
+
+        icons_url = '/static/mdi-{}.html'.format(FINGERPRINTS['mdi.html'])
+        template = self.templates.get_template('index.html')
+
+        # pylint is wrong
+        # pylint: disable=no-member
+        resp = template.render(
+            core_url=core_url, ui_url=ui_url, no_auth=no_auth,
+            icons_url=icons_url, icons=FINGERPRINTS['mdi.html'],
+            panel_url=panel_url, panels=PANELS)
+
+        return self.Response(resp, mimetype='text/html')

homeassistant/components/frontend/index.html.template

@@ -1,51 +0,0 @@
-<!doctype html>
-<html lang="en">
-  <head>
-    <meta charset="utf-8">
-    <title>Home Assistant</title>
-
-    <link rel='manifest' href='/static/manifest.json'>
-    <link rel='icon' href='/static/favicon.ico'>
-    <link rel='apple-touch-icon' sizes='180x180'
-          href='/static/favicon-apple-180x180.png'>
-    <meta name='apple-mobile-web-app-capable' content='yes'>
-    <meta name='mobile-web-app-capable' content='yes'>
-    <meta name='viewport' content='width=device-width, user-scalable=no'>
-    <meta name='theme-color' content='#03a9f4'>
-    <style>
-      #ha-init-skeleton {
-        display: -webkit-flex;
-        display: flex;
-        -webkit-flex-direction: column;
-        -webkit-justify-content: center;
-        -webkit-align-items: center;
-        flex-direction: column;
-        justify-content: center;
-        align-items: center;
-        text-align: center;
-        position: fixed;
-        top: 0;
-        left: 0;
-        right: 0;
-        bottom: 0;
-        margin-bottom: 123px;
-      }
-    </style>
-    <link rel='import' href='/static/{{ app_url }}' async>
-  </head>
-  <body fullbleed>
-    <div id='ha-init-skeleton'><img src='/static/favicon-192x192.png' height='192'></div>
-    <script>
-      var webComponentsSupported = ('registerElement' in document &&
-                                    'import' in document.createElement('link') &&
-                                    'content' in document.createElement('template'))
-      if (!webComponentsSupported) {
-        var script = document.createElement('script')
-        script.async = true
-        script.src = '/static/webcomponents-lite.min.js'
-        document.head.appendChild(script)
-      }
-    </script>
-    <home-assistant auth='{{ auth }}' icons='{{ icons }}'></home-assistant>
-  </body>
-</html>

homeassistant/components/frontend/mdi_version.py

@@ -1,2 +0,0 @@
-"""DO NOT MODIFY. Auto-generated by update_mdi script."""
-VERSION = "df49e6b7c930eb39b42ff1909712e95e"

homeassistant/components/frontend/templates/index.html

@@ -0,0 +1,110 @@
+<!doctype html>
+<html lang="en">
+  <head>
+    <meta charset="utf-8">
+    <title>Home Assistant</title>
+
+    <link rel='manifest' href='/static/manifest.json'>
+    <link rel='icon' href='/static/icons/favicon.ico'>
+    <link rel='apple-touch-icon' sizes='180x180'
+          href='/static/icons/favicon-apple-180x180.png'>
+    {% for panel in panels.values() -%}
+      <link rel='prefetch' href='{{ panel.url }}'>
+    {% endfor -%}
+    <meta name='apple-mobile-web-app-capable' content='yes'>
+    <meta name="msapplication-square70x70logo" content="/static/icons/tile-win-70x70.png"/>
+    <meta name="msapplication-square150x150logo" content="/static/icons/tile-win-150x150.png"/>
+    <meta name="msapplication-wide310x150logo" content="/static/icons/tile-win-310x150.png"/>
+    <meta name="msapplication-square310x310logo" content="/static/icons/tile-win-310x310.png"/>
+    <meta name="msapplication-TileColor" content="#3fbbf4ff"/>
+    <meta name='mobile-web-app-capable' content='yes'>
+    <meta name='viewport' content='width=device-width, user-scalable=no'>
+    <meta name='theme-color' content='#03a9f4'>
+    <style>
+      body {
+        font-family: 'Roboto', 'Noto', sans-serif;
+        font-weight: 300;
+        -webkit-font-smoothing: antialiased;
+        text-rendering: optimizeLegibility;
+      }
+
+      #ha-init-skeleton {
+        display: -webkit-flex;
+        display: flex;
+        -webkit-flex-direction: column;
+        -webkit-justify-content: center;
+        -webkit-align-items: center;
+        flex-direction: column;
+        justify-content: center;
+        align-items: center;
+        text-align: center;
+        position: fixed;
+        top: 0;
+        left: 0;
+        right: 0;
+        bottom: 0;
+        margin-bottom: 83px;
+        font-family: Roboto, sans-serif;
+        font-size: 0pt;
+        transition: font-size 2s;
+      }
+
+      #ha-init-skeleton paper-spinner {
+        height: 28px;
+        margin-top: 16px;
+      }
+
+      #ha-init-skeleton a {
+        color: #03A9F4;
+        text-decoration: none;
+        font-weight: bold;
+      }
+
+      #ha-init-skeleton.error {
+        font-size: 16px;
+      }
+
+      #ha-init-skeleton.error img,
+      #ha-init-skeleton.error paper-spinner {
+        display: none;
+      }
+    </style>
+    <script>
+      function initError() {
+        document
+          .getElementById('ha-init-skeleton')
+          .classList.add('error');
+      };
+      window.noAuth = {{ no_auth }};
+      window.Polymer = {lazyRegister: true, useNativeCSSProperties: true, dom: 'shady'};
+    </script>
+  </head>
+  <body>
+    <div id='ha-init-skeleton'>
+      <img src='/static/icons/favicon-192x192.png' height='192'>
+      <paper-spinner active></paper-spinner>
+      Home Assistant had trouble<br>connecting to the server.<br><br><a href='/'>TRY AGAIN</a>
+    </div>
+    <home-assistant icons='{{ icons }}'></home-assistant>
+    {# <script src='/static/home-assistant-polymer/build/_demo_data_compiled.js'></script> #}
+    <script src='{{ core_url }}'></script>
+    <link rel='import' href='{{ ui_url }}' onerror='initError()'>
+    {% if panel_url -%}
+      <link rel='import' href='{{ panel_url }}' onerror='initError()' async>
+    {% endif -%}
+    <link rel='import' href='{{ icons_url }}' async>
+    <script>
+      var webComponentsSupported = (
+        'registerElement' in document &&
+        'import' in document.createElement('link') &&
+        'content' in document.createElement('template'));
+      if (!webComponentsSupported) {
+        var e = document.createElement('script');
+        e.async = true;
+        e.onerror = initError;
+        e.src = '/static/webcomponents-lite.min.js';
+        document.head.appendChild(e);
+      }
+    </script>
+  </body>
+</html>

