Bump release to 0.61.0

Merge pull request #11589 from home-assistant/release-0-61
0.61
2018-01-15 13:27:54 +01:00 · 2018-01-15 10:35:00 +01:00 · 2018-01-15 09:38:08 +01:00 · 2018-01-15 09:38:07 +01:00 · 2018-01-15 09:38:07 +01:00 · 2018-01-15 09:38:06 +01:00
370 changed files with 11224 additions and 4045 deletions
@@ -50,9 +50,15 @@ omit =
    homeassistant/components/bloomsky.py
    homeassistant/components/*/bloomsky.py

+    homeassistant/components/coinbase.py
+    homeassistant/components/sensor/coinbase.py
+
    homeassistant/components/comfoconnect.py
    homeassistant/components/*/comfoconnect.py

+    homeassistant/components/deconz/*
+    homeassistant/components/*/deconz.py
+
    homeassistant/components/digital_ocean.py
    homeassistant/components/*/digital_ocean.py

@@ -263,6 +269,9 @@ omit =
    homeassistant/components/zoneminder.py
    homeassistant/components/*/zoneminder.py

+    homeassistant/components/daikin.py
+    homeassistant/components/*/daikin.py
+
    homeassistant/components/alarm_control_panel/alarmdotcom.py
    homeassistant/components/alarm_control_panel/canary.py
    homeassistant/components/alarm_control_panel/concord232.py
@@ -296,6 +305,7 @@ omit =
    homeassistant/components/camera/rpi_camera.py
    homeassistant/components/camera/synology.py
    homeassistant/components/camera/yi.py
+    homeassistant/components/climate/econet.py
    homeassistant/components/climate/ephember.py
    homeassistant/components/climate/eq3btsmart.py
    homeassistant/components/climate/flexit.py
@@ -307,6 +317,7 @@ omit =
    homeassistant/components/climate/proliphix.py
    homeassistant/components/climate/radiotherm.py
    homeassistant/components/climate/sensibo.py
+    homeassistant/components/climate/touchline.py
    homeassistant/components/cover/garadget.py
    homeassistant/components/cover/homematic.py
    homeassistant/components/cover/knx.py
@@ -365,8 +376,10 @@ omit =
    homeassistant/components/light/decora.py
    homeassistant/components/light/decora_wifi.py
    homeassistant/components/light/flux_led.py
+    homeassistant/components/light/greenwave.py
    homeassistant/components/light/hue.py
    homeassistant/components/light/hyperion.py
+    homeassistant/components/light/iglo.py
    homeassistant/components/light/lifx.py
    homeassistant/components/light/lifx_legacy.py
    homeassistant/components/light/limitlessled.py
@@ -476,6 +489,7 @@ omit =
    homeassistant/components/notify/yessssms.py
    homeassistant/components/nuimo_controller.py
    homeassistant/components/prometheus.py
+    homeassistant/components/rainbird.py
    homeassistant/components/remember_the_milk/__init__.py
    homeassistant/components/remote/harmony.py
    homeassistant/components/remote/itach.py
@@ -504,6 +518,7 @@ omit =
    homeassistant/components/sensor/deluge.py
    homeassistant/components/sensor/deutsche_bahn.py
    homeassistant/components/sensor/dht.py
+    homeassistant/components/sensor/discogs.py
    homeassistant/components/sensor/dnsip.py
    homeassistant/components/sensor/dovado.py
    homeassistant/components/sensor/dte_energy_bridge.py
@@ -517,7 +532,6 @@ omit =
    homeassistant/components/sensor/etherscan.py
    homeassistant/components/sensor/fastdotcom.py
    homeassistant/components/sensor/fedex.py
-    homeassistant/components/sensor/fido.py
    homeassistant/components/sensor/fitbit.py
    homeassistant/components/sensor/fixer.py
    homeassistant/components/sensor/fritzbox_callmonitor.py
@@ -532,7 +546,6 @@ omit =
    homeassistant/components/sensor/haveibeenpwned.py
    homeassistant/components/sensor/hp_ilo.py
    homeassistant/components/sensor/htu21d.py
-    homeassistant/components/sensor/hydroquebec.py
    homeassistant/components/sensor/imap.py
    homeassistant/components/sensor/imap_email_content.py
    homeassistant/components/sensor/influxdb.py
@@ -570,6 +583,7 @@ omit =
    homeassistant/components/sensor/pyload.py
    homeassistant/components/sensor/qnap.py
    homeassistant/components/sensor/radarr.py
+    homeassistant/components/sensor/rainbird.py
    homeassistant/components/sensor/ripple.py
    homeassistant/components/sensor/sabnzbd.py
    homeassistant/components/sensor/scrape.py
@@ -580,6 +594,7 @@ omit =
    homeassistant/components/sensor/skybeacon.py
    homeassistant/components/sensor/sma.py
    homeassistant/components/sensor/snmp.py
+    homeassistant/components/sensor/sochain.py
    homeassistant/components/sensor/sonarr.py
    homeassistant/components/sensor/speedtest.py
    homeassistant/components/sensor/steam_online.py
@@ -648,9 +663,9 @@ omit =
    homeassistant/components/vacuum/xiaomi_miio.py
    homeassistant/components/weather/bom.py
    homeassistant/components/weather/buienradar.py
+    homeassistant/components/weather/darksky.py
    homeassistant/components/weather/metoffice.py
    homeassistant/components/weather/openweathermap.py
-    homeassistant/components/weather/yweather.py
    homeassistant/components/weather/zamg.py
    homeassistant/components/zeroconf.py
    homeassistant/components/zwave/util.py
@@ -11,6 +11,7 @@
 ```

 ## Checklist:
+  - [ ] The code change is tested and works locally.

 If user exposed functionality or configuration variables are added/changed:
  - [ ] Documentation added/updated in [home-assistant.github.io](https://github.com/home-assistant/home-assistant.github.io)
@@ -74,6 +74,7 @@ pip-selfcheck.json
 venv
 .venv
 Pipfile*
+share/*

 # vimmy stuff
 *.swp
@@ -53,10 +53,11 @@ homeassistant/components/light/yeelight.py @rytilahti
 homeassistant/components/media_player/kodi.py @armills
 homeassistant/components/media_player/monoprice.py @etsinko
 homeassistant/components/media_player/yamaha_musiccast.py @jalmeroth
+homeassistant/components/plant.py @ChristianKuehnel
 homeassistant/components/sensor/airvisual.py @bachya
 homeassistant/components/sensor/gearbest.py @HerrHofrat
 homeassistant/components/sensor/irish_rail_transport.py @ttroy50
-homeassistant/components/sensor/miflora.py @danielhiversen
+homeassistant/components/sensor/miflora.py @danielhiversen @ChristianKuehnel
 homeassistant/components/sensor/sytadin.py @gautric
 homeassistant/components/sensor/tibber.py @danielhiversen
 homeassistant/components/sensor/waqi.py @andrey-git
@@ -64,9 +65,11 @@ homeassistant/components/switch/rainmachine.py @bachya
 homeassistant/components/switch/tplink.py @rytilahti
 homeassistant/components/xiaomi_aqara.py @danielhiversen @syssi

+homeassistant/components/*/axis.py @kane610
 homeassistant/components/*/broadlink.py @danielhiversen
 homeassistant/components/hive.py @Rendili @KJonline
 homeassistant/components/*/hive.py @Rendili @KJonline
+homeassistant/components/*/deconz.py @kane610
 homeassistant/components/*/rfxtrx.py @danielhiversen
 homeassistant/components/velux.py @Julius2342
 homeassistant/components/*/velux.py @Julius2342
@@ -10,7 +10,6 @@ Component design guidelines:
 import asyncio
 import itertools as it
 import logging
-import os

 import homeassistant.core as ha
 import homeassistant.config as conf_util
@@ -111,11 +110,6 @@ def async_reload_core_config(hass):
@asyncio.coroutine
 def async_setup(hass, config):
    """Set up general services related to Home Assistant."""
-    descriptions = yield from hass.async_add_job(
-        conf_util.load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml')
-    )
-
    @asyncio.coroutine
    def async_handle_turn_service(service):
        """Handle calls to homeassistant.turn_on/off."""
@@ -155,14 +149,11 @@ def async_setup(hass, config):
        yield from asyncio.wait(tasks, loop=hass.loop)

    hass.services.async_register(
-        ha.DOMAIN, SERVICE_TURN_OFF, async_handle_turn_service,
-        descriptions[ha.DOMAIN][SERVICE_TURN_OFF])
+        ha.DOMAIN, SERVICE_TURN_OFF, async_handle_turn_service)
    hass.services.async_register(
-        ha.DOMAIN, SERVICE_TURN_ON, async_handle_turn_service,
-        descriptions[ha.DOMAIN][SERVICE_TURN_ON])
+        ha.DOMAIN, SERVICE_TURN_ON, async_handle_turn_service)
    hass.services.async_register(
-        ha.DOMAIN, SERVICE_TOGGLE, async_handle_turn_service,
-        descriptions[ha.DOMAIN][SERVICE_TOGGLE])
+        ha.DOMAIN, SERVICE_TOGGLE, async_handle_turn_service)

    @asyncio.coroutine
    def async_handle_core_service(call):
@@ -187,14 +178,11 @@ def async_setup(hass, config):
            hass.async_add_job(hass.async_stop(RESTART_EXIT_CODE))

    hass.services.async_register(
-        ha.DOMAIN, SERVICE_HOMEASSISTANT_STOP, async_handle_core_service,
-        descriptions[ha.DOMAIN][SERVICE_HOMEASSISTANT_STOP])
+        ha.DOMAIN, SERVICE_HOMEASSISTANT_STOP, async_handle_core_service)
    hass.services.async_register(
-        ha.DOMAIN, SERVICE_HOMEASSISTANT_RESTART, async_handle_core_service,
-        descriptions[ha.DOMAIN][SERVICE_HOMEASSISTANT_RESTART])
+        ha.DOMAIN, SERVICE_HOMEASSISTANT_RESTART, async_handle_core_service)
    hass.services.async_register(
-        ha.DOMAIN, SERVICE_CHECK_CONFIG, async_handle_core_service,
-        descriptions[ha.DOMAIN][SERVICE_CHECK_CONFIG])
+        ha.DOMAIN, SERVICE_CHECK_CONFIG, async_handle_core_service)

    @asyncio.coroutine
    def async_handle_reload_config(call):
@@ -209,7 +197,6 @@ def async_setup(hass, config):
            hass, conf.get(ha.DOMAIN) or {})

    hass.services.async_register(
-        ha.DOMAIN, SERVICE_RELOAD_CORE_CONFIG, async_handle_reload_config,
-        descriptions[ha.DOMAIN][SERVICE_RELOAD_CORE_CONFIG])
+        ha.DOMAIN, SERVICE_RELOAD_CORE_CONFIG, async_handle_reload_config)

    return True
@@ -7,11 +7,9 @@ https://home-assistant.io/components/abode/
 import asyncio
 import logging
 from functools import partial
-from os import path

 import voluptuous as vol

-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (
    ATTR_ATTRIBUTION, ATTR_DATE, ATTR_TIME, ATTR_ENTITY_ID, CONF_USERNAME,
    CONF_PASSWORD, CONF_EXCLUDE, CONF_NAME, CONF_LIGHTS,
@@ -188,22 +186,16 @@ def setup_hass_services(hass):
        for device in target_devices:
            device.trigger()

-    descriptions = load_yaml_config_file(
-        path.join(path.dirname(__file__), 'services.yaml'))[DOMAIN]
-
    hass.services.register(
        DOMAIN, SERVICE_SETTINGS, change_setting,
-        descriptions.get(SERVICE_SETTINGS),
        schema=CHANGE_SETTING_SCHEMA)

    hass.services.register(
        DOMAIN, SERVICE_CAPTURE_IMAGE, capture_image,
-        descriptions.get(SERVICE_CAPTURE_IMAGE),
        schema=CAPTURE_IMAGE_SCHEMA)

    hass.services.register(
        DOMAIN, SERVICE_TRIGGER, trigger_quick_action,
-        descriptions.get(SERVICE_TRIGGER),
        schema=TRIGGER_SCHEMA)


@@ -5,7 +5,6 @@ For more details about this component, please refer to the documentation.
 https://home-assistant.io/components/ads/

 """
-import os
 import threading
 import struct
 import logging
@@ -14,7 +13,6 @@ from collections import namedtuple
 import voluptuous as vol
 from homeassistant.const import CONF_DEVICE, CONF_PORT, CONF_IP_ADDRESS, \
    EVENT_HOMEASSISTANT_STOP
-from homeassistant.config import load_yaml_config_file
 import homeassistant.helpers.config_validation as cv

 REQUIREMENTS = ['pyads==2.2.6']
@@ -107,13 +105,8 @@ def setup(hass, config):
        except pyads.ADSError as err:
            _LOGGER.error(err)

-    # load descriptions from services.yaml
-    descriptions = load_yaml_config_file(
-        os.path.join(os.path.dirname(__file__), 'services.yaml'))
-
    hass.services.register(
        DOMAIN, SERVICE_WRITE_DATA_BY_NAME, handle_write_data_by_name,
-        descriptions[SERVICE_WRITE_DATA_BY_NAME],
        schema=SCHEMA_SERVICE_WRITE_DATA_BY_NAME
    )

@@ -7,7 +7,6 @@ https://home-assistant.io/components/alarm_control_panel/
 import asyncio
 from datetime import timedelta
 import logging
-import os

 import voluptuous as vol

@@ -15,7 +14,6 @@ from homeassistant.const import (
    ATTR_CODE, ATTR_CODE_FORMAT, ATTR_ENTITY_ID, SERVICE_ALARM_TRIGGER,
    SERVICE_ALARM_DISARM, SERVICE_ALARM_ARM_HOME, SERVICE_ALARM_ARM_AWAY,
    SERVICE_ALARM_ARM_NIGHT, SERVICE_ALARM_ARM_CUSTOM_BYPASS)
-from homeassistant.config import load_yaml_config_file
 from homeassistant.loader import bind_hass
 from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
 import homeassistant.helpers.config_validation as cv
@@ -148,14 +146,10 @@ def async_setup(hass, config):
        if update_tasks:
            yield from asyncio.wait(update_tasks, loop=hass.loop)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    for service in SERVICE_TO_METHOD:
        hass.services.async_register(
            DOMAIN, service, async_alarm_service_handler,
-            descriptions.get(service), schema=ALARM_SERVICE_SCHEMA)
+            schema=ALARM_SERVICE_SCHEMA)

    return True

@@ -7,23 +7,39 @@ https://home-assistant.io/components/alarm_control_panel.alarmdecoder/
 import asyncio
 import logging

+import voluptuous as vol
+
 import homeassistant.components.alarm_control_panel as alarm
+import homeassistant.helpers.config_validation as cv
 from homeassistant.components.alarmdecoder import (
    DATA_AD, SIGNAL_PANEL_MESSAGE)
 from homeassistant.const import (
-    STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED,
-    STATE_ALARM_TRIGGERED)
+    ATTR_CODE, STATE_ALARM_ARMED_AWAY, STATE_ALARM_ARMED_HOME,
+    STATE_ALARM_DISARMED, STATE_ALARM_TRIGGERED)

 _LOGGER = logging.getLogger(__name__)

 DEPENDENCIES = ['alarmdecoder']

+SERVICE_ALARM_TOGGLE_CHIME = 'alarmdecoder_alarm_toggle_chime'
+ALARM_TOGGLE_CHIME_SCHEMA = vol.Schema({
+    vol.Required(ATTR_CODE): cv.string,
+})
+

 def setup_platform(hass, config, add_devices, discovery_info=None):
    """Set up for AlarmDecoder alarm panels."""
-    add_devices([AlarmDecoderAlarmPanel()])
+    device = AlarmDecoderAlarmPanel()
+    add_devices([device])

-    return True
+    def alarm_toggle_chime_handler(service):
+        """Register toggle chime handler."""
+        code = service.data.get(ATTR_CODE)
+        device.alarm_toggle_chime(code)
+
+    hass.services.register(
+        alarm.DOMAIN, SERVICE_ALARM_TOGGLE_CHIME, alarm_toggle_chime_handler,
+        schema=ALARM_TOGGLE_CHIME_SCHEMA)


 class AlarmDecoderAlarmPanel(alarm.AlarmControlPanel):
@@ -34,6 +50,15 @@ class AlarmDecoderAlarmPanel(alarm.AlarmControlPanel):
        self._display = ""
        self._name = "Alarm Panel"
        self._state = None
+        self._ac_power = None
+        self._backlight_on = None
+        self._battery_low = None
+        self._check_zone = None
+        self._chime = None
+        self._entry_delay_off = None
+        self._programming_mode = None
+        self._ready = None
+        self._zone_bypassed = None

    @asyncio.coroutine
    def async_added_to_hass(self):
@@ -43,21 +68,25 @@ class AlarmDecoderAlarmPanel(alarm.AlarmControlPanel):

    def _message_callback(self, message):
        if message.alarm_sounding or message.fire_alarm:
-            if self._state != STATE_ALARM_TRIGGERED:
-                self._state = STATE_ALARM_TRIGGERED
-                self.schedule_update_ha_state()
+            self._state = STATE_ALARM_TRIGGERED
        elif message.armed_away:
-            if self._state != STATE_ALARM_ARMED_AWAY:
-                self._state = STATE_ALARM_ARMED_AWAY
-                self.schedule_update_ha_state()
+            self._state = STATE_ALARM_ARMED_AWAY
        elif message.armed_home:
-            if self._state != STATE_ALARM_ARMED_HOME:
-                self._state = STATE_ALARM_ARMED_HOME
-                self.schedule_update_ha_state()
+            self._state = STATE_ALARM_ARMED_HOME
        else:
-            if self._state != STATE_ALARM_DISARMED:
-                self._state = STATE_ALARM_DISARMED
-                self.schedule_update_ha_state()
+            self._state = STATE_ALARM_DISARMED
+
+        self._ac_power = message.ac_power
+        self._backlight_on = message.backlight_on
+        self._battery_low = message.battery_low
+        self._check_zone = message.check_zone
+        self._chime = message.chime_on
+        self._entry_delay_off = message.entry_delay_off
+        self._programming_mode = message.programming_mode
+        self._ready = message.ready
+        self._zone_bypassed = message.zone_bypassed
+
+        self.schedule_update_ha_state()

    @property
    def name(self):
@@ -79,20 +108,37 @@ class AlarmDecoderAlarmPanel(alarm.AlarmControlPanel):
        """Return the state of the device."""
        return self._state

+    @property
+    def device_state_attributes(self):
+        """Return the state attributes."""
+        return {
+            'ac_power': self._ac_power,
+            'backlight_on': self._backlight_on,
+            'battery_low': self._battery_low,
+            'check_zone': self._check_zone,
+            'chime': self._chime,
+            'entry_delay_off': self._entry_delay_off,
+            'programming_mode': self._programming_mode,
+            'ready': self._ready,
+            'zone_bypassed': self._zone_bypassed
+        }
+
    def alarm_disarm(self, code=None):
        """Send disarm command."""
        if code:
-            _LOGGER.debug("alarm_disarm: sending %s1", str(code))
            self.hass.data[DATA_AD].send("{!s}1".format(code))

    def alarm_arm_away(self, code=None):
        """Send arm away command."""
        if code:
-            _LOGGER.debug("alarm_arm_away: sending %s2", str(code))
            self.hass.data[DATA_AD].send("{!s}2".format(code))

    def alarm_arm_home(self, code=None):
        """Send arm home command."""
        if code:
-            _LOGGER.debug("alarm_arm_home: sending %s3", str(code))
            self.hass.data[DATA_AD].send("{!s}3".format(code))
+
+    def alarm_toggle_chime(self, code=None):
+        """Send toggle chime command."""
+        if code:
+            self.hass.data[DATA_AD].send("{!s}9".format(code))
@@ -18,7 +18,7 @@ from homeassistant.const import (
    STATE_ALARM_ARMED_HOME, STATE_ALARM_DISARMED, STATE_UNKNOWN)
 import homeassistant.helpers.config_validation as cv

-REQUIREMENTS = ['concord232==0.14']
+REQUIREMENTS = ['concord232==0.15']

 _LOGGER = logging.getLogger(__name__)

@@ -121,4 +121,4 @@ class Concord232Alarm(alarm.AlarmControlPanel):

    def alarm_arm_away(self, code=None):
        """Send arm away command."""
-        self._alarm.arm('auto')
+        self._alarm.arm('away')
@@ -16,9 +16,9 @@ from homeassistant.components.alarm_control_panel import PLATFORM_SCHEMA
 from homeassistant.const import (
    CONF_PORT, CONF_HOST, CONF_PASSWORD, CONF_USERNAME, STATE_UNKNOWN,
    CONF_NAME, STATE_ALARM_DISARMED, STATE_ALARM_ARMED_HOME,
-    STATE_ALARM_ARMED_AWAY, STATE_ALARM_TRIGGERED)
+    STATE_ALARM_ARMED_AWAY, STATE_ALARM_TRIGGERED, EVENT_HOMEASSISTANT_STOP)

-REQUIREMENTS = ['pythonegardia==1.0.22']
+REQUIREMENTS = ['pythonegardia==1.0.26']

 _LOGGER = logging.getLogger(__name__)

@@ -26,13 +26,15 @@ CONF_REPORT_SERVER_CODES = 'report_server_codes'
 CONF_REPORT_SERVER_ENABLED = 'report_server_enabled'
 CONF_REPORT_SERVER_PORT = 'report_server_port'
 CONF_REPORT_SERVER_CODES_IGNORE = 'ignore'
+CONF_VERSION = 'version'

 DEFAULT_NAME = 'Egardia'
 DEFAULT_PORT = 80
 DEFAULT_REPORT_SERVER_ENABLED = False
 DEFAULT_REPORT_SERVER_PORT = 52010
+DEFAULT_VERSION = 'GATE-01'
 DOMAIN = 'egardia'
-
+D_EGARDIASRV = 'egardiaserver'
 NOTIFICATION_ID = 'egardia_notification'
 NOTIFICATION_TITLE = 'Egardia'

@@ -49,6 +51,7 @@ PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_HOST): cv.string,
    vol.Required(CONF_PASSWORD): cv.string,
    vol.Required(CONF_USERNAME): cv.string,
+    vol.Optional(CONF_VERSION, default=DEFAULT_VERSION): cv.string,
    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
    vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
    vol.Optional(CONF_REPORT_SERVER_CODES): vol.All(cv.ensure_list),
@@ -62,6 +65,7 @@ PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
 def setup_platform(hass, config, add_devices, discovery_info=None):
    """Set up the Egardia platform."""
    from pythonegardia import egardiadevice
+    from pythonegardia import egardiaserver

    name = config.get(CONF_NAME)
    username = config.get(CONF_USERNAME)
@@ -71,41 +75,62 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
    rs_enabled = config.get(CONF_REPORT_SERVER_ENABLED)
    rs_port = config.get(CONF_REPORT_SERVER_PORT)
    rs_codes = config.get(CONF_REPORT_SERVER_CODES)
+    version = config.get(CONF_VERSION)

    try:
        egardiasystem = egardiadevice.EgardiaDevice(
-            host, port, username, password, '')
+            host, port, username, password, '', version)
    except requests.exceptions.RequestException:
        raise exc.PlatformNotReady()
    except egardiadevice.UnauthorizedError:
        _LOGGER.error("Unable to authorize. Wrong password or username")
-        return False
+        return

-    add_devices([EgardiaAlarm(
-        name, egardiasystem, hass, rs_enabled, rs_port, rs_codes)], True)
+    eg_dev = EgardiaAlarm(
+        name, egardiasystem, rs_enabled, rs_codes)
+
+    if rs_enabled:
+        # Set up the egardia server
+        _LOGGER.info("Setting up EgardiaServer")
+        try:
+            if D_EGARDIASRV not in hass.data:
+                server = egardiaserver.EgardiaServer('', rs_port)
+                bound = server.bind()
+                if not bound:
+                    raise IOError("Binding error occurred while " +
+                                  "starting EgardiaServer")
+                hass.data[D_EGARDIASRV] = server
+                server.start()
+        except IOError:
+            return
+        hass.data[D_EGARDIASRV].register_callback(eg_dev.handle_status_event)
+
+    def handle_stop_event(event):
+        """Callback function for HA stop event."""
+        hass.data[D_EGARDIASRV].stop()
+
+    # listen to home assistant stop event
+    hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, handle_stop_event)
+
+    # add egardia alarm device
+    add_devices([eg_dev], True)


 class EgardiaAlarm(alarm.AlarmControlPanel):
    """Representation of a Egardia alarm."""

-    def __init__(self, name, egardiasystem, hass, rs_enabled=False,
-                 rs_port=None, rs_codes=None):
+    def __init__(self, name, egardiasystem,
+                 rs_enabled=False, rs_codes=None):
        """Initialize object."""
        self._name = name
        self._egardiasystem = egardiasystem
-        self._status = STATE_UNKNOWN
+        self._status = None
        self._rs_enabled = rs_enabled
-        self._rs_port = rs_port
-        self._hass = hass
-
        if rs_codes is not None:
            self._rs_codes = rs_codes[0]
        else:
            self._rs_codes = rs_codes

-        if self._rs_enabled:
-            self.listen_to_system_status()
-
    @property
    def name(self):
        """Return the name of the device."""
@@ -123,19 +148,14 @@ class EgardiaAlarm(alarm.AlarmControlPanel):
            return True
        return False

-    def handle_system_status_event(self, event):
+    def handle_status_event(self, event):
        """Handle egardia_system_status_event."""
-        if event.data.get('status') is not None:
-            statuscode = event.data.get('status')
+        statuscode = event.get('status')
+        if statuscode is not None:
            status = self.lookupstatusfromcode(statuscode)
            self.parsestatus(status)
            self.schedule_update_ha_state()

-    def listen_to_system_status(self):
-        """Subscribe to egardia_system_status event."""
-        self._hass.bus.listen(
-            'egardia_system_status', self.handle_system_status_event)
-
    def lookupstatusfromcode(self, statuscode):
        """Look at the rs_codes and returns the status from the code."""
        status = 'UNKNOWN'
@@ -6,7 +6,6 @@ https://home-assistant.io/components/alarm_control_panel.envisalink/
 """
 import asyncio
 import logging
-import os

 import voluptuous as vol

@@ -14,7 +13,6 @@ from homeassistant.core import callback
 from homeassistant.helpers.dispatcher import async_dispatcher_connect
 import homeassistant.components.alarm_control_panel as alarm
 import homeassistant.helpers.config_validation as cv
-from homeassistant.config import load_yaml_config_file
 from homeassistant.components.envisalink import (
    DATA_EVL, EnvisalinkDevice, PARTITION_SCHEMA, CONF_CODE, CONF_PANIC,
    CONF_PARTITIONNAME, SIGNAL_KEYPAD_UPDATE, SIGNAL_PARTITION_UPDATE)
@@ -69,14 +67,9 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
        for device in target_devices:
            device.async_alarm_keypress(keypress)

-    # Register Envisalink specific services
-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    hass.services.async_register(
        alarm.DOMAIN, SERVICE_ALARM_KEYPRESS, alarm_keypress_handler,
-        descriptions.get(SERVICE_ALARM_KEYPRESS), schema=ALARM_KEYPRESS_SCHEMA)
+        schema=ALARM_KEYPRESS_SCHEMA)

    return True

@@ -17,7 +17,9 @@ from homeassistant.const import (
    STATE_ALARM_PENDING, STATE_ALARM_TRIGGERED, STATE_UNKNOWN,
    CONF_NAME, CONF_CODE)
 from homeassistant.components.mqtt import (
-    CONF_STATE_TOPIC, CONF_COMMAND_TOPIC, CONF_QOS)
+    CONF_AVAILABILITY_TOPIC, CONF_STATE_TOPIC, CONF_COMMAND_TOPIC,
+    CONF_PAYLOAD_AVAILABLE, CONF_PAYLOAD_NOT_AVAILABLE, CONF_QOS,
+    MqttAvailability)
 import homeassistant.helpers.config_validation as cv

 _LOGGER = logging.getLogger(__name__)
@@ -54,15 +56,21 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
        config.get(CONF_PAYLOAD_DISARM),
        config.get(CONF_PAYLOAD_ARM_HOME),
        config.get(CONF_PAYLOAD_ARM_AWAY),
-        config.get(CONF_CODE))])
+        config.get(CONF_CODE),
+        config.get(CONF_AVAILABILITY_TOPIC),
+        config.get(CONF_PAYLOAD_AVAILABLE),
+        config.get(CONF_PAYLOAD_NOT_AVAILABLE))])


-class MqttAlarm(alarm.AlarmControlPanel):
+class MqttAlarm(MqttAvailability, alarm.AlarmControlPanel):
    """Representation of a MQTT alarm status."""

    def __init__(self, name, state_topic, command_topic, qos, payload_disarm,
-                 payload_arm_home, payload_arm_away, code):
+                 payload_arm_home, payload_arm_away, code, availability_topic,
+                 payload_available, payload_not_available):
        """Init the MQTT Alarm Control Panel."""
+        super().__init__(availability_topic, qos, payload_available,
+                         payload_not_available)
        self._state = STATE_UNKNOWN
        self._name = name
        self._state_topic = state_topic
@@ -73,11 +81,11 @@ class MqttAlarm(alarm.AlarmControlPanel):
        self._payload_arm_away = payload_arm_away
        self._code = code

+    @asyncio.coroutine
    def async_added_to_hass(self):
-        """Subscribe mqtt events.
+        """Subscribe mqtt events."""
+        yield from super().async_added_to_hass()

-        This method must be run in the event loop and returns a coroutine.
-        """
        @callback
        def message_received(topic, payload, qos):
            """Run when new MQTT message has been received."""
@@ -89,7 +97,7 @@ class MqttAlarm(alarm.AlarmControlPanel):
            self._state = payload
            self.async_schedule_update_ha_state()

-        return mqtt.async_subscribe(
+        yield from mqtt.async_subscribe(
            self.hass, self._state_topic, message_received, self._qos)

    @property
@@ -59,3 +59,13 @@ envisalink_alarm_keypress:
    keypress:
      description: 'String to send to the alarm panel (1-6 characters).'
      example: '*71'
+
+alarmdecoder_alarm_toggle_chime:
+  description: Send the alarm the toggle chime command.
+  fields:
+    entity_id:
+      description: Name of the alarm control panel to trigger.
+      example: 'alarm_control_panel.downstairs'
+    code:
+      description: A required code to toggle the alarm control panel chime with.
+      example: 1234
@@ -6,13 +6,16 @@ https://home-assistant.io/components/alarmdecoder/
 """
 import logging

+from datetime import timedelta
 import voluptuous as vol

 import homeassistant.helpers.config_validation as cv
 from homeassistant.const import EVENT_HOMEASSISTANT_STOP
 from homeassistant.helpers.discovery import load_platform
+from homeassistant.util import dt as dt_util
+from homeassistant.components.binary_sensor import DEVICE_CLASSES_SCHEMA

-REQUIREMENTS = ['alarmdecoder==0.12.3']
+REQUIREMENTS = ['alarmdecoder==1.13.2']

 _LOGGER = logging.getLogger(__name__)

@@ -29,6 +32,7 @@ CONF_DEVICE_TYPE = 'type'
 CONF_PANEL_DISPLAY = 'panel_display'
 CONF_ZONE_NAME = 'name'
 CONF_ZONE_TYPE = 'type'
+CONF_ZONE_RFID = 'rfid'
 CONF_ZONES = 'zones'

 DEFAULT_DEVICE_TYPE = 'socket'
@@ -48,6 +52,7 @@ SIGNAL_PANEL_DISARM = 'alarmdecoder.panel_disarm'

 SIGNAL_ZONE_FAULT = 'alarmdecoder.zone_fault'
 SIGNAL_ZONE_RESTORE = 'alarmdecoder.zone_restore'
+SIGNAL_RFX_MESSAGE = 'alarmdecoder.rfx_message'

 DEVICE_SOCKET_SCHEMA = vol.Schema({
    vol.Required(CONF_DEVICE_TYPE): 'socket',
@@ -64,7 +69,9 @@ DEVICE_USB_SCHEMA = vol.Schema({

 ZONE_SCHEMA = vol.Schema({
    vol.Required(CONF_ZONE_NAME): cv.string,
-    vol.Optional(CONF_ZONE_TYPE, default=DEFAULT_ZONE_TYPE): cv.string})
+    vol.Optional(CONF_ZONE_TYPE,
+                 default=DEFAULT_ZONE_TYPE): vol.Any(DEVICE_CLASSES_SCHEMA),
+    vol.Optional(CONF_ZONE_RFID): cv.string})

 CONFIG_SCHEMA = vol.Schema({
    DOMAIN: vol.Schema({
@@ -85,6 +92,7 @@ def setup(hass, config):

    conf = config.get(DOMAIN)

+    restart = False
    device = conf.get(CONF_DEVICE)
    display = conf.get(CONF_PANEL_DISPLAY)
    zones = conf.get(CONF_ZONES)
@@ -98,13 +106,43 @@ def setup(hass, config):
    def stop_alarmdecoder(event):
        """Handle the shutdown of AlarmDecoder."""
