Merge pull request #617 from balloob/dev

0.8.0.rc1
Version bump to 0.8.0
2015-11-16 00:03:20 -08:00 · 2015-11-16 00:03:00 -08:00 · 2015-11-16 07:53:31 +01:00 · 2015-11-15 17:30:15 -08:00 · 2015-11-15 20:04:21 -05:00 · 2015-11-15 20:03:45 -05:00
188 changed files with 3152 additions and 1764 deletions
@@ -36,10 +36,12 @@ omit =
    homeassistant/components/device_tracker/aruba.py
    homeassistant/components/device_tracker/asuswrt.py
    homeassistant/components/device_tracker/ddwrt.py
+    homeassistant/components/device_tracker/geofancy.py
    homeassistant/components/device_tracker/luci.py
    homeassistant/components/device_tracker/ubus.py
    homeassistant/components/device_tracker/netgear.py
    homeassistant/components/device_tracker/nmap_tracker.py
+    homeassistant/components/device_tracker/owntracks.py
    homeassistant/components/device_tracker/thomson.py
    homeassistant/components/device_tracker/tomato.py
    homeassistant/components/device_tracker/tplink.py
@@ -48,6 +50,7 @@ omit =
    homeassistant/components/downloader.py
    homeassistant/components/keyboard.py
    homeassistant/components/light/hue.py
+    homeassistant/components/light/mqtt.py
    homeassistant/components/light/limitlessled.py
    homeassistant/components/light/blinksticklight.py
    homeassistant/components/light/hyperion.py
@@ -64,6 +67,7 @@ omit =
    homeassistant/components/notify/instapush.py
    homeassistant/components/notify/nma.py
    homeassistant/components/notify/pushbullet.py
+    homeassistant/components/notify/pushetta.py
    homeassistant/components/notify/pushover.py
    homeassistant/components/notify/slack.py
    homeassistant/components/notify/smtp.py
@@ -80,6 +84,7 @@ omit =
    homeassistant/components/sensor/glances.py
    homeassistant/components/sensor/mysensors.py
    homeassistant/components/sensor/openweathermap.py
+    homeassistant/components/switch/orvibo.py
    homeassistant/components/sensor/rest.py
    homeassistant/components/sensor/rpi_gpio.py
    homeassistant/components/sensor/sabnzbd.py
@@ -97,6 +102,7 @@ omit =
    homeassistant/components/switch/rpi_gpio.py
    homeassistant/components/switch/transmission.py
    homeassistant/components/switch/wemo.py
+    homeassistant/components/thermostat/honeywell.py
    homeassistant/components/thermostat/nest.py
    homeassistant/components/thermostat/radiotherm.py

@@ -17,19 +17,19 @@ For help on building your component, please see the [developer documentation](ht

 After you finish adding support for your device:

- - Update the supported devices in the `README.md` file.
- - Add any new dependencies to `requirements_all.txt`. There is no ordering right now, so just add it to the end.
- - Update the `.coveragerc` file.
- - Provide some documentation for [home-assistant.io](https://home-assistant.io/). The documentation is handled in a separate [git repository](https://github.com/balloob/home-assistant.io). It's OK to add a docstring with configuration details to the file header.
+ - Add a link to the website of your device/service/component in the "examples" listing of the `README.md` file.
+ - Add any new dependencies to `requirements_all.txt` if needed. There is no ordering right now, so just add it to the end of the file.
+ - Update the `.coveragerc` file to exclude your platform if there are no tests available.
+ - Provide some documentation for [home-assistant.io](https://home-assistant.io/). It's OK to just add a docstring with configuration details (sample entry for `configuration.yaml` file and alike) to the file header as a start. Visit the [website documentation](https://home-assistant.io/developers/website/) for further information on contributing to [home-assistant.io](https://github.com/balloob/home-assistant.io).
 - Make sure all your code passes ``pylint`` and ``flake8`` (PEP8 and some more) validation. To check your repository, run `./script/lint`.
 - Create a Pull Request against the [**dev**](https://github.com/balloob/home-assistant/tree/dev) branch of Home Assistant.
 - Check for comments and suggestions on your Pull Request and keep an eye on the [Travis output](https://travis-ci.org/balloob/home-assistant/).

-If you've added a component:
+If you add a platform for an existing component, there is usually no need for updating the frontend. Only if you've added a new component that should show up in the frontend, there are more steps needed:

 - Update the file [`home-assistant-icons.html`](https://github.com/balloob/home-assistant/blob/master/homeassistant/components/frontend/www_static/polymer/resources/home-assistant-icons.html) with an icon for your domain ([pick one from this list](https://www.polymer-project.org/1.0/components/core-elements/demo.html#core-icon)).
- - Update the demo component with two states that it provides
- - Add your component to home-assistant.conf.example
+ - Update the demo component with two states that it provides.
+ - Add your component to `home-assistant.conf.example`.

 Since you've updated `home-assistant-icons.html`, you've made changes to the frontend:

@@ -17,8 +17,7 @@ Check out [the website](https://home-assistant.io) for [a demo][demo], installat
 Examples of devices it can interface it:

 * Monitoring connected devices to a wireless router: [OpenWrt](https://openwrt.org/), [Tomato](http://www.polarcloud.com/tomato), [Netgear](http://netgear.com), [DD-WRT](http://www.dd-wrt.com/site/index), [TPLink](http://www.tp-link.us/), [ASUSWRT](http://event.asus.com/2013/nw/ASUSWRT/) and any SNMP capable Linksys WAP/WRT
- * 
- * [Philips Hue](http://meethue.com) lights, [WeMo](http://www.belkin.com/us/Products/home-automation/c/wemo-home-automation/) switches, [Edimax](http://www.edimax.com/) switches, [Efergy](https://efergy.com) energy monitoring, RFXtrx sensors, and [Tellstick](http://www.telldus.se/products/tellstick) devices and sensors
+ * [Philips Hue](http://meethue.com) lights, [WeMo](http://www.belkin.com/us/Products/home-automation/c/wemo-home-automation/) switches, [Edimax](http://www.edimax.com/) switches, [Efergy](https://efergy.com) energy monitoring, and [Tellstick](http://www.telldus.se/products/tellstick) devices and sensors
 * [Google Chromecasts](http://www.google.com/intl/en/chrome/devices/chromecast), [Music Player Daemon](http://www.musicpd.org/), [Logitech Squeezebox](https://en.wikipedia.org/wiki/Squeezebox_%28network_music_player%29), [Plex](https://plex.tv/), [Kodi (XBMC)](http://kodi.tv/), iTunes (by way of [itunes-api](https://github.com/maddox/itunes-api)), and Amazon Fire TV (by way of [python-firetv](https://github.com/happyleavesaoc/python-firetv))
 * Support for [ISY994](https://www.universal-devices.com/residential/isy994i-series/) (Insteon and X10 devices), [Z-Wave](http://www.z-wave.com/), [Nest Thermostats](https://nest.com/), [RFXtrx](http://www.rfxcom.com/), [Arduino](https://www.arduino.cc/), [Raspberry Pi](https://www.raspberrypi.org/), and [Modbus](http://www.modbus.org/)
 * Interaction with [IFTTT](https://ifttt.com/)
@@ -9,11 +9,12 @@ After bootstrapping you can add your own components or
 start by calling homeassistant.start_home_assistant(bus)
 """

-import os
-import sys
+from collections import defaultdict
 import logging
 import logging.handlers
-from collections import defaultdict
+import os
+import shutil
+import sys

 import homeassistant.core as core
 import homeassistant.util.dt as date_util
@@ -25,7 +26,7 @@ import homeassistant.components as core_components
 import homeassistant.components.group as group
 from homeassistant.helpers.entity import Entity
 from homeassistant.const import (
-    EVENT_COMPONENT_LOADED, CONF_LATITUDE, CONF_LONGITUDE,
+    __version__, EVENT_COMPONENT_LOADED, CONF_LATITUDE, CONF_LONGITUDE,
    CONF_TEMPERATURE_UNIT, CONF_NAME, CONF_TIME_ZONE, CONF_CUSTOMIZE,
    TEMP_CELCIUS, TEMP_FAHRENHEIT)

@@ -34,6 +35,7 @@ _LOGGER = logging.getLogger(__name__)
 ATTR_COMPONENT = 'component'

 PLATFORM_FORMAT = '{}.{}'
+ERROR_LOG_FILENAME = 'home-assistant.log'


 def setup_component(hass, domain, config=None):
@@ -167,6 +169,7 @@ def from_config_dict(config, hass=None, config_dir=None, enable_log=True,
            hass.config.config_dir = config_dir
            mount_local_lib_path(config_dir)

+    process_ha_config_upgrade(hass)
    process_ha_core_config(hass, config.get(core.DOMAIN, {}))

    if enable_log:
@@ -252,7 +255,7 @@ def enable_logging(hass, verbose=False, daemon=False, log_rotate_days=None):
                "Colorlog package not found, console coloring disabled")

    # Log errors to a file if we have write access to file or config dir
-    err_log_path = hass.config.path('home-assistant.log')
+    err_log_path = hass.config.path(ERROR_LOG_FILENAME)
    err_path_exists = os.path.isfile(err_log_path)

    # Check if we can write to the error log if it exists or that
@@ -280,6 +283,31 @@ def enable_logging(hass, verbose=False, daemon=False, log_rotate_days=None):
            'Unable to setup error log %s (access denied)', err_log_path)