homeassistant/components/frontend/version.py

@@ -1,2 +1,16 @@
-"""DO NOT MODIFY. Auto-generated by build_frontend script."""
-VERSION = "49974cb3bb443751f7548e4e3b353304"
+"""DO NOT MODIFY. Auto-generated by script/fingerprint_frontend."""
+
+FINGERPRINTS = {
+    "core.js": "457d5acd123e7dc38947c07984b3a5e8",
+    "frontend.html": "829ee7cb591b8a63d7f22948a7aeb07a",
+    "mdi.html": "b399b5d3798f5b68b0a4fbaae3432d48",
+    "panels/ha-panel-dev-event.html": "3cc881ae8026c0fba5aa67d334a3ab2b",
+    "panels/ha-panel-dev-info.html": "34e2df1af32e60fffcafe7e008a92169",
+    "panels/ha-panel-dev-service.html": "bb5c587ada694e0fd42ceaaedd6fe6aa",
+    "panels/ha-panel-dev-state.html": "4608326978256644c42b13940c028e0a",
+    "panels/ha-panel-dev-template.html": "0a099d4589636ed3038a3e9f020468a7",
+    "panels/ha-panel-history.html": "efe1bcdd7733b09e55f4f965d171c295",
+    "panels/ha-panel-iframe.html": "d920f0aa3c903680f2f8795e2255daab",
+    "panels/ha-panel-logbook.html": "66108d82763359a218c9695f0553de40",
+    "panels/ha-panel-map.html": "af7d04aff7dd5479c5a0016bc8d4dd7d"
+}

homeassistant/components/frontend/www_static/fonts/roboto/COPYRIGHT.txt

@@ -0,0 +1 @@
+Copyright 2011 Google Inc. All Rights Reserved.

homeassistant/components/frontend/www_static/fonts/roboto/DESCRIPTION.en_us.html

@@ -0,0 +1,17 @@
+<p>Roboto has a dual nature. It has a mechanical skeleton and the forms are
+largely geometric. At the same time, the font features friendly and open
+curves. While some grotesks distort their letterforms to force a rigid rhythm,
+Roboto doesn’t compromise, allowing letters to be settled into their natural
+width. This makes for a more natural reading rhythm more commonly found in
+humanist and serif types.</p>
+
+<p>This is the normal family, which can be used alongside the
+<a href="http://www.google.com/fonts/specimen/Roboto+Condensed">Roboto Condensed</a> family and the 
+<a href="http://www.google.com/fonts/specimen/Roboto+Slab">Roboto Slab</a> family.</p>
+
+<p>
+<b>Updated January 14 2015:</b>
+Christian Robertson and the Material Design team unveiled the latest version of Roboto at Google I/O last year, and it is now available from Google Fonts. 
+Existing websites using Roboto via Google Fonts will start using the latest version automatically. 
+If you have installed the fonts on your computer, please download them again and re-install.
+</p>