        _LOGGER.debug("Shutting down alarmdecoder")
+        nonlocal restart
+        restart = False
        controller.close()

+    def open_connection(now=None):
+        """Open a connection to AlarmDecoder."""
+        from alarmdecoder.util import NoDeviceError
+        nonlocal restart
+        try:
+            controller.open(baud)
+        except NoDeviceError:
+            _LOGGER.debug("Failed to connect.  Retrying in 5 seconds")
+            hass.helpers.event.track_point_in_time(
+                open_connection, dt_util.utcnow() + timedelta(seconds=5))
+            return
+        _LOGGER.debug("Established a connection with the alarmdecoder")
+        restart = True
+
+    def handle_closed_connection(event):
+        """Restart after unexpected loss of connection."""
+        nonlocal restart
+        if not restart:
+            return
+        restart = False
+        _LOGGER.warning("AlarmDecoder unexpectedly lost connection.")
+        hass.add_job(open_connection)
+
    def handle_message(sender, message):
        """Handle message from AlarmDecoder."""
        hass.helpers.dispatcher.dispatcher_send(
            SIGNAL_PANEL_MESSAGE, message)

+    def handle_rfx_message(sender, message):
+        """Handle RFX message from AlarmDecoder."""
+        hass.helpers.dispatcher.dispatcher_send(
+            SIGNAL_RFX_MESSAGE, message)
+
    def zone_fault_callback(sender, zone):
        """Handle zone fault from AlarmDecoder."""
        hass.helpers.dispatcher.dispatcher_send(
@@ -129,14 +167,15 @@ def setup(hass, config):
        return False

    controller.on_message += handle_message
+    controller.on_rfx_message += handle_rfx_message
    controller.on_zone_fault += zone_fault_callback
    controller.on_zone_restore += zone_restore_callback
+    controller.on_close += handle_closed_connection

    hass.data[DATA_AD] = controller

-    controller.open(baud)
+    open_connection()

-    _LOGGER.debug("Established a connection with the alarmdecoder")
    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, stop_alarmdecoder)

    load_platform(hass, 'alarm_control_panel', DOMAIN, conf, config)
@@ -7,12 +7,10 @@ https://home-assistant.io/components/alert/
 import asyncio
 from datetime import datetime, timedelta
 import logging
-import os

 import voluptuous as vol

 from homeassistant.core import callback
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (
    CONF_ENTITY_ID, STATE_IDLE, CONF_NAME, CONF_STATE, STATE_ON, STATE_OFF,
    SERVICE_TURN_ON, SERVICE_TURN_OFF, SERVICE_TOGGLE, ATTR_ENTITY_ID)
@@ -129,22 +127,16 @@ def async_setup(hass, config):
                       alert[CONF_NOTIFIERS], alert[CONF_CAN_ACK])
        all_alerts[entity.entity_id] = entity

-    # Read descriptions
-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-    descriptions = descriptions.get(DOMAIN, {})
-
    # Setup service calls
    hass.services.async_register(
        DOMAIN, SERVICE_TURN_OFF, async_handle_alert_service,
-        descriptions.get(SERVICE_TURN_OFF), schema=ALERT_SERVICE_SCHEMA)
+        schema=ALERT_SERVICE_SCHEMA)
    hass.services.async_register(
        DOMAIN, SERVICE_TURN_ON, async_handle_alert_service,
-        descriptions.get(SERVICE_TURN_ON), schema=ALERT_SERVICE_SCHEMA)
+        schema=ALERT_SERVICE_SCHEMA)
    hass.services.async_register(
        DOMAIN, SERVICE_TOGGLE, async_handle_alert_service,
-        descriptions.get(SERVICE_TOGGLE), schema=ALERT_SERVICE_SCHEMA)
+        schema=ALERT_SERVICE_SCHEMA)

    tasks = [alert.async_update_ha_state() for alert in all_alerts.values()]
    if tasks:
@@ -9,15 +9,16 @@ import asyncio
 import enum
 import logging

+from homeassistant.exceptions import HomeAssistantError
 from homeassistant.core import callback
-from homeassistant.const import HTTP_BAD_REQUEST
 from homeassistant.helpers import intent
 from homeassistant.components import http
+from homeassistant.util.decorator import Registry

 from .const import DOMAIN, SYN_RESOLUTION_MATCH

 INTENTS_API_ENDPOINT = '/api/alexa'
-
+HANDLERS = Registry()
 _LOGGER = logging.getLogger(__name__)


@@ -47,6 +48,10 @@ def async_setup(hass):
    hass.http.register_view(AlexaIntentsView)


+class UnknownRequest(HomeAssistantError):
+    """When an unknown Alexa request is passed in."""
+
+
 class AlexaIntentsView(http.HomeAssistantView):
    """Handle Alexa requests."""

@@ -57,71 +62,112 @@ class AlexaIntentsView(http.HomeAssistantView):
    def post(self, request):
        """Handle Alexa."""
        hass = request.app['hass']
-        data = yield from request.json()
+        message = yield from request.json()

-        _LOGGER.debug('Received Alexa request: %s', data)
-
-        req = data.get('request')
-
-        if req is None:
-            _LOGGER.error('Received invalid data from Alexa: %s', data)
-            return self.json_message('Expected request value not received',
-                                     HTTP_BAD_REQUEST)
-
-        req_type = req['type']
-
-        if req_type == 'SessionEndedRequest':
-            return None
-
-        alexa_intent_info = req.get('intent')
-        alexa_response = AlexaResponse(hass, alexa_intent_info)
-
-        if req_type != 'IntentRequest' and req_type != 'LaunchRequest':
-            _LOGGER.warning('Received unsupported request: %s', req_type)
-            return self.json_message(
-                'Received unsupported request: {}'.format(req_type),
-                HTTP_BAD_REQUEST)
-
-        if req_type == 'LaunchRequest':
-            intent_name = data.get('session', {})       \
-                              .get('application', {})   \
-                              .get('applicationId')
-        else:
-            intent_name = alexa_intent_info['name']
+        _LOGGER.debug('Received Alexa request: %s', message)

        try:
-            intent_response = yield from intent.async_handle(
-                hass, DOMAIN, intent_name,
-                {key: {'value': value} for key, value
-                 in alexa_response.variables.items()})
+            response = yield from async_handle_message(hass, message)
+            return b'' if response is None else self.json(response)
+        except UnknownRequest as err:
+            _LOGGER.warning(str(err))
+            return self.json(intent_error_response(
+                hass, message, str(err)))
+
        except intent.UnknownIntent as err:
-            _LOGGER.warning('Received unknown intent %s', intent_name)
-            alexa_response.add_speech(
-                SpeechType.plaintext,
-                "This intent is not yet configured within Home Assistant.")
-            return self.json(alexa_response)
+            _LOGGER.warning(str(err))
+            return self.json(intent_error_response(
+                hass, message,
+                "This intent is not yet configured within Home Assistant."))

        except intent.InvalidSlotInfo as err:
            _LOGGER.error('Received invalid slot data from Alexa: %s', err)
-            return self.json_message('Invalid slot data received',
-                                     HTTP_BAD_REQUEST)
-        except intent.IntentError:
-            _LOGGER.exception('Error handling request for %s', intent_name)
-            return self.json_message('Error handling intent', HTTP_BAD_REQUEST)
+            return self.json(intent_error_response(
+                hass, message,
+                "Invalid slot information received for this intent."))

-        for intent_speech, alexa_speech in SPEECH_MAPPINGS.items():
-            if intent_speech in intent_response.speech:
-                alexa_response.add_speech(
-                    alexa_speech,
-                    intent_response.speech[intent_speech]['speech'])
-                break
+        except intent.IntentError as err:
+            _LOGGER.exception(str(err))
+            return self.json(intent_error_response(
+                hass, message, "Error handling intent."))

-        if 'simple' in intent_response.card:
-            alexa_response.add_card(
-                CardType.simple, intent_response.card['simple']['title'],
-                intent_response.card['simple']['content'])

-        return self.json(alexa_response)
+def intent_error_response(hass, message, error):
+    """Return an Alexa response that will speak the error message."""
+    alexa_intent_info = message.get('request').get('intent')
+    alexa_response = AlexaResponse(hass, alexa_intent_info)
+    alexa_response.add_speech(SpeechType.plaintext, error)
+    return alexa_response.as_dict()
+
+
+@asyncio.coroutine
+def async_handle_message(hass, message):
+    """Handle an Alexa intent.
+
+    Raises:
+     - UnknownRequest
+     - intent.UnknownIntent
+     - intent.InvalidSlotInfo
+     - intent.IntentError
+    """
+    req = message.get('request')
+    req_type = req['type']
+
+    handler = HANDLERS.get(req_type)
+
+    if not handler:
+        raise UnknownRequest('Received unknown request {}'.format(req_type))
+
+    return (yield from handler(hass, message))
+
+
+@HANDLERS.register('SessionEndedRequest')
+@asyncio.coroutine
+def async_handle_session_end(hass, message):
+    """Handle a session end request."""
+    return None
+
+
+@HANDLERS.register('IntentRequest')
+@HANDLERS.register('LaunchRequest')
+@asyncio.coroutine
+def async_handle_intent(hass, message):
+    """Handle an intent request.
+
+    Raises:
+     - intent.UnknownIntent
+     - intent.InvalidSlotInfo
+     - intent.IntentError
+    """
+    req = message.get('request')
+    alexa_intent_info = req.get('intent')
+    alexa_response = AlexaResponse(hass, alexa_intent_info)
+
+    if req['type'] == 'LaunchRequest':
+        intent_name = message.get('session', {})  \
+                             .get('application', {})  \
+                             .get('applicationId')
+    else:
+        intent_name = alexa_intent_info['name']
+
+    intent_response = yield from intent.async_handle(
+        hass, DOMAIN, intent_name,
+        {key: {'value': value} for key, value
+         in alexa_response.variables.items()})
+
+    for intent_speech, alexa_speech in SPEECH_MAPPINGS.items():
+        if intent_speech in intent_response.speech:
+            alexa_response.add_speech(
+                alexa_speech,
+                intent_response.speech[intent_speech]['speech'])
+            break
+
+    if 'simple' in intent_response.card:
+        alexa_response.add_card(
+            CardType.simple, intent_response.card['simple']['title'],
+            intent_response.card['simple']['content'])
+
+    return alexa_response.as_dict()


 def resolve_slot_synonyms(key, request):
@@ -1,6 +1,5 @@
 """Support for alexa Smart Home Skill API."""
 import asyncio
-from collections import namedtuple
 import logging
 import math
 from uuid import uuid4
@@ -27,10 +26,9 @@ API_EVENT = 'event'
 API_HEADER = 'header'
 API_PAYLOAD = 'payload'

-ATTR_ALEXA_DESCRIPTION = 'alexa_description'
-ATTR_ALEXA_DISPLAY_CATEGORIES = 'alexa_display_categories'
-ATTR_ALEXA_HIDDEN = 'alexa_hidden'
-ATTR_ALEXA_NAME = 'alexa_name'
+CONF_DESCRIPTION = 'description'
+CONF_DISPLAY_CATEGORIES = 'display_categories'
+CONF_NAME = 'name'


 MAPPING_COMPONENT = {
@@ -73,7 +71,13 @@ MAPPING_COMPONENT = {
 }


-Config = namedtuple('AlexaConfig', 'filter')
+class Config:
+    """Hold the configuration for Alexa."""
+
+    def __init__(self, should_expose, entity_config=None):
+        """Initialize the configuration."""
+        self.should_expose = should_expose
+        self.entity_config = entity_config or {}


@asyncio.coroutine
@@ -150,32 +154,28 @@ def async_api_discovery(hass, config, request):
    discovery_endpoints = []

    for entity in hass.states.async_all():
-        if not config.filter(entity.entity_id):
+        if not config.should_expose(entity.entity_id):
            _LOGGER.debug("Not exposing %s because filtered by config",
                          entity.entity_id)
            continue

-        if entity.attributes.get(ATTR_ALEXA_HIDDEN, False):
-            _LOGGER.debug("Not exposing %s because alexa_hidden is true",
-                          entity.entity_id)
-            continue
-
        class_data = MAPPING_COMPONENT.get(entity.domain)

        if not class_data:
            continue

-        friendly_name = entity.attributes.get(ATTR_ALEXA_NAME, entity.name)
-        description = entity.attributes.get(ATTR_ALEXA_DESCRIPTION,
-                                            entity.entity_id)
+        entity_conf = config.entity_config.get(entity.entity_id, {})
+
+        friendly_name = entity_conf.get(CONF_NAME, entity.name)
+        description = entity_conf.get(CONF_DESCRIPTION, entity.entity_id)

        # Required description as per Amazon Scene docs
        if entity.domain == scene.DOMAIN:
            scene_fmt = '{} (Scene connected via Home Assistant)'
            description = scene_fmt.format(description)

-        cat_key = ATTR_ALEXA_DISPLAY_CATEGORIES
-        display_categories = entity.attributes.get(cat_key, class_data[0])
+        display_categories = entity_conf.get(CONF_DISPLAY_CATEGORIES,
+                                             class_data[0])

        endpoint = {
            'displayCategories': [display_categories],
@@ -243,9 +243,13 @@ def async_api_turn_on(hass, config, request, entity):
    if entity.domain == group.DOMAIN:
        domain = ha.DOMAIN

-    yield from hass.services.async_call(domain, SERVICE_TURN_ON, {
+    service = SERVICE_TURN_ON
+    if entity.domain == cover.DOMAIN:
+        service = cover.SERVICE_OPEN_COVER
+
+    yield from hass.services.async_call(domain, service, {
        ATTR_ENTITY_ID: entity.entity_id
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -259,9 +263,13 @@ def async_api_turn_off(hass, config, request, entity):
    if entity.domain == group.DOMAIN:
        domain = ha.DOMAIN

-    yield from hass.services.async_call(domain, SERVICE_TURN_OFF, {
+    service = SERVICE_TURN_OFF
+    if entity.domain == cover.DOMAIN:
+        service = cover.SERVICE_CLOSE_COVER
+
+    yield from hass.services.async_call(domain, service, {
        ATTR_ENTITY_ID: entity.entity_id
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -276,7 +284,7 @@ def async_api_set_brightness(hass, config, request, entity):
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id,
        light.ATTR_BRIGHTNESS_PCT: brightness,
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -300,7 +308,7 @@ def async_api_adjust_brightness(hass, config, request, entity):
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id,
        light.ATTR_BRIGHTNESS_PCT: brightness,
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -321,14 +329,14 @@ def async_api_set_color(hass, config, request, entity):
        yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
            ATTR_ENTITY_ID: entity.entity_id,
            light.ATTR_RGB_COLOR: rgb,
-        }, blocking=True)
+        }, blocking=False)
    else:
        xyz = color_util.color_RGB_to_xy(*rgb)
        yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
            ATTR_ENTITY_ID: entity.entity_id,
            light.ATTR_XY_COLOR: (xyz[0], xyz[1]),
            light.ATTR_BRIGHTNESS: xyz[2],
-        }, blocking=True)
+        }, blocking=False)

    return api_message(request)

@@ -343,7 +351,7 @@ def async_api_set_color_temperature(hass, config, request, entity):
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id,
        light.ATTR_KELVIN: kelvin,
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -361,7 +369,7 @@ def async_api_decrease_color_temp(hass, config, request, entity):
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id,
        light.ATTR_COLOR_TEMP: value,
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -379,7 +387,7 @@ def async_api_increase_color_temp(hass, config, request, entity):
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id,
        light.ATTR_COLOR_TEMP: value,
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -391,7 +399,7 @@ def async_api_activate(hass, config, request, entity):
    """Process a activate request."""
    yield from hass.services.async_call(entity.domain, SERVICE_TURN_ON, {
        ATTR_ENTITY_ID: entity.entity_id
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -421,8 +429,8 @@ def async_api_set_percentage(hass, config, request, entity):
        service = SERVICE_SET_COVER_POSITION
        data[cover.ATTR_POSITION] = percentage

-    yield from hass.services.async_call(entity.domain, service,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, service, data, blocking=False)

    return api_message(request)

@@ -469,8 +477,8 @@ def async_api_adjust_percentage(hass, config, request, entity):

        data[cover.ATTR_POSITION] = max(0, percentage_delta + current)

-    yield from hass.services.async_call(entity.domain, service,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, service, data, blocking=False)

    return api_message(request)

@@ -482,7 +490,7 @@ def async_api_lock(hass, config, request, entity):
    """Process a lock request."""
    yield from hass.services.async_call(entity.domain, SERVICE_LOCK, {
        ATTR_ENTITY_ID: entity.entity_id
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -495,7 +503,7 @@ def async_api_unlock(hass, config, request, entity):
    """Process a unlock request."""
    yield from hass.services.async_call(entity.domain, SERVICE_UNLOCK, {
        ATTR_ENTITY_ID: entity.entity_id
-    }, blocking=True)
+    }, blocking=False)

    return api_message(request)

@@ -512,8 +520,9 @@ def async_api_set_volume(hass, config, request, entity):
        media_player.ATTR_MEDIA_VOLUME_LEVEL: volume,
    }

-    yield from hass.services.async_call(entity.domain, SERVICE_VOLUME_SET,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_VOLUME_SET,
+        data, blocking=False)

    return api_message(request)

@@ -540,9 +549,9 @@ def async_api_adjust_volume(hass, config, request, entity):
        media_player.ATTR_MEDIA_VOLUME_LEVEL: volume,
    }

-    yield from hass.services.async_call(entity.domain,
-                                        media_player.SERVICE_VOLUME_SET,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, media_player.SERVICE_VOLUME_SET,
+        data, blocking=False)

    return api_message(request)

@@ -559,9 +568,9 @@ def async_api_set_mute(hass, config, request, entity):
        media_player.ATTR_MEDIA_VOLUME_MUTED: mute,
    }

-    yield from hass.services.async_call(entity.domain,
-                                        media_player.SERVICE_VOLUME_MUTE,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, media_player.SERVICE_VOLUME_MUTE,
+        data, blocking=False)

    return api_message(request)

@@ -575,8 +584,9 @@ def async_api_play(hass, config, request, entity):
        ATTR_ENTITY_ID: entity.entity_id
    }

-    yield from hass.services.async_call(entity.domain, SERVICE_MEDIA_PLAY,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_MEDIA_PLAY,
+        data, blocking=False)

    return api_message(request)

@@ -590,8 +600,9 @@ def async_api_pause(hass, config, request, entity):
        ATTR_ENTITY_ID: entity.entity_id
    }

-    yield from hass.services.async_call(entity.domain, SERVICE_MEDIA_PAUSE,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_MEDIA_PAUSE,
+        data, blocking=False)

    return api_message(request)

@@ -605,8 +616,9 @@ def async_api_stop(hass, config, request, entity):
        ATTR_ENTITY_ID: entity.entity_id
    }

-    yield from hass.services.async_call(entity.domain, SERVICE_MEDIA_STOP,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_MEDIA_STOP,
+        data, blocking=False)

    return api_message(request)

@@ -620,9 +632,9 @@ def async_api_next(hass, config, request, entity):
        ATTR_ENTITY_ID: entity.entity_id
    }

-    yield from hass.services.async_call(entity.domain,
-                                        SERVICE_MEDIA_NEXT_TRACK,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_MEDIA_NEXT_TRACK,
+        data, blocking=False)

    return api_message(request)

@@ -636,8 +648,8 @@ def async_api_previous(hass, config, request, entity):
        ATTR_ENTITY_ID: entity.entity_id
    }

-    yield from hass.services.async_call(entity.domain,
-                                        SERVICE_MEDIA_PREVIOUS_TRACK,
-                                        data, blocking=True)
+    yield from hass.services.async_call(
+        entity.domain, SERVICE_MEDIA_PREVIOUS_TRACK,
+        data, blocking=False)

    return api_message(request)
@@ -24,6 +24,7 @@ from homeassistant.const import (
    __version__)
 from homeassistant.exceptions import TemplateError
 from homeassistant.helpers.state import AsyncTrackStates
+from homeassistant.helpers.service import async_get_all_descriptions
 from homeassistant.helpers import template
 from homeassistant.components.http import HomeAssistantView

@@ -293,10 +294,11 @@ class APIServicesView(HomeAssistantView):
    url = URL_API_SERVICES
    name = "api:services"

-    @ha.callback
+    @asyncio.coroutine
    def get(self, request):
        """Get registered services."""
-        return self.json(async_services_json(request.app['hass']))
+        services = yield from async_services_json(request.app['hass'])
+        return self.json(services)


 class APIDomainServicesView(HomeAssistantView):
@@ -355,10 +357,12 @@ class APITemplateView(HomeAssistantView):
                                     HTTP_BAD_REQUEST)


+@asyncio.coroutine
 def async_services_json(hass):
    """Generate services data to JSONify."""
+    descriptions = yield from async_get_all_descriptions(hass)
    return [{"domain": key, "services": value}
-            for key, value in hass.services.async_services().items()]
+            for key, value in descriptions.items()]


 def async_events_json(hass):
@@ -4,7 +4,6 @@ Support for Apple TV.
 For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/apple_tv/
 """
-import os
 import asyncio
 import logging

@@ -12,7 +11,6 @@ import voluptuous as vol

 from typing import Union, TypeVar, Sequence
 from homeassistant.const import (CONF_HOST, CONF_NAME, ATTR_ENTITY_ID)
-from homeassistant.config import load_yaml_config_file
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers import discovery
 from homeassistant.components.discovery import SERVICE_APPLE_TV
@@ -183,18 +181,12 @@ def async_setup(hass, config):
    if tasks:
        yield from asyncio.wait(tasks, loop=hass.loop)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    hass.services.async_register(
        DOMAIN, SERVICE_SCAN, async_service_handler,
-        descriptions.get(SERVICE_SCAN),
        schema=APPLE_TV_SCAN_SCHEMA)

    hass.services.async_register(
        DOMAIN, SERVICE_AUTHENTICATE, async_service_handler,
-        descriptions.get(SERVICE_AUTHENTICATE),
        schema=APPLE_TV_AUTHENTICATE_SCHEMA)

    return True
@@ -12,7 +12,7 @@ from requests.exceptions import HTTPError, ConnectTimeout
 from homeassistant.helpers import config_validation as cv
 from homeassistant.const import CONF_USERNAME, CONF_PASSWORD

-REQUIREMENTS = ['pyarlo==0.1.0']
+REQUIREMENTS = ['pyarlo==0.1.2']

 _LOGGER = logging.getLogger(__name__)

@@ -7,14 +7,12 @@ https://home-assistant.io/components/automation/
 import asyncio
 from functools import partial
 import logging
-import os

 import voluptuous as vol

 from homeassistant.setup import async_prepare_setup_platform
 from homeassistant.core import CoreState
 from homeassistant.loader import bind_hass
-from homeassistant import config as conf_util
 from homeassistant.const import (
    ATTR_ENTITY_ID, CONF_PLATFORM, STATE_ON, SERVICE_TURN_ON, SERVICE_TURN_OFF,
    SERVICE_TOGGLE, SERVICE_RELOAD, EVENT_HOMEASSISTANT_START, CONF_ID)
@@ -166,11 +164,6 @@ def async_setup(hass, config):

    yield from _async_process_config(hass, config, component)

-    descriptions = yield from hass.async_add_job(
-        conf_util.load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml')
-    )
-
    @asyncio.coroutine
    def trigger_service_handler(service_call):
        """Handle automation triggers."""
@@ -216,20 +209,20 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_TRIGGER, trigger_service_handler,
-        descriptions.get(SERVICE_TRIGGER), schema=TRIGGER_SERVICE_SCHEMA)
+        schema=TRIGGER_SERVICE_SCHEMA)

    hass.services.async_register(
        DOMAIN, SERVICE_RELOAD, reload_service_handler,
-        descriptions.get(SERVICE_RELOAD), schema=RELOAD_SERVICE_SCHEMA)
+        schema=RELOAD_SERVICE_SCHEMA)

    hass.services.async_register(
        DOMAIN, SERVICE_TOGGLE, toggle_service_handler,
-        descriptions.get(SERVICE_TOGGLE), schema=SERVICE_SCHEMA)
+        schema=SERVICE_SCHEMA)

    for service in (SERVICE_TURN_ON, SERVICE_TURN_OFF):
        hass.services.async_register(
            DOMAIN, service, turn_onoff_service_handler,
-            descriptions.get(service), schema=SERVICE_SCHEMA)
+            schema=SERVICE_SCHEMA)

    return True

@@ -55,7 +55,7 @@ def async_trigger(hass, config, action):

        # Ignore changes to state attributes if from/to is in use
        if (not match_all and from_s is not None and to_s is not None and
-                from_s.last_changed == to_s.last_changed):
+                from_s.state == to_s.state):
            return

        if not time_delta:
@@ -6,12 +6,10 @@ https://home-assistant.io/components/axis/
 """

 import logging
-import os

 import voluptuous as vol

 from homeassistant.components.discovery import SERVICE_AXIS
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (ATTR_LOCATION, ATTR_TRIPPED,
                                 CONF_EVENT, CONF_HOST, CONF_INCLUDE,
                                 CONF_NAME, CONF_PASSWORD, CONF_PORT,
@@ -195,10 +193,6 @@ def setup(hass, config):
            if not setup_device(hass, config, device_config):
                _LOGGER.error("Couldn\'t set up %s", device_config[CONF_NAME])

-    # Services to communicate with device.
-    descriptions = load_yaml_config_file(
-        os.path.join(os.path.dirname(__file__), 'services.yaml'))
-
    def vapix_service(call):
        """Service to send a message."""
        for _, device in AXIS_DEVICES.items():
@@ -216,7 +210,6 @@ def setup(hass, config):
    hass.services.register(DOMAIN,
                           SERVICE_VAPIX_CALL,
                           vapix_service,
-                           descriptions[DOMAIN][SERVICE_VAPIX_CALL],
                           schema=SERVICE_SCHEMA)
    return True

@@ -21,24 +21,27 @@ SCAN_INTERVAL = timedelta(seconds=30)
 ENTITY_ID_FORMAT = DOMAIN + '.{}'
 DEVICE_CLASSES = [
    'battery',       # On means low, Off means normal
-    'cold',          # On means cold (or too cold)
-    'connectivity',  # On means connection present, Off = no connection
-    'gas',           # CO, CO2, etc.
-    'heat',          # On means hot (or too hot)
-    'light',         # Lightness threshold
-    'moisture',      # Specifically a wetness sensor
-    'motion',        # Motion sensor
-    'moving',        # On means moving, Off means stopped
-    'occupancy',     # On means occupied, Off means not occupied
-    'opening',       # Door, window, etc.
+    'cold',          # On means cold, Off means normal
+    'connectivity',  # On means connected, Off means disconnected
+    'door',          # On means open, Off means closed
+    'garage_door',   # On means open, Off means closed
+    'gas',           # On means gas detected, Off means no gas (clear)
+    'heat',          # On means hot, Off means normal
+    'light',         # On means light detected, Off means no light
+    'moisture',      # On means wet, Off means dry
+    'motion',        # On means motion detected, Off means no motion (clear)
+    'moving',        # On means moving, Off means not moving (stopped)
+    'occupancy',     # On means occupied, Off means not occupied (clear)
+    'opening',       # On means open, Off means closed
    'plug',          # On means plugged in, Off means unplugged
-    'power',         # Power, over-current, etc
+    'power',         # On means power detected, Off means no power
    'presence',      # On means home, Off means away
-    'problem',       # On means there is a problem, Off means the status is OK
-    'safety',        # Generic on=unsafe, off=safe
-    'smoke',         # Smoke detector
-    'sound',         # On means sound detected, Off means no sound
+    'problem',       # On means problem detected, Off means no problem (OK)
+    'safety',        # On means unsafe, Off means safe
+    'smoke',         # On means smoke detected, Off means no smoke (clear)
+    'sound',         # On means sound detected, Off means no sound (clear)
    'vibration',     # On means vibration detected, Off means no vibration
+    'window',        # On means open, Off means closed
 ]

 DEVICE_CLASSES_SCHEMA = vol.All(vol.Lower, vol.In(DEVICE_CLASSES))
@@ -10,12 +10,22 @@ import logging
 from homeassistant.components.binary_sensor import BinarySensorDevice
 from homeassistant.components.alarmdecoder import (
    ZONE_SCHEMA, CONF_ZONES, CONF_ZONE_NAME, CONF_ZONE_TYPE,
-    SIGNAL_ZONE_FAULT, SIGNAL_ZONE_RESTORE)
+    CONF_ZONE_RFID, SIGNAL_ZONE_FAULT, SIGNAL_ZONE_RESTORE,
+    SIGNAL_RFX_MESSAGE)

 DEPENDENCIES = ['alarmdecoder']

 _LOGGER = logging.getLogger(__name__)

+ATTR_RF_BIT0 = 'rf_bit0'
+ATTR_RF_LOW_BAT = 'rf_low_battery'
+ATTR_RF_SUPERVISED = 'rf_supervised'
+ATTR_RF_BIT3 = 'rf_bit3'
+ATTR_RF_LOOP3 = 'rf_loop3'
+ATTR_RF_LOOP2 = 'rf_loop2'
+ATTR_RF_LOOP4 = 'rf_loop4'
+ATTR_RF_LOOP1 = 'rf_loop1'
+

 def setup_platform(hass, config, add_devices, discovery_info=None):
    """Set up the AlarmDecoder binary sensor devices."""
@@ -26,7 +36,9 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
        device_config_data = ZONE_SCHEMA(configured_zones[zone_num])
        zone_type = device_config_data[CONF_ZONE_TYPE]
        zone_name = device_config_data[CONF_ZONE_NAME]
-        device = AlarmDecoderBinarySensor(zone_num, zone_name, zone_type)
+        zone_rfid = device_config_data.get(CONF_ZONE_RFID)
+        device = AlarmDecoderBinarySensor(
+            zone_num, zone_name, zone_type, zone_rfid)
        devices.append(device)

    add_devices(devices)
@@ -37,13 +49,14 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
 class AlarmDecoderBinarySensor(BinarySensorDevice):
    """Representation of an AlarmDecoder binary sensor."""

-    def __init__(self, zone_number, zone_name, zone_type):
+    def __init__(self, zone_number, zone_name, zone_type, zone_rfid):
        """Initialize the binary_sensor."""
        self._zone_number = zone_number
        self._zone_type = zone_type
-        self._state = 0
+        self._state = None
        self._name = zone_name
-        self._type = zone_type
+        self._rfid = zone_rfid
+        self._rfstate = None

    @asyncio.coroutine
    def async_added_to_hass(self):
@@ -54,27 +67,34 @@ class AlarmDecoderBinarySensor(BinarySensorDevice):
        self.hass.helpers.dispatcher.async_dispatcher_connect(
            SIGNAL_ZONE_RESTORE, self._restore_callback)

+        self.hass.helpers.dispatcher.async_dispatcher_connect(
+            SIGNAL_RFX_MESSAGE, self._rfx_message_callback)
+
    @property
    def name(self):
        """Return the name of the entity."""
        return self._name

-    @property
-    def icon(self):
-        """Icon for device by its type."""
-        if "window" in self._name.lower():
-            return "mdi:window-open" if self.is_on else "mdi:window-closed"
-
-        if self._type == 'smoke':
-            return "mdi:fire"
-
-        return None
-
    @property
    def should_poll(self):
        """No polling needed."""
        return False

+    @property
+    def device_state_attributes(self):
+        """Return the state attributes."""
+        attr = {}
+        if self._rfid and self._rfstate is not None:
+            attr[ATTR_RF_BIT0] = True if self._rfstate & 0x01 else False
+            attr[ATTR_RF_LOW_BAT] = True if self._rfstate & 0x02 else False
+            attr[ATTR_RF_SUPERVISED] = True if self._rfstate & 0x04 else False
+            attr[ATTR_RF_BIT3] = True if self._rfstate & 0x08 else False
+            attr[ATTR_RF_LOOP3] = True if self._rfstate & 0x10 else False
+            attr[ATTR_RF_LOOP2] = True if self._rfstate & 0x20 else False
+            attr[ATTR_RF_LOOP4] = True if self._rfstate & 0x40 else False
+            attr[ATTR_RF_LOOP1] = True if self._rfstate & 0x80 else False
+        return attr
+
    @property
    def is_on(self):
        """Return true if sensor is on."""
@@ -96,3 +116,9 @@ class AlarmDecoderBinarySensor(BinarySensorDevice):
        if zone is None or int(zone) == self._zone_number:
            self._state = 0
            self.schedule_update_ha_state()
+
+    def _rfx_message_callback(self, message):
+        """Update RF state."""