+def process_ha_config_upgrade(hass):
+    """ Upgrade config if necessary. """
+    version_path = hass.config.path('.HA_VERSION')
+
+    try:
+        with open(version_path, 'rt') as inp:
+            conf_version = inp.readline().strip()
+    except FileNotFoundError:
+        # Last version to not have this file
+        conf_version = '0.7.7'
+
+    if conf_version == __version__:
+        return
+
+    _LOGGER.info('Upgrading config directory from %s to %s', conf_version,
+                 __version__)
+
+    lib_path = hass.config.path('lib')
+    if os.path.isdir(lib_path):
+        shutil.rmtree(lib_path)
+
+    with open(version_path, 'wt') as outp:
+        outp.write(__version__)
+
+
 def process_ha_core_config(hass, config):
    """ Processes the [homeassistant] section from the config. """
    hac = hass.config
@@ -1,7 +1,6 @@
 """
 homeassistant.components
 ~~~~~~~~~~~~~~~~~~~~~~~~
-
 This package contains components that can be plugged into Home Assistant.

 Component design guidelines:
@@ -12,7 +11,6 @@ Each component that tracks states should create state entity names in the
 format "<DOMAIN>.<OBJECT_ID>".

 Each component should publish services only under its own domain.
-
 """
 import itertools as it
 import logging
@@ -4,7 +4,7 @@ homeassistant.components.alarm_control_panel.manual
 Support for manual alarms.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/alarm_control_panel.manual.html
+https://home-assistant.io/components/alarm_control_panel.manual/
 """
 import logging
 import datetime
@@ -4,7 +4,7 @@ homeassistant.components.alarm_control_panel.mqtt
 This platform enables the possibility to control a MQTT alarm.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/alarm_control_panel.mqtt.html
+https://home-assistant.io/components/alarm_control_panel.mqtt/
 """
 import logging
 import homeassistant.components.mqtt as mqtt
@@ -2,6 +2,9 @@
 homeassistant.components.alarm_control_panel.verisure
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Interfaces with Verisure alarm control panel.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/verisure/
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.api
 Provides a Rest API for Home Assistant.

 For more details about the RESTful API, please refer to the documentation at
-https://home-assistant.io/developers/api.html
+https://home-assistant.io/developers/api/
 """
 import re
 import logging
@@ -14,13 +14,14 @@ import json
 import homeassistant.core as ha
 from homeassistant.helpers.state import TrackStates
 import homeassistant.remote as rem
+from homeassistant.bootstrap import ERROR_LOG_FILENAME
 from homeassistant.const import (
    URL_API, URL_API_STATES, URL_API_EVENTS, URL_API_SERVICES, URL_API_STREAM,
    URL_API_EVENT_FORWARD, URL_API_STATES_ENTITY, URL_API_COMPONENTS,
-    URL_API_CONFIG, URL_API_BOOTSTRAP,
+    URL_API_CONFIG, URL_API_BOOTSTRAP, URL_API_ERROR_LOG,
    EVENT_TIME_CHANGED, EVENT_HOMEASSISTANT_STOP, MATCH_ALL,
    HTTP_OK, HTTP_CREATED, HTTP_BAD_REQUEST, HTTP_NOT_FOUND,
-    HTTP_UNPROCESSABLE_ENTITY)
+    HTTP_UNPROCESSABLE_ENTITY, CONTENT_TYPE_TEXT_PLAIN)


 DOMAIN = 'api'
@@ -89,6 +90,9 @@ def setup(hass, config):
    hass.http.register_path(
        'GET', URL_API_COMPONENTS, _handle_get_api_components)

+    hass.http.register_path('GET', URL_API_ERROR_LOG,
+                            _handle_get_api_error_log)
+
    return True


@@ -341,6 +345,13 @@ def _handle_get_api_components(handler, path_match, data):
    handler.write_json(handler.server.hass.config.components)


+def _handle_get_api_error_log(handler, path_match, data):
+    """ Returns the logged errors for this session. """
+    error_path = handler.server.hass.config.path(ERROR_LOG_FILENAME)
+    with open(error_path, 'rb') as error_log:
+        handler.write_file_pointer(CONTENT_TYPE_TEXT_PLAIN, error_log)
+
+
 def _services_json(hass):
    """ Generate services data to JSONify. """
    return [{"domain": key, "services": value}
@@ -5,7 +5,7 @@ Arduino component that connects to a directly attached Arduino board which
 runs with the Firmata firmware.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/arduino.html
+https://home-assistant.io/components/arduino/
 """
 import logging

@@ -1,8 +1,10 @@
 """
 homeassistant.components.automation
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Allows to setup simple automation rules via the config file.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/automation/
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.automation.event
 Offers event listening automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#event-trigger
+at https://home-assistant.io/components/automation/#event-trigger
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.automation.mqtt
 Offers MQTT listening automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#mqtt-trigger
+at https://home-assistant.io/components/automation/#mqtt-trigger
 """
 import logging

@@ -1,10 +1,10 @@
 """
 homeassistant.components.automation.numeric_state
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Offers numeric state listening automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#numeric-state-trigger
+at https://home-assistant.io/components/automation/#numeric-state-trigger
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.automation.state
 Offers state listening automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#state-trigger
+at https://home-assistant.io/components/automation/#state-trigger
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.automation.sun
 Offers sun based automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#sun-trigger
+at https://home-assistant.io/components/automation/#sun-trigger
 """
 import logging
 from datetime import timedelta
@@ -4,7 +4,7 @@ homeassistant.components.automation.time
 Offers time listening automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#time-trigger
+at https://home-assistant.io/components/automation/#time-trigger
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.automation.zone
 Offers zone automation rules.

 For more details about this automation rule, please refer to the documentation
-at https://home-assistant.io/components/automation.html#zone-trigger
+at https://home-assistant.io/components/automation/#zone-trigger
 """
 import logging

@@ -1,8 +1,10 @@
 """
 homeassistant.components.browser
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Provides functionality to launch a webbrowser on the host machine.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/browser/
 """

 DOMAIN = "browser"
@@ -4,24 +4,8 @@ homeassistant.components.camera