+        if self._rfid and message and message.serial_number == self._rfid:
+            self._rfstate = message.value
+            self.schedule_update_ha_state()
@@ -15,7 +15,7 @@ from homeassistant.components.binary_sensor import (
 from homeassistant.const import (CONF_HOST, CONF_PORT)
 import homeassistant.helpers.config_validation as cv

-REQUIREMENTS = ['concord232==0.14']
+REQUIREMENTS = ['concord232==0.15']

 _LOGGER = logging.getLogger(__name__)

@@ -62,6 +62,13 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
        _LOGGER.error("Unable to connect to Concord232: %s", str(ex))
        return False

+    # The order of zones returned by client.list_zones() can vary.
+    # When the zones are not named, this can result in the same entity
+    # name mapping to different sensors in an unpredictable way.  Sort
+    # the zones by zone number to prevent this.
+
+    client.zones.sort(key=lambda zone: zone['number'])
+
    for zone in client.zones:
        _LOGGER.info("Loading Zone found: %s", zone['name'])
        if zone['number'] not in exclude:
@@ -118,7 +125,7 @@ class Concord232ZoneSensor(BinarySensorDevice):
    def is_on(self):
        """Return true if the binary sensor is on."""
        # True means "faulted" or "open" or "abnormal state"
-        return bool(self._zone['state'] == 'Normal')
+        return bool(self._zone['state'] != 'Normal')

    def update(self):
        """Get updated stats from API."""
@@ -0,0 +1,97 @@
+"""
+Support for deCONZ binary sensor.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/binary_sensor.deconz/
+"""
+
+import asyncio
+
+from homeassistant.components.binary_sensor import BinarySensorDevice
+from homeassistant.components.deconz import DOMAIN as DECONZ_DATA
+from homeassistant.const import ATTR_BATTERY_LEVEL
+from homeassistant.core import callback
+
+DEPENDENCIES = ['deconz']
+
+
+@asyncio.coroutine
+def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
+    """Setup binary sensor for deCONZ component."""
+    if discovery_info is None:
+        return
+
+    from pydeconz.sensor import DECONZ_BINARY_SENSOR
+    sensors = hass.data[DECONZ_DATA].sensors
+    entities = []
+
+    for sensor in sensors.values():
+        if sensor.type in DECONZ_BINARY_SENSOR:
+            entities.append(DeconzBinarySensor(sensor))
+    async_add_devices(entities, True)
+
+
+class DeconzBinarySensor(BinarySensorDevice):
+    """Representation of a binary sensor."""
+
+    def __init__(self, sensor):
+        """Setup sensor and add update callback to get data from websocket."""
+        self._sensor = sensor
+
+    @asyncio.coroutine
+    def async_added_to_hass(self):
+        """Subscribe sensors events."""
+        self._sensor.register_async_callback(self.async_update_callback)
+
+    @callback
+    def async_update_callback(self, reason):
+        """Update the sensor's state.
+
+        If reason is that state is updated,
+        or reachable has changed or battery has changed.
+        """
+        if reason['state'] or \
+           'reachable' in reason['attr'] or \
+           'battery' in reason['attr']:
+            self.async_schedule_update_ha_state()
+
+    @property
+    def is_on(self):
+        """Return true if sensor is on."""
+        return self._sensor.is_tripped
+
+    @property
+    def name(self):
+        """Return the name of the sensor."""
+        return self._sensor.name
+
+    @property
+    def device_class(self):
+        """Class of the sensor."""
+        return self._sensor.sensor_class
+
+    @property
+    def icon(self):
+        """Return the icon to use in the frontend."""
+        return self._sensor.sensor_icon
+
+    @property
+    def available(self):
+        """Return True if sensor is available."""
+        return self._sensor.reachable
+
+    @property
+    def should_poll(self):
+        """No polling needed."""
+        return False
+
+    @property
+    def device_state_attributes(self):
+        """Return the state attributes of the sensor."""
+        from pydeconz.sensor import PRESENCE
+        attr = {
+            ATTR_BATTERY_LEVEL: self._sensor.battery,
+        }
+        if self._sensor.type == PRESENCE:
+            attr['dark'] = self._sensor.dark
+        return attr
@@ -1,60 +0,0 @@
-"""Support for reading binary states from a DoorBird video doorbell."""
-from datetime import timedelta
-import logging
-
-from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.components.doorbird import DOMAIN as DOORBIRD_DOMAIN
-from homeassistant.util import Throttle
-
-DEPENDENCIES = ['doorbird']
-
-_LOGGER = logging.getLogger(__name__)
-_MIN_UPDATE_INTERVAL = timedelta(milliseconds=250)
-
-SENSOR_TYPES = {
-    "doorbell": {
-        "name": "Doorbell Ringing",
-        "icon": {
-            True: "bell-ring",
-            False: "bell",
-            None: "bell-outline"
-        }
-    }
-}
-
-
-def setup_platform(hass, config, add_devices, discovery_info=None):
-    """Set up the DoorBird binary sensor component."""
-    device = hass.data.get(DOORBIRD_DOMAIN)
-    add_devices([DoorBirdBinarySensor(device, "doorbell")], True)
-
-
-class DoorBirdBinarySensor(BinarySensorDevice):
-    """A binary sensor of a DoorBird device."""
-
-    def __init__(self, device, sensor_type):
-        """Initialize a binary sensor on a DoorBird device."""
-        self._device = device
-        self._sensor_type = sensor_type
-        self._state = None
-
-    @property
-    def name(self):
-        """Get the name of the sensor."""
-        return SENSOR_TYPES[self._sensor_type]["name"]
-
-    @property
-    def icon(self):
-        """Get an icon to display."""
-        state_icon = SENSOR_TYPES[self._sensor_type]["icon"][self._state]
-        return "mdi:{}".format(state_icon)
-
-    @property
-    def is_on(self):
-        """Get the state of the binary sensor."""
-        return self._state
-
-    @Throttle(_MIN_UPDATE_INTERVAL)
-    def update(self):
-        """Pull the latest value from the device."""
-        self._state = self._device.doorbell_state()
@@ -12,7 +12,8 @@ from typing import Callable  # noqa

 from homeassistant.core import callback
 from homeassistant.components.binary_sensor import BinarySensorDevice, DOMAIN
-import homeassistant.components.isy994 as isy
+from homeassistant.components.isy994 import (ISY994_NODES, ISY994_PROGRAMS,
+                                             ISYDevice)
 from homeassistant.const import STATE_ON, STATE_OFF
 from homeassistant.helpers.typing import ConfigType
 from homeassistant.helpers.event import async_track_point_in_utc_time
@@ -20,9 +21,6 @@ from homeassistant.util import dt as dt_util

 _LOGGER = logging.getLogger(__name__)

-UOM = ['2', '78']
-STATES = [STATE_OFF, STATE_ON, 'true', 'false']
-
 ISY_DEVICE_TYPES = {
    'moisture': ['16.8', '16.13', '16.14'],
    'opening': ['16.9', '16.6', '16.7', '16.2', '16.17', '16.20', '16.21'],
@@ -34,16 +32,11 @@ ISY_DEVICE_TYPES = {
 def setup_platform(hass, config: ConfigType,
                   add_devices: Callable[[list], None], discovery_info=None):
    """Set up the ISY994 binary sensor platform."""
-    if isy.ISY is None or not isy.ISY.connected:
-        _LOGGER.error("A connection has not been made to the ISY controller")
-        return False
-
    devices = []
    devices_by_nid = {}
    child_nodes = []

-    for node in isy.filter_nodes(isy.SENSOR_NODES, units=UOM,
-                                 states=STATES):
+    for node in hass.data[ISY994_NODES][DOMAIN]:
        if node.parent_node is None:
            device = ISYBinarySensorDevice(node)
            devices.append(device)
@@ -62,10 +55,9 @@ def setup_platform(hass, config: ConfigType,
                          node.nid, node.parent_nid)
        else:
            device_type = _detect_device_type(node)
-            if device_type in ['moisture', 'opening']:
-                subnode_id = int(node.nid[-1])
-                # Leak and door/window sensors work the same way with negative
-                # nodes and heartbeat nodes
+            subnode_id = int(node.nid[-1])
+            if device_type == 'opening':
+                # Door/window sensors use an optional "negative" node
                if subnode_id == 4:
                    # Subnode 4 is the heartbeat node, which we will represent
                    # as a separate binary_sensor
@@ -74,19 +66,22 @@ def setup_platform(hass, config: ConfigType,
                    devices.append(device)
                elif subnode_id == 2:
                    parent_device.add_negative_node(node)
+            elif device_type == 'moisture':
+                # Moisure nodes have a subnode 2, but we ignore it because it's
+                # just the inverse of the primary node.
+                if subnode_id == 4:
+                    # Heartbeat node
+                    device = ISYBinarySensorHeartbeat(node, parent_device)
+                    parent_device.add_heartbeat_device(device)
+                    devices.append(device)
            else:
                # We don't yet have any special logic for other sensor types,
                # so add the nodes as individual devices
                device = ISYBinarySensorDevice(node)
                devices.append(device)

-    for program in isy.PROGRAMS.get(DOMAIN, []):
-        try:
-            status = program[isy.KEY_STATUS]
-        except (KeyError, AssertionError):
-            pass
-        else:
-            devices.append(ISYBinarySensorProgram(program.name, status))
+    for name, status, _ in hass.data[ISY994_PROGRAMS][DOMAIN]:
+        devices.append(ISYBinarySensorProgram(name, status))

    add_devices(devices)

@@ -111,7 +106,7 @@ def _is_val_unknown(val):
    return val == -1*float('inf')


-class ISYBinarySensorDevice(isy.ISYDevice, BinarySensorDevice):
+class ISYBinarySensorDevice(ISYDevice, BinarySensorDevice):
    """Representation of an ISY994 binary sensor device.

    Often times, a single device is represented by multiple nodes in the ISY,
@@ -165,7 +160,8 @@ class ISYBinarySensorDevice(isy.ISYDevice, BinarySensorDevice):
        """
        self._negative_node = child

-        if not _is_val_unknown(self._negative_node):
+        # pylint: disable=protected-access
+        if not _is_val_unknown(self._negative_node.status._val):
            # If the negative node has a value, it means the negative node is
            # in use for this device. Therefore, we cannot determine the state
            # of the sensor until we receive our first ON event.
@@ -250,7 +246,7 @@ class ISYBinarySensorDevice(isy.ISYDevice, BinarySensorDevice):
        return self._device_class_from_type


-class ISYBinarySensorHeartbeat(isy.ISYDevice, BinarySensorDevice):
+class ISYBinarySensorHeartbeat(ISYDevice, BinarySensorDevice):
    """Representation of the battery state of an ISY994 sensor."""

    def __init__(self, node, parent_device) -> None:
@@ -353,7 +349,7 @@ class ISYBinarySensorHeartbeat(isy.ISYDevice, BinarySensorDevice):
        return attr


-class ISYBinarySensorProgram(isy.ISYDevice, BinarySensorDevice):
+class ISYBinarySensorProgram(ISYDevice, BinarySensorDevice):
    """Representation of an ISY994 binary sensor program.

    This does not need all of the subnode logic in the device version of binary
@@ -129,6 +129,11 @@ class KNXBinarySensor(BinarySensorDevice):
        """Return the name of the KNX device."""
        return self.device.name

+    @property
+    def available(self):
+        """Return True if entity is available."""
+        return self.hass.data[DATA_KNX].connected
+
    @property
    def should_poll(self):
        """No polling needed within KNX."""
@@ -17,19 +17,15 @@ from homeassistant.const import (
    CONF_NAME, CONF_VALUE_TEMPLATE, CONF_PAYLOAD_ON, CONF_PAYLOAD_OFF,
    CONF_DEVICE_CLASS)
 from homeassistant.components.mqtt import (
-    CONF_STATE_TOPIC, CONF_AVAILABILITY_TOPIC, CONF_QOS, valid_subscribe_topic)
+    CONF_STATE_TOPIC, CONF_AVAILABILITY_TOPIC, CONF_PAYLOAD_AVAILABLE,
+    CONF_PAYLOAD_NOT_AVAILABLE, CONF_QOS, MqttAvailability)
 import homeassistant.helpers.config_validation as cv

 _LOGGER = logging.getLogger(__name__)

-CONF_PAYLOAD_AVAILABLE = 'payload_available'
-CONF_PAYLOAD_NOT_AVAILABLE = 'payload_not_available'
-
 DEFAULT_NAME = 'MQTT Binary sensor'
 DEFAULT_PAYLOAD_OFF = 'OFF'
 DEFAULT_PAYLOAD_ON = 'ON'
-DEFAULT_PAYLOAD_AVAILABLE = 'online'
-DEFAULT_PAYLOAD_NOT_AVAILABLE = 'offline'

 DEPENDENCIES = ['mqtt']

@@ -38,12 +34,7 @@ PLATFORM_SCHEMA = mqtt.MQTT_RO_PLATFORM_SCHEMA.extend({
    vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF): cv.string,
    vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON): cv.string,
    vol.Optional(CONF_DEVICE_CLASS): DEVICE_CLASSES_SCHEMA,
-    vol.Optional(CONF_AVAILABILITY_TOPIC): valid_subscribe_topic,
-    vol.Optional(CONF_PAYLOAD_AVAILABLE,
-                 default=DEFAULT_PAYLOAD_AVAILABLE): cv.string,
-    vol.Optional(CONF_PAYLOAD_NOT_AVAILABLE,
-                 default=DEFAULT_PAYLOAD_NOT_AVAILABLE): cv.string,
-})
+}).extend(mqtt.MQTT_AVAILABILITY_SCHEMA.schema)


@asyncio.coroutine
@@ -70,31 +61,29 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    )])


-class MqttBinarySensor(BinarySensorDevice):
+class MqttBinarySensor(MqttAvailability, BinarySensorDevice):
    """Representation a binary sensor that is updated by MQTT."""

    def __init__(self, name, state_topic, availability_topic, device_class,
                 qos, payload_on, payload_off, payload_available,
                 payload_not_available, value_template):
        """Initialize the MQTT binary sensor."""
+        super().__init__(availability_topic, qos, payload_available,
+                         payload_not_available)
        self._name = name
        self._state = None
        self._state_topic = state_topic
-        self._availability_topic = availability_topic
-        self._available = True if availability_topic is None else False
        self._device_class = device_class
        self._payload_on = payload_on
        self._payload_off = payload_off
-        self._payload_available = payload_available
-        self._payload_not_available = payload_not_available
        self._qos = qos
        self._template = value_template

+    @asyncio.coroutine
    def async_added_to_hass(self):
-        """Subscribe mqtt events.
+        """Subscribe mqtt events."""
+        yield from super().async_added_to_hass()

-        This method must be run in the event loop and returns a coroutine.
-        """
        @callback
        def state_message_received(topic, payload, qos):
            """Handle a new received MQTT state message."""
@@ -111,21 +100,6 @@ class MqttBinarySensor(BinarySensorDevice):
        yield from mqtt.async_subscribe(
            self.hass, self._state_topic, state_message_received, self._qos)

-        @callback
-        def availability_message_received(topic, payload, qos):
-            """Handle a new received MQTT availability message."""
-            if payload == self._payload_available:
-                self._available = True
-            elif payload == self._payload_not_available:
-                self._available = False
-
-            self.async_schedule_update_ha_state()
-
-        if self._availability_topic is not None:
-            yield from mqtt.async_subscribe(
-                self.hass, self._availability_topic,
-                availability_message_received, self._qos)
-
    @property
    def should_poll(self):
        """Return the polling state."""
@@ -136,11 +110,6 @@ class MqttBinarySensor(BinarySensorDevice):
        """Return the name of the binary sensor."""
        return self._name

-    @property
-    def available(self) -> bool:
-        """Return if the binary sensor is available."""
-        return self._available
-
    @property
    def is_on(self):
        """Return true if the binary sensor is on."""
@@ -98,6 +98,11 @@ class RestBinarySensor(BinarySensorDevice):
        """Return the class of this sensor."""
        return self._device_class

+    @property
+    def available(self):
+        """Return the availability of this sensor."""
+        return self.rest.data is not None
+
    @property
    def is_on(self):
        """Return true if the binary sensor is on."""
@@ -7,30 +7,40 @@ tested. Other types may need some work.
 """

 import logging
+
 import voluptuous as vol
+
+from homeassistant.const import (
+    CONF_DEVICE_CLASS, CONF_COMMAND_ON, CONF_COMMAND_OFF, CONF_NAME)
 from homeassistant.components import rfxtrx
+from homeassistant.helpers import event as evt
+from homeassistant.helpers import config_validation as cv
+from homeassistant.components.binary_sensor import (
+    BinarySensorDevice, PLATFORM_SCHEMA)
+from homeassistant.components.rfxtrx import (
+    ATTR_NAME, ATTR_DATA_BITS, ATTR_OFF_DELAY, ATTR_FIRE_EVENT,
+    CONF_AUTOMATIC_ADD, CONF_FIRE_EVENT,
+    CONF_DATA_BITS, CONF_DEVICES)
 from homeassistant.util import slugify
 from homeassistant.util import dt as dt_util
-from homeassistant.helpers import config_validation as cv
-from homeassistant.helpers import event as evt
-from homeassistant.components.binary_sensor import BinarySensorDevice
-from homeassistant.components.rfxtrx import (
-    ATTR_AUTOMATIC_ADD, ATTR_NAME, ATTR_OFF_DELAY, ATTR_FIREEVENT,
-    ATTR_DATA_BITS, CONF_DEVICES
-)
-from homeassistant.const import (
-    CONF_DEVICE_CLASS, CONF_COMMAND_ON, CONF_COMMAND_OFF
-)
+

 DEPENDENCIES = ["rfxtrx"]

 _LOGGER = logging.getLogger(__name__)

-PLATFORM_SCHEMA = vol.Schema({
-    vol.Required("platform"): rfxtrx.DOMAIN,
-    vol.Optional(CONF_DEVICES, default={}): vol.All(
-        dict, rfxtrx.valid_binary_sensor),
-    vol.Optional(ATTR_AUTOMATIC_ADD, default=False):  cv.boolean,
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_DEVICES, default={}): {
+        cv.string: vol.Schema({
+            vol.Optional(CONF_NAME): cv.string,
+            vol.Optional(CONF_DEVICE_CLASS): cv.string,
+            vol.Optional(CONF_FIRE_EVENT, default=False): cv.boolean,
+            vol.Optional(CONF_DATA_BITS): cv.positive_int,
+            vol.Optional(CONF_COMMAND_ON): cv.byte,
+            vol.Optional(CONF_COMMAND_OFF): cv.byte
+        })
+    },
+    vol.Optional(CONF_AUTOMATIC_ADD, default=False):  cv.boolean,
 }, extra=vol.ALLOW_EXTRA)


@@ -46,17 +56,17 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
        if device_id in rfxtrx.RFX_DEVICES:
            continue

-        if entity[ATTR_DATA_BITS] is not None:
-            _LOGGER.info("Masked device id: %s",
-                         rfxtrx.get_pt2262_deviceid(device_id,
-                                                    entity[ATTR_DATA_BITS]))
+        if entity[CONF_DATA_BITS] is not None:
+            _LOGGER.debug("Masked device id: %s",
+                          rfxtrx.get_pt2262_deviceid(device_id,
+                                                     entity[ATTR_DATA_BITS]))

-        _LOGGER.info("Add %s rfxtrx.binary_sensor (class %s)",
-                     entity[ATTR_NAME], entity[CONF_DEVICE_CLASS])
+        _LOGGER.debug("Add %s rfxtrx.binary_sensor (class %s)",
+                      entity[ATTR_NAME], entity[CONF_DEVICE_CLASS])

        device = RfxtrxBinarySensor(event, entity[ATTR_NAME],
                                    entity[CONF_DEVICE_CLASS],
-                                    entity[ATTR_FIREEVENT],
+                                    entity[ATTR_FIRE_EVENT],
                                    entity[ATTR_OFF_DELAY],
                                    entity[ATTR_DATA_BITS],
                                    entity[CONF_COMMAND_ON],
@@ -82,15 +92,15 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):

        if sensor is None:
            # Add the entity if not exists and automatic_add is True
-            if not config[ATTR_AUTOMATIC_ADD]:
+            if not config[CONF_AUTOMATIC_ADD]:
                return

            if event.device.packettype == 0x13:
                poss_dev = rfxtrx.find_possible_pt2262_device(device_id)
                if poss_dev is not None:
                    poss_id = slugify(poss_dev.event.device.id_string.lower())
-                    _LOGGER.info("Found possible matching deviceid %s.",
-                                 poss_id)
+                    _LOGGER.debug("Found possible matching deviceid %s.",
+                                  poss_id)

            pkt_id = "".join("{0:02x}".format(x) for x in event.data)
            sensor = RfxtrxBinarySensor(event, pkt_id)
@@ -107,11 +117,11 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
        elif not isinstance(sensor, RfxtrxBinarySensor):
            return
        else:
-            _LOGGER.info("Binary sensor update "
-                         "(Device_id: %s Class: %s Sub: %s)",
-                         slugify(event.device.id_string.lower()),
-                         event.device.__class__.__name__,
-                         event.device.subtype)
+            _LOGGER.debug("Binary sensor update "
+                          "(Device_id: %s Class: %s Sub: %s)",
+                          slugify(event.device.id_string.lower()),
+                          event.device.__class__.__name__,
+                          event.device.subtype)

        if sensor.is_lighting4:
            if sensor.data_bits is not None:
@@ -163,10 +173,8 @@ class RfxtrxBinarySensor(BinarySensorDevice):
            self._masked_id = rfxtrx.get_pt2262_deviceid(
                event.device.id_string.lower(),
                data_bits)
-
-    def __str__(self):
-        """Return the name of the sensor."""
-        return self._name
+        else:
+            self._masked_id = None

    @property
    def name(self):
@@ -38,6 +38,11 @@ SENSOR_SCHEMA = vol.Schema({
        vol.All(cv.time_period, cv.positive_timedelta),
 })

+SENSOR_SCHEMA = vol.All(
+    cv.deprecated(ATTR_ENTITY_ID),
+    SENSOR_SCHEMA,
+)
+
 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_SENSORS): vol.Schema({cv.slug: SENSOR_SCHEMA}),
 })
@@ -9,40 +9,48 @@ import logging

 import voluptuous as vol

-import homeassistant.helpers.config_validation as cv
 from homeassistant.components.binary_sensor import (
-    BinarySensorDevice, PLATFORM_SCHEMA, DEVICE_CLASSES_SCHEMA)
+    DEVICE_CLASSES_SCHEMA, PLATFORM_SCHEMA, BinarySensorDevice)
 from homeassistant.const import (
-    CONF_NAME, CONF_ENTITY_ID, CONF_TYPE, STATE_UNKNOWN,
-    ATTR_ENTITY_ID, CONF_DEVICE_CLASS)
+    ATTR_ENTITY_ID, CONF_DEVICE_CLASS, CONF_ENTITY_ID, CONF_NAME,
+    STATE_UNKNOWN)
 from homeassistant.core import callback
+import homeassistant.helpers.config_validation as cv
 from homeassistant.helpers.event import async_track_state_change

 _LOGGER = logging.getLogger(__name__)

 ATTR_HYSTERESIS = 'hysteresis'
+ATTR_LOWER = 'lower'
+ATTR_POSITION = 'position'
 ATTR_SENSOR_VALUE = 'sensor_value'
-ATTR_THRESHOLD = 'threshold'
 ATTR_TYPE = 'type'
+ATTR_UPPER = 'upper'

 CONF_HYSTERESIS = 'hysteresis'
 CONF_LOWER = 'lower'
-CONF_THRESHOLD = 'threshold'
 CONF_UPPER = 'upper'

 DEFAULT_NAME = 'Threshold'
 DEFAULT_HYSTERESIS = 0.0

-SENSOR_TYPES = [CONF_LOWER, CONF_UPPER]
+POSITION_ABOVE = 'above'
+POSITION_BELOW = 'below'
+POSITION_IN_RANGE = 'in_range'
+POSITION_UNKNOWN = 'unknown'
+
+TYPE_LOWER = 'lower'
+TYPE_RANGE = 'range'
+TYPE_UPPER = 'upper'

 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_ENTITY_ID): cv.entity_id,
-    vol.Required(CONF_THRESHOLD): vol.Coerce(float),
-    vol.Required(CONF_TYPE): vol.In(SENSOR_TYPES),
-    vol.Optional(
-        CONF_HYSTERESIS, default=DEFAULT_HYSTERESIS): vol.Coerce(float),
-    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
    vol.Optional(CONF_DEVICE_CLASS): DEVICE_CLASSES_SCHEMA,
+    vol.Optional(CONF_HYSTERESIS, default=DEFAULT_HYSTERESIS):
+        vol.Coerce(float),
+    vol.Optional(CONF_LOWER): vol.Coerce(float),
+    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
+    vol.Optional(CONF_UPPER): vol.Coerce(float),
 })


@@ -51,47 +59,44 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    """Set up the Threshold sensor."""
    entity_id = config.get(CONF_ENTITY_ID)
    name = config.get(CONF_NAME)
-    threshold = config.get(CONF_THRESHOLD)
+    lower = config.get(CONF_LOWER)
+    upper = config.get(CONF_UPPER)
    hysteresis = config.get(CONF_HYSTERESIS)
-    limit_type = config.get(CONF_TYPE)
    device_class = config.get(CONF_DEVICE_CLASS)

    async_add_devices([ThresholdSensor(
-        hass, entity_id, name, threshold,
-        hysteresis, limit_type, device_class)
-                      ], True)
-
-    return True
+        hass, entity_id, name, lower, upper, hysteresis, device_class)], True)


 class ThresholdSensor(BinarySensorDevice):
    """Representation of a Threshold sensor."""

-    def __init__(self, hass, entity_id, name, threshold,
-                 hysteresis, limit_type, device_class):
+    def __init__(self, hass, entity_id, name, lower, upper, hysteresis,
+                 device_class):
        """Initialize the Threshold sensor."""
        self._hass = hass
        self._entity_id = entity_id
-        self.is_upper = limit_type == 'upper'
        self._name = name
-        self._threshold = threshold
+        self._threshold_lower = lower
+        self._threshold_upper = upper
        self._hysteresis = hysteresis
        self._device_class = device_class
-        self._state = False
-        self.sensor_value = 0

-        @callback
+        self._state_position = None
+        self._state = False
+        self.sensor_value = None
+
        # pylint: disable=invalid-name
+        @callback
        def async_threshold_sensor_state_listener(
                entity, old_state, new_state):
            """Handle sensor state changes."""
-            if new_state.state == STATE_UNKNOWN:
-                return
-
            try:
-                self.sensor_value = float(new_state.state)
-            except ValueError:
-                _LOGGER.error("State is not numerical")
+                self.sensor_value = None if new_state.state == STATE_UNKNOWN \
+                    else float(new_state.state)
+            except (ValueError, TypeError):
+                self.sensor_value = None
+                _LOGGER.warning("State is not numerical")

            hass.async_add_job(self.async_update_ha_state, True)

@@ -118,23 +123,67 @@ class ThresholdSensor(BinarySensorDevice):
        """Return the sensor class of the sensor."""
        return self._device_class

+    @property
+    def threshold_type(self):
+        """Return the type of threshold this sensor represents."""
+        if self._threshold_lower and self._threshold_upper:
+            return TYPE_RANGE
+        elif self._threshold_lower:
+            return TYPE_LOWER
+        elif self._threshold_upper:
+            return TYPE_UPPER
+
    @property
    def device_state_attributes(self):
        """Return the state attributes of the sensor."""
        return {
            ATTR_ENTITY_ID: self._entity_id,
-            ATTR_SENSOR_VALUE: self.sensor_value,
-            ATTR_THRESHOLD: self._threshold,
            ATTR_HYSTERESIS: self._hysteresis,
-            ATTR_TYPE: CONF_UPPER if self.is_upper else CONF_LOWER,
+            ATTR_LOWER: self._threshold_lower,
+            ATTR_POSITION: self._state_position,
+            ATTR_SENSOR_VALUE: self.sensor_value,
+            ATTR_TYPE: self.threshold_type,
+            ATTR_UPPER: self._threshold_upper,
        }

    @asyncio.coroutine
    def async_update(self):
        """Get the latest data and updates the states."""
-        if self._hysteresis == 0 and self.sensor_value == self._threshold:
+        def below(threshold):
+            """Determine if the sensor value is below a threshold."""
+            return self.sensor_value < (threshold - self._hysteresis)
+
+        def above(threshold):
+            """Determine if the sensor value is above a threshold."""
+            return self.sensor_value > (threshold + self._hysteresis)
+
+        if self.sensor_value is None:
+            self._state_position = POSITION_UNKNOWN
            self._state = False
-        elif self.sensor_value > (self._threshold + self._hysteresis):
-            self._state = self.is_upper
-        elif self.sensor_value < (self._threshold - self._hysteresis):
-            self._state = not self.is_upper
+
+        elif self.threshold_type == TYPE_LOWER:
+            if below(self._threshold_lower):
+                self._state_position = POSITION_BELOW
+                self._state = True
+            elif above(self._threshold_lower):
+                self._state_position = POSITION_ABOVE
+                self._state = False
+
+        elif self.threshold_type == TYPE_UPPER:
+            if above(self._threshold_upper):
+                self._state_position = POSITION_ABOVE
+                self._state = True
+            elif below(self._threshold_upper):
+                self._state_position = POSITION_BELOW
+                self._state = False
+
+        elif self.threshold_type == TYPE_RANGE:
+            if below(self._threshold_lower):
+                self._state_position = POSITION_BELOW
+                self._state = False
+            if above(self._threshold_upper):
+                self._state_position = POSITION_ABOVE
+                self._state = False
+            elif above(self._threshold_lower) and below(self._threshold_upper):
+                self._state_position = POSITION_IN_RANGE
+                self._state = True
@@ -11,21 +11,19 @@ import math

 import voluptuous as vol

+from homeassistant.components.binary_sensor import (
+    DEVICE_CLASSES_SCHEMA, ENTITY_ID_FORMAT, PLATFORM_SCHEMA,
+    BinarySensorDevice)
+from homeassistant.const import (
+    ATTR_ENTITY_ID, ATTR_FRIENDLY_NAME, CONF_DEVICE_CLASS, CONF_ENTITY_ID,
+    CONF_FRIENDLY_NAME, STATE_UNKNOWN)
 from homeassistant.core import callback
 import homeassistant.helpers.config_validation as cv
-
-from homeassistant.components.binary_sensor import (
-    BinarySensorDevice, ENTITY_ID_FORMAT, PLATFORM_SCHEMA,
-    DEVICE_CLASSES_SCHEMA)
-from homeassistant.const import (
-    ATTR_ENTITY_ID, ATTR_FRIENDLY_NAME,
-    CONF_DEVICE_CLASS, CONF_ENTITY_ID, CONF_FRIENDLY_NAME,
-    STATE_UNKNOWN)
 from homeassistant.helpers.entity import generate_entity_id
 from homeassistant.helpers.event import async_track_state_change
 from homeassistant.util import utcnow

-REQUIREMENTS = ['numpy==1.13.3']
+REQUIREMENTS = ['numpy==1.14.0']

 _LOGGER = logging.getLogger(__name__)

@@ -36,21 +34,21 @@ ATTR_INVERT = 'invert'
 ATTR_SAMPLE_DURATION = 'sample_duration'
 ATTR_SAMPLE_COUNT = 'sample_count'

-CONF_SENSORS = 'sensors'
 CONF_ATTRIBUTE = 'attribute'
+CONF_INVERT = 'invert'
 CONF_MAX_SAMPLES = 'max_samples'
 CONF_MIN_GRADIENT = 'min_gradient'
-CONF_INVERT = 'invert'
 CONF_SAMPLE_DURATION = 'sample_duration'
+CONF_SENSORS = 'sensors'

 SENSOR_SCHEMA = vol.Schema({
    vol.Required(CONF_ENTITY_ID): cv.entity_id,
    vol.Optional(CONF_ATTRIBUTE): cv.string,
    vol.Optional(CONF_DEVICE_CLASS): DEVICE_CLASSES_SCHEMA,
    vol.Optional(CONF_FRIENDLY_NAME): cv.string,
+    vol.Optional(CONF_INVERT, default=False): cv.boolean,
    vol.Optional(CONF_MAX_SAMPLES, default=2): cv.positive_int,
    vol.Optional(CONF_MIN_GRADIENT, default=0.0): vol.Coerce(float),
-    vol.Optional(CONF_INVERT, default=False): cv.boolean,
    vol.Optional(CONF_SAMPLE_DURATION, default=0): cv.positive_int,
 })

@@ -129,11 +127,11 @@ class SensorTrend(BinarySensorDevice):
        return {
            ATTR_ENTITY_ID: self._entity_id,
            ATTR_FRIENDLY_NAME: self._name,
-            ATTR_INVERT: self._invert,
            ATTR_GRADIENT: self._gradient,
+            ATTR_INVERT: self._invert,
            ATTR_MIN_GRADIENT: self._min_gradient,
-            ATTR_SAMPLE_DURATION: self._sample_duration,
            ATTR_SAMPLE_COUNT: len(self.samples),
+            ATTR_SAMPLE_DURATION: self._sample_duration,
        }

    @property
@@ -64,7 +64,7 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
    excludes = config.get(CONF_EXCLUDES)
    days_offset = config.get(CONF_OFFSET)

-    year = (datetime.now() + timedelta(days=days_offset)).year
+    year = (get_date(datetime.today()) + timedelta(days=days_offset)).year
    obj_holidays = getattr(holidays, country)(years=year)

    if province:
@@ -99,6 +99,11 @@ def day_to_string(day):
        return None


+def get_date(date):
+    """Return date. Needed for testing."""
+    return date
+
+
 class IsWorkdaySensor(BinarySensorDevice):
    """Implementation of a Workday sensor."""

@@ -156,7 +161,7 @@ class IsWorkdaySensor(BinarySensorDevice):
        self._state = False

        # Get iso day of the week (1 = Monday, 7 = Sunday)
-        date = datetime.today() + timedelta(days=self._days_offset)
+        date = get_date(datetime.today()) + timedelta(days=self._days_offset)
        day = date.isoweekday() - 1
        day_of_week = day_to_string(day)

@@ -25,11 +25,11 @@ CONF_DEVICE_ID = 'device_id'
 CONF_CALENDARS = 'calendars'
 CONF_CUSTOM_CALENDARS = 'custom_calendars'
 CONF_CALENDAR = 'calendar'
-CONF_ALL_DAY = 'all_day'
 CONF_SEARCH = 'search'

 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
-    vol.Required(CONF_URL): vol.Url,
+    # pylint: disable=no-value-for-parameter
+    vol.Required(CONF_URL): vol.Url(),
    vol.Optional(CONF_CALENDARS, default=[]):
        vol.All(cv.ensure_list, vol.Schema([
            cv.string
@@ -88,7 +88,7 @@ def setup_platform(hass, config, add_devices, disc_info=None):
                WebDavCalendarEventDevice(hass,
                                          device_data,
                                          calendar,
-                                          cust_calendar.get(CONF_ALL_DAY),
+                                          True,
                                          cust_calendar.get(CONF_SEARCH))
                )

@@ -9,7 +9,6 @@ https://home-assistant.io/components/calendar.todoist/
 from datetime import datetime
 from datetime import timedelta
 import logging
-import os

 import voluptuous as vol

@@ -17,7 +16,6 @@ from homeassistant.components.calendar import (
    CalendarEventDevice, PLATFORM_SCHEMA)
 from homeassistant.components.google import (
    CONF_DEVICE_ID)
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (
    CONF_ID, CONF_NAME, CONF_TOKEN)
 import homeassistant.helpers.config_validation as cv
@@ -178,10 +176,6 @@ def setup_platform(hass, config, add_devices, discovery_info=None):

    add_devices(project_devices)

-    # Services:
-    descriptions = load_yaml_config_file(
-        os.path.join(os.path.dirname(__file__), 'services.yaml'))
-
    def handle_new_task(call):
        """Called when a user creates a new Todoist Task from HASS."""
        project_name = call.data[PROJECT_NAME]
@@ -215,7 +209,6 @@ def setup_platform(hass, config, add_devices, discovery_info=None):
        _LOGGER.debug("Created Todoist task: %s", call.data[CONTENT])

    hass.services.register(DOMAIN, SERVICE_NEW_TASK, handle_new_task,
-                           descriptions[DOMAIN][SERVICE_NEW_TASK],
                           schema=NEW_TASK_SERVICE_SCHEMA)


@@ -12,7 +12,6 @@ from datetime import timedelta
 import logging
 import hashlib
 from random import SystemRandom
-import os

 import aiohttp
 from aiohttp import web
@@ -21,7 +20,6 @@ import voluptuous as vol

 from homeassistant.core import callback
 from homeassistant.const import (ATTR_ENTITY_ID, ATTR_ENTITY_PICTURE)
-from homeassistant.config import load_yaml_config_file
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.loader import bind_hass
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
@@ -190,19 +188,14 @@ def async_setup(hass, config):
            except OSError as err:
                _LOGGER.error("Can't write image to file: %s", err)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    hass.services.async_register(
        DOMAIN, SERVICE_ENABLE_MOTION, async_handle_camera_service,
-        descriptions.get(SERVICE_ENABLE_MOTION), schema=CAMERA_SERVICE_SCHEMA)
+        schema=CAMERA_SERVICE_SCHEMA)
    hass.services.async_register(
        DOMAIN, SERVICE_DISABLE_MOTION, async_handle_camera_service,
-        descriptions.get(SERVICE_DISABLE_MOTION), schema=CAMERA_SERVICE_SCHEMA)
+        schema=CAMERA_SERVICE_SCHEMA)
    hass.services.async_register(
        DOMAIN, SERVICE_SNAPSHOT, async_handle_snapshot_service,
-        descriptions.get(SERVICE_SNAPSHOT),
        schema=CAMERA_SERVICE_SNAPSHOT)

    return True
@@ -1,51 +1,40 @@
-"""Support for viewing the camera feed from a DoorBird video doorbell."""
+"""
+Support for viewing the camera feed from a DoorBird video doorbell.

+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.doorbird/
+"""
 import asyncio
 import datetime
 import logging
-import voluptuous as vol

 import aiohttp
 import async_timeout

-from homeassistant.components.camera import PLATFORM_SCHEMA, Camera
+from homeassistant.components.camera import Camera
 from homeassistant.components.doorbird import DOMAIN as DOORBIRD_DOMAIN
-from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.aiohttp_client import async_get_clientsession

 DEPENDENCIES = ['doorbird']

-_CAMERA_LIVE = "DoorBird Live"
 _CAMERA_LAST_VISITOR = "DoorBird Last Ring"
-_LIVE_INTERVAL = datetime.timedelta(seconds=1)
+_CAMERA_LIVE = "DoorBird Live"
 _LAST_VISITOR_INTERVAL = datetime.timedelta(minutes=1)
+_LIVE_INTERVAL = datetime.timedelta(seconds=1)
 _LOGGER = logging.getLogger(__name__)
 _TIMEOUT = 10  # seconds

-CONF_SHOW_LAST_VISITOR = 'last_visitor'
-
-PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
-    vol.Optional(CONF_SHOW_LAST_VISITOR, default=False): cv.boolean
-})
-

@asyncio.coroutine
 def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    """Set up the DoorBird camera platform."""
    device = hass.data.get(DOORBIRD_DOMAIN)
-
-    _LOGGER.debug("Adding DoorBird camera %s", _CAMERA_LIVE)
-    entities = [DoorBirdCamera(device.live_image_url, _CAMERA_LIVE,
-                               _LIVE_INTERVAL)]
-
-    if config.get(CONF_SHOW_LAST_VISITOR):
-        _LOGGER.debug("Adding DoorBird camera %s", _CAMERA_LAST_VISITOR)
-        entities.append(DoorBirdCamera(device.history_image_url(1),
-                                       _CAMERA_LAST_VISITOR,
-                                       _LAST_VISITOR_INTERVAL))
-
-    async_add_devices(entities)
-    _LOGGER.info("Added DoorBird camera(s)")
+    async_add_devices([
+        DoorBirdCamera(device.live_image_url, _CAMERA_LIVE, _LIVE_INTERVAL),
+        DoorBirdCamera(
+            device.history_image_url(1, 'doorbell'), _CAMERA_LAST_VISITOR,
+            _LAST_VISITOR_INTERVAL),
+    ])


 class DoorBirdCamera(Camera):
@@ -75,7 +64,6 @@ class DoorBirdCamera(Camera):

        try:
            websession = async_get_clientsession(self.hass)
-
            with async_timeout.timeout(_TIMEOUT, loop=self.hass.loop):
                response = yield from websession.get(self._url)

@@ -60,11 +60,9 @@ class MqttCamera(Camera):
        """Return the name of this camera."""
        return self._name

+    @asyncio.coroutine
    def async_added_to_hass(self):
-        """Subscribe MQTT events.
-
-        This method must be run in the event loop and returns a coroutine.
-        """
+        """Subscribe MQTT events."""
        @callback
        def message_received(topic, payload, qos):
            """Handle new MQTT messages."""
@@ -82,6 +82,7 @@ class UnifiVideoCamera(Camera):
        self.is_streaming = False
        self._connect_addr = None
        self._camera = None
+        self._motion_status = False

    @property
    def name(self):
@@ -94,6 +95,12 @@ class UnifiVideoCamera(Camera):
        caminfo = self._nvr.get_camera(self._uuid)
        return caminfo['recordingSettings']['fullTimeRecordEnabled']

+    @property
+    def motion_detection_enabled(self):
+        """Camera Motion Detection Status."""
+        caminfo = self._nvr.get_camera(self._uuid)
+        return caminfo['recordingSettings']['motionRecordEnabled']
+
    @property
    def brand(self):
        """Return the brand of this camera."""
@@ -165,3 +172,26 @@ class UnifiVideoCamera(Camera):
                    raise

        return _get_image()
+
+    def set_motion_detection(self, mode):
+        """Set motion detection on or off."""
+        from uvcclient.nvr import NvrError
+        if mode is True:
+            set_mode = 'motion'
+        else:
+            set_mode = 'none'
+
+        try:
+            self._nvr.set_recordmode(self._uuid, set_mode)
+            self._motion_status = mode
+        except NvrError as err:
+            _LOGGER.error("Unable to set recordmode to " + set_mode)
+            _LOGGER.debug(err)
+
+    def enable_motion_detection(self):
+        """Enable motion detection in camera."""
+        self.set_motion_detection(True)
+
+    def disable_motion_detection(self):
+        """Disable motion detection in camera."""
+        self.set_motion_detection(False)
@@ -7,12 +7,10 @@ https://home-assistant.io/components/climate/
 import asyncio
 from datetime import timedelta
 import logging
-import os
 import functools as ft

 import voluptuous as vol

-from homeassistant.config import load_yaml_config_file
 from homeassistant.loader import bind_hass
 from homeassistant.helpers.temperature import display_temp as show_temp
 from homeassistant.util.temperature import convert as convert_temperature
@@ -21,9 +19,9 @@ from homeassistant.helpers.entity import Entity
 from homeassistant.helpers.config_validation import PLATFORM_SCHEMA  # noqa
 import homeassistant.helpers.config_validation as cv
 from homeassistant.const import (
-    ATTR_ENTITY_ID, ATTR_TEMPERATURE, STATE_ON, STATE_OFF, STATE_UNKNOWN,
-    TEMP_CELSIUS, PRECISION_WHOLE, PRECISION_TENTHS)
-
+    ATTR_ENTITY_ID, ATTR_TEMPERATURE, SERVICE_TURN_ON, SERVICE_TURN_OFF,
+    STATE_ON, STATE_OFF, STATE_UNKNOWN, TEMP_CELSIUS, PRECISION_WHOLE,
+    PRECISION_TENTHS, )
 DOMAIN = 'climate'

 ENTITY_ID_FORMAT = DOMAIN + '.{}'
@@ -63,6 +61,7 @@ SUPPORT_HOLD_MODE = 256
 SUPPORT_SWING_MODE = 512
 SUPPORT_AWAY_MODE = 1024
 SUPPORT_AUX_HEAT = 2048
+SUPPORT_ON_OFF = 4096

 ATTR_CURRENT_TEMPERATURE = 'current_temperature'
 ATTR_MAX_TEMP = 'max_temp'
@@ -92,6 +91,10 @@ CONVERTIBLE_ATTRIBUTE = [

 _LOGGER = logging.getLogger(__name__)

+ON_OFF_SERVICE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+})
+
 SET_AWAY_MODE_SCHEMA = vol.Schema({
    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
    vol.Required(ATTR_AWAY_MODE): cv.boolean,
@@ -240,10 +243,6 @@ def async_setup(hass, config):
    component = EntityComponent(_LOGGER, DOMAIN, hass, SCAN_INTERVAL)
    yield from component.async_setup(config)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file,
-        os.path.join(os.path.dirname(__file__), 'services.yaml'))
-
    @asyncio.coroutine
    def async_away_mode_set_service(service):
        """Set away mode on target climate devices."""
@@ -267,7 +266,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_AWAY_MODE, async_away_mode_set_service,
-        descriptions.get(SERVICE_SET_AWAY_MODE),
        schema=SET_AWAY_MODE_SCHEMA)

    @asyncio.coroutine
@@ -290,7 +288,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_HOLD_MODE, async_hold_mode_set_service,
-        descriptions.get(SERVICE_SET_HOLD_MODE),
        schema=SET_HOLD_MODE_SCHEMA)

    @asyncio.coroutine
@@ -316,7 +313,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_AUX_HEAT, async_aux_heat_set_service,
-        descriptions.get(SERVICE_SET_AUX_HEAT),
        schema=SET_AUX_HEAT_SCHEMA)

    @asyncio.coroutine
@@ -348,7 +344,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_TEMPERATURE, async_temperature_set_service,
-        descriptions.get(SERVICE_SET_TEMPERATURE),
        schema=SET_TEMPERATURE_SCHEMA)

    @asyncio.coroutine
@@ -370,7 +365,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_HUMIDITY, async_humidity_set_service,
-        descriptions.get(SERVICE_SET_HUMIDITY),
        schema=SET_HUMIDITY_SCHEMA)

    @asyncio.coroutine
@@ -392,7 +386,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_FAN_MODE, async_fan_mode_set_service,
-        descriptions.get(SERVICE_SET_FAN_MODE),
        schema=SET_FAN_MODE_SCHEMA)

    @asyncio.coroutine
@@ -414,7 +407,6 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_OPERATION_MODE, async_operation_set_service,
-        descriptions.get(SERVICE_SET_OPERATION_MODE),
        schema=SET_OPERATION_MODE_SCHEMA)

    @asyncio.coroutine
@@ -436,9 +428,34 @@ def async_setup(hass, config):

    hass.services.async_register(
        DOMAIN, SERVICE_SET_SWING_MODE, async_swing_set_service,
-        descriptions.get(SERVICE_SET_SWING_MODE),
        schema=SET_SWING_MODE_SCHEMA)

+    @asyncio.coroutine
+    def async_on_off_service(service):
+        """Handle on/off calls."""
+        target_climate = component.async_extract_from_service(service)
+
+        update_tasks = []
+        for climate in target_climate:
+            if service.service == SERVICE_TURN_ON:
+                yield from climate.async_turn_on()
+            elif service.service == SERVICE_TURN_OFF:
+                yield from climate.async_turn_off()
+
+            if not climate.should_poll:
+                continue
+            update_tasks.append(climate.async_update_ha_state(True))
+
+        if update_tasks:
+            yield from asyncio.wait(update_tasks, loop=hass.loop)
+
+    hass.services.async_register(
+        DOMAIN, SERVICE_TURN_OFF, async_on_off_service,
+        schema=ON_OFF_SERVICE_SCHEMA)
+    hass.services.async_register(
+        DOMAIN, SERVICE_TURN_ON, async_on_off_service,
+        schema=ON_OFF_SERVICE_SCHEMA)
+
    return True


@@ -449,8 +466,12 @@ class ClimateDevice(Entity):
    @property
    def state(self):
        """Return the current state."""
+        if self.is_on is False:
+            return STATE_OFF
        if self.current_operation:
            return self.current_operation
+        if self.is_on:
+            return STATE_ON
        return STATE_UNKNOWN

    @property
@@ -594,6 +615,11 @@ class ClimateDevice(Entity):
        """Return the current hold mode, e.g., home, away, temp."""
        return None

+    @property
+    def is_on(self):
+        """Return true if on."""
+        return None
+
    @property
    def is_aux_heat_on(self):
        """Return true if aux heater."""
@@ -730,6 +756,28 @@ class ClimateDevice(Entity):
        """
        return self.hass.async_add_job(self.turn_aux_heat_off)

+    def turn_on(self):
+        """Turn device on."""
+        raise NotImplementedError()
+
+    def async_turn_on(self):
+        """Turn device on.
+
+        This method must be run in the event loop and returns a coroutine.
+        """
+        return self.hass.async_add_job(self.turn_on)
+
+    def turn_off(self):
+        """Turn device off."""
+        raise NotImplementedError()
+
+    def async_turn_off(self):
+        """Turn device off.
+
+        This method must be run in the event loop and returns a coroutine.
+        """
+        return self.hass.async_add_job(self.turn_off)
+
    @property
    def supported_features(self):
        """Return the list of supported features."""
@@ -0,0 +1,257 @@
+"""
+Support for the Daikin HVAC.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.daikin/
+"""
+import logging
+import re
+
+import voluptuous as vol
+
+import homeassistant.helpers.config_validation as cv
+from homeassistant.components.climate import (
+    ATTR_OPERATION_MODE, ATTR_FAN_MODE, ATTR_SWING_MODE,
+    ATTR_CURRENT_TEMPERATURE, ClimateDevice, PLATFORM_SCHEMA,
+    SUPPORT_TARGET_TEMPERATURE, SUPPORT_FAN_MODE, SUPPORT_OPERATION_MODE,
+    SUPPORT_SWING_MODE, STATE_OFF, STATE_AUTO, STATE_HEAT, STATE_COOL,
+    STATE_DRY, STATE_FAN_ONLY
+)
+from homeassistant.components.daikin import (
+    daikin_api_setup,
+    ATTR_TARGET_TEMPERATURE,
+    ATTR_INSIDE_TEMPERATURE,
+    ATTR_OUTSIDE_TEMPERATURE
+)
+from homeassistant.const import (
+    CONF_HOST, CONF_NAME,
+    TEMP_CELSIUS,
+    ATTR_TEMPERATURE
+)
+
+REQUIREMENTS = ['pydaikin==0.4']
+
+_LOGGER = logging.getLogger(__name__)
+
+SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE |
+                 SUPPORT_FAN_MODE |
+                 SUPPORT_OPERATION_MODE |
+                 SUPPORT_SWING_MODE)
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_HOST): cv.string,
+    vol.Optional(CONF_NAME, default=None): cv.string,
+})
+
+HA_STATE_TO_DAIKIN = {
+    STATE_FAN_ONLY: 'fan',
+    STATE_DRY: 'dry',
+    STATE_COOL: 'cool',
+    STATE_HEAT: 'hot',
+    STATE_AUTO: 'auto',
+    STATE_OFF: 'off',
+}
+
+HA_ATTR_TO_DAIKIN = {
+    ATTR_OPERATION_MODE: 'mode',
+    ATTR_FAN_MODE: 'f_rate',
+    ATTR_SWING_MODE: 'f_dir',
+}
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Setup the Daikin HVAC platform."""
+    if discovery_info is not None:
+        host = discovery_info.get('ip')
+        name = None
+        _LOGGER.info("Discovered a Daikin AC on %s", host)
+    else:
+        host = config.get(CONF_HOST)
+        name = config.get(CONF_NAME)
+        _LOGGER.info("Added Daikin AC on %s", host)
+
+    api = daikin_api_setup(hass, host, name)
+    add_devices([DaikinClimate(api)], True)
+
+
+class DaikinClimate(ClimateDevice):
+    """Representation of a Daikin HVAC."""
+
+    def __init__(self, api):
+        """Initialize the climate device."""
+        from pydaikin import appliance
+
+        self._api = api
+        self._force_refresh = False
+        self._list = {
+            ATTR_OPERATION_MODE: list(
+                map(str.title, set(HA_STATE_TO_DAIKIN.values()))
+            ),
+            ATTR_FAN_MODE: list(
+                map(
+                    str.title,
+                    appliance.daikin_values(HA_ATTR_TO_DAIKIN[ATTR_FAN_MODE])
+                )
+            ),
+            ATTR_SWING_MODE: list(
+                map(
+                    str.title,
+                    appliance.daikin_values(HA_ATTR_TO_DAIKIN[ATTR_SWING_MODE])
+                )
+            ),
+        }
+
+    def get(self, key):
+        """Retrieve device settings from API library cache."""
+        value = None
+        cast_to_float = False
+
+        if key in [ATTR_TEMPERATURE, ATTR_INSIDE_TEMPERATURE,
+                   ATTR_CURRENT_TEMPERATURE]:
+            value = self._api.device.values.get('htemp')
+            cast_to_float = True
+        if key == ATTR_TARGET_TEMPERATURE:
+            value = self._api.device.values.get('stemp')
+            cast_to_float = True
+        elif key == ATTR_OUTSIDE_TEMPERATURE:
+            value = self._api.device.values.get('otemp')
+            cast_to_float = True
+        elif key == ATTR_FAN_MODE:
+            value = self._api.device.represent('f_rate')[1].title()
+        elif key == ATTR_SWING_MODE:
+            value = self._api.device.represent('f_dir')[1].title()
+        elif key == ATTR_OPERATION_MODE:
+            # Daikin can return also internal states auto-1 or auto-7
+            # and we need to translate them as AUTO
+            value = re.sub(
+                '[^a-z]',
+                '',
+                self._api.device.represent('mode')[1]
+            ).title()
+
+        if value is None:
+            _LOGGER.warning("Invalid value requested for key %s", key)
+        else:
+            if value == "-" or value == "--":
+                value = None
+            elif cast_to_float:
+                try:
+                    value = float(value)
+                except ValueError:
+                    value = None
+
+        return value
+
+    def set(self, settings):
+        """Set device settings using API."""
+        values = {}
+
+        for attr in [ATTR_TEMPERATURE, ATTR_FAN_MODE, ATTR_SWING_MODE,
+                     ATTR_OPERATION_MODE]:
+            value = settings.get(attr)
+            if value is None:
+                continue
+
+            daikin_attr = HA_ATTR_TO_DAIKIN.get(attr)
+            if daikin_attr is not None:
+                if value.title() in self._list[attr]:
+                    values[daikin_attr] = value.lower()
+                else:
+                    _LOGGER.error("Invalid value %s for %s", attr, value)
+
+            # temperature
+            elif attr == ATTR_TEMPERATURE:
+                try:
+                    values['stemp'] = str(int(value))
+                except ValueError:
+                    _LOGGER.error("Invalid temperature %s", value)
+
+        if values:
+            self._force_refresh = True
+            self._api.device.set(values)
+
+    @property
+    def unique_id(self):
+        """Return the ID of this AC."""
+        return "{}.{}".format(self.__class__, self._api.ip_address)
+
+    @property
+    def supported_features(self):
+        """Return the list of supported features."""
+        return SUPPORT_FLAGS
+
+    @property
+    def name(self):
+        """Return the name of the thermostat, if any."""
+        return self._api.name
+
+    @property
+    def temperature_unit(self):
+        """Return the unit of measurement which this thermostat uses."""
+        return TEMP_CELSIUS
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return self.get(ATTR_CURRENT_TEMPERATURE)
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self.get(ATTR_TARGET_TEMPERATURE)
+
+    @property
+    def target_temperature_step(self):
+        """Return the supported step of target temperature."""
+        return 1
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        self.set(kwargs)
+
+    @property
+    def current_operation(self):
+        """Return current operation ie. heat, cool, idle."""
+        return self.get(ATTR_OPERATION_MODE)
+
+    @property
+    def operation_list(self):
+        """Return the list of available operation modes."""
+        return self._list.get(ATTR_OPERATION_MODE)
+
+    def set_operation_mode(self, operation_mode):
+        """Set HVAC mode."""
+        self.set({ATTR_OPERATION_MODE: operation_mode})
+
+    @property
+    def current_fan_mode(self):
+        """Return the fan setting."""
+        return self.get(ATTR_FAN_MODE)
+
+    def set_fan_mode(self, fan):
+        """Set fan mode."""
+        self.set({ATTR_FAN_MODE: fan})
+
+    @property
+    def fan_list(self):
+        """List of available fan modes."""
+        return self._list.get(ATTR_FAN_MODE)
+
+    @property
+    def current_swing_mode(self):
+        """Return the fan setting."""
+        return self.get(ATTR_SWING_MODE)
+
+    def set_swing_mode(self, swing_mode):
+        """Set new target temperature."""
+        self.set({ATTR_SWING_MODE: swing_mode})
+
+    @property
+    def swing_list(self):
+        """List of available swing modes."""
+        return self._list.get(ATTR_SWING_MODE)
+
+    def update(self):
+        """Retrieve latest state."""
+        self._api.update(no_throttle=self._force_refresh)
+        self._force_refresh = False
@@ -9,14 +9,15 @@ from homeassistant.components.climate import (
    SUPPORT_TARGET_TEMPERATURE, SUPPORT_TARGET_HUMIDITY,
    SUPPORT_AWAY_MODE, SUPPORT_HOLD_MODE, SUPPORT_FAN_MODE,
    SUPPORT_OPERATION_MODE, SUPPORT_AUX_HEAT, SUPPORT_SWING_MODE,
-    SUPPORT_TARGET_TEMPERATURE_HIGH, SUPPORT_TARGET_TEMPERATURE_LOW)
+    SUPPORT_TARGET_TEMPERATURE_HIGH, SUPPORT_TARGET_TEMPERATURE_LOW,
+    SUPPORT_ON_OFF)
 from homeassistant.const import TEMP_CELSIUS, TEMP_FAHRENHEIT, ATTR_TEMPERATURE

 SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE | SUPPORT_TARGET_HUMIDITY |
                 SUPPORT_AWAY_MODE | SUPPORT_HOLD_MODE | SUPPORT_FAN_MODE |
                 SUPPORT_OPERATION_MODE | SUPPORT_AUX_HEAT |
                 SUPPORT_SWING_MODE | SUPPORT_TARGET_TEMPERATURE_HIGH |
-                 SUPPORT_TARGET_TEMPERATURE_LOW)
+                 SUPPORT_TARGET_TEMPERATURE_LOW | SUPPORT_ON_OFF)


 def setup_platform(hass, config, add_devices, discovery_info=None):
@@ -56,6 +57,7 @@ class DemoClimate(ClimateDevice):
        self._swing_list = ['Auto', '1', '2', '3', 'Off']
        self._target_temperature_high = target_temp_high
        self._target_temperature_low = target_temp_low
+        self._on = True

    @property
    def supported_features(self):
@@ -132,6 +134,11 @@ class DemoClimate(ClimateDevice):
        """Return true if aux heat is on."""
        return self._aux

+    @property
+    def is_on(self):
+        """Return true if the device is on."""
+        return self._on
+
    @property
    def current_fan_mode(self):
        """Return the fan setting."""
@@ -206,3 +213,13 @@ class DemoClimate(ClimateDevice):
        """Turn auxiliary heater off."""
        self._aux = False
        self.schedule_update_ha_state()
+
+    def turn_on(self):
+        """Turn on."""
+        self._on = True
+        self.schedule_update_ha_state()
+
+    def turn_off(self):
+        """Turn off."""
+        self._on = False
+        self.schedule_update_ha_state()
@@ -5,7 +5,6 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/climate.ecobee/
 """
 import logging
-from os import path

 import voluptuous as vol

@@ -17,7 +16,6 @@ from homeassistant.components.climate import (
    SUPPORT_TARGET_HUMIDITY_LOW, SUPPORT_TARGET_HUMIDITY_HIGH)
 from homeassistant.const import (
    ATTR_ENTITY_ID, STATE_OFF, STATE_ON, ATTR_TEMPERATURE, TEMP_FAHRENHEIT)
-from homeassistant.config import load_yaml_config_file
 import homeassistant.helpers.config_validation as cv

 _CONFIGURING = {}
@@ -96,17 +94,12 @@ def setup_platform(hass, config, add_devices, discovery_info=None):

            thermostat.schedule_update_ha_state(True)

-    descriptions = load_yaml_config_file(
-        path.join(path.dirname(__file__), 'services.yaml'))
-
    hass.services.register(
        DOMAIN, SERVICE_SET_FAN_MIN_ON_TIME, fan_min_on_time_set_service,
-        descriptions.get(SERVICE_SET_FAN_MIN_ON_TIME),
        schema=SET_FAN_MIN_ON_TIME_SCHEMA)

    hass.services.register(
        DOMAIN, SERVICE_RESUME_PROGRAM, resume_program_set_service,
-        descriptions.get(SERVICE_RESUME_PROGRAM),
        schema=RESUME_PROGRAM_SCHEMA)


@@ -0,0 +1,228 @@
+"""
+Support for Rheem EcoNet water heaters.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.econet/
+"""
+import datetime
+import logging
+
+import voluptuous as vol
+
+from homeassistant.components.climate import (
+    DOMAIN,
+    PLATFORM_SCHEMA,
+    STATE_ECO, STATE_GAS, STATE_ELECTRIC,
+    STATE_HEAT_PUMP, STATE_HIGH_DEMAND,
+    STATE_OFF, SUPPORT_TARGET_TEMPERATURE,
+    SUPPORT_OPERATION_MODE,
+    ClimateDevice)
+from homeassistant.const import (ATTR_ENTITY_ID,
+                                 CONF_PASSWORD, CONF_USERNAME, TEMP_FAHRENHEIT,
+                                 ATTR_TEMPERATURE)
+import homeassistant.helpers.config_validation as cv
+
+REQUIREMENTS = ['pyeconet==0.0.4']
+
+_LOGGER = logging.getLogger(__name__)
+
+ATTR_VACATION_START = 'next_vacation_start_date'
+ATTR_VACATION_END = 'next_vacation_end_date'
+ATTR_ON_VACATION = 'on_vacation'
+ATTR_TODAYS_ENERGY_USAGE = 'todays_energy_usage'
+ATTR_IN_USE = 'in_use'
+
+ATTR_START_DATE = 'start_date'
+ATTR_END_DATE = 'end_date'
+
+SUPPORT_FLAGS_HEATER = (SUPPORT_TARGET_TEMPERATURE | SUPPORT_OPERATION_MODE)
+
+SERVICE_ADD_VACATION = 'econet_add_vacation'
+SERVICE_DELETE_VACATION = 'econet_delete_vacation'
+
+ADD_VACATION_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Optional(ATTR_START_DATE): cv.positive_int,
+    vol.Required(ATTR_END_DATE): cv.positive_int,
+})
+
+DELETE_VACATION_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+})
+
+ECONET_DATA = 'econet'
+
+HA_STATE_TO_ECONET = {
+    STATE_ECO: 'Energy Saver',
+    STATE_ELECTRIC: 'Electric',
+    STATE_HEAT_PUMP: 'Heat Pump',
+    STATE_GAS: 'gas',
+    STATE_HIGH_DEMAND: 'High Demand',
+    STATE_OFF: 'Off',
+}
+
+ECONET_STATE_TO_HA = {value: key for key, value in HA_STATE_TO_ECONET.items()}
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_USERNAME): cv.string,
+    vol.Required(CONF_PASSWORD): cv.string,
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Set up the EcoNet water heaters."""
+    from pyeconet.api import PyEcoNet
+
+    hass.data[ECONET_DATA] = {}
+    hass.data[ECONET_DATA]['water_heaters'] = []
+
+    username = config.get(CONF_USERNAME)
+    password = config.get(CONF_PASSWORD)
+
+    econet = PyEcoNet(username, password)
+    water_heaters = econet.get_water_heaters()
+    hass_water_heaters = [
+        EcoNetWaterHeater(water_heater) for water_heater in water_heaters]
+    add_devices(hass_water_heaters)
+    hass.data[ECONET_DATA]['water_heaters'].extend(hass_water_heaters)
+
+    def service_handle(service):
+        """Handler for services."""
+        entity_ids = service.data.get('entity_id')
+        all_heaters = hass.data[ECONET_DATA]['water_heaters']
+        _heaters = [
+            x for x in all_heaters
+            if not entity_ids or x.entity_id in entity_ids]
+
+        for _water_heater in _heaters:
+            if service.service == SERVICE_ADD_VACATION:
+                start = service.data.get(ATTR_START_DATE)
+                end = service.data.get(ATTR_END_DATE)
+                _water_heater.add_vacation(start, end)
+            if service.service == SERVICE_DELETE_VACATION:
+                for vacation in _water_heater.water_heater.vacations:
+                    vacation.delete()
+
+            _water_heater.schedule_update_ha_state(True)
+
+    hass.services.register(DOMAIN, SERVICE_ADD_VACATION,
+                           service_handle,
+                           schema=ADD_VACATION_SCHEMA)
+
+    hass.services.register(DOMAIN, SERVICE_DELETE_VACATION,
+                           service_handle,
+                           schema=DELETE_VACATION_SCHEMA)
+
+
+class EcoNetWaterHeater(ClimateDevice):
+    """Representation of an EcoNet water heater."""
+
+    def __init__(self, water_heater):
+        """Initialize the water heater."""
+        self.water_heater = water_heater
+
+    @property
+    def name(self):
+        """Return the device name."""