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Component to interface with various cameras.

-The following features are supported:
- - Returning recorded camera images and streams
- - Proxying image requests via HA for external access
- - Converting a still image url into a live video stream
-
-Upcoming features
- - Recording
- - Snapshot
- - Motion Detection Recording(for supported cameras)
- - Automatic Configuration(for supported cameras)
- - Creation of child entities for supported functions
- - Collating motion event images passed via FTP into time based events
- - A service for calling camera functions
- - Camera movement(panning)
- - Zoom
- - Light/Nightvision toggling
- - Support for more devices
- - Expanded documentation
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/camera/
 """
 import requests
 import logging
@@ -103,7 +87,10 @@ def setup(hass, config):

        if camera:
            response = camera.camera_image()
-            handler.wfile.write(response)
+            if response is not None:
+                handler.wfile.write(response)
+            else:
+                handler.send_response(HTTP_NOT_FOUND)
        else:
            handler.send_response(HTTP_NOT_FOUND)

@@ -145,7 +132,8 @@ def setup(hass, config):
            while True:

                img_bytes = camera.camera_image()
-
+                if img_bytes is None:
+                    continue
                headers_str = '\r\n'.join((
                    'Content-length: {}'.format(len(img_bytes)),
                    'Content-type: image/jpeg',
@@ -4,14 +4,13 @@ homeassistant.components.camera.foscam
 This component provides basic support for Foscam IP cameras.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/camera.foscam.html
+https://home-assistant.io/components/camera.foscam/
 """
 import logging
 from homeassistant.helpers import validate_config
 from homeassistant.components.camera import DOMAIN
 from homeassistant.components.camera import Camera
 import requests
-import re

 _LOGGER = logging.getLogger(__name__)

@@ -40,7 +39,7 @@ class FoscamCamera(Camera):
        self._username = device_info.get('username')
        self._password = device_info.get('password')
        self._snap_picture_url = self._base_url \
-            + 'cgi-bin/CGIProxy.fcgi?cmd=snapPicture&usr=' \
+            + 'cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=' \
            + self._username + '&pwd=' + self._password
        self._name = device_info.get('name', 'Foscam Camera')

@@ -50,17 +49,9 @@ class FoscamCamera(Camera):
    def camera_image(self):
        """ Return a still image reponse from the camera. """

-        # send the request to snap a picture
+        # Send the request to snap a picture and return raw jpg data
        response = requests.get(self._snap_picture_url)

-        # parse the response to find the image file name
-
-        pattern = re.compile('src="[.][.]/(.*[.]jpg)"')
-        filename = pattern.search(response.content.decode("utf-8")).group(1)
-
-        # send request for the image
-        response = requests.get(self._base_url + filename)
-
        return response.content

    @property
@@ -4,7 +4,7 @@ homeassistant.components.camera.generic
 Support for IP Cameras.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/camera.generic.html
+https://home-assistant.io/components/camera.generic/
 """
 import logging
 from requests.auth import HTTPBasicAuth
@@ -42,11 +42,19 @@ class GenericCamera(Camera):
    def camera_image(self):
        """ Return a still image reponse from the camera. """
        if self._username and self._password:
-            response = requests.get(
-                self._still_image_url,
-                auth=HTTPBasicAuth(self._username, self._password))
+            try:
+                response = requests.get(
+                    self._still_image_url,
+                    auth=HTTPBasicAuth(self._username, self._password))
+            except requests.exceptions.RequestException as error:
+                _LOGGER.error('Error getting camera image: %s', error)
+                return None
        else:
-            response = requests.get(self._still_image_url)
+            try:
+                response = requests.get(self._still_image_url)
+            except requests.exceptions.RequestException as error:
+                _LOGGER.error('Error getting camera image: %s', error)
+                return None

        return response.content

@@ -0,0 +1,71 @@
+"""
+homeassistant.components.camera.mjpeg
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Support for IP Cameras.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/camera.mjpeg/
+"""
+import logging
+from requests.auth import HTTPBasicAuth
+from homeassistant.helpers import validate_config
+from homeassistant.components.camera import DOMAIN
+from homeassistant.components.camera import Camera
+import requests
+from contextlib import closing
+
+_LOGGER = logging.getLogger(__name__)
+
+
+# pylint: disable=unused-argument
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """ Adds a mjpeg IP Camera. """
+    if not validate_config({DOMAIN: config}, {DOMAIN: ['mjpeg_url']},
+                           _LOGGER):
+        return None
+
+    add_devices_callback([MjpegCamera(config)])
+
+
+# pylint: disable=too-many-instance-attributes
+class MjpegCamera(Camera):
+    """
+    A generic implementation of an IP camera that is reachable over a URL.
+    """
+
+    def __init__(self, device_info):
+        super().__init__()
+        self._name = device_info.get('name', 'Mjpeg Camera')
+        self._username = device_info.get('username')
+        self._password = device_info.get('password')
+        self._mjpeg_url = device_info['mjpeg_url']
+
+    def camera_image(self):
+        """ Return a still image response from the camera. """
+
+        def process_response(response):
+            """ Take in a response object, return the jpg from it. """
+            data = b''
+            for chunk in response.iter_content(1024):
+                data += chunk
+                jpg_start = data.find(b'\xff\xd8')
+                jpg_end = data.find(b'\xff\xd9')
+                if jpg_start != -1 and jpg_end != -1:
+                    jpg = data[jpg_start:jpg_end + 2]
+                    return jpg
+
+        if self._username and self._password:
+            with closing(requests.get(self._mjpeg_url,
+                                      auth=HTTPBasicAuth(self._username,
+                                                         self._password),
+                                      stream=True)) as response:
+                return process_response(response)