+        return self.water_heater.name
+
+    @property
+    def available(self):
+        """Return if the the device is online or not."""
+        return self.water_heater.is_connected
+
+    @property
+    def temperature_unit(self):
+        """Return the unit of measurement."""
+        return TEMP_FAHRENHEIT
+
+    @property
+    def device_state_attributes(self):
+        """Return the optional state attributes."""
+        data = {}
+        vacations = self.water_heater.get_vacations()
+        if vacations:
+            data[ATTR_VACATION_START] = vacations[0].start_date
+            data[ATTR_VACATION_END] = vacations[0].end_date
+        data[ATTR_ON_VACATION] = self.water_heater.is_on_vacation
+        todays_usage = self.water_heater.total_usage_for_today
+        if todays_usage:
+            data[ATTR_TODAYS_ENERGY_USAGE] = todays_usage
+        data[ATTR_IN_USE] = self.water_heater.in_use
+
+        return data
+
+    @property
+    def current_operation(self):
+        """
+        Return current operation as one of the following.
+
+        ["eco", "heat_pump",
+        "high_demand", "electric_only"]
+        """
+        current_op = ECONET_STATE_TO_HA.get(self.water_heater.mode)
+        return current_op
+
+    @property
+    def operation_list(self):
+        """List of available operation modes."""
+        op_list = []
+        modes = self.water_heater.supported_modes
+        for mode in modes:
+            ha_mode = ECONET_STATE_TO_HA.get(mode)
+            if ha_mode is not None:
+                op_list.append(ha_mode)
+            else:
+                error = "Invalid operation mode mapping. " + mode + \
+                    " doesn't map. Please report this."
+                _LOGGER.error(error)
+        return op_list
+
+    @property
+    def supported_features(self):
+        """Return the list of supported features."""
+        return SUPPORT_FLAGS_HEATER
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        target_temp = kwargs.get(ATTR_TEMPERATURE)
+        if target_temp is not None:
+            self.water_heater.set_target_set_point(target_temp)
+        else:
+            _LOGGER.error("A target temperature must be provided.")
+
+    def set_operation_mode(self, operation_mode):
+        """Set operation mode."""
+        op_mode_to_set = HA_STATE_TO_ECONET.get(operation_mode)
+        if op_mode_to_set is not None:
+            self.water_heater.set_mode(op_mode_to_set)
+        else:
+            _LOGGER.error("An operation mode must be provided.")
+
+    def add_vacation(self, start, end):
+        """Add a vacation to this water heater."""
+        if not start:
+            start = datetime.datetime.now()
+        else:
+            start = datetime.datetime.fromtimestamp(start)
+        end = datetime.datetime.fromtimestamp(end)
+        self.water_heater.set_vacation_mode(start, end)
+
+    def update(self):
+        """Get the latest date."""
+        self.water_heater.update_state()
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self.water_heater.set_point
+
+    @property
+    def min_temp(self):
+        """Return the minimum temperature."""
+        return self.water_heater.min_set_point
+
+    @property
+    def max_temp(self):
+        """Return the maximum temperature."""
+        return self.water_heater.max_set_point
@@ -12,9 +12,9 @@ import voluptuous as vol
 from homeassistant.core import callback
 from homeassistant.core import DOMAIN as HA_DOMAIN
 from homeassistant.components.climate import (
-    STATE_HEAT, STATE_COOL, STATE_IDLE, ClimateDevice, PLATFORM_SCHEMA,
-    STATE_AUTO, ATTR_OPERATION_MODE, SUPPORT_OPERATION_MODE,
-    SUPPORT_TARGET_TEMPERATURE)
+    STATE_HEAT, STATE_COOL, STATE_IDLE, STATE_AUTO, ClimateDevice,
+    ATTR_OPERATION_MODE, ATTR_AWAY_MODE, SUPPORT_OPERATION_MODE,
+    SUPPORT_AWAY_MODE, SUPPORT_TARGET_TEMPERATURE, PLATFORM_SCHEMA)
 from homeassistant.const import (
    ATTR_UNIT_OF_MEASUREMENT, STATE_ON, STATE_OFF, ATTR_TEMPERATURE,
    CONF_NAME, ATTR_ENTITY_ID, SERVICE_TURN_ON, SERVICE_TURN_OFF)
@@ -30,6 +30,7 @@ DEPENDENCIES = ['switch', 'sensor']

 DEFAULT_TOLERANCE = 0.3
 DEFAULT_NAME = 'Generic Thermostat'
+DEFAULT_AWAY_TEMP = 16

 CONF_HEATER = 'heater'
 CONF_SENSOR = 'target_sensor'
@@ -42,7 +43,9 @@ CONF_COLD_TOLERANCE = 'cold_tolerance'
 CONF_HOT_TOLERANCE = 'hot_tolerance'
 CONF_KEEP_ALIVE = 'keep_alive'
 CONF_INITIAL_OPERATION_MODE = 'initial_operation_mode'
-SUPPORT_FLAGS = SUPPORT_TARGET_TEMPERATURE | SUPPORT_OPERATION_MODE
+CONF_AWAY_TEMP = 'away_temp'
+SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE | SUPPORT_AWAY_MODE |
+                 SUPPORT_OPERATION_MODE)

 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_HEATER): cv.entity_id,
@@ -60,7 +63,9 @@ PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Optional(CONF_KEEP_ALIVE): vol.All(
        cv.time_period, cv.positive_timedelta),
    vol.Optional(CONF_INITIAL_OPERATION_MODE):
-        vol.In([STATE_AUTO, STATE_OFF])
+        vol.In([STATE_AUTO, STATE_OFF]),
+    vol.Optional(CONF_AWAY_TEMP,
+                 default=DEFAULT_AWAY_TEMP): vol.Coerce(float)
 })


@@ -79,11 +84,12 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    hot_tolerance = config.get(CONF_HOT_TOLERANCE)
    keep_alive = config.get(CONF_KEEP_ALIVE)
    initial_operation_mode = config.get(CONF_INITIAL_OPERATION_MODE)
+    away_temp = config.get(CONF_AWAY_TEMP)

    async_add_devices([GenericThermostat(
        hass, name, heater_entity_id, sensor_entity_id, min_temp, max_temp,
        target_temp, ac_mode, min_cycle_duration, cold_tolerance,
-        hot_tolerance, keep_alive, initial_operation_mode)])
+        hot_tolerance, keep_alive, initial_operation_mode, away_temp)])


 class GenericThermostat(ClimateDevice):
@@ -92,7 +98,7 @@ class GenericThermostat(ClimateDevice):
    def __init__(self, hass, name, heater_entity_id, sensor_entity_id,
                 min_temp, max_temp, target_temp, ac_mode, min_cycle_duration,
                 cold_tolerance, hot_tolerance, keep_alive,
-                 initial_operation_mode):
+                 initial_operation_mode, away_temp):
        """Initialize the thermostat."""
        self.hass = hass
        self._name = name
@@ -103,17 +109,26 @@ class GenericThermostat(ClimateDevice):
        self._hot_tolerance = hot_tolerance
        self._keep_alive = keep_alive
        self._initial_operation_mode = initial_operation_mode
+        self._saved_target_temp = target_temp if target_temp is not None \
+            else away_temp
+        if self.ac_mode:
+            self._current_operation = STATE_COOL
+            self._operation_list = [STATE_COOL, STATE_OFF]
+        else:
+            self._current_operation = STATE_HEAT
+            self._operation_list = [STATE_HEAT, STATE_OFF]
        if initial_operation_mode == STATE_OFF:
            self._enabled = False
        else:
            self._enabled = True
-
        self._active = False
        self._cur_temp = None
        self._min_temp = min_temp
        self._max_temp = max_temp
        self._target_temp = target_temp
        self._unit = hass.config.units.temperature_unit
+        self._away_temp = away_temp
+        self._is_away = False

        async_track_state_change(
            hass, sensor_entity_id, self._async_sensor_changed)
@@ -124,10 +139,6 @@ class GenericThermostat(ClimateDevice):
            async_track_time_interval(
                hass, self._async_keep_alive, self._keep_alive)

-        sensor_state = hass.states.get(sensor_entity_id)
-        if sensor_state:
-            self._async_update_temp(sensor_state)
-
    @asyncio.coroutine
    def async_added_to_hass(self):
        """Run when entity about to be added."""
@@ -137,14 +148,37 @@ class GenericThermostat(ClimateDevice):
        if old_state is not None:
            # If we have no initial temperature, restore
            if self._target_temp is None:
-                self._target_temp = float(
-                    old_state.attributes[ATTR_TEMPERATURE])
-
-            # If we have no initial operation mode, restore
+                # If we have a previously saved temperature
+                if old_state.attributes[ATTR_TEMPERATURE] is None:
+                    if self.ac_mode:
+                        self._target_temp = self.max_temp
+                    else:
+                        self._target_temp = self.min_temp
+                    _LOGGER.warning('Undefined target temperature, \
+                                    falling back to %s', self._target_temp)
+                else:
+                    self._target_temp = float(
+                        old_state.attributes[ATTR_TEMPERATURE])
+            self._is_away = True if str(
+                old_state.attributes[ATTR_AWAY_MODE]) == STATE_ON else False
+            if old_state.attributes[ATTR_OPERATION_MODE] == STATE_OFF:
+                self._current_operation = STATE_OFF
+                self._enabled = False
            if self._initial_operation_mode is None:
                if old_state.attributes[ATTR_OPERATION_MODE] == STATE_OFF:
                    self._enabled = False

+    @property
+    def state(self):
+        """Return the current state."""
+        if self._is_device_active:
+            return self.current_operation
+        else:
+            if self._enabled:
+                return STATE_IDLE
+            else:
+                return STATE_OFF
+
    @property
    def should_poll(self):
        """Return the polling state."""
@@ -167,15 +201,8 @@ class GenericThermostat(ClimateDevice):

    @property
    def current_operation(self):
-        """Return current operation ie. heat, cool, idle."""
-        if not self._enabled:
-            return STATE_OFF
-        if self.ac_mode:
-            cooling = self._active and self._is_device_active
-            return STATE_COOL if cooling else STATE_IDLE
-
-        heating = self._active and self._is_device_active
-        return STATE_HEAT if heating else STATE_IDLE
+        """Return current operation."""
+        return self._current_operation

    @property
    def target_temperature(self):
@@ -185,14 +212,20 @@ class GenericThermostat(ClimateDevice):
    @property
    def operation_list(self):
        """List of available operation modes."""
-        return [STATE_AUTO, STATE_OFF]
+        return self._operation_list

    def set_operation_mode(self, operation_mode):
        """Set operation mode."""
-        if operation_mode == STATE_AUTO:
+        if operation_mode == STATE_HEAT:
+            self._current_operation = STATE_HEAT
+            self._enabled = True
+            self._async_control_heating()
+        elif operation_mode == STATE_COOL:
+            self._current_operation = STATE_COOL
            self._enabled = True
            self._async_control_heating()
        elif operation_mode == STATE_OFF:
+            self._current_operation = STATE_OFF
            self._enabled = False
            if self._is_device_active:
                self._heater_turn_off()
@@ -252,7 +285,7 @@ class GenericThermostat(ClimateDevice):
    @callback
    def _async_keep_alive(self, time):
        """Call at constant intervals for keep-alive purposes."""
-        if self.current_operation in [STATE_COOL, STATE_HEAT]:
+        if self._is_device_active:
            self._heater_turn_on()
        else:
            self._heater_turn_off()
@@ -347,3 +380,23 @@ class GenericThermostat(ClimateDevice):
        data = {ATTR_ENTITY_ID: self.heater_entity_id}
        self.hass.async_add_job(
            self.hass.services.async_call(HA_DOMAIN, SERVICE_TURN_OFF, data))
+
+    @property
+    def is_away_mode_on(self):
+        """Return true if away mode is on."""
+        return self._is_away
+
+    def turn_away_mode_on(self):
+        """Turn away mode on by setting it on away hold indefinitely."""
+        self._is_away = True
+        self._saved_target_temp = self._target_temp
+        self._target_temp = self._away_temp
+        self._async_control_heating()
+        self.schedule_update_ha_state()
+
+    def turn_away_mode_off(self):
+        """Turn away off."""
+        self._is_away = False
+        self._target_temp = self._saved_target_temp
+        self._async_control_heating()
+        self.schedule_update_ha_state()
@@ -6,7 +6,7 @@ https://home-assistant.io/components/climate.hive/
 """
 from homeassistant.components.climate import (
    ClimateDevice, STATE_AUTO, STATE_HEAT, STATE_OFF, STATE_ON,
-    SUPPORT_TARGET_TEMPERATURE, SUPPORT_OPERATION_MODE)
+    SUPPORT_AUX_HEAT, SUPPORT_TARGET_TEMPERATURE, SUPPORT_OPERATION_MODE)
 from homeassistant.const import ATTR_TEMPERATURE, TEMP_CELSIUS
 from homeassistant.components.hive import DATA_HIVE

@@ -16,7 +16,9 @@ HIVE_TO_HASS_STATE = {'SCHEDULE': STATE_AUTO, 'MANUAL': STATE_HEAT,
 HASS_TO_HIVE_STATE = {STATE_AUTO: 'SCHEDULE', STATE_HEAT: 'MANUAL',
                      STATE_ON: 'ON', STATE_OFF: 'OFF'}

-SUPPORT_FLAGS = SUPPORT_TARGET_TEMPERATURE | SUPPORT_OPERATION_MODE
+SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE |
+                 SUPPORT_OPERATION_MODE |
+                 SUPPORT_AUX_HEAT)


 def setup_platform(hass, config, add_devices, discovery_info=None):
@@ -134,6 +136,43 @@ class HiveClimateEntity(ClimateDevice):
            for entity in self.session.entities:
                entity.handle_update(self.data_updatesource)

+    @property
+    def is_aux_heat_on(self):
+        """Return true if auxiliary heater is on."""
+        boost_status = None
+        if self.device_type == "Heating":
+            boost_status = self.session.heating.get_boost(self.node_id)
+        elif self.device_type == "HotWater":
+            boost_status = self.session.hotwater.get_boost(self.node_id)
+        return boost_status == "ON"
+
+    def turn_aux_heat_on(self):
+        """Turn auxiliary heater on."""
+        target_boost_time = 30
+        if self.device_type == "Heating":
+            curtemp = self.session.heating.current_temperature(self.node_id)
+            curtemp = round(curtemp * 2) / 2
+            target_boost_temperature = curtemp + 0.5
+            self.session.heating.turn_boost_on(self.node_id,
+                                               target_boost_time,
+                                               target_boost_temperature)
+        elif self.device_type == "HotWater":
+            self.session.hotwater.turn_boost_on(self.node_id,
+                                                target_boost_time)
+
+        for entity in self.session.entities:
+            entity.handle_update(self.data_updatesource)
+
+    def turn_aux_heat_off(self):
+        """Turn auxiliary heater off."""
+        if self.device_type == "Heating":
+            self.session.heating.turn_boost_off(self.node_id)
+        elif self.device_type == "HotWater":
+            self.session.hotwater.turn_boost_off(self.node_id)
+
+        for entity in self.session.entities:
+            entity.handle_update(self.data_updatesource)
+
    def update(self):
        """Update all Node data frome Hive."""
        self.session.core.update_data(self.node_id)
@@ -8,7 +8,8 @@ import logging
 from homeassistant.components.climate import (
    ClimateDevice, STATE_AUTO, SUPPORT_TARGET_TEMPERATURE,
    SUPPORT_OPERATION_MODE)
-from homeassistant.components.homematic import HMDevice, ATTR_DISCOVER_DEVICES
+from homeassistant.components.homematic import (
+    HMDevice, ATTR_DISCOVER_DEVICES, HM_ATTRIBUTE_SUPPORT)
 from homeassistant.const import TEMP_CELSIUS, STATE_UNKNOWN, ATTR_TEMPERATURE

 DEPENDENCIES = ['homematic']
@@ -39,6 +40,7 @@ HM_HUMI_MAP = [
 ]

 HM_CONTROL_MODE = 'CONTROL_MODE'
+HM_IP_CONTROL_MODE = 'SET_POINT_MODE'

 SUPPORT_FLAGS = SUPPORT_TARGET_TEMPERATURE | SUPPORT_OPERATION_MODE

@@ -75,11 +77,25 @@ class HMThermostat(HMDevice, ClimateDevice):
        if HM_CONTROL_MODE not in self._data:
            return None

-        # read state and search
-        for mode, state in HM_STATE_MAP.items():
-            code = getattr(self._hmdevice, mode, 0)
-            if self._data.get('CONTROL_MODE') == code:
-                return state
+        set_point_mode = self._data.get('SET_POINT_MODE', -1)
+        control_mode = self._data.get('CONTROL_MODE', -1)
+        boost_mode = self._data.get('BOOST_MODE', False)
+
+        # boost mode is active
+        if boost_mode:
+            return STATE_BOOST
+
+        # HM ip etrv 2 uses the set_point_mode to say if its
+        # auto or manual
+        elif not set_point_mode == -1:
+            code = set_point_mode
+        # Other devices use the control_mode
+        else:
+            code = control_mode
+
+        # get the name of the mode
+        name = HM_ATTRIBUTE_SUPPORT[HM_CONTROL_MODE][1][code]
+        return name.lower()

    @property
    def operation_list(self):
@@ -125,6 +141,7 @@ class HMThermostat(HMDevice, ClimateDevice):
            if state == operation_mode:
                code = getattr(self._hmdevice, mode, 0)
                self._hmdevice.MODE = code
+                return

    @property
    def min_temp(self):
@@ -141,7 +158,8 @@ class HMThermostat(HMDevice, ClimateDevice):
        self._state = next(iter(self._hmdevice.WRITENODE.keys()))
        self._data[self._state] = STATE_UNKNOWN

-        if HM_CONTROL_MODE in self._hmdevice.ATTRIBUTENODE:
+        if HM_CONTROL_MODE in self._hmdevice.ATTRIBUTENODE or \
+                HM_IP_CONTROL_MODE in self._hmdevice.ATTRIBUTENODE:
            self._data[HM_CONTROL_MODE] = STATE_UNKNOWN

        for node in self._hmdevice.SENSORNODE.keys():
@@ -159,6 +159,11 @@ class KNXClimate(ClimateDevice):
        """Return the name of the KNX device."""
        return self.device.name

+    @property
+    def available(self):
+        """Return True if entity is available."""
+        return self.hass.data[DATA_KNX].connected
+
    @property
    def should_poll(self):
        """No polling needed within KNX."""
@@ -20,8 +20,9 @@ from homeassistant.components.climate import (
    SUPPORT_AUX_HEAT)
 from homeassistant.const import (
    STATE_ON, STATE_OFF, ATTR_TEMPERATURE, CONF_NAME)
-from homeassistant.components.mqtt import (CONF_QOS, CONF_RETAIN,
-                                           MQTT_BASE_PLATFORM_SCHEMA)
+from homeassistant.components.mqtt import (
+    CONF_AVAILABILITY_TOPIC, CONF_QOS, CONF_RETAIN, CONF_PAYLOAD_AVAILABLE,
+    CONF_PAYLOAD_NOT_AVAILABLE, MQTT_BASE_PLATFORM_SCHEMA, MqttAvailability)
 import homeassistant.helpers.config_validation as cv
 from homeassistant.components.fan import (SPEED_LOW, SPEED_MEDIUM,
                                          SPEED_HIGH)
@@ -93,7 +94,7 @@ PLATFORM_SCHEMA = SCHEMA_BASE.extend({
    vol.Optional(CONF_SEND_IF_OFF, default=True): cv.boolean,
    vol.Optional(CONF_PAYLOAD_ON, default="ON"): cv.string,
    vol.Optional(CONF_PAYLOAD_OFF, default="OFF"): cv.string,
-})
+}).extend(mqtt.MQTT_AVAILABILITY_SCHEMA.schema)


@asyncio.coroutine
@@ -134,19 +135,25 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
            STATE_OFF, STATE_OFF, False,
            config.get(CONF_SEND_IF_OFF),
            config.get(CONF_PAYLOAD_ON),
-            config.get(CONF_PAYLOAD_OFF))
+            config.get(CONF_PAYLOAD_OFF),
+            config.get(CONF_AVAILABILITY_TOPIC),
+            config.get(CONF_PAYLOAD_AVAILABLE),
+            config.get(CONF_PAYLOAD_NOT_AVAILABLE))
    ])


-class MqttClimate(ClimateDevice):
+class MqttClimate(MqttAvailability, ClimateDevice):
    """Representation of a demo climate device."""

    def __init__(self, hass, name, topic, qos, retain, mode_list,
                 fan_mode_list, swing_mode_list, target_temperature, away,
                 hold, current_fan_mode, current_swing_mode,
                 current_operation, aux, send_if_off, payload_on,
-                 payload_off):
+                 payload_off, availability_topic, payload_available,
+                 payload_not_available):
        """Initialize the climate device."""
+        super().__init__(availability_topic, qos, payload_available,
+                         payload_not_available)
        self.hass = hass
        self._name = name
        self._topic = topic
@@ -169,8 +176,11 @@ class MqttClimate(ClimateDevice):
        self._payload_on = payload_on
        self._payload_off = payload_off

+    @asyncio.coroutine
    def async_added_to_hass(self):
        """Handle being added to home assistant."""
+        yield from super().async_added_to_hass()
+
        @callback
        def handle_current_temp_received(topic, payload, qos):
            """Handle current temperature coming via MQTT."""
@@ -79,11 +79,6 @@ class NetatmoThermostat(ClimateDevice):
        """Return the name of the sensor."""
        return self._name

-    @property
-    def state(self):
-        """Return the state of the device."""
-        return self._target_temperature
-
    @property
    def temperature_unit(self):
        """Return the unit of measurement."""
@@ -0,0 +1,227 @@
+"""
+Support for NuHeat thermostats.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/climate.nuheat/
+"""
+import logging
+from datetime import timedelta
+
+import voluptuous as vol
+
+from homeassistant.components.climate import (
+    ClimateDevice,
+    DOMAIN,
+    SUPPORT_HOLD_MODE,
+    SUPPORT_OPERATION_MODE,
+    SUPPORT_TARGET_TEMPERATURE,
+    STATE_AUTO,
+    STATE_HEAT,
+    STATE_IDLE)
+from homeassistant.components.nuheat import DOMAIN as NUHEAT_DOMAIN
+from homeassistant.const import (
+    ATTR_ENTITY_ID,
+    ATTR_TEMPERATURE,
+    TEMP_CELSIUS,
+    TEMP_FAHRENHEIT)
+import homeassistant.helpers.config_validation as cv
+from homeassistant.util import Throttle
+
+DEPENDENCIES = ["nuheat"]
+
+_LOGGER = logging.getLogger(__name__)
+
+ICON = "mdi:thermometer"
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(minutes=5)
+
+# Hold modes
+MODE_AUTO = STATE_AUTO  # Run device schedule
+MODE_HOLD_TEMPERATURE = "temperature"
+MODE_TEMPORARY_HOLD = "temporary_temperature"
+
+OPERATION_LIST = [STATE_HEAT, STATE_IDLE]
+
+SCHEDULE_HOLD = 3
+SCHEDULE_RUN = 1
+SCHEDULE_TEMPORARY_HOLD = 2
+
+SERVICE_RESUME_PROGRAM = "nuheat_resume_program"
+
+RESUME_PROGRAM_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids
+})
+
+SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE | SUPPORT_HOLD_MODE |
+                 SUPPORT_OPERATION_MODE)
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Set up the NuHeat thermostat(s)."""
+    if discovery_info is None:
+        return
+
+    temperature_unit = hass.config.units.temperature_unit
+    api, serial_numbers = hass.data[NUHEAT_DOMAIN]
+    thermostats = [
+        NuHeatThermostat(api, serial_number, temperature_unit)
+        for serial_number in serial_numbers
+    ]
+    add_devices(thermostats, True)
+
+    def resume_program_set_service(service):
+        """Resume the program on the target thermostats."""
+        entity_id = service.data.get(ATTR_ENTITY_ID)
+        if entity_id:
+            target_thermostats = [device for device in thermostats
+                                  if device.entity_id in entity_id]
+        else:
+            target_thermostats = thermostats
+
+        for thermostat in target_thermostats:
+            thermostat.resume_program()
+
+            thermostat.schedule_update_ha_state(True)
+
+    hass.services.register(
+        DOMAIN, SERVICE_RESUME_PROGRAM, resume_program_set_service,
+        schema=RESUME_PROGRAM_SCHEMA)
+
+
+class NuHeatThermostat(ClimateDevice):
+    """Representation of a NuHeat Thermostat."""
+
+    def __init__(self, api, serial_number, temperature_unit):
+        """Initialize the thermostat."""
+        self._thermostat = api.get_thermostat(serial_number)
+        self._temperature_unit = temperature_unit
+        self._force_update = False
+
+    @property
+    def name(self):
+        """Return the name of the thermostat."""
+        return self._thermostat.room
+
+    @property
+    def icon(self):
+        """Return the icon to use in the frontend."""
+        return ICON
+
+    @property
+    def supported_features(self):
+        """Return the list of supported features."""
+        return SUPPORT_FLAGS
+
+    @property
+    def temperature_unit(self):
+        """Return the unit of measurement."""
+        if self._temperature_unit == "C":
+            return TEMP_CELSIUS
+
+        return TEMP_FAHRENHEIT
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        if self._temperature_unit == "C":
+            return self._thermostat.celsius
+
+        return self._thermostat.fahrenheit
+
+    @property
+    def current_operation(self):
+        """Return current operation. ie. heat, idle."""
+        if self._thermostat.heating:
+            return STATE_HEAT
+
+        return STATE_IDLE
+
+    @property
+    def min_temp(self):
+        """Return the minimum supported temperature for the thermostat."""
+        if self._temperature_unit == "C":
+            return self._thermostat.min_celsius
+
+        return self._thermostat.min_fahrenheit
+
+    @property
+    def max_temp(self):
+        """Return the maximum supported temperature for the thermostat."""
+        if self._temperature_unit == "C":
+            return self._thermostat.max_celsius
+
+        return self._thermostat.max_fahrenheit
+
+    @property
+    def target_temperature(self):
+        """Return the currently programmed temperature."""
+        if self._temperature_unit == "C":
+            return self._thermostat.target_celsius
+
+        return self._thermostat.target_fahrenheit
+
+    @property
+    def current_hold_mode(self):
+        """Return current hold mode."""
+        schedule_mode = self._thermostat.schedule_mode
+        if schedule_mode == SCHEDULE_RUN:
+            return MODE_AUTO
+
+        if schedule_mode == SCHEDULE_HOLD:
+            return MODE_HOLD_TEMPERATURE
+
+        if schedule_mode == SCHEDULE_TEMPORARY_HOLD:
+            return MODE_TEMPORARY_HOLD
+
+        return MODE_AUTO
+
+    @property
+    def operation_list(self):
+        """Return list of possible operation modes."""
+        return OPERATION_LIST
+
+    def resume_program(self):
+        """Resume the thermostat's programmed schedule."""
+        self._thermostat.resume_schedule()
+        self._force_update = True
+
+    def set_hold_mode(self, hold_mode, **kwargs):
+        """Update the hold mode of the thermostat."""
+        if hold_mode == MODE_AUTO:
+            schedule_mode = SCHEDULE_RUN
+
+        if hold_mode == MODE_HOLD_TEMPERATURE:
+            schedule_mode = SCHEDULE_HOLD
+
+        if hold_mode == MODE_TEMPORARY_HOLD:
+            schedule_mode = SCHEDULE_TEMPORARY_HOLD
+
+        self._thermostat.schedule_mode = schedule_mode
+        self._force_update = True
+
+    def set_temperature(self, **kwargs):
+        """Set a new target temperature."""
+        temperature = kwargs.get(ATTR_TEMPERATURE)
+        if self._temperature_unit == "C":
+            self._thermostat.target_celsius = temperature
+        else:
+            self._thermostat.target_fahrenheit = temperature
+
+        _LOGGER.debug(
+            "Setting NuHeat thermostat temperature to %s %s",
+            temperature, self.temperature_unit)
+
+        self._force_update = True
+
+    def update(self):
+        """Get the latest state from the thermostat."""
+        if self._force_update:
+            self._throttled_update(no_throttle=True)
+            self._force_update = False
+        else:
+            self._throttled_update()
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def _throttled_update(self, **kwargs):
+        """Get the latest state from the thermostat with a throttle."""
+        self._thermostat.get_data()
@@ -13,37 +13,49 @@ import async_timeout
 import voluptuous as vol

 from homeassistant.const import (
-    ATTR_TEMPERATURE, CONF_API_KEY, CONF_ID, TEMP_CELSIUS, TEMP_FAHRENHEIT)
+    ATTR_ENTITY_ID, ATTR_STATE, ATTR_TEMPERATURE, CONF_API_KEY, CONF_ID,
+    STATE_ON, STATE_OFF, TEMP_CELSIUS, TEMP_FAHRENHEIT)
 from homeassistant.components.climate import (
-    ATTR_CURRENT_HUMIDITY, ClimateDevice, PLATFORM_SCHEMA,
+    ATTR_CURRENT_HUMIDITY, ClimateDevice, DOMAIN, PLATFORM_SCHEMA,
    SUPPORT_TARGET_TEMPERATURE, SUPPORT_OPERATION_MODE,
-    SUPPORT_FAN_MODE, SUPPORT_AWAY_MODE, SUPPORT_SWING_MODE,
-    SUPPORT_AUX_HEAT)
+    SUPPORT_FAN_MODE, SUPPORT_SWING_MODE,
+    SUPPORT_ON_OFF)
 from homeassistant.exceptions import PlatformNotReady
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.util.temperature import convert as convert_temperature

-REQUIREMENTS = ['pysensibo==1.0.1']
+REQUIREMENTS = ['pysensibo==1.0.2']

 _LOGGER = logging.getLogger(__name__)

 ALL = 'all'
 TIMEOUT = 10

+SERVICE_ASSUME_STATE = 'sensibo_assume_state'
+
 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_API_KEY): cv.string,
    vol.Optional(CONF_ID, default=ALL): vol.All(cv.ensure_list, [cv.string]),
 })

+ASSUME_STATE_SCHEMA = vol.Schema({
+    vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
+    vol.Required(ATTR_STATE): cv.string,
+})
+
 _FETCH_FIELDS = ','.join([
    'room{name}', 'measurements', 'remoteCapabilities',
    'acState', 'connectionStatus{isAlive}', 'temperatureUnit'])
 _INITIAL_FETCH_FIELDS = 'id,' + _FETCH_FIELDS

-SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE | SUPPORT_OPERATION_MODE |
-                 SUPPORT_FAN_MODE | SUPPORT_AWAY_MODE | SUPPORT_SWING_MODE |
-                 SUPPORT_AUX_HEAT)
+FIELD_TO_FLAG = {
+    'fanLevel':  SUPPORT_FAN_MODE,
+    'mode': SUPPORT_OPERATION_MODE,
+    'swing': SUPPORT_SWING_MODE,
+    'targetTemperature': SUPPORT_TARGET_TEMPERATURE,
+    'on': SUPPORT_ON_OFF,
+}


@asyncio.coroutine
@@ -68,6 +80,28 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    if devices:
        async_add_devices(devices)

+        @asyncio.coroutine
+        def async_assume_state(service):
+            """Set state according to external service call.."""
+            entity_ids = service.data.get(ATTR_ENTITY_ID)
+            if entity_ids:
+                target_climate = [device for device in devices
+                                  if device.entity_id in entity_ids]
+            else:
+                target_climate = devices
+
+            update_tasks = []
+            for climate in target_climate:
+                yield from climate.async_assume_state(
+                    service.data.get(ATTR_STATE))
+                update_tasks.append(climate.async_update_ha_state(True))
+
+            if update_tasks:
+                yield from asyncio.wait(update_tasks, loop=hass.loop)
+        hass.services.async_register(
+            DOMAIN, SERVICE_ASSUME_STATE, async_assume_state,
+            schema=ASSUME_STATE_SCHEMA)
+

 class SensiboClimate(ClimateDevice):
    """Representation of a Sensibo device."""
@@ -80,12 +114,13 @@ class SensiboClimate(ClimateDevice):
        """
        self._client = client
        self._id = data['id']
+        self._external_state = None
        self._do_update(data)

    @property
    def supported_features(self):
        """Return the list of supported features."""
-        return SUPPORT_FLAGS
+        return self._supported_features

    def _do_update(self, data):
        self._name = data['room']['name']
@@ -106,6 +141,15 @@ class SensiboClimate(ClimateDevice):
        else:
            self._temperature_unit = self.unit_of_measurement
            self._temperatures_list = []
+        self._supported_features = 0
+        for key in self._ac_states:
+            if key in FIELD_TO_FLAG:
+                self._supported_features |= FIELD_TO_FLAG[key]
+
+    @property
+    def state(self):
+        """Return the current state."""
+        return self._external_state or super().state

    @property
    def device_state_attributes(self):
@@ -188,7 +232,7 @@ class SensiboClimate(ClimateDevice):
        return self._name

    @property
-    def is_aux_heat_on(self):
+    def is_on(self):
        """Return true if AC is on."""
        return self._ac_states['on']

@@ -196,13 +240,13 @@ class SensiboClimate(ClimateDevice):
    def min_temp(self):
        """Return the minimum temperature."""
        return self._temperatures_list[0] \
-            if len(self._temperatures_list) else super.min_temp()
+            if len(self._temperatures_list) else super().min_temp()

    @property
    def max_temp(self):
        """Return the maximum temperature."""
        return self._temperatures_list[-1] \
-            if len(self._temperatures_list) else super.max_temp()
+            if len(self._temperatures_list) else super().max_temp()

    @asyncio.coroutine
    def async_set_temperature(self, **kwargs):
@@ -226,42 +270,62 @@ class SensiboClimate(ClimateDevice):

        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'targetTemperature', temperature)
+                self._id, 'targetTemperature', temperature, self._ac_states)

    @asyncio.coroutine
    def async_set_fan_mode(self, fan):
        """Set new target fan mode."""
        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'fanLevel', fan)
+                self._id, 'fanLevel', fan, self._ac_states)

    @asyncio.coroutine
    def async_set_operation_mode(self, operation_mode):
        """Set new target operation mode."""
        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'mode', operation_mode)
+                self._id, 'mode', operation_mode, self._ac_states)

    @asyncio.coroutine
    def async_set_swing_mode(self, swing_mode):
        """Set new target swing operation."""
        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'swing', swing_mode)
+                self._id, 'swing', swing_mode, self._ac_states)

    @asyncio.coroutine
-    def async_turn_aux_heat_on(self):
+    def async_on(self):
        """Turn Sensibo unit on."""
        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'on', True)
+                self._id, 'on', True, self._ac_states)

    @asyncio.coroutine
-    def async_turn_aux_heat_off(self):
+    def async_off(self):
        """Turn Sensibo unit on."""
        with async_timeout.timeout(TIMEOUT):
            yield from self._client.async_set_ac_state_property(
-                self._id, 'on', False)
+                self._id, 'on', False, self._ac_states)
+
+    @asyncio.coroutine
+    def async_assume_state(self, state):
+        """Set external state."""
+        change_needed = (state != STATE_OFF and not self.is_on) \
+            or (state == STATE_OFF and self.is_on)
+        if change_needed:
+            with async_timeout.timeout(TIMEOUT):
+                yield from self._client.async_set_ac_state_property(
+                    self._id,
+                    'on',
+                    state != STATE_OFF,  # value
+                    self._ac_states,
+                    True  # assumed_state
+                )
+
+        if state in [STATE_ON, STATE_OFF]:
+            self._external_state = None
+        else:
+            self._external_state = state

    @asyncio.coroutine
    def async_update(self):
@@ -80,7 +80,22 @@ set_swing_mode:
      example: 'climate.nest'
    swing_mode:
      description: New value of swing mode.
-      example: 1
+      example:
+
+turn_on:
+  description: Turn climate device on.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.kitchen'
+
+turn_off:
+  description: Turn climate device off.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.kitchen'
+
 ecobee_set_fan_min_on_time:
  description: Set the minimum fan on time.
  fields:
@@ -100,3 +115,40 @@ ecobee_resume_program:
    resume_all:
      description: Resume all events and return to the scheduled program. This default to false which removes only the top event.
      example: true
+
+nuheat_resume_program:
+  description: Resume the programmed schedule.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.kitchen'
+
+econet_add_vacation:
+  description: Add a vacation to your water heater.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.water_heater'
+    start_date:
+      description: The timestamp of when the vacation should start. (Optional, defaults to now)
+      example: 1513186320
+    end_date:
+      description: The timestamp of when the vacation should end.
+      example: 1513445520
+
+econet_delete_vacation:
+  description: Delete your existing vacation from your water heater.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.water_heater'
+
+sensibo_assume_state:
+  description: Set Sensibo device to external state.
+  fields:
+    entity_id:
+      description: Name(s) of entities to change.
+      example: 'climate.kitchen'
+    state:
+      description: State to set.
+      example: 'idle'
@@ -6,7 +6,7 @@ https://home-assistant.io/components/climate.tado/
 """
 import logging

-from homeassistant.const import TEMP_CELSIUS
+from homeassistant.const import (PRECISION_TENTHS, TEMP_CELSIUS)
 from homeassistant.components.climate import (
    ClimateDevice, SUPPORT_TARGET_TEMPERATURE, SUPPORT_OPERATION_MODE)
 from homeassistant.const import ATTR_TEMPERATURE
@@ -192,6 +192,11 @@ class TadoClimate(ClimateDevice):
        """Return true if away mode is on."""
        return self._is_away

+    @property
+    def target_temperature_step(self):
+        """Return the supported step of target temperature."""
+        return PRECISION_TENTHS
+
    @property
    def target_temperature(self):
        """Return the temperature we try to reach."""
@@ -0,0 +1,90 @@
+"""
+Platform for Roth Touchline heat pump controller.
+
+For more details about this platform, please refer to the documentation
+https://home-assistant.io/components/climate.touchline/
+"""
+import logging
+
+import voluptuous as vol
+
+from homeassistant.components.climate import (
+    ClimateDevice, PLATFORM_SCHEMA, SUPPORT_TARGET_TEMPERATURE)
+from homeassistant.const import CONF_HOST, TEMP_CELSIUS, ATTR_TEMPERATURE
+import homeassistant.helpers.config_validation as cv
+
+REQUIREMENTS = ['pytouchline==0.6']
+
+_LOGGER = logging.getLogger(__name__)
+
+SUPPORT_FLAGS = (SUPPORT_TARGET_TEMPERATURE)
+
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Required(CONF_HOST): cv.string,
+})
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """Set up the Touchline devices."""
+    from pytouchline import PyTouchline
+    host = config[CONF_HOST]
+    py_touchline = PyTouchline()
+    number_of_devices = int(py_touchline.get_number_of_devices(host))
+    devices = []
+    for device_id in range(0, number_of_devices):
+        devices.append(Touchline(PyTouchline(device_id)))
+    add_devices(devices, True)
+
+
+class Touchline(ClimateDevice):
+    """Representation of a Touchline device."""
+
+    def __init__(self, touchline_thermostat):
+        """Initialize the climate device."""
+        self.unit = touchline_thermostat
+        self._name = None
+        self._current_temperature = None
+        self._target_temperature = None
+
+    @property
+    def supported_features(self):
+        """Return the list of supported features."""
+        return SUPPORT_FLAGS
+
+    def update(self):
+        """Update unit attributes."""
+        self.unit.update()
+        self._name = self.unit.get_name()
+        self._current_temperature = self.unit.get_current_temperature()
+        self._target_temperature = self.unit.get_target_temperature()
+
+    @property
+    def should_poll(self):
+        """Return the polling state."""
+        return True
+
+    @property
+    def name(self):
+        """Return the name of the climate device."""
+        return self._name
+
+    @property
+    def temperature_unit(self):
+        """Return the unit of measurement."""
+        return TEMP_CELSIUS
+
+    @property
+    def current_temperature(self):
+        """Return the current temperature."""
+        return self._current_temperature
+
+    @property
+    def target_temperature(self):
+        """Return the temperature we try to reach."""
+        return self._target_temperature
+
+    def set_temperature(self, **kwargs):
+        """Set new target temperature."""
+        if kwargs.get(ATTR_TEMPERATURE) is not None:
+            self._target_temperature = kwargs.get(ATTR_TEMPERATURE)
+        self.unit.set_target_temperature(self._target_temperature)
@@ -5,13 +5,18 @@ import json
 import logging
 import os

+import aiohttp
+import async_timeout
 import voluptuous as vol

 from homeassistant.const import (
-    EVENT_HOMEASSISTANT_START, CONF_REGION, CONF_MODE)
+    EVENT_HOMEASSISTANT_START, CONF_REGION, CONF_MODE, CONF_NAME, CONF_TYPE)
 from homeassistant.helpers import entityfilter
+from homeassistant.helpers import config_validation as cv
+from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.util import dt as dt_util
-from homeassistant.components.alexa import smart_home
+from homeassistant.components.alexa import smart_home as alexa_sh
+from homeassistant.components.google_assistant import smart_home as ga_sh

 from . import http_api, iot
 from .const import CONFIG_DIR, DOMAIN, SERVERS
@@ -21,22 +26,46 @@ REQUIREMENTS = ['warrant==0.6.1']
 _LOGGER = logging.getLogger(__name__)

 CONF_ALEXA = 'alexa'
-CONF_ALEXA_FILTER = 'filter'
+CONF_GOOGLE_ACTIONS = 'google_actions'
+CONF_FILTER = 'filter'
 CONF_COGNITO_CLIENT_ID = 'cognito_client_id'
 CONF_RELAYER = 'relayer'
 CONF_USER_POOL_ID = 'user_pool_id'
+CONF_ALIASES = 'aliases'

 MODE_DEV = 'development'
 DEFAULT_MODE = 'production'
 DEPENDENCIES = ['http']

-ALEXA_SCHEMA = vol.Schema({
+CONF_ENTITY_CONFIG = 'entity_config'
+
+ALEXA_ENTITY_SCHEMA = vol.Schema({
+    vol.Optional(alexa_sh.CONF_DESCRIPTION): cv.string,
+    vol.Optional(alexa_sh.CONF_DISPLAY_CATEGORIES): cv.string,
+    vol.Optional(alexa_sh.CONF_NAME): cv.string,
+})
+
+GOOGLE_ENTITY_SCHEMA = vol.Schema({
+    vol.Optional(CONF_NAME): cv.string,
+    vol.Optional(CONF_TYPE): vol.In(ga_sh.MAPPING_COMPONENT),
+    vol.Optional(CONF_ALIASES): vol.All(cv.ensure_list, [cv.string])
+})
+
+ASSISTANT_SCHEMA = vol.Schema({
    vol.Optional(
-        CONF_ALEXA_FILTER,
+        CONF_FILTER,
        default=lambda: entityfilter.generate_filter([], [], [], [])
    ): entityfilter.FILTER_SCHEMA,
 })

+ALEXA_SCHEMA = ASSISTANT_SCHEMA.extend({
+    vol.Optional(CONF_ENTITY_CONFIG): {cv.entity_id: ALEXA_ENTITY_SCHEMA}
+})
+
+GACTIONS_SCHEMA = ASSISTANT_SCHEMA.extend({
+    vol.Optional(CONF_ENTITY_CONFIG): {cv.entity_id: GOOGLE_ENTITY_SCHEMA}
+})
+
 CONFIG_SCHEMA = vol.Schema({
    DOMAIN: vol.Schema({
        vol.Optional(CONF_MODE, default=DEFAULT_MODE):
@@ -46,7 +75,8 @@ CONFIG_SCHEMA = vol.Schema({
        vol.Optional(CONF_USER_POOL_ID): str,
        vol.Optional(CONF_REGION): str,
        vol.Optional(CONF_RELAYER): str,
-        vol.Optional(CONF_ALEXA): ALEXA_SCHEMA
+        vol.Optional(CONF_ALEXA): ALEXA_SCHEMA,
+        vol.Optional(CONF_GOOGLE_ACTIONS): GACTIONS_SCHEMA,
    }),
 }, extra=vol.ALLOW_EXTRA)

@@ -55,22 +85,26 @@ CONFIG_SCHEMA = vol.Schema({
 def async_setup(hass, config):
    """Initialize the Home Assistant cloud."""
    if DOMAIN in config:
-        kwargs = config[DOMAIN]
+        kwargs = dict(config[DOMAIN])
    else:
        kwargs = {CONF_MODE: DEFAULT_MODE}

-    if CONF_ALEXA not in kwargs:
-        kwargs[CONF_ALEXA] = ALEXA_SCHEMA({})
+    alexa_conf = kwargs.pop(CONF_ALEXA, None) or ALEXA_SCHEMA({})
+
+    if CONF_GOOGLE_ACTIONS not in kwargs:
+        kwargs[CONF_GOOGLE_ACTIONS] = GACTIONS_SCHEMA({})
+
+    kwargs[CONF_ALEXA] = alexa_sh.Config(
+        should_expose=alexa_conf[CONF_FILTER],
+        entity_config=alexa_conf.get(CONF_ENTITY_CONFIG),
+    )

-    kwargs[CONF_ALEXA] = smart_home.Config(**kwargs[CONF_ALEXA])
    cloud = hass.data[DOMAIN] = Cloud(hass, **kwargs)

-    @asyncio.coroutine
-    def init_cloud(event):
-        """Initialize connection."""
-        yield from cloud.initialize()
+    success = yield from cloud.initialize()

-    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_START, init_cloud)
+    if not success:
+        return False

    yield from http_api.async_setup(hass)
    return True
@@ -79,12 +113,16 @@ def async_setup(hass, config):
 class Cloud:
    """Store the configuration of the cloud connection."""

-    def __init__(self, hass, mode, cognito_client_id=None, user_pool_id=None,
-                 region=None, relayer=None, alexa=None):
+    def __init__(self, hass, mode, alexa, google_actions,
+                 cognito_client_id=None, user_pool_id=None, region=None,
+                 relayer=None):
        """Create an instance of Cloud."""
        self.hass = hass
        self.mode = mode
        self.alexa_config = alexa
+        self._google_actions = google_actions
+        self._gactions_config = None
+        self.jwt_keyset = None
        self.id_token = None
        self.access_token = None
        self.refresh_token = None
@@ -104,11 +142,6 @@ class Cloud:
            self.region = info['region']
            self.relayer = info['relayer']

-    @property
-    def cognito_email_based(self):
-        """Return if cognito is email based."""
-        return not self.user_pool_id.endswith('GmV')
-
    @property
    def is_logged_in(self):
        """Get if cloud is logged in."""
@@ -128,37 +161,44 @@ class Cloud:

    @property
    def claims(self):
-        """Get the claims from the id token."""
-        from jose import jwt
-        return jwt.get_unverified_claims(self.id_token)
+        """Return the claims from the id token."""
+        return self._decode_claims(self.id_token)

    @property
    def user_info_path(self):
        """Get path to the stored auth."""
        return self.path('{}_auth.json'.format(self.mode))

+    @property
+    def gactions_config(self):
+        """Return the Google Assistant config."""
+        if self._gactions_config is None:
+            conf = self._google_actions
+
+            def should_expose(entity):
+                """If an entity should be exposed."""
+                return conf['filter'](entity.entity_id)
+
+            self._gactions_config = ga_sh.Config(
+                should_expose=should_expose,
+                agent_user_id=self.claims['cognito:username'],
+                entity_config=conf.get(CONF_ENTITY_CONFIG),
+            )
+
+        return self._gactions_config
+
    @asyncio.coroutine
    def initialize(self):
        """Initialize and load cloud info."""
-        def load_config():
-            """Load the configuration."""
-            # Ensure config dir exists
-            path = self.hass.config.path(CONFIG_DIR)
-            if not os.path.isdir(path):
-                os.mkdir(path)
+        jwt_success = yield from self._fetch_jwt_keyset()

-            user_info = self.user_info_path
-            if os.path.isfile(user_info):
-                with open(user_info, 'rt') as file:
-                    info = json.loads(file.read())
-                self.id_token = info['id_token']
-                self.access_token = info['access_token']
-                self.refresh_token = info['refresh_token']
+        if not jwt_success:
+            return False

-        yield from self.hass.async_add_job(load_config)
+        self.hass.bus.async_listen_once(EVENT_HOMEASSISTANT_START,
+                                        self._start_cloud)

-        if self.id_token is not None:
-            yield from self.iot.connect()
+        return True

    def path(self, *parts):
        """Get config path inside cloud dir.
@@ -175,6 +215,7 @@ class Cloud:
        self.id_token = None
        self.access_token = None
        self.refresh_token = None
+        self._gactions_config = None

        yield from self.hass.async_add_job(
            lambda: os.remove(self.user_info_path))
@@ -187,3 +228,79 @@ class Cloud:
                'access_token': self.access_token,
                'refresh_token': self.refresh_token,
            }, indent=4))
+
+    def _start_cloud(self, event):
+        """Start the cloud component."""
+        # Ensure config dir exists
+        path = self.hass.config.path(CONFIG_DIR)
+        if not os.path.isdir(path):
+            os.mkdir(path)
+
+        user_info = self.user_info_path
+        if not os.path.isfile(user_info):
+            return
+
+        with open(user_info, 'rt') as file:
+            info = json.loads(file.read())
+
+        # Validate tokens
+        try:
+            for token in 'id_token', 'access_token':
+                self._decode_claims(info[token])
+        except ValueError as err:  # Raised when token is invalid
+            _LOGGER.warning('Found invalid token %s: %s', token, err)
+            return
+
+        self.id_token = info['id_token']
+        self.access_token = info['access_token']
+        self.refresh_token = info['refresh_token']
+
+        self.hass.add_job(self.iot.connect())
+
+    @asyncio.coroutine
+    def _fetch_jwt_keyset(self):
+        """Fetch the JWT keyset for the Cognito instance."""
+        session = async_get_clientsession(self.hass)
+        url = ("https://cognito-idp.us-east-1.amazonaws.com/"
+               "{}/.well-known/jwks.json".format(self.user_pool_id))
+
+        try:
+            with async_timeout.timeout(10, loop=self.hass.loop):
+                req = yield from session.get(url)
+                self.jwt_keyset = yield from req.json()
+
+            return True
+
+        except (asyncio.TimeoutError, aiohttp.ClientError) as err:
+            _LOGGER.error("Error fetching Cognito keyset: %s", err)
+            return False
+
+    def _decode_claims(self, token):
+        """Decode the claims in a token."""
+        from jose import jwt, exceptions as jose_exceptions
+        try:
+            header = jwt.get_unverified_header(token)
+        except jose_exceptions.JWTError as err:
+            raise ValueError(str(err)) from None
+        kid = header.get("kid")
+
+        if kid is None:
+            raise ValueError('No kid in header')
+
+        # Locate the key for this kid
+        key = None
+        for key_dict in self.jwt_keyset["keys"]:
+            if key_dict["kid"] == kid:
+                key = key_dict
+                break
+        if not key:
+            raise ValueError(
+                "Unable to locate kid ({}) in keyset".format(kid))
+
+        try:
+            return jwt.decode(
+                token, key, audience=self.cognito_client_id, options={
+                    'verify_exp': False,
+                })
+        except jose_exceptions.JWTError as err:
+            raise ValueError(str(err)) from None
@@ -1,5 +1,4 @@
 """Package to communicate with the authentication API."""
-import hashlib
 import logging


@@ -58,11 +57,6 @@ def _map_aws_exception(err):
    return ex(err.response['Error']['Message'])


-def _generate_username(email):
-    """Generate a username from an email address."""
-    return hashlib.sha512(email.encode('utf-8')).hexdigest()
-
-
 def register(cloud, email, password):
    """Register a new account."""
    from botocore.exceptions import ClientError
@@ -72,10 +66,7 @@ def register(cloud, email, password):
    # https://github.com/capless/warrant/pull/82
    cognito.add_base_attributes()
    try:
-        if cloud.cognito_email_based:
-            cognito.register(email, password)
-        else:
-            cognito.register(_generate_username(email), password)
+        cognito.register(email, password)
    except ClientError as err:
        raise _map_aws_exception(err)

@@ -86,11 +77,22 @@ def confirm_register(cloud, confirmation_code, email):

    cognito = _cognito(cloud)
    try:
-        if cloud.cognito_email_based:
-            cognito.confirm_sign_up(confirmation_code, email)
-        else:
-            cognito.confirm_sign_up(confirmation_code,
-                                    _generate_username(email))
+        cognito.confirm_sign_up(confirmation_code, email)
+    except ClientError as err:
+        raise _map_aws_exception(err)
+
+
+def resend_email_confirm(cloud, email):
+    """Resend email confirmation."""
+    from botocore.exceptions import ClientError
+
+    cognito = _cognito(cloud, username=email)
+
+    try:
+        cognito.client.resend_confirmation_code(
+            Username=email,
+            ClientId=cognito.client_id
+        )
    except ClientError as err:
        raise _map_aws_exception(err)

@@ -99,10 +101,7 @@ def forgot_password(cloud, email):
    """Initiate forgotten password flow."""
    from botocore.exceptions import ClientError

-    if cloud.cognito_email_based:
-        cognito = _cognito(cloud, username=email)
-    else:
-        cognito = _cognito(cloud, username=_generate_username(email))
+    cognito = _cognito(cloud, username=email)

    try:
        cognito.initiate_forgot_password()
@@ -114,10 +113,7 @@ def confirm_forgot_password(cloud, confirmation_code, email, new_password):
    """Confirm forgotten password code and change password."""
    from botocore.exceptions import ClientError

-    if cloud.cognito_email_based:
-        cognito = _cognito(cloud, username=email)
-    else:
-        cognito = _cognito(cloud, username=_generate_username(email))
+    cognito = _cognito(cloud, username=email)

    try:
        cognito.confirm_forgot_password(confirmation_code, new_password)
@@ -23,6 +23,7 @@ def async_setup(hass):
    hass.http.register_view(CloudAccountView)
    hass.http.register_view(CloudRegisterView)
    hass.http.register_view(CloudConfirmRegisterView)
+    hass.http.register_view(CloudResendConfirmView)
    hass.http.register_view(CloudForgotPasswordView)
    hass.http.register_view(CloudConfirmForgotPasswordView)

@@ -172,6 +173,29 @@ class CloudConfirmRegisterView(HomeAssistantView):
        return self.json_message('ok')


+class CloudResendConfirmView(HomeAssistantView):
+    """Resend email confirmation code."""
+
+    url = '/api/cloud/resend_confirm'
+    name = 'api:cloud:resend_confirm'
+
+    @_handle_cloud_errors
+    @RequestDataValidator(vol.Schema({
+        vol.Required('email'): str,
+    }))
+    @asyncio.coroutine
+    def post(self, request, data):
+        """Handle resending confirm email code request."""
+        hass = request.app['hass']
+        cloud = hass.data[DOMAIN]
+
+        with async_timeout.timeout(REQUEST_TIMEOUT, loop=hass.loop):
+            yield from hass.async_add_job(
+                auth_api.resend_email_confirm, cloud, data['email'])
+
+        return self.json_message('ok')
+
+
 class CloudForgotPasswordView(HomeAssistantView):
    """View to start Forgot Password flow.."""

@@ -228,6 +252,6 @@ def _account_data(cloud):

    return {
        'email': claims['email'],
-        'sub_exp': claims.get('custom:sub-exp'),
+        'sub_exp': claims['custom:sub-exp'],
        'cloud': cloud.iot.state,
    }
@@ -5,7 +5,8 @@ import logging
 from aiohttp import hdrs, client_exceptions, WSMsgType

 from homeassistant.const import EVENT_HOMEASSISTANT_STOP
-from homeassistant.components.alexa import smart_home
+from homeassistant.components.alexa import smart_home as alexa
+from homeassistant.components.google_assistant import smart_home as ga
 from homeassistant.util.decorator import Registry
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from . import auth_api
@@ -78,7 +79,7 @@ class CloudIoT:
            yield from hass.async_add_job(auth_api.check_token, self.cloud)

            self.client = client = yield from session.ws_connect(
-                self.cloud.relayer, headers={
+                self.cloud.relayer, heartbeat=55, headers={
                    hdrs.AUTHORIZATION:
                        'Bearer {}'.format(self.cloud.id_token)
                })
@@ -204,9 +205,18 @@ def async_handle_message(hass, cloud, handler_name, payload):
@asyncio.coroutine
 def async_handle_alexa(hass, cloud, payload):
    """Handle an incoming IoT message for Alexa."""
-    return (yield from smart_home.async_handle_message(hass,
-                                                       cloud.alexa_config,
-                                                       payload))
+    result = yield from alexa.async_handle_message(hass, cloud.alexa_config,
+                                                   payload)
+    return result
+
+
+@HANDLERS.register('google_actions')
+@asyncio.coroutine
+def async_handle_google_actions(hass, cloud, payload):
+    """Handle an incoming IoT message for Google Actions."""
+    result = yield from ga.async_handle_message(hass, cloud.gactions_config,
+                                                payload)
+    return result


@HANDLERS.register('cloud')
@@ -0,0 +1,90 @@
+"""
+Support for Coinbase.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/coinbase/
+"""
+from datetime import timedelta
+
+import logging
+import voluptuous as vol
+
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import CONF_API_KEY
+from homeassistant.util import Throttle
+from homeassistant.helpers.discovery import load_platform
+
+REQUIREMENTS = ['coinbase==2.0.6']
+_LOGGER = logging.getLogger(__name__)
+
+DOMAIN = 'coinbase'
+
+CONF_API_SECRET = 'api_secret'
+CONF_EXCHANGE_CURRENCIES = 'exchange_rate_currencies'
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(minutes=1)
+
+DATA_COINBASE = 'coinbase_cache'
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Required(CONF_API_KEY): cv.string,
+        vol.Required(CONF_API_SECRET): cv.string,
+        vol.Optional(CONF_EXCHANGE_CURRENCIES, default=[]):
+            vol.All(cv.ensure_list, [cv.string])
+    })
+}, extra=vol.ALLOW_EXTRA)
+
+
+def setup(hass, config):
+    """Set up the Coinbase component.
+
+    Will automatically setup sensors to support
+    wallets discovered on the network.
+    """
+    api_key = config[DOMAIN].get(CONF_API_KEY)
+    api_secret = config[DOMAIN].get(CONF_API_SECRET)
+    exchange_currencies = config[DOMAIN].get(CONF_EXCHANGE_CURRENCIES)
+
+    hass.data[DATA_COINBASE] = coinbase_data = CoinbaseData(api_key,
+                                                            api_secret)
+
+    if not hasattr(coinbase_data, 'accounts'):
+        return False
+    for account in coinbase_data.accounts.data:
+        load_platform(hass, 'sensor', DOMAIN,
+                      {'account': account}, config)
+    for currency in exchange_currencies:
+        if currency not in coinbase_data.exchange_rates.rates:
+            _LOGGER.warning("Currency %s not found", currency)
+            continue
+        native = coinbase_data.exchange_rates.currency
+        load_platform(hass,
+                      'sensor',
+                      DOMAIN,
+                      {'native_currency': native,
+                       'exchange_currency': currency},
+                      config)
+
+    return True
+
+
+class CoinbaseData(object):
+    """Get the latest data and update the states."""
+
+    def __init__(self, api_key, api_secret):
+        """Init the coinbase data object."""
+        from coinbase.wallet.client import Client
+        self.client = Client(api_key, api_secret)
+        self.update()
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def update(self):
+        """Get the latest data from coinbase."""
+        from coinbase.wallet.error import AuthenticationError
+        try:
+            self.accounts = self.client.get_accounts()
+            self.exchange_rates = self.client.get_exchange_rates()
+        except AuthenticationError as coinbase_error:
+            _LOGGER.error("Authentication error connecting"
+                          " to coinbase: %s", coinbase_error)
@@ -12,20 +12,27 @@ import warnings
 import voluptuous as vol

 from homeassistant import core
-from homeassistant.loader import bind_hass
+from homeassistant.components import http
 from homeassistant.const import (
    ATTR_ENTITY_ID, SERVICE_TURN_OFF, SERVICE_TURN_ON)
-from homeassistant.helpers import intent, config_validation as cv
-from homeassistant.components import http
+from homeassistant.helpers import config_validation as cv
+from homeassistant.helpers import intent
+from homeassistant.loader import bind_hass

+REQUIREMENTS = ['fuzzywuzzy==0.16.0']

-REQUIREMENTS = ['fuzzywuzzy==0.15.1']
-DEPENDENCIES = ['http']
+_LOGGER = logging.getLogger(__name__)

 ATTR_TEXT = 'text'
+
+DEPENDENCIES = ['http']
 DOMAIN = 'conversation'

+INTENT_TURN_OFF = 'HassTurnOff'
+INTENT_TURN_ON = 'HassTurnOn'
+
 REGEX_TURN_COMMAND = re.compile(r'turn (?P<name>(?: |\w)+) (?P<command>\w+)')
+REGEX_TYPE = type(re.compile(''))

 SERVICE_PROCESS = 'process'

@@ -39,12 +46,6 @@ CONFIG_SCHEMA = vol.Schema({DOMAIN: vol.Schema({
    })
 })}, extra=vol.ALLOW_EXTRA)

-INTENT_TURN_ON = 'HassTurnOn'
-INTENT_TURN_OFF = 'HassTurnOff'
-REGEX_TYPE = type(re.compile(''))
-
-_LOGGER = logging.getLogger(__name__)
-

@core.callback
@bind_hass
@@ -6,12 +6,10 @@ at https://home-assistant.io/components/counter/
 """
 import asyncio
 import logging
-import os

 import voluptuous as vol

 import homeassistant.helpers.config_validation as cv
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (ATTR_ENTITY_ID, CONF_ICON, CONF_NAME)
 from homeassistant.core import callback
 from homeassistant.helpers.entity import Entity
@@ -133,20 +131,12 @@ def async_setup(hass, config):
        if tasks:
            yield from asyncio.wait(tasks, loop=hass.loop)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml')
-    )
-
    hass.services.async_register(
-        DOMAIN, SERVICE_INCREMENT, async_handler_service,
-        descriptions[SERVICE_INCREMENT], SERVICE_SCHEMA)
+        DOMAIN, SERVICE_INCREMENT, async_handler_service)
    hass.services.async_register(
-        DOMAIN, SERVICE_DECREMENT, async_handler_service,
-        descriptions[SERVICE_DECREMENT], SERVICE_SCHEMA)
+        DOMAIN, SERVICE_DECREMENT, async_handler_service)
    hass.services.async_register(
-        DOMAIN, SERVICE_RESET, async_handler_service,
-        descriptions[SERVICE_RESET], SERVICE_SCHEMA)
+        DOMAIN, SERVICE_RESET, async_handler_service)

    yield from component.async_add_entities(entities)
    return True
@@ -8,11 +8,9 @@ import asyncio
 from datetime import timedelta
 import functools as ft
 import logging
-import os

 import voluptuous as vol

-from homeassistant.config import load_yaml_config_file
 from homeassistant.loader import bind_hass
 from homeassistant.helpers.entity_component import EntityComponent
 from homeassistant.helpers.entity import Entity
@@ -179,16 +177,12 @@ def async_setup(hass, config):
        if update_tasks:
            yield from asyncio.wait(update_tasks, loop=hass.loop)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    for service_name in SERVICE_TO_METHOD:
        schema = SERVICE_TO_METHOD[service_name].get(
            'schema', COVER_SERVICE_SCHEMA)
        hass.services.async_register(
            DOMAIN, service_name, async_handle_cover_service,
-            descriptions.get(service_name), schema=schema)
+            schema=schema)

    return True

@@ -8,8 +8,10 @@ import logging
 from typing import Callable  # noqa

 from homeassistant.components.cover import CoverDevice, DOMAIN
-import homeassistant.components.isy994 as isy
-from homeassistant.const import STATE_OPEN, STATE_CLOSED, STATE_UNKNOWN
+from homeassistant.components.isy994 import (ISY994_NODES, ISY994_PROGRAMS,
+                                             ISYDevice)
+from homeassistant.const import (
+    STATE_OPEN, STATE_CLOSED, STATE_OPENING, STATE_CLOSING, STATE_UNKNOWN)
 from homeassistant.helpers.typing import ConfigType

 _LOGGER = logging.getLogger(__name__)
@@ -17,44 +19,32 @@ _LOGGER = logging.getLogger(__name__)
 VALUE_TO_STATE = {
    0: STATE_CLOSED,
    101: STATE_UNKNOWN,
+    102: 'stopped',
+    103: STATE_CLOSING,
+    104: STATE_OPENING
 }

-UOM = ['97']
-STATES = [STATE_OPEN, STATE_CLOSED, 'closing', 'opening', 'stopped']
-

 # pylint: disable=unused-argument
 def setup_platform(hass, config: ConfigType,
                   add_devices: Callable[[list], None], discovery_info=None):
    """Set up the ISY994 cover platform."""
-    if isy.ISY is None or not isy.ISY.connected:
-        _LOGGER.error("A connection has not been made to the ISY controller")
-        return False
-
    devices = []
-
-    for node in isy.filter_nodes(isy.NODES, units=UOM, states=STATES):
+    for node in hass.data[ISY994_NODES][DOMAIN]:
        devices.append(ISYCoverDevice(node))

-    for program in isy.PROGRAMS.get(DOMAIN, []):
-        try:
-            status = program[isy.KEY_STATUS]
-            actions = program[isy.KEY_ACTIONS]
-            assert actions.dtype == 'program', 'Not a program'
-        except (KeyError, AssertionError):
-            pass
-        else:
-            devices.append(ISYCoverProgram(program.name, status, actions))
+    for name, status, actions in hass.data[ISY994_PROGRAMS][DOMAIN]:
+        devices.append(ISYCoverProgram(name, status, actions))

    add_devices(devices)


-class ISYCoverDevice(isy.ISYDevice, CoverDevice):
+class ISYCoverDevice(ISYDevice, CoverDevice):
    """Representation of an ISY994 cover device."""