+        else:
+            with closing(requests.get(self._mjpeg_url,
+                                      stream=True)) as response:
+                return process_response(response)
+
+    @property
+    def name(self):
+        """ Return the name of this device. """
+        return self._name
@@ -4,7 +4,7 @@ homeassistant.components.conversation
 Provides functionality to have conversations with Home Assistant.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/conversation.html
+https://home-assistant.io/components/conversation/
 """
 import logging
 import re
@@ -10,14 +10,15 @@ import homeassistant.core as ha
 import homeassistant.bootstrap as bootstrap
 import homeassistant.loader as loader
 from homeassistant.const import (
-    CONF_PLATFORM, ATTR_ENTITY_PICTURE, ATTR_ENTITY_ID, ATTR_FRIENDLY_NAME)
+    CONF_PLATFORM, ATTR_ENTITY_ID)

 DOMAIN = "demo"

-DEPENDENCIES = ['introduction', 'conversation']
+DEPENDENCIES = ['conversation', 'introduction', 'zone']

 COMPONENTS_WITH_DEMO_PLATFORM = [
-    'switch', 'light', 'sensor', 'thermostat', 'media_player', 'notify']
+    'device_tracker', 'light', 'media_player', 'notify', 'switch', 'sensor',
+    'thermostat']


 def setup(hass, config):
@@ -110,25 +111,6 @@ def setup(hass, config):
             }},
            ]})

-    # Setup fake device tracker
-    hass.states.set("device_tracker.paulus", "home",
-                    {ATTR_ENTITY_PICTURE:
-                     "http://graph.facebook.com/297400035/picture",
-                     ATTR_FRIENDLY_NAME: 'Paulus'})
-    hass.states.set("device_tracker.anne_therese", "not_home",
-                    {ATTR_FRIENDLY_NAME: 'Anne Therese',
-                     'latitude': hass.config.latitude + 0.002,
-                     'longitude': hass.config.longitude + 0.002})
-
-    hass.states.set("group.all_devices", "home",
-                    {
-                        "auto": True,
-                        ATTR_ENTITY_ID: [
-                            "device_tracker.paulus",
-                            "device_tracker.anne_therese"
-                        ]
-                    })
-
    # Setup configurator
    configurator_ids = []

@@ -1,9 +1,11 @@
 """
 homeassistant.components.device_sun_light_trigger
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Provides functionality to turn on lights based on the state of the sun and
+devices.

-Provides functionality to turn on lights based on
-the state of the sun and devices.
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/device_sun_light_trigger/
 """
 import logging
 from datetime import timedelta
@@ -1,25 +1,10 @@
 """
 homeassistant.components.device_tracker
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Provides functionality to keep track of devices.

-device_tracker:
-  platform: netgear
-
-  # Optional
-
-  # How many seconds to wait after not seeing device to consider it not home
-  consider_home: 180
-
-  # Seconds between each scan
-  interval_seconds: 12
-
-  # New found devices auto found
-  track_new_devices: yes
-
-  # Maximum distance from home we consider people home
-  range_home: 100
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/device_tracker/
 """
 # pylint: disable=too-many-instance-attributes, too-many-arguments
 # pylint: disable=too-many-locals
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning an Actiontec MI424WR
 (Verizon FIOS) router for device presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.actiontec.html
+https://home-assistant.io/components/device_tracker.actiontec/
 """
 import logging
 from datetime import timedelta
@@ -17,20 +17,19 @@ import telnetlib
 import homeassistant.util.dt as dt_util
 from homeassistant.const import CONF_HOST, CONF_USERNAME, CONF_PASSWORD
 from homeassistant.helpers import validate_config
-from homeassistant.util import Throttle, convert
+from homeassistant.util import Throttle
 from homeassistant.components.device_tracker import DOMAIN

 # Return cached results if last scan was less then this time ago
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=5)

-# Interval in minutes to exclude devices from a scan while they are home
-CONF_HOME_INTERVAL = "home_interval"
-
 _LOGGER = logging.getLogger(__name__)

 _LEASES_REGEX = re.compile(
    r'(?P<ip>([0-9]{1,3}[\.]){3}[0-9]{1,3})' +
-    r'\smac:\s(?P<mac>([0-9a-f]{2}[:-]){5}([0-9a-f]{2}))')
+    r'\smac:\s(?P<mac>([0-9a-f]{2}[:-]){5}([0-9a-f]{2}))' +
+    r'\svalid\sfor:\s(?P<timevalid>(-?\d+))' +
+    r'\ssec')


 # pylint: disable=unused-argument
@@ -40,9 +39,7 @@ def get_scanner(hass, config):
                           {DOMAIN: [CONF_HOST, CONF_USERNAME, CONF_PASSWORD]},
                           _LOGGER):
        return None
-
    scanner = ActiontecDeviceScanner(config[DOMAIN])
-
    return scanner if scanner.success_init else None

 Device = namedtuple("Device", ["mac", "ip", "last_update"])
@@ -58,19 +55,11 @@ class ActiontecDeviceScanner(object):
        self.host = config[CONF_HOST]
        self.username = config[CONF_USERNAME]
        self.password = config[CONF_PASSWORD]
-        minutes = convert(config.get(CONF_HOME_INTERVAL), int, 0)
-        self.home_interval = timedelta(minutes=minutes)
-
        self.lock = threading.Lock()
-
        self.last_results = []
-
-        # Test the router is accessible
        data = self.get_actiontec_data()
        self.success_init = data is not None
        _LOGGER.info("actiontec scanner initialized")
-        if self.home_interval:
-            _LOGGER.info("home_interval set to: %s", self.home_interval)

    def scan_devices(self):
        """
@@ -100,27 +89,13 @@ class ActiontecDeviceScanner(object):
            return False

        with self.lock:
-            exclude_targets = set()
-            exclude_target_list = []
            now = dt_util.now()
-            if self.home_interval:
-                for host in self.last_results:
-                    if host.last_update + self.home_interval > now:
-                        exclude_targets.add(host)
-                if len(exclude_targets) > 0:
-                    exclude_target_list = [t.ip for t in exclude_targets]
-
            actiontec_data = self.get_actiontec_data()
            if not actiontec_data:
                return False
-            self.last_results = []
-            for client in exclude_target_list:
-                if client in actiontec_data:
-                    actiontec_data.pop(client)
-            for name, data in actiontec_data.items():
-                device = Device(data['mac'], name, now)
-                self.last_results.append(device)
-            self.last_results.extend(exclude_targets)