    def __init__(self, node: object):
        """Initialize the ISY994 cover device."""
-        isy.ISYDevice.__init__(self, node)
+        super().__init__(node)

    @property
    def current_cover_position(self) -> int:
@@ -90,7 +80,7 @@ class ISYCoverProgram(ISYCoverDevice):

    def __init__(self, name: str, node: object, actions: object) -> None:
        """Initialize the ISY994 cover program."""
-        ISYCoverDevice.__init__(self, node)
+        super().__init__(node)
        self._name = name
        self._actions = actions

@@ -124,6 +124,11 @@ class KNXCover(CoverDevice):
        """Return the name of the KNX device."""
        return self.device.name

+    @property
+    def available(self):
+        """Return True if entity is available."""
+        return self.hass.data[DATA_KNX].connected
+
    @property
    def should_poll(self):
        """No polling needed within KNX."""
@@ -21,8 +21,9 @@ from homeassistant.const import (
    CONF_NAME, CONF_VALUE_TEMPLATE, CONF_OPTIMISTIC, STATE_OPEN,
    STATE_CLOSED, STATE_UNKNOWN)
 from homeassistant.components.mqtt import (
-    CONF_STATE_TOPIC, CONF_COMMAND_TOPIC, CONF_AVAILABILITY_TOPIC,
-    CONF_QOS, CONF_RETAIN, valid_publish_topic, valid_subscribe_topic)
+    CONF_AVAILABILITY_TOPIC, CONF_STATE_TOPIC, CONF_COMMAND_TOPIC,
+    CONF_PAYLOAD_AVAILABLE, CONF_PAYLOAD_NOT_AVAILABLE, CONF_QOS, CONF_RETAIN,
+    valid_publish_topic, valid_subscribe_topic, MqttAvailability)
 import homeassistant.helpers.config_validation as cv

 _LOGGER = logging.getLogger(__name__)
@@ -37,8 +38,6 @@ CONF_SET_POSITION_TEMPLATE = 'set_position_template'
 CONF_PAYLOAD_OPEN = 'payload_open'
 CONF_PAYLOAD_CLOSE = 'payload_close'
 CONF_PAYLOAD_STOP = 'payload_stop'
-CONF_PAYLOAD_AVAILABLE = 'payload_available'
-CONF_PAYLOAD_NOT_AVAILABLE = 'payload_not_available'
 CONF_STATE_OPEN = 'state_open'
 CONF_STATE_CLOSED = 'state_closed'
 CONF_TILT_CLOSED_POSITION = 'tilt_closed_value'
@@ -52,8 +51,6 @@ DEFAULT_NAME = 'MQTT Cover'
 DEFAULT_PAYLOAD_OPEN = 'OPEN'
 DEFAULT_PAYLOAD_CLOSE = 'CLOSE'
 DEFAULT_PAYLOAD_STOP = 'STOP'
-DEFAULT_PAYLOAD_AVAILABLE = 'online'
-DEFAULT_PAYLOAD_NOT_AVAILABLE = 'offline'
 DEFAULT_OPTIMISTIC = False
 DEFAULT_RETAIN = False
 DEFAULT_TILT_CLOSED_POSITION = 0
@@ -73,16 +70,11 @@ PLATFORM_SCHEMA = mqtt.MQTT_BASE_PLATFORM_SCHEMA.extend({
    vol.Optional(CONF_SET_POSITION_TEMPLATE, default=None): cv.template,
    vol.Optional(CONF_RETAIN, default=DEFAULT_RETAIN): cv.boolean,
    vol.Optional(CONF_STATE_TOPIC): valid_subscribe_topic,
-    vol.Optional(CONF_AVAILABILITY_TOPIC, default=None): valid_subscribe_topic,
    vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
    vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
    vol.Optional(CONF_PAYLOAD_OPEN, default=DEFAULT_PAYLOAD_OPEN): cv.string,
    vol.Optional(CONF_PAYLOAD_CLOSE, default=DEFAULT_PAYLOAD_CLOSE): cv.string,
    vol.Optional(CONF_PAYLOAD_STOP, default=DEFAULT_PAYLOAD_STOP): cv.string,
-    vol.Optional(CONF_PAYLOAD_AVAILABLE,
-                 default=DEFAULT_PAYLOAD_AVAILABLE): cv.string,
-    vol.Optional(CONF_PAYLOAD_NOT_AVAILABLE,
-                 default=DEFAULT_PAYLOAD_NOT_AVAILABLE): cv.string,
    vol.Optional(CONF_STATE_OPEN, default=STATE_OPEN): cv.string,
    vol.Optional(CONF_STATE_CLOSED, default=STATE_CLOSED): cv.string,
    vol.Optional(CONF_OPTIMISTIC, default=DEFAULT_OPTIMISTIC): cv.boolean,
@@ -98,7 +90,7 @@ PLATFORM_SCHEMA = mqtt.MQTT_BASE_PLATFORM_SCHEMA.extend({
                 default=DEFAULT_TILT_OPTIMISTIC): cv.boolean,
    vol.Optional(CONF_TILT_INVERT_STATE,
                 default=DEFAULT_TILT_INVERT_STATE): cv.boolean,
-})
+}).extend(mqtt.MQTT_AVAILABILITY_SCHEMA.schema)


@asyncio.coroutine
@@ -143,7 +135,7 @@ def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
    )])


-class MqttCover(CoverDevice):
+class MqttCover(MqttAvailability, CoverDevice):
    """Representation of a cover that can be controlled using MQTT."""

    def __init__(self, name, state_topic, command_topic, availability_topic,
@@ -154,21 +146,19 @@ class MqttCover(CoverDevice):
                 tilt_closed_position, tilt_min, tilt_max, tilt_optimistic,
                 tilt_invert, position_topic, set_position_template):
        """Initialize the cover."""
+        super().__init__(availability_topic, qos, payload_available,
+                         payload_not_available)
        self._position = None
        self._state = None
        self._name = name
        self._state_topic = state_topic
        self._command_topic = command_topic
-        self._availability_topic = availability_topic
-        self._available = True if availability_topic is None else False
        self._tilt_command_topic = tilt_command_topic
        self._tilt_status_topic = tilt_status_topic
        self._qos = qos
        self._payload_open = payload_open
        self._payload_close = payload_close
        self._payload_stop = payload_stop
-        self._payload_available = payload_available
-        self._payload_not_available = payload_not_available
        self._state_open = state_open
        self._state_closed = state_closed
        self._retain = retain
@@ -186,10 +176,9 @@ class MqttCover(CoverDevice):

    @asyncio.coroutine
    def async_added_to_hass(self):
-        """Subscribe MQTT events.
+        """Subscribe MQTT events."""
+        yield from super().async_added_to_hass()

-        This method is a coroutine.
-        """
        @callback
        def tilt_updated(topic, payload, qos):
            """Handle tilt updates."""
@@ -266,11 +255,6 @@ class MqttCover(CoverDevice):
        """Return the name of the cover."""
        return self._name

-    @property
-    def available(self) -> bool:
-        """Return if cover is available."""
-        return self._available
-
    @property
    def is_closed(self):
        """Return if the cover is closed."""
@@ -4,12 +4,29 @@ Support for RFXtrx cover components.
 For more details about this platform, please refer to the documentation
 https://home-assistant.io/components/cover.rfxtrx/
 """
+import voluptuous as vol
+
 import homeassistant.components.rfxtrx as rfxtrx
-from homeassistant.components.cover import CoverDevice
+from homeassistant.components.cover import CoverDevice, PLATFORM_SCHEMA
+from homeassistant.const import CONF_NAME
+from homeassistant.components.rfxtrx import (
+    CONF_AUTOMATIC_ADD, CONF_FIRE_EVENT, DEFAULT_SIGNAL_REPETITIONS,
+    CONF_SIGNAL_REPETITIONS, CONF_DEVICES)
+from homeassistant.helpers import config_validation as cv

 DEPENDENCIES = ['rfxtrx']

-PLATFORM_SCHEMA = rfxtrx.DEFAULT_SCHEMA
+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_DEVICES, default={}): {
+        cv.string: vol.Schema({
+            vol.Required(CONF_NAME): cv.string,
+            vol.Optional(CONF_FIRE_EVENT, default=False): cv.boolean
+        })
+    },
+    vol.Optional(CONF_AUTOMATIC_ADD, default=False):  cv.boolean,
+    vol.Optional(CONF_SIGNAL_REPETITIONS, default=DEFAULT_SIGNAL_REPETITIONS):
+        vol.Coerce(int),
+})


 def setup_platform(hass, config, add_devices_callback, discovery_info=None):
@@ -5,6 +5,7 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/cover.tahoma/
 """
 import logging
+from datetime import timedelta

 from homeassistant.components.cover import CoverDevice, ENTITY_ID_FORMAT
 from homeassistant.components.tahoma import (
@@ -14,6 +15,8 @@ DEPENDENCIES = ['tahoma']

 _LOGGER = logging.getLogger(__name__)

+SCAN_INTERVAL = timedelta(seconds=60)
+

 def setup_platform(hass, config, add_devices, discovery_info=None):
    """Set up Tahoma covers."""
@@ -70,4 +73,15 @@ class TahomaCover(TahomaDevice, CoverDevice):

    def stop_cover(self, **kwargs):
        """Stop the cover."""
-        self.apply_action('stopIdentify')
+        if self.tahoma_device.type == \
+           'io:RollerShutterWithLowSpeedManagementIOComponent':
+            self.apply_action('setPosition', 'secured')
+        else:
+            self.apply_action('stopIdentify')
+
+    def device_class(self):
+        """Return the class of this device, from component DEVICE_CLASSES."""
+        if self.tahoma_device.type == 'io:WindowOpenerVeluxIOComponent':
+            return 'window'
+        else:
+            return None
@@ -63,10 +63,15 @@ COVER_SCHEMA = vol.Schema({
    vol.Optional(CONF_TILT_OPTIMISTIC): cv.boolean,
    vol.Optional(POSITION_ACTION): cv.SCRIPT_SCHEMA,
    vol.Optional(TILT_ACTION): cv.SCRIPT_SCHEMA,
-    vol.Optional(CONF_FRIENDLY_NAME, default=None): cv.string,
+    vol.Optional(CONF_FRIENDLY_NAME): cv.string,
    vol.Optional(CONF_ENTITY_ID): cv.entity_ids
 })

+COVER_SCHEMA = vol.All(
+    cv.deprecated(CONF_ENTITY_ID),
+    COVER_SCHEMA,
+)
+
 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_COVERS): vol.Schema({cv.slug: COVER_SCHEMA}),
 })
@@ -41,7 +41,7 @@ class XiaomiGenericCover(XiaomiDevice, CoverDevice):
    @property
    def is_closed(self):
        """Return if the cover is closed."""
-        return self.current_cover_position < 0
+        return self.current_cover_position <= 0

    def close_cover(self, **kwargs):
        """Close the cover."""
@@ -0,0 +1,138 @@
+"""
+Platform for the Daikin AC.
+
+For more details about this component, please refer to the documentation
+https://home-assistant.io/components/daikin/
+"""
+import logging
+from datetime import timedelta
+from socket import timeout
+
+import voluptuous as vol
+
+import homeassistant.helpers.config_validation as cv
+from homeassistant.components.discovery import SERVICE_DAIKIN
+from homeassistant.const import (
+    CONF_HOSTS, CONF_ICON, CONF_MONITORED_CONDITIONS, CONF_NAME, CONF_TYPE
+)
+from homeassistant.helpers import discovery
+from homeassistant.helpers.discovery import load_platform
+from homeassistant.util import Throttle
+
+REQUIREMENTS = ['pydaikin==0.4']
+
+_LOGGER = logging.getLogger(__name__)
+
+DOMAIN = 'daikin'
+HTTP_RESOURCES = ['aircon/get_sensor_info', 'aircon/get_control_info']
+
+ATTR_TARGET_TEMPERATURE = 'target_temperature'
+ATTR_INSIDE_TEMPERATURE = 'inside_temperature'
+ATTR_OUTSIDE_TEMPERATURE = 'outside_temperature'
+
+MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=60)
+
+COMPONENT_TYPES = ['climate', 'sensor']
+
+SENSOR_TYPE_TEMPERATURE = 'temperature'
+
+SENSOR_TYPES = {
+    ATTR_INSIDE_TEMPERATURE: {
+        CONF_NAME: 'Inside Temperature',
+        CONF_ICON: 'mdi:thermometer',
+        CONF_TYPE: SENSOR_TYPE_TEMPERATURE
+    },
+    ATTR_OUTSIDE_TEMPERATURE: {
+        CONF_NAME: 'Outside Temperature',
+        CONF_ICON: 'mdi:thermometer',
+        CONF_TYPE: SENSOR_TYPE_TEMPERATURE
+    }
+
+}
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Optional(
+            CONF_HOSTS, default=[]
+        ): vol.All(cv.ensure_list, [cv.string]),
+        vol.Optional(
+            CONF_MONITORED_CONDITIONS,
+            default=list(SENSOR_TYPES.keys())
+        ): vol.All(cv.ensure_list, [vol.In(SENSOR_TYPES)])
+    })
+}, extra=vol.ALLOW_EXTRA)
+
+
+def setup(hass, config):
+    """Establish connection with Daikin."""
+    def discovery_dispatch(service, discovery_info):
+        """Dispatcher for Daikin discovery events."""
+        host = discovery_info.get('ip')
+
+        if daikin_api_setup(hass, host) is None:
+            return
+
+        for component in COMPONENT_TYPES:
+            load_platform(hass, component, DOMAIN, discovery_info,
+                          config)
+
+    discovery.listen(hass, SERVICE_DAIKIN, discovery_dispatch)
+
+    for host in config.get(DOMAIN, {}).get(CONF_HOSTS, []):
+        if daikin_api_setup(hass, host) is None:
+            continue
+
+        discovery_info = {
+            'ip': host,
+            CONF_MONITORED_CONDITIONS:
+                config[DOMAIN][CONF_MONITORED_CONDITIONS]
+        }
+        load_platform(hass, 'sensor', DOMAIN, discovery_info, config)
+
+    return True
+
+
+def daikin_api_setup(hass, host, name=None):
+    """Create a Daikin instance only once."""
+    if DOMAIN not in hass.data:
+        hass.data[DOMAIN] = {}
+
+    api = hass.data[DOMAIN].get(host)
+    if api is None:
+        from pydaikin import appliance
+
+        try:
+            device = appliance.Appliance(host)
+        except timeout:
+            _LOGGER.error("Connection to Daikin could not be established")
+            return False
+
+        if name is None:
+            name = device.values['name']
+
+        api = DaikinApi(device, name)
+
+    return api
+
+
+class DaikinApi(object):
+    """Keep the Daikin instance in one place and centralize the update."""
+
+    def __init__(self, device, name):
+        """Initialize the Daikin Handle."""
+        self.device = device
+        self.name = name
+        self.ip_address = device.ip
+
+    @Throttle(MIN_TIME_BETWEEN_UPDATES)
+    def update(self, **kwargs):
+        """Pull the latest data from Daikin."""
+        try:
+            for resource in HTTP_RESOURCES:
+                self.device.values.update(
+                    self.device.get_resource(resource)
+                )
+        except timeout:
+            _LOGGER.warning(
+                "Connection failed for %s", self.ip_address
+            )
@@ -0,0 +1,170 @@
+"""
+Support for deCONZ devices.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/deconz/
+"""
+
+import asyncio
+import logging
+import voluptuous as vol
+
+from homeassistant.const import (
+    CONF_API_KEY, CONF_HOST, CONF_PORT, EVENT_HOMEASSISTANT_STOP)
+from homeassistant.components.discovery import SERVICE_DECONZ
+from homeassistant.helpers import config_validation as cv
+from homeassistant.helpers import discovery
+from homeassistant.helpers.aiohttp_client import async_get_clientsession
+from homeassistant.util.json import load_json, save_json
+
+REQUIREMENTS = ['pydeconz==23']
+
+_LOGGER = logging.getLogger(__name__)
+
+DOMAIN = 'deconz'
+
+CONFIG_FILE = 'deconz.conf'
+
+CONFIG_SCHEMA = vol.Schema({
+    DOMAIN: vol.Schema({
+        vol.Optional(CONF_HOST): cv.string,
+        vol.Optional(CONF_API_KEY): cv.string,
+        vol.Optional(CONF_PORT, default=80): cv.port,
+    })
+}, extra=vol.ALLOW_EXTRA)
+
+SERVICE_FIELD = 'field'
+SERVICE_DATA = 'data'
+
+SERVICE_SCHEMA = vol.Schema({
+    vol.Required(SERVICE_FIELD): cv.string,
+    vol.Required(SERVICE_DATA): cv.string,
+})
+
+CONFIG_INSTRUCTIONS = """
+Unlock your deCONZ gateway to register with Home Assistant.
+
+1. [Go to deCONZ system settings](http://{}:{}/edit_system.html)
+2. Press "Unlock Gateway" button
+
+[deCONZ platform documentation](https://home-assistant.io/components/deconz/)
+"""
+
+
+@asyncio.coroutine
+def async_setup(hass, config):
+    """Setup services and configuration for deCONZ component."""
+    result = False
+    config_file = yield from hass.async_add_job(
+        load_json, hass.config.path(CONFIG_FILE))
+
+    @asyncio.coroutine
+    def async_deconz_discovered(service, discovery_info):
+        """Called when deCONZ gateway has been found."""
+        deconz_config = {}
+        deconz_config[CONF_HOST] = discovery_info.get(CONF_HOST)
+        deconz_config[CONF_PORT] = discovery_info.get(CONF_PORT)
+        yield from async_request_configuration(hass, config, deconz_config)
+
+    if config_file:
+        result = yield from async_setup_deconz(hass, config, config_file)
+
+    if not result and DOMAIN in config and CONF_HOST in config[DOMAIN]:
+        deconz_config = config[DOMAIN]
+        if CONF_API_KEY in deconz_config:
+            result = yield from async_setup_deconz(hass, config, deconz_config)
+        else:
+            yield from async_request_configuration(hass, config, deconz_config)
+            return True
+
+    if not result:
+        discovery.async_listen(hass, SERVICE_DECONZ, async_deconz_discovered)
+
+    return True
+
+
+@asyncio.coroutine
+def async_setup_deconz(hass, config, deconz_config):
+    """Setup deCONZ session.
+
+    Load config, group, light and sensor data for server information.
+    Start websocket for push notification of state changes from deCONZ.
+    """
+    from pydeconz import DeconzSession
+    websession = async_get_clientsession(hass)
+    deconz = DeconzSession(hass.loop, websession, **deconz_config)
+    result = yield from deconz.async_load_parameters()
+    if result is False:
+        _LOGGER.error("Failed to communicate with deCONZ.")
+        return False
+
+    hass.data[DOMAIN] = deconz
+
+    for component in ['binary_sensor', 'light', 'scene', 'sensor']:
+        hass.async_add_job(discovery.async_load_platform(
+            hass, component, DOMAIN, {}, config))
+    deconz.start()
+
+    @asyncio.coroutine
+    def async_configure(call):
+        """Set attribute of device in deCONZ.
+
+        Field is a string representing a specific device in deCONZ
+        e.g. field='/lights/1/state'.
+        Data is a json object with what data you want to alter
+        e.g. data={'on': true}.
+        {
+            "field": "/lights/1/state",
+            "data": {"on": true}
+        }
+        See Dresden Elektroniks REST API documentation for details:
+        http://dresden-elektronik.github.io/deconz-rest-doc/rest/
+        """
+        deconz = hass.data[DOMAIN]
+        field = call.data.get(SERVICE_FIELD)
+        data = call.data.get(SERVICE_DATA)
+        yield from deconz.async_put_state(field, data)
+    hass.services.async_register(
+        DOMAIN, 'configure', async_configure,
+        schema=SERVICE_SCHEMA)
+
+    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, deconz.close)
+    return True
+
+
+@asyncio.coroutine
+def async_request_configuration(hass, config, deconz_config):
+    """Request configuration steps from the user."""
+    configurator = hass.components.configurator
+
+    @asyncio.coroutine
+    def async_configuration_callback(data):
+        """Set up actions to do when our configuration callback is called."""
+        from pydeconz.utils import async_get_api_key
+        api_key = yield from async_get_api_key(hass.loop, **deconz_config)
+        if api_key:
+            deconz_config[CONF_API_KEY] = api_key
+            result = yield from async_setup_deconz(hass, config, deconz_config)
+            if result:
+                yield from hass.async_add_job(save_json,
+                                              hass.config.path(CONFIG_FILE),
+                                              deconz_config)
+                configurator.async_request_done(request_id)
+                return
+            else:
+                configurator.async_notify_errors(
+                    request_id, "Couldn't load configuration.")
+        else:
+            configurator.async_notify_errors(
+                request_id, "Couldn't get an API key.")
+        return
+
+    instructions = CONFIG_INSTRUCTIONS.format(
+        deconz_config[CONF_HOST], deconz_config[CONF_PORT])
+
+    request_id = configurator.async_request_config(
+        "deCONZ", async_configuration_callback,
+        description=instructions,
+        entity_picture="/static/images/logo_deconz.jpeg",
+        submit_caption="I have unlocked the gateway",
+    )
@@ -0,0 +1,10 @@
+
+configure:
+  description: Set attribute of device in Deconz. See Dresden Elektroniks REST API documentation for details http://dresden-elektronik.github.io/deconz-rest-doc/rest/
+  fields:
+    field:
+      description: Field is a string representing a specific device in Deconz.
+      example: '/lights/1/state'
+    data:
+      description: Data is a json object with what data you want to alter.
+      example: '{"on": true}'
@@ -7,7 +7,6 @@ https://home-assistant.io/components/device_tracker/
 import asyncio
 from datetime import timedelta
 import logging
-import os
 from typing import Any, List, Sequence, Callable

 import aiohttp
@@ -81,6 +80,8 @@ ATTR_VENDOR = 'vendor'

 SOURCE_TYPE_GPS = 'gps'
 SOURCE_TYPE_ROUTER = 'router'
+SOURCE_TYPE_BLUETOOTH = 'bluetooth'
+SOURCE_TYPE_BLUETOOTH_LE = 'bluetooth_le'

 NEW_DEVICE_DEFAULTS_SCHEMA = vol.Any(None, vol.Schema({
    vol.Optional(CONF_TRACK_NEW, default=DEFAULT_TRACK_NEW): cv.boolean,
@@ -88,7 +89,7 @@ NEW_DEVICE_DEFAULTS_SCHEMA = vol.Any(None, vol.Schema({
 }))
 PLATFORM_SCHEMA = cv.PLATFORM_SCHEMA.extend({
    vol.Optional(CONF_SCAN_INTERVAL): cv.time_period,
-    vol.Optional(CONF_TRACK_NEW, default=DEFAULT_TRACK_NEW): cv.boolean,
+    vol.Optional(CONF_TRACK_NEW): cv.boolean,
    vol.Optional(CONF_CONSIDER_HOME,
                 default=DEFAULT_CONSIDER_HOME): vol.All(
                     cv.time_period, cv.positive_timedelta),
@@ -131,8 +132,11 @@ def async_setup(hass: HomeAssistantType, config: ConfigType):
    conf = config.get(DOMAIN, [])
    conf = conf[0] if conf else {}
    consider_home = conf.get(CONF_CONSIDER_HOME, DEFAULT_CONSIDER_HOME)
-    track_new = conf.get(CONF_TRACK_NEW, DEFAULT_TRACK_NEW)
+
    defaults = conf.get(CONF_NEW_DEVICE_DEFAULTS, {})
+    track_new = conf.get(CONF_TRACK_NEW)
+    if track_new is None:
+        track_new = defaults.get(CONF_TRACK_NEW, DEFAULT_TRACK_NEW)

    devices = yield from async_load_config(yaml_path, hass, consider_home)
    tracker = DeviceTracker(
@@ -204,12 +208,7 @@ def async_setup(hass: HomeAssistantType, config: ConfigType):
                 ATTR_GPS, ATTR_GPS_ACCURACY, ATTR_BATTERY, ATTR_ATTRIBUTES)}
        yield from tracker.async_see(**args)

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file,
-        os.path.join(os.path.dirname(__file__), 'services.yaml')
-    )
-    hass.services.async_register(
-        DOMAIN, SERVICE_SEE, async_see_service, descriptions.get(SERVICE_SEE))
+    hass.services.async_register(DOMAIN, SERVICE_SEE, async_see_service)

    # restore
    yield from tracker.async_setup_tracked_device()
@@ -227,7 +226,8 @@ class DeviceTracker(object):
        self.devices = {dev.dev_id: dev for dev in devices}
        self.mac_to_dev = {dev.mac: dev for dev in devices if dev.mac}
        self.consider_home = consider_home
-        self.track_new = defaults.get(CONF_TRACK_NEW, track_new)
+        self.track_new = track_new if track_new is not None \
+            else defaults.get(CONF_TRACK_NEW, DEFAULT_TRACK_NEW)
        self.defaults = defaults
        self.group = None
        self._is_updating = asyncio.Lock(loop=hass.loop)
@@ -67,6 +67,15 @@ _IP_NEIGH_REGEX = re.compile(
    r'\s?(router)?'
    r'(?P<status>(\w+))')

+_ARP_CMD = 'arp -n'
+_ARP_REGEX = re.compile(
+    r'.+\s' +
+    r'\((?P<ip>([0-9]{1,3}[\.]){3}[0-9]{1,3})\)\s' +
+    r'.+\s' +
+    r'(?P<mac>(([0-9a-f]{2}[:-]){5}([0-9a-f]{2})))' +
+    r'\s' +
+    r'.*')
+

 # pylint: disable=unused-argument
 def get_scanner(hass, config):
@@ -76,7 +85,22 @@ def get_scanner(hass, config):
    return scanner if scanner.success_init else None


-AsusWrtResult = namedtuple('AsusWrtResult', 'neighbors leases')
+def _parse_lines(lines, regex):
+    """Parse the lines using the given regular expression.
+
+    If a line can't be parsed it is logged and skipped in the output.
+    """
+    results = []
+    for line in lines:
+        match = regex.search(line)
+        if not match:
+            _LOGGER.debug("Could not parse row: %s", line)
+            continue
+        results.append(match.groupdict())
+    return results
+
+
+Device = namedtuple('Device', ['mac', 'ip', 'name'])


 class AsusWrtDeviceScanner(DeviceScanner):
@@ -121,16 +145,13 @@ class AsusWrtDeviceScanner(DeviceScanner):
    def scan_devices(self):
        """Scan for new devices and return a list with found device IDs."""
        self._update_info()
-        return [client['mac'] for client in self.last_results]
+        return list(self.last_results.keys())

    def get_device_name(self, device):
        """Return the name of the given device or None if we don't know."""
-        if not self.last_results:
+        if device not in self.last_results:
            return None
-        for client in self.last_results:
-            if client['mac'] == device:
-                return client['host']
-        return None
+        return self.last_results[device].name

    def _update_info(self):
        """Ensure the information from the ASUSWRT router is up to date.
@@ -145,74 +166,88 @@ class AsusWrtDeviceScanner(DeviceScanner):
        if not data:
            return False

-        active_clients = [client for client in data.values() if
-                          client['status'] == 'REACHABLE' or
-                          client['status'] == 'DELAY' or
-                          client['status'] == 'STALE' or
-                          client['status'] == 'IN_ASSOCLIST']
-        self.last_results = active_clients
+        self.last_results = data
        return True

    def get_asuswrt_data(self):
-        """Retrieve data from ASUSWRT and return parsed result."""
-        result = self.connection.get_result()
-
-        if not result:
-            return {}
+        """Retrieve data from ASUSWRT.

+        Calls various commands on the router and returns the superset of all
+        responses. Some commands will not work on some routers.
+        """
        devices = {}
-        if self.mode == 'ap':
-            for lease in result.leases:
-                match = _WL_REGEX.search(lease.decode('utf-8'))
-
-                if not match:
-                    _LOGGER.warning("Could not parse wl row: %s", lease)
-                    continue
-
-                host = ''
-
-                devices[match.group('mac').upper()] = {
-                    'host': host,
-                    'status': 'IN_ASSOCLIST',
-                    'ip': '',
-                    'mac': match.group('mac').upper(),
-                    }
-
-        else:
-            for lease in result.leases:
-                if lease.startswith(b'duid '):
-                    continue
-                match = _LEASES_REGEX.search(lease.decode('utf-8'))
-
-                if not match:
-                    _LOGGER.warning("Could not parse lease row: %s", lease)
-                    continue
-
-                # For leases where the client doesn't set a hostname, ensure it
-                # is blank and not '*', which breaks entity_id down the line.
-                host = match.group('host')
-                if host == '*':
-                    host = ''
-
-                devices[match.group('mac')] = {
-                    'host': host,
-                    'status': '',
-                    'ip': match.group('ip'),
-                    'mac': match.group('mac').upper(),
-                    }
-
-            for neighbor in result.neighbors:
-                match = _IP_NEIGH_REGEX.search(neighbor.decode('utf-8'))
-                if not match:
-                    _LOGGER.warning("Could not parse neighbor row: %s",
-                                    neighbor)
-                    continue
-                if match.group('mac') in devices:
-                    devices[match.group('mac')]['status'] = (
-                        match.group('status'))
-
+        devices.update(self._get_wl())
+        devices = self._get_arp(devices)
+        devices = self._get_neigh(devices)
+        if not self.mode == 'ap':
+            devices.update(self._get_leases(devices))
        return devices

+    def _get_wl(self):
+        lines = self.connection.run_command(_WL_CMD)
+        if not lines:
+            return {}
+        result = _parse_lines(lines, _WL_REGEX)
+        devices = {}
+        for device in result:
+            mac = device['mac'].upper()
+            devices[mac] = Device(mac, None, None)
+        return devices
+
+    def _get_leases(self, cur_devices):
+        lines = self.connection.run_command(_LEASES_CMD)
+        if not lines:
+            return {}
+        lines = [line for line in lines if not line.startswith('duid ')]
+        result = _parse_lines(lines, _LEASES_REGEX)
+        devices = {}
+        for device in result:
+            # For leases where the client doesn't set a hostname, ensure it
+            # is blank and not '*', which breaks entity_id down the line.
+            host = device['host']
+            if host == '*':
+                host = ''
+            mac = device['mac'].upper()
+            if mac in cur_devices:
+                devices[mac] = Device(mac, device['ip'], host)
+        return devices
+
+    def _get_neigh(self, cur_devices):
+        lines = self.connection.run_command(_IP_NEIGH_CMD)
+        if not lines:
+            return {}
+        result = _parse_lines(lines, _IP_NEIGH_REGEX)
+        devices = {}
+        for device in result:
+            if device['mac']:
+                mac = device['mac'].upper()
+                devices[mac] = Device(mac, None, None)
+            else:
+                cur_devices = {
+                    k: v for k, v in
+                    cur_devices.items() if v.ip != device['ip']
+                }
+        cur_devices.update(devices)
+        return cur_devices
+
+    def _get_arp(self, cur_devices):
+        lines = self.connection.run_command(_ARP_CMD)
+        if not lines:
+            return {}
+        result = _parse_lines(lines, _ARP_REGEX)
+        devices = {}
+        for device in result:
+            if device['mac']:
+                mac = device['mac'].upper()
+                devices[mac] = Device(mac, device['ip'], None)
+            else:
+                cur_devices = {
+                    k: v for k, v in
+                    cur_devices.items() if v.ip != device['ip']
+                }
+        cur_devices.update(devices)
+        return cur_devices
+

 class _Connection:
    def __init__(self):
@@ -247,8 +282,8 @@ class SshConnection(_Connection):
        self._ssh_key = ssh_key
        self._ap = ap

-    def get_result(self):
-        """Retrieve a single AsusWrtResult through an SSH connection.
+    def run_command(self, command):
+        """Run commands through an SSH connection.

        Connect to the SSH server if not currently connected, otherwise
        use the existing connection.
@@ -258,19 +293,10 @@ class SshConnection(_Connection):
        try:
            if not self.connected:
                self.connect()
-            if self._ap:
-                neighbors = ['']
-                self._ssh.sendline(_WL_CMD)
-                self._ssh.prompt()
-                leases_result = self._ssh.before.split(b'\n')[1:-1]
-            else:
-                self._ssh.sendline(_IP_NEIGH_CMD)
-                self._ssh.prompt()
-                neighbors = self._ssh.before.split(b'\n')[1:-1]
-                self._ssh.sendline(_LEASES_CMD)
-                self._ssh.prompt()
-                leases_result = self._ssh.before.split(b'\n')[1:-1]
-            return AsusWrtResult(neighbors, leases_result)
+            self._ssh.sendline(command)
+            self._ssh.prompt()
+            lines = self._ssh.before.split(b'\n')[1:-1]
+            return [line.decode('utf-8') for line in lines]
        except exceptions.EOF as err:
            _LOGGER.error("Connection refused. SSH enabled?")
            self.disconnect()
@@ -326,8 +352,8 @@ class TelnetConnection(_Connection):
        self._ap = ap
        self._prompt_string = None

-    def get_result(self):
-        """Retrieve a single AsusWrtResult through a Telnet connection.