+            self.last_results = [Device(data['mac'], name, now)
+                                 for name, data in actiontec_data.items()
+                                 if data['timevalid'] > -60]
            _LOGGER.info("actiontec scan successful")
            return True

@@ -153,6 +128,7 @@ class ActiontecDeviceScanner(object):
            if match is not None:
                devices[match.group('ip')] = {
                    'ip': match.group('ip'),
-                    'mac': match.group('mac').upper()
+                    'mac': match.group('mac').upper(),
+                    'timevalid': int(match.group('timevalid'))
                    }
        return devices
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a Aruba Access Point for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.aruba.html
+https://home-assistant.io/components/device_tracker.aruba/
 """
 import logging
 from datetime import timedelta
@@ -4,32 +4,8 @@ homeassistant.components.device_tracker.asuswrt
 Device tracker platform that supports scanning a ASUSWRT router for device
 presence.

-This device tracker needs telnet to be enabled on the router.
-
-Configuration:
-
-To use the ASUSWRT tracker you will need to add something like the following
-to your configuration.yaml file.
-
-device_tracker:
-  platform: asuswrt
-  host: YOUR_ROUTER_IP
-  username: YOUR_ADMIN_USERNAME
-  password: YOUR_ADMIN_PASSWORD
-
-Variables:
-
-host
-*Required
-The IP address of your router, e.g. 192.168.1.1.
-
-username
-*Required
-The username of an user with administrative privileges, usually 'admin'.
-
-password
-*Required
-The password for your given admin account.
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/device_tracker.asuswrt/
 """
 import logging
 from datetime import timedelta
@@ -158,13 +134,16 @@ class AsusWrtDeviceScanner(object):
        for lease in leases_result:
            match = _LEASES_REGEX.search(lease.decode('utf-8'))

+            if not match:
+                _LOGGER.warning("Could not parse lease row: %s", lease)
+                continue
+
            # For leases where the client doesn't set a hostname, ensure
            # it is blank and not '*', which breaks the entity_id down
            # the line
-            if match:
-                host = match.group('host')
-                if host == '*':
-                    host = ''
+            host = match.group('host')
+            if host == '*':
+                host = ''

            devices[match.group('ip')] = {
                'host': host,
@@ -175,6 +154,9 @@ class AsusWrtDeviceScanner(object):

        for neighbor in neighbors:
            match = _IP_NEIGH_REGEX.search(neighbor.decode('utf-8'))
-            if match and match.group('ip') in devices:
+            if not match:
+                _LOGGER.warning("Could not parse neighbor row: %s", neighbor)
+                continue
+            if match.group('ip') in devices:
                devices[match.group('ip')]['status'] = match.group('status')
        return devices
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a DD-WRT router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.ddwrt.html
+https://home-assistant.io/components/device_tracker.ddwrt/
 """
 import logging
 from datetime import timedelta
@@ -1,7 +1,6 @@
 """
 homeassistant.components.device_tracker.demo
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Demo platform for the device tracker.

 device_tracker:
@@ -4,9 +4,8 @@ homeassistant.components.device_tracker.geofancy
 Geofancy platform for the device tracker.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.geofancy.html
+https://home-assistant.io/components/device_tracker.geofancy/
 """
-
 from homeassistant.const import (
    HTTP_UNPROCESSABLE_ENTITY, HTTP_INTERNAL_SERVER_ERROR)

@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a OpenWRT router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.luci.html
+https://home-assistant.io/components/device_tracker.luci/
 """
 import logging
 import json
@@ -4,7 +4,7 @@ homeassistant.components.device_tracker.mqtt
 MQTT platform for the device tracker.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.mqtt.html
+https://home-assistant.io/components/device_tracker.mqtt/
 """
 import logging
 from homeassistant import util
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a Netgear router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.netgear.html
+https://home-assistant.io/components/device_tracker.netgear/
 """
 import logging
 from datetime import timedelta
@@ -4,7 +4,7 @@ homeassistant.components.device_tracker.nmap
 Device tracker platform that supports scanning a network with nmap.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.nmap_scanner.html
+https://home-assistant.io/components/device_tracker.nmap_scanner/
 """
 import logging
 from datetime import timedelta
@@ -4,7 +4,7 @@ homeassistant.components.device_tracker.owntracks
 OwnTracks platform for the device tracker.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.owntracks.html
+https://home-assistant.io/components/device_tracker.owntracks/
 """
 import json
 import logging
@@ -5,7 +5,7 @@ Device tracker platform that supports fetching WiFi associations
 through SNMP.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.snmp.html
+https://home-assistant.io/components/device_tracker.snmp/
 """
 import logging
 from datetime import timedelta
@@ -45,9 +45,12 @@ class SnmpScanner(object):
    This class queries any SNMP capable Acces Point for connected devices.
    """
    def __init__(self, config):
-        self.host = config[CONF_HOST]
-        self.community = config[CONF_COMMUNITY]
-        self.baseoid = config[CONF_BASEOID]
+        from pysnmp.entity.rfc3413.oneliner import cmdgen
+        self.snmp = cmdgen.CommandGenerator()
+
+        self.host = cmdgen.UdpTransportTarget((config[CONF_HOST], 161))
+        self.community = cmdgen.CommunityData(config[CONF_COMMUNITY])
+        self.baseoid = cmdgen.MibVariable(config[CONF_BASEOID])

        self.lock = threading.Lock()

@@ -91,16 +94,11 @@ class SnmpScanner(object):

    def get_snmp_data(self):
        """ Fetch mac addresses from WAP via SNMP. """
-        from pysnmp.entity.rfc3413.oneliner import cmdgen

        devices = []

-        snmp = cmdgen.CommandGenerator()
-        errindication, errstatus, errindex, restable = snmp.nextCmd(
-            cmdgen.CommunityData(self.community),
-            cmdgen.UdpTransportTarget((self.host, 161)),
-            cmdgen.MibVariable(self.baseoid)
-        )
+        errindication, errstatus, errindex, restable = self.snmp.nextCmd(
+            self.community, self.host, self.baseoid)