+    def run_command(self, command):
+        """Run a command through a Telnet connection.

        Connect to the Telnet server if not currently connected, otherwise
        use the existing connection.
@@ -336,18 +362,10 @@ class TelnetConnection(_Connection):
            if not self.connected:
                self.connect()

-            self._telnet.write('{}\n'.format(_IP_NEIGH_CMD).encode('ascii'))
-            neighbors = (self._telnet.read_until(self._prompt_string).
-                         split(b'\n')[1:-1])
-            if self._ap:
-                self._telnet.write('{}\n'.format(_WL_CMD).encode('ascii'))
-                leases_result = (self._telnet.read_until(self._prompt_string).
-                                 split(b'\n')[1:-1])
-            else:
-                self._telnet.write('{}\n'.format(_LEASES_CMD).encode('ascii'))
-                leases_result = (self._telnet.read_until(self._prompt_string).
-                                 split(b'\n')[1:-1])
-            return AsusWrtResult(neighbors, leases_result)
+            self._telnet.write('{}\n'.format(command).encode('ascii'))
+            data = (self._telnet.read_until(self._prompt_string).
+                    split(b'\n')[1:-1])
+            return [line.decode('utf-8') for line in data]
        except EOFError:
            _LOGGER.error("Unexpected response from router")
            self.disconnect()
@@ -10,7 +10,7 @@ import voluptuous as vol
 from homeassistant.helpers.event import track_point_in_utc_time
 from homeassistant.components.device_tracker import (
    YAML_DEVICES, CONF_TRACK_NEW, CONF_SCAN_INTERVAL, DEFAULT_SCAN_INTERVAL,
-    PLATFORM_SCHEMA, load_config
+    PLATFORM_SCHEMA, load_config, SOURCE_TYPE_BLUETOOTH_LE
 )
 import homeassistant.util.dt as dt_util
 import homeassistant.helpers.config_validation as cv
@@ -54,7 +54,8 @@ def setup_scanner(hass, config, see, discovery_info=None):
                new_devices[address] = 1
                return

-        see(mac=BLE_PREFIX + address, host_name=name.strip("\x00"))
+        see(mac=BLE_PREFIX + address, host_name=name.strip("\x00"),
+            source_type=SOURCE_TYPE_BLUETOOTH_LE)

    def discover_ble_devices():
        """Discover Bluetooth LE devices."""
@@ -12,7 +12,7 @@ import homeassistant.helpers.config_validation as cv
 from homeassistant.helpers.event import track_point_in_utc_time
 from homeassistant.components.device_tracker import (
    YAML_DEVICES, CONF_TRACK_NEW, CONF_SCAN_INTERVAL, DEFAULT_SCAN_INTERVAL,
-    load_config, PLATFORM_SCHEMA, DEFAULT_TRACK_NEW)
+    load_config, PLATFORM_SCHEMA, DEFAULT_TRACK_NEW, SOURCE_TYPE_BLUETOOTH)
 import homeassistant.util.dt as dt_util

 _LOGGER = logging.getLogger(__name__)
@@ -33,7 +33,8 @@ def setup_scanner(hass, config, see, discovery_info=None):

    def see_device(device):
        """Mark a device as seen."""
-        see(mac=BT_PREFIX + device[0], host_name=device[1])
+        see(mac=BT_PREFIX + device[0], host_name=device[1],
+            source_type=SOURCE_TYPE_BLUETOOTH)

    def discover_devices():
        """Discover Bluetooth devices."""
@@ -5,23 +5,37 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/device_tracker.gpslogger/
 """
 import asyncio
-from functools import partial
 import logging
+from hmac import compare_digest

-from homeassistant.const import HTTP_UNPROCESSABLE_ENTITY
-from homeassistant.components.http import HomeAssistantView
+from aiohttp.web import Request, HTTPUnauthorized  # NOQA
+import voluptuous as vol
+
+import homeassistant.helpers.config_validation as cv
+from homeassistant.const import (
+    CONF_PASSWORD, HTTP_UNPROCESSABLE_ENTITY
+)
+from homeassistant.components.http import (
+    CONF_API_PASSWORD, HomeAssistantView
+)
 # pylint: disable=unused-import
 from homeassistant.components.device_tracker import (  # NOQA
-    DOMAIN, PLATFORM_SCHEMA)
+    DOMAIN, PLATFORM_SCHEMA
+)

 _LOGGER = logging.getLogger(__name__)

 DEPENDENCIES = ['http']

+PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
+    vol.Optional(CONF_PASSWORD): cv.string,
+})

-def setup_scanner(hass, config, see, discovery_info=None):
+
+@asyncio.coroutine
+def async_setup_scanner(hass, config, async_see, discovery_info=None):
    """Set up an endpoint for the GPSLogger application."""
-    hass.http.register_view(GPSLoggerView(see))
+    hass.http.register_view(GPSLoggerView(async_see, config))

    return True

@@ -32,26 +46,36 @@ class GPSLoggerView(HomeAssistantView):
    url = '/api/gpslogger'
    name = 'api:gpslogger'

-    def __init__(self, see):
+    def __init__(self, async_see, config):
        """Initialize GPSLogger url endpoints."""
-        self.see = see
+        self.async_see = async_see
+        self._password = config.get(CONF_PASSWORD)
+        # this component does not require external authentication if
+        # password is set
+        self.requires_auth = self._password is None

    @asyncio.coroutine
-    def get(self, request):
+    def get(self, request: Request):
        """Handle for GPSLogger message received as GET."""
-        res = yield from self._handle(request.app['hass'], request.query)
-        return res
+        hass = request.app['hass']
+        data = request.query
+
+        if self._password is not None:
+            authenticated = CONF_API_PASSWORD in data and compare_digest(
+                self._password,
+                data[CONF_API_PASSWORD]
+            )
+            if not authenticated:
+                raise HTTPUnauthorized()

-    @asyncio.coroutine
-    def _handle(self, hass, data):
-        """Handle GPSLogger requests."""
        if 'latitude' not in data or 'longitude' not in data:
            return ('Latitude and longitude not specified.',
                    HTTP_UNPROCESSABLE_ENTITY)

        if 'device' not in data:
            _LOGGER.error("Device id not specified")
-            return ('Device id not specified.', HTTP_UNPROCESSABLE_ENTITY)
+            return ('Device id not specified.',
+                    HTTP_UNPROCESSABLE_ENTITY)

        device = data['device'].replace('-', '')
        gps_location = (data['latitude'], data['longitude'])
@@ -75,10 +99,11 @@ class GPSLoggerView(HomeAssistantView):
        if 'activity' in data:
            attrs['activity'] = data['activity']

-        yield from hass.async_add_job(
-            partial(self.see, dev_id=device,
-                    gps=gps_location, battery=battery,
-                    gps_accuracy=accuracy,
-                    attributes=attrs))
+        hass.async_add_job(self.async_see(
+            dev_id=device,
+            gps=gps_location, battery=battery,
+            gps_accuracy=accuracy,
+            attributes=attrs
+        ))

        return 'Setting location for {}'.format(device)
@@ -32,19 +32,27 @@ CONF_MAX_GPS_ACCURACY = 'max_gps_accuracy'
 CONF_SECRET = 'secret'
 CONF_WAYPOINT_IMPORT = 'waypoints'
 CONF_WAYPOINT_WHITELIST = 'waypoint_whitelist'
+CONF_MQTT_TOPIC = 'mqtt_topic'
+CONF_REGION_MAPPING = 'region_mapping'
+CONF_EVENTS_ONLY = 'events_only'

 DEPENDENCIES = ['mqtt']

-OWNTRACKS_TOPIC = 'owntracks/#'
+DEFAULT_OWNTRACKS_TOPIC = 'owntracks/#'
+REGION_MAPPING = {}

 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Optional(CONF_MAX_GPS_ACCURACY): vol.Coerce(float),
    vol.Optional(CONF_WAYPOINT_IMPORT, default=True): cv.boolean,
+    vol.Optional(CONF_EVENTS_ONLY, default=False): cv.boolean,
+    vol.Optional(CONF_MQTT_TOPIC, default=DEFAULT_OWNTRACKS_TOPIC):
+        mqtt.valid_subscribe_topic,
    vol.Optional(CONF_WAYPOINT_WHITELIST): vol.All(
        cv.ensure_list, [cv.string]),
    vol.Optional(CONF_SECRET): vol.Any(
        vol.Schema({vol.Optional(cv.string): cv.string}),
-        cv.string)
+        cv.string),
+    vol.Optional(CONF_REGION_MAPPING, default=REGION_MAPPING): dict
 })


@@ -82,31 +90,39 @@ def async_setup_scanner(hass, config, async_see, discovery_info=None):
        yield from async_handle_message(hass, context, message)

    yield from mqtt.async_subscribe(
-        hass, OWNTRACKS_TOPIC, async_handle_mqtt_message, 1)
+        hass, context.mqtt_topic, async_handle_mqtt_message, 1)

    return True


-def _parse_topic(topic):
-    """Parse an MQTT topic owntracks/user/dev, return (user, dev) tuple.
+def _parse_topic(topic, subscribe_topic):
+    """Parse an MQTT topic {sub_topic}/user/dev, return (user, dev) tuple.

    Async friendly.
    """
+    subscription = subscribe_topic.split('/')
    try:
-        _, user, device, *_ = topic.split('/', 3)
+        user_index = subscription.index('#')
    except ValueError:
+        _LOGGER.error("Can't parse subscription topic: '%s'", subscribe_topic)
+        raise
+
+    topic_list = topic.split('/')
+    try:
+        user, device = topic_list[user_index], topic_list[user_index + 1]
+    except IndexError:
        _LOGGER.error("Can't parse topic: '%s'", topic)
        raise

    return user, device


-def _parse_see_args(message):
+def _parse_see_args(message, subscribe_topic):
    """Parse the OwnTracks location parameters, into the format see expects.

    Async friendly.
    """
-    user, device = _parse_topic(message['topic'])
+    user, device = _parse_topic(message['topic'], subscribe_topic)
    dev_id = slugify('{}_{}'.format(user, device))
    kwargs = {
        'dev_id': dev_id,
@@ -185,16 +201,20 @@ def context_from_config(async_see, config):
    waypoint_import = config.get(CONF_WAYPOINT_IMPORT)
    waypoint_whitelist = config.get(CONF_WAYPOINT_WHITELIST)
    secret = config.get(CONF_SECRET)
+    region_mapping = config.get(CONF_REGION_MAPPING)
+    events_only = config.get(CONF_EVENTS_ONLY)
+    mqtt_topic = config.get(CONF_MQTT_TOPIC)

    return OwnTracksContext(async_see, secret, max_gps_accuracy,
-                            waypoint_import, waypoint_whitelist)
+                            waypoint_import, waypoint_whitelist,
+                            region_mapping, events_only, mqtt_topic)


 class OwnTracksContext:
    """Hold the current OwnTracks context."""

    def __init__(self, async_see, secret, max_gps_accuracy, import_waypoints,
-                 waypoint_whitelist):
+                 waypoint_whitelist, region_mapping, events_only, mqtt_topic):
        """Initialize an OwnTracks context."""
        self.async_see = async_see
        self.secret = secret
@@ -203,6 +223,9 @@ class OwnTracksContext:
        self.regions_entered = defaultdict(list)
        self.import_waypoints = import_waypoints
        self.waypoint_whitelist = waypoint_whitelist
+        self.region_mapping = region_mapping
+        self.events_only = events_only
+        self.mqtt_topic = mqtt_topic

    @callback
    def async_valid_accuracy(self, message):
@@ -267,7 +290,11 @@ def async_handle_location_message(hass, context, message):
    if not context.async_valid_accuracy(message):
        return

-    dev_id, kwargs = _parse_see_args(message)
+    if context.events_only:
+        _LOGGER.debug("Location update ignored due to events_only setting")
+        return
+
+    dev_id, kwargs = _parse_see_args(message, context.mqtt_topic)

    if context.regions_entered[dev_id]:
        _LOGGER.debug(
@@ -283,7 +310,7 @@ def async_handle_location_message(hass, context, message):
 def _async_transition_message_enter(hass, context, message, location):
    """Execute enter event."""
    zone = hass.states.get("zone.{}".format(slugify(location)))
-    dev_id, kwargs = _parse_see_args(message)
+    dev_id, kwargs = _parse_see_args(message, context.mqtt_topic)

    if zone is None and message.get('t') == 'b':
        # Not a HA zone, and a beacon so mobile beacon.
@@ -309,7 +336,7 @@ def _async_transition_message_enter(hass, context, message, location):
@asyncio.coroutine
 def _async_transition_message_leave(hass, context, message, location):
    """Execute leave event."""
-    dev_id, kwargs = _parse_see_args(message)
+    dev_id, kwargs = _parse_see_args(message, context.mqtt_topic)
    regions = context.regions_entered[dev_id]

    if location in regions:
@@ -352,6 +379,12 @@ def async_handle_transition_message(hass, context, message):
    # OwnTracks uses - at the start of a beacon zone
    # to switch on 'hold mode' - ignore this
    location = message['desc'].lstrip("-")
+
+    # Create a layer of indirection for Owntracks instances that may name
+    # regions differently than their HA names
+    if location in context.region_mapping:
+        location = context.region_mapping[location]
+
    if location.lower() == 'home':
        location = STATE_HOME

@@ -398,7 +431,7 @@ def async_handle_waypoints_message(hass, context, message):
        return

    if context.waypoint_whitelist is not None:
-        user = _parse_topic(message['topic'])[0]
+        user = _parse_topic(message['topic'], context.mqtt_topic)[0]

        if user not in context.waypoint_whitelist:
            return
@@ -410,7 +443,7 @@ def async_handle_waypoints_message(hass, context, message):

    _LOGGER.info("Got %d waypoints from %s", len(wayps), message['topic'])

-    name_base = ' '.join(_parse_topic(message['topic']))
+    name_base = ' '.join(_parse_topic(message['topic'], context.mqtt_topic))

    for wayp in wayps:
        yield from async_handle_waypoint(hass, name_base, wayp)
@@ -5,6 +5,7 @@ For more details about this platform, please refer to the documentation at
 https://home-assistant.io/components/device_tracker.owntracks_http/
 """
 import asyncio
+import re

 from aiohttp.web_exceptions import HTTPInternalServerError

@@ -43,8 +44,11 @@ class OwnTracksView(HomeAssistantView):
        """Handle an OwnTracks message."""
        hass = request.app['hass']

+        subscription = self.context.mqtt_topic
+        topic = re.sub('/#$', '', subscription)
+
        message = yield from request.json()
-        message['topic'] = 'owntracks/{}/{}'.format(user, device)
+        message['topic'] = '{}/{}/{}'.format(topic, user, device)

        try:
            yield from async_handle_message(hass, self.context, message)
@@ -13,8 +13,8 @@ import voluptuous as vol

 import homeassistant.helpers.config_validation as cv
 from homeassistant.components.device_tracker import (
-    PLATFORM_SCHEMA, DEFAULT_SCAN_INTERVAL, SOURCE_TYPE_ROUTER)
-from homeassistant.helpers.event import track_point_in_utc_time
+    PLATFORM_SCHEMA, CONF_SCAN_INTERVAL, DEFAULT_SCAN_INTERVAL,
+    SOURCE_TYPE_ROUTER)
 from homeassistant import util
 from homeassistant import const

@@ -70,16 +70,21 @@ def setup_scanner(hass, config, see, discovery_info=None):
    """Set up the Host objects and return the update function."""
    hosts = [Host(ip, dev_id, hass, config) for (dev_id, ip) in
             config[const.CONF_HOSTS].items()]
-    interval = timedelta(seconds=len(hosts) * config[CONF_PING_COUNT]) + \
-        DEFAULT_SCAN_INTERVAL
-    _LOGGER.info("Started ping tracker with interval=%s on hosts: %s",
-                 interval, ",".join([host.ip_address for host in hosts]))
+    interval = config.get(CONF_SCAN_INTERVAL,
+                          timedelta(seconds=len(hosts) *
+                                    config[CONF_PING_COUNT])
+                          + DEFAULT_SCAN_INTERVAL)
+    _LOGGER.debug("Started ping tracker with interval=%s on hosts: %s",
+                  interval, ",".join([host.ip_address for host in hosts]))

-    def update(now):
+    def update_interval(now):
        """Update all the hosts on every interval time."""
-        for host in hosts:
-            host.update(see)
-        track_point_in_utc_time(hass, update, util.dt.utcnow() + interval)
-        return True
+        try:
+            for host in hosts:
+                host.update(see)
+        finally:
+            hass.helpers.event.track_point_in_utc_time(
+                update_interval, util.dt.utcnow() + interval)

-    return update(util.dt.utcnow())
+    update_interval(None)
+    return True
@@ -14,7 +14,7 @@ from homeassistant.components.device_tracker import (
    DOMAIN, PLATFORM_SCHEMA, DeviceScanner)
 from homeassistant.const import CONF_HOST

-REQUIREMENTS = ['pysnmp==4.4.2']
+REQUIREMENTS = ['pysnmp==4.4.4']

 _LOGGER = logging.getLogger(__name__)

@@ -19,7 +19,7 @@ from homeassistant.util.json import load_json, save_json

 _LOGGER = logging.getLogger(__name__)

-REQUIREMENTS = ['pytile==1.0.0']
+REQUIREMENTS = ['pytile==1.1.0']

 CLIENT_UUID_CONFIG_FILE = '.tile.conf'
 DEFAULT_ICON = 'mdi:bluetooth'
@@ -29,14 +29,15 @@ ATTR_ALTITUDE = 'altitude'
 ATTR_CONNECTION_STATE = 'connection_state'
 ATTR_IS_DEAD = 'is_dead'
 ATTR_IS_LOST = 'is_lost'
-ATTR_LAST_SEEN = 'last_seen'
-ATTR_LAST_UPDATED = 'last_updated'
 ATTR_RING_STATE = 'ring_state'
 ATTR_VOIP_STATE = 'voip_state'

+CONF_SHOW_INACTIVE = 'show_inactive'
+
 PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
    vol.Required(CONF_USERNAME): cv.string,
    vol.Required(CONF_PASSWORD): cv.string,
+    vol.Optional(CONF_SHOW_INACTIVE, default=False): cv.boolean,
    vol.Optional(CONF_MONITORED_VARIABLES):
        vol.All(cv.ensure_list, [vol.In(DEVICE_TYPES)]),
 })
@@ -79,6 +80,7 @@ class TileDeviceScanner(DeviceScanner):
        _LOGGER.debug('Client UUID: %s', self._client.client_uuid)
        _LOGGER.debug('User UUID: %s', self._client.user_uuid)

+        self._show_inactive = config.get(CONF_SHOW_INACTIVE)
        self._types = config.get(CONF_MONITORED_VARIABLES)

        self.devices = {}
@@ -91,29 +93,25 @@ class TileDeviceScanner(DeviceScanner):

    def _update_info(self, now=None) -> None:
        """Update the device info."""
-        device_data = self._client.get_tiles(type_whitelist=self._types)
+        self.devices = self._client.get_tiles(
+            type_whitelist=self._types, show_inactive=self._show_inactive)

-        try:
-            self.devices = device_data['result']
-        except KeyError:
+        if not self.devices:
            _LOGGER.warning('No Tiles found')
-            _LOGGER.debug(device_data)
            return

-        for info in self.devices.values():
-            dev_id = 'tile_{0}'.format(slugify(info['name']))
-            lat = info['tileState']['latitude']
-            lon = info['tileState']['longitude']
+        for dev in self.devices:
+            dev_id = 'tile_{0}'.format(slugify(dev['name']))
+            lat = dev['tileState']['latitude']
+            lon = dev['tileState']['longitude']

            attrs = {
-                ATTR_ALTITUDE: info['tileState']['altitude'],
-                ATTR_CONNECTION_STATE: info['tileState']['connection_state'],
-                ATTR_IS_DEAD: info['is_dead'],
-                ATTR_IS_LOST: info['tileState']['is_lost'],
-                ATTR_LAST_SEEN: info['tileState']['timestamp'],
-                ATTR_LAST_UPDATED: device_data['timestamp_ms'],
-                ATTR_RING_STATE: info['tileState']['ring_state'],
-                ATTR_VOIP_STATE: info['tileState']['voip_state'],
+                ATTR_ALTITUDE: dev['tileState']['altitude'],
+                ATTR_CONNECTION_STATE: dev['tileState']['connection_state'],
+                ATTR_IS_DEAD: dev['is_dead'],
+                ATTR_IS_LOST: dev['tileState']['is_lost'],
+                ATTR_RING_STATE: dev['tileState']['ring_state'],
+                ATTR_VOIP_STATE: dev['tileState']['voip_state'],
            }

            self.see(
@@ -9,7 +9,7 @@ import logging

 import voluptuous as vol

-from homeassistant.const import HTTP_BAD_REQUEST
+from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers import intent, template
 from homeassistant.components.http import HomeAssistantView

@@ -33,6 +33,10 @@ CONFIG_SCHEMA = vol.Schema({
 }, extra=vol.ALLOW_EXTRA)


+class DialogFlowError(HomeAssistantError):
+    """Raised when a DialogFlow error happens."""
+
+
@asyncio.coroutine
 def async_setup(hass, config):
    """Set up Dialogflow component."""
@@ -51,57 +55,71 @@ class DialogflowIntentsView(HomeAssistantView):
    def post(self, request):
        """Handle Dialogflow."""
        hass = request.app['hass']
-        data = yield from request.json()
+        message = yield from request.json()

-        _LOGGER.debug("Received Dialogflow request: %s", data)
-
-        req = data.get('result')
-
-        if req is None:
-            _LOGGER.error("Received invalid data from Dialogflow: %s", data)
-            return self.json_message(
-                "Expected result value not received", HTTP_BAD_REQUEST)
-
-        action_incomplete = req['actionIncomplete']
-
-        if action_incomplete:
-            return None
-
-        action = req.get('action')
-        parameters = req.get('parameters')
-        dialogflow_response = DialogflowResponse(parameters)
-
-        if action == "":
-            _LOGGER.warning("Received intent with empty action")
-            dialogflow_response.add_speech(
-                "You have not defined an action in your Dialogflow intent.")
-            return self.json(dialogflow_response)
+        _LOGGER.debug("Received Dialogflow request: %s", message)

        try:
-            intent_response = yield from intent.async_handle(
-                hass, DOMAIN, action,
-                {key: {'value': value} for key, value
-                 in parameters.items()})
+            response = yield from async_handle_message(hass, message)
+            return b'' if response is None else self.json(response)
+
+        except DialogFlowError as err:
+            _LOGGER.warning(str(err))
+            return self.json(dialogflow_error_response(
+                hass, message, str(err)))

        except intent.UnknownIntent as err:
-            _LOGGER.warning("Received unknown intent %s", action)
-            dialogflow_response.add_speech(
-                "This intent is not yet configured within Home Assistant.")
-            return self.json(dialogflow_response)
+            _LOGGER.warning(str(err))
+            return self.json(dialogflow_error_response(
+                hass, message,
+                "This intent is not yet configured within Home Assistant."))

        except intent.InvalidSlotInfo as err:
-            _LOGGER.error("Received invalid slot data: %s", err)
-            return self.json_message('Invalid slot data received',
-                                     HTTP_BAD_REQUEST)
-        except intent.IntentError:
-            _LOGGER.exception("Error handling request for %s", action)
-            return self.json_message('Error handling intent', HTTP_BAD_REQUEST)
+            _LOGGER.warning(str(err))
+            return self.json(dialogflow_error_response(
+                hass, message,
+                "Invalid slot information received for this intent."))

-        if 'plain' in intent_response.speech:
-            dialogflow_response.add_speech(
-                intent_response.speech['plain']['speech'])
+        except intent.IntentError as err:
+            _LOGGER.warning(str(err))
+            return self.json(dialogflow_error_response(
+                hass, message, "Error handling intent."))

-        return self.json(dialogflow_response)
+
+def dialogflow_error_response(hass, message, error):
+    """Return a response saying the error message."""
+    dialogflow_response = DialogflowResponse(message['result']['parameters'])
+    dialogflow_response.add_speech(error)
+    return dialogflow_response.as_dict()
+
+
+@asyncio.coroutine
+def async_handle_message(hass, message):
+    """Handle a DialogFlow message."""
+    req = message.get('result')
+    action_incomplete = req['actionIncomplete']
+
+    if action_incomplete:
+        return None
+
+    action = req.get('action', '')
+    parameters = req.get('parameters')
+    dialogflow_response = DialogflowResponse(parameters)
+
+    if action == "":
+        raise DialogFlowError(
+            "You have not defined an action in your Dialogflow intent.")
+
+    intent_response = yield from intent.async_handle(
+        hass, DOMAIN, action,
+        {key: {'value': value} for key, value
+         in parameters.items()})
+
+    if 'plain' in intent_response.speech:
+        dialogflow_response.add_speech(
+            intent_response.speech['plain']['speech'])
+
+    return dialogflow_response.as_dict()


 class DialogflowResponse(object):
@@ -13,7 +13,7 @@ from homeassistant.const import CONF_ACCESS_TOKEN
 from homeassistant.util import Throttle
 import homeassistant.helpers.config_validation as cv

-REQUIREMENTS = ['python-digitalocean==1.12']
+REQUIREMENTS = ['python-digitalocean==1.13.2']

 _LOGGER = logging.getLogger(__name__)

@@ -44,13 +44,19 @@ CONFIG_SCHEMA = vol.Schema({

 def setup(hass, config):
    """Set up the Digital Ocean component."""
+    import digitalocean
+
    conf = config[DOMAIN]
    access_token = conf.get(CONF_ACCESS_TOKEN)

    digital = DigitalOcean(access_token)

-    if not digital.manager.get_account():
-        _LOGGER.error("No Digital Ocean account found for the given API Token")
+    try:
+        if not digital.manager.get_account():
+            _LOGGER.error("No account found for the given API token")
+            return False
+    except digitalocean.baseapi.DataReadError:
+        _LOGGER.error("API token not valid for authentication")
        return False

    hass.data[DATA_DIGITAL_OCEAN] = digital
@@ -37,6 +37,8 @@ SERVICE_WINK = 'wink'
 SERVICE_XIAOMI_GW = 'xiaomi_gw'
 SERVICE_TELLDUSLIVE = 'tellstick'
 SERVICE_HUE = 'philips_hue'
+SERVICE_DECONZ = 'deconz'
+SERVICE_DAIKIN = 'daikin'

 SERVICE_HANDLERS = {
    SERVICE_HASS_IOS_APP: ('ios', None),
@@ -50,6 +52,7 @@ SERVICE_HANDLERS = {
    SERVICE_XIAOMI_GW: ('xiaomi_aqara', None),
    SERVICE_TELLDUSLIVE: ('tellduslive', None),
    SERVICE_HUE: ('hue', None),
+    SERVICE_DECONZ: ('deconz', None),
    'google_cast': ('media_player', 'cast'),
    'panasonic_viera': ('media_player', 'panasonic_viera'),
    'plex_mediaserver': ('media_player', 'plex'),
@@ -1,40 +1,54 @@
-"""Support for a DoorBird video doorbell."""
+"""
+Support for DoorBird device.

+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/doorbird/
+"""
+import asyncio
 import logging
+
 import voluptuous as vol

 from homeassistant.const import CONF_HOST, CONF_USERNAME, CONF_PASSWORD
+from homeassistant.components.http import HomeAssistantView
 import homeassistant.helpers.config_validation as cv

-REQUIREMENTS = ['DoorBirdPy==0.1.0']
+REQUIREMENTS = ['DoorBirdPy==0.1.2']

 _LOGGER = logging.getLogger(__name__)

 DOMAIN = 'doorbird'

+API_URL = '/api/{}'.format(DOMAIN)
+
+CONF_DOORBELL_EVENTS = 'doorbell_events'
+
 CONFIG_SCHEMA = vol.Schema({
    DOMAIN: vol.Schema({
        vol.Required(CONF_HOST): cv.string,
        vol.Required(CONF_USERNAME): cv.string,
-        vol.Required(CONF_PASSWORD): cv.string
+        vol.Required(CONF_PASSWORD): cv.string,
+        vol.Optional(CONF_DOORBELL_EVENTS): cv.boolean,
    })
 }, extra=vol.ALLOW_EXTRA)

+SENSOR_DOORBELL = 'doorbell'
+

 def setup(hass, config):
    """Set up the DoorBird component."""
+    from doorbirdpy import DoorBird
+
    device_ip = config[DOMAIN].get(CONF_HOST)
    username = config[DOMAIN].get(CONF_USERNAME)
    password = config[DOMAIN].get(CONF_PASSWORD)

-    from doorbirdpy import DoorBird
    device = DoorBird(device_ip, username, password)
    status = device.ready()

    if status[0]:
        _LOGGER.info("Connected to DoorBird at %s as %s", device_ip, username)
        hass.data[DOMAIN] = device
-        return True
    elif status[1] == 401:
        _LOGGER.error("Authorization rejected by DoorBird at %s", device_ip)
        return False
@@ -42,3 +56,31 @@ def setup(hass, config):
        _LOGGER.error("Could not connect to DoorBird at %s: Error %s",
                      device_ip, str(status[1]))
        return False
+
+    if config[DOMAIN].get(CONF_DOORBELL_EVENTS):
+        # Provide an endpoint for the device to call to trigger events
+        hass.http.register_view(DoorbirdRequestView())
+
+        # This will make HA the only service that gets doorbell events
+        url = '{}{}/{}'.format(
+            hass.config.api.base_url, API_URL, SENSOR_DOORBELL)
+        device.reset_notifications()
+        device.subscribe_notification(SENSOR_DOORBELL, url)
+
+    return True
+
+
+class DoorbirdRequestView(HomeAssistantView):
+    """Provide a page for the device to call."""
+
+    url = API_URL
+    name = API_URL[1:].replace('/', ':')
+    extra_urls = [API_URL + '/{sensor}']
+
+    # pylint: disable=no-self-use
+    @asyncio.coroutine
+    def get(self, request, sensor):
+        """Respond to requests from the device."""
+        hass = request.app['hass']
+        hass.bus.async_fire('{}_{}'.format(DOMAIN, sensor))
+        return 'OK'
@@ -6,13 +6,11 @@ https://home-assistant.io/components/eight_sleep/
 """
 import asyncio
 import logging
-import os
 from datetime import timedelta

 import voluptuous as vol

 from homeassistant.core import callback
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (
    CONF_USERNAME, CONF_PASSWORD, CONF_SENSORS, CONF_BINARY_SENSORS,
    ATTR_ENTITY_ID, EVENT_HOMEASSISTANT_STOP)
@@ -159,10 +157,6 @@ def async_setup(hass, config):
            CONF_BINARY_SENSORS: binary_sensors,
        }, config))

-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file,
-        os.path.join(os.path.dirname(__file__), 'services.yaml'))
-
    @asyncio.coroutine
    def async_service_handler(service):
        """Handle eight sleep service calls."""
@@ -183,7 +177,6 @@ def async_setup(hass, config):
    # Register services
    hass.services.async_register(
        DOMAIN, SERVICE_HEAT_SET, async_service_handler,
-        descriptions[DOMAIN].get(SERVICE_HEAT_SET),
        schema=SERVICE_EIGHT_SCHEMA)

    @asyncio.coroutine
@@ -8,12 +8,10 @@ import asyncio
 from datetime import timedelta
 import functools as ft
 import logging
-import os

 import voluptuous as vol

 from homeassistant.components import group
-from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (SERVICE_TURN_ON, SERVICE_TOGGLE,
                                 SERVICE_TURN_OFF, ATTR_ENTITY_ID,
                                 STATE_UNKNOWN)
@@ -225,16 +223,10 @@ def async_setup(hass, config: dict):
        if update_tasks:
            yield from asyncio.wait(update_tasks, loop=hass.loop)

-    # Listen for fan service calls.
-    descriptions = yield from hass.async_add_job(
-        load_yaml_config_file, os.path.join(
-            os.path.dirname(__file__), 'services.yaml'))
-
    for service_name in SERVICE_TO_METHOD:
        schema = SERVICE_TO_METHOD[service_name].get('schema')
        hass.services.async_register(
-            DOMAIN, service_name, async_handle_fan_service,
-            descriptions.get(service_name), schema=schema)
+            DOMAIN, service_name, async_handle_fan_service, schema=schema)

    return True

--- a/Show More
+++ b/Show More