        if errindication:
            _LOGGER.error("SNMPLIB error: %s", errindication)
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a THOMSON router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.thomson.html
+https://home-assistant.io/components/device_tracker.thomson/
 """
 import logging
 from datetime import timedelta
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a Tomato router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.tomato.html
+https://home-assistant.io/components/device_tracker.tomato/
 """
 import logging
 import json
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a TP-Link router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.tplink.html
+https://home-assistant.io/components/device_tracker.tplink/
 """
 import base64
 import logging
@@ -5,7 +5,7 @@ Device tracker platform that supports scanning a OpenWRT router for device
 presence.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/device_tracker.ubus.html
+https://home-assistant.io/components/device_tracker.ubus/
 """
 import logging
 import json
@@ -1,7 +1,6 @@
 """
 homeassistant.components.discovery
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Starts a service to scan in intervals for new devices.

 Will emit EVENT_PLATFORM_DISCOVERED whenever a new service has been discovered.
@@ -4,7 +4,7 @@ homeassistant.components.downloader
 Provides functionality to download files.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/downloader.html
+https://home-assistant.io/components/downloader/
 """
 import os
 import logging
@@ -8,7 +8,7 @@ import re
 import os
 import logging

-from . import version
+from . import version, mdi_version
 import homeassistant.util as util
 from homeassistant.const import URL_ROOT, HTTP_OK
 from homeassistant.config import get_default_config_dir
@@ -22,9 +22,11 @@ _LOGGER = logging.getLogger(__name__)

 FRONTEND_URLS = [
    URL_ROOT, '/logbook', '/history', '/map', '/devService', '/devState',
-    '/devEvent']
+    '/devEvent', '/devInfo']
 STATES_URL = re.compile(r'/states(/([a-zA-Z\._\-0-9/]+)|)')

+_FINGERPRINT = re.compile(r'^(\w+)-[a-z0-9]{32}\.(\w+)$', re.IGNORECASE)
+

 def setup(hass, config):
    """ Setup serving the frontend. """
@@ -72,6 +74,7 @@ def _handle_get_root(handler, path_match, data):

    template_html = template_html.replace('{{ app_url }}', app_url)
    template_html = template_html.replace('{{ auth }}', auth)
+    template_html = template_html.replace('{{ icons }}', mdi_version.VERSION)

    handler.wfile.write(template_html.encode("UTF-8"))

@@ -80,9 +83,10 @@ def _handle_get_static(handler, path_match, data):
    """ Returns a static file for the frontend. """
    req_file = util.sanitize_path(path_match.group('file'))

-    # Strip md5 hash out of frontend filename
-    if re.match(r'^frontend-[A-Za-z0-9]{32}\.html$', req_file):
-        req_file = "frontend.html"
+    # Strip md5 hash out
+    fingerprinted = _FINGERPRINT.match(req_file)
+    if fingerprinted:
+        req_file = "{}.{}".format(*fingerprinted.groups())

    path = os.path.join(os.path.dirname(__file__), 'www_static', req_file)

@@ -46,6 +46,6 @@
    </div>
    <script src='/static/webcomponents-lite.min.js'></script>
    <link rel='import' href='/static/{{ app_url }}' />
-    <home-assistant auth='{{ auth }}'></home-assistant>
+    <home-assistant auth='{{ auth }}' icons='{{ icons }}'></home-assistant>
  </body>
 </html>
@@ -0,0 +1,2 @@
+""" DO NOT MODIFY. Auto-generated by update_mdi script """
+VERSION = "38EF63D0474411E4B3CF842B2B6CFE1B"
@@ -1,2 +1,2 @@
 """ DO NOT MODIFY. Auto-generated by build_frontend script """
-VERSION = "beb922c55bb26ea576581b453f6d7c04"
+VERSION = "b75e3c9ebd3de2dae0912a89499127a9"
@@ -4,7 +4,7 @@ homeassistant.components.group
 Provides functionality to group devices that can be turned on or off.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/group.html
+https://home-assistant.io/components/group/
 """
 import homeassistant.core as ha
 from homeassistant.helpers import generate_entity_id
@@ -4,7 +4,7 @@ homeassistant.components.history
 Provide pre-made queries on top of the recorder component.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/history.html
+https://home-assistant.io/components/history/
 """
 import re
 from datetime import timedelta
@@ -4,7 +4,7 @@ homeassistant.components.http
 This module provides an API and a HTTP interface for debug purposes.

 For more details about the RESTful API, please refer to the documentation at
-https://home-assistant.io/developers/api.html
+https://home-assistant.io/developers/api/
 """
 import json
 import threading
@@ -4,7 +4,7 @@ homeassistant.components.ifttt
 This component enable you to trigger Maker IFTTT recipes.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/ifttt.html
+https://home-assistant.io/components/ifttt/
 """
 import logging
 import requests
@@ -4,7 +4,7 @@ homeassistant.components.introduction
 Component that will help guide the user taking its first steps.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/introduction.html
+https://home-assistant.io/components/introduction/
 """
 import logging

@@ -26,13 +26,13 @@ def setup(hass, config=None):
        Here are some resources to get started:

         - Configuring Home Assistant:
-           https://home-assistant.io/getting-started/configuration.html
+           https://home-assistant.io/getting-started/configuration/

         - Available components:
           https://home-assistant.io/components/

         - Troubleshooting your configuration:
-           https://home-assistant.io/getting-started/troubleshooting-configuration.html
+           https://home-assistant.io/getting-started/troubleshooting-configuration/

         - Getting help:
           https://home-assistant.io/help/
@@ -5,7 +5,7 @@ Connects to an ISY-994 controller and loads relevant components to control its
 devices. Also contains the base classes for ISY Sensors, Lights, and Switches.

 For configuration details please visit the documentation for this component at
-https://home-assistant.io/components/isy994.html
+https://home-assistant.io/components/isy994/
 """
 import logging
 from urllib.parse import urlparse
@@ -4,7 +4,7 @@ homeassistant.components.keyboard
 Provides functionality to emulate keyboard presses on host machine.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/keyboard.html
+https://home-assistant.io/components/keyboard/
 """
 import logging

@@ -1,58 +1,16 @@
 """
 homeassistant.components.light
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Provides functionality to interact with lights.

-It offers the following services:
-
-TURN_OFF - Turns one or multiple lights off.
-
-Supports following parameters:
- - transition
-   Integer that represents the time the light should take to transition to
-   the new state.
- - entity_id
-   String or list of strings that point at entity_ids of lights.
-
-TURN_ON - Turns one or multiple lights on and change attributes.
-
-Supports following parameters:
- - transition
-   Integer that represents the time the light should take to transition to
-   the new state.
-
- - entity_id
-   String or list of strings that point at entity_ids of lights.
-
- - profile
-   String with the name of one of the built-in profiles (relax, energize,
-   concentrate, reading) or one of the custom profiles defined in
-   light_profiles.csv in the current working directory.
-
-   Light profiles define a xy color and a brightness.
-
-   If a profile is given and a brightness or xy color then the profile values
-   will be overwritten.
-
- - xy_color
-   A list containing two floats representing the xy color you want the light
-   to be.
-
- - rgb_color
-   A list containing three integers representing the xy color you want the
-   light to be.
-
- - brightness
-   Integer between 0 and 255 representing how bright you want the light to be.
-
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/light/
 """
-
 import logging
 import os
 import csv

-from homeassistant.components import group, discovery, wink, isy994
+from homeassistant.components import group, discovery, wink, isy994, zwave
 from homeassistant.config import load_yaml_config_file
 from homeassistant.const import (
    STATE_ON, SERVICE_TURN_ON, SERVICE_TURN_OFF, ATTR_ENTITY_ID)
@@ -77,6 +35,7 @@ ATTR_TRANSITION = "transition"
 # lists holding color values
 ATTR_RGB_COLOR = "rgb_color"
 ATTR_XY_COLOR = "xy_color"
+ATTR_COLOR_TEMP = "color_temp"

 # int with value 0 .. 255 representing brightness of the light
 ATTR_BRIGHTNESS = "brightness"
@@ -92,6 +51,7 @@ FLASH_LONG = "long"
 # Apply an effect to the light, can be EFFECT_COLORLOOP
 ATTR_EFFECT = "effect"
 EFFECT_COLORLOOP = "colorloop"
+EFFECT_WHITE = "white"

 LIGHT_PROFILES_FILE = "light_profiles.csv"

@@ -100,11 +60,14 @@ DISCOVERY_PLATFORMS = {
    wink.DISCOVER_LIGHTS: 'wink',
    isy994.DISCOVER_LIGHTS: 'isy994',
    discovery.SERVICE_HUE: 'hue',
+    zwave.DISCOVER_LIGHTS: 'zwave',
 }

 PROP_TO_ATTR = {
    'brightness': ATTR_BRIGHTNESS,
-    'color_xy': ATTR_XY_COLOR,
+    'color_temp': ATTR_COLOR_TEMP,
+    'rgb_color': ATTR_RGB_COLOR,
+    'xy_color': ATTR_XY_COLOR,
 }

 _LOGGER = logging.getLogger(__name__)
@@ -119,8 +82,8 @@ def is_on(hass, entity_id=None):

 # pylint: disable=too-many-arguments
 def turn_on(hass, entity_id=None, transition=None, brightness=None,
-            rgb_color=None, xy_color=None, profile=None, flash=None,
-            effect=None):
+            rgb_color=None, xy_color=None, color_temp=None, profile=None,
+            flash=None, effect=None):
    """ Turns all or specified light on. """
    data = {
        key: value for key, value in [
@@ -130,6 +93,7 @@ def turn_on(hass, entity_id=None, transition=None, brightness=None,
            (ATTR_BRIGHTNESS, brightness),
            (ATTR_RGB_COLOR, rgb_color),
            (ATTR_XY_COLOR, xy_color),
+            (ATTR_COLOR_TEMP, color_temp),
            (ATTR_FLASH, flash),
            (ATTR_EFFECT, effect),
        ] if value is not None
@@ -150,7 +114,7 @@ def turn_off(hass, entity_id=None, transition=None):
    hass.services.call(DOMAIN, SERVICE_TURN_OFF, data)


-# pylint: disable=too-many-branches, too-many-locals
+# pylint: disable=too-many-branches, too-many-locals, too-many-statements
 def setup(hass, config):
    """ Exposes light control via statemachine and services. """

@@ -240,6 +204,15 @@ def setup(hass, config):
                # ValueError if value could not be converted to float
                pass

+        if ATTR_COLOR_TEMP in dat:
+            # color_temp should be an int of mirads value
+            colortemp = dat.get(ATTR_COLOR_TEMP)
+
+            # Without this check, a ctcolor with value '99' would work
+            # These values are based on Philips Hue, may need ajustment later
+            if isinstance(colortemp, int) and 154 <= colortemp <= 500:
+                params[ATTR_COLOR_TEMP] = colortemp
+
        if ATTR_RGB_COLOR in dat:
            try:
                # rgb_color should be a list containing 3 ints
@@ -247,26 +220,17 @@ def setup(hass, config):

                if len(rgb_color) == 3:
                    params[ATTR_RGB_COLOR] = [int(val) for val in rgb_color]
-                    params[ATTR_XY_COLOR] = \
-                        color_util.color_RGB_to_xy(int(rgb_color[0]),
-                                                   int(rgb_color[1]),
-                                                   int(rgb_color[2]))

            except (TypeError, ValueError):
                # TypeError if rgb_color is not iterable
                # ValueError if not all values can be converted to int
                pass

-        if ATTR_FLASH in dat:
-            if dat[ATTR_FLASH] == FLASH_SHORT:
-                params[ATTR_FLASH] = FLASH_SHORT
+        if dat.get(ATTR_FLASH) in (FLASH_SHORT, FLASH_LONG):
+            params[ATTR_FLASH] = dat[ATTR_FLASH]

-            elif dat[ATTR_FLASH] == FLASH_LONG:
-                params[ATTR_FLASH] = FLASH_LONG
-
-        if ATTR_EFFECT in dat:
-            if dat[ATTR_EFFECT] == EFFECT_COLORLOOP:
-                params[ATTR_EFFECT] = EFFECT_COLORLOOP
+        if dat.get(ATTR_EFFECT) in (EFFECT_COLORLOOP, EFFECT_WHITE):
+            params[ATTR_EFFECT] = dat[ATTR_EFFECT]

        for light in target_lights:
            light.turn_on(**params)
@@ -297,10 +261,20 @@ class Light(ToggleEntity):
        return None

    @property
-    def color_xy(self):
+    def xy_color(self):
        """ XY color value [float, float]. """
        return None

+    @property
+    def rgb_color(self):
+        """ RGB color value [int, int, int] """
+        return None
+
+    @property
+    def color_temp(self):
+        """ CT color value in mirads. """
+        return None
+
    @property
    def device_state_attributes(self):
        """ Returns device specific state attributes. """
@@ -317,6 +291,12 @@ class Light(ToggleEntity):
                if value:
                    data[attr] = value

+            if ATTR_RGB_COLOR not in data and ATTR_XY_COLOR in data and \
+               ATTR_BRIGHTNESS in data:
+                data[ATTR_RGB_COLOR] = color_util.color_xy_brightness_to_RGB(
+                    data[ATTR_XY_COLOR][0], data[ATTR_XY_COLOR][1],
+                    data[ATTR_BRIGHTNESS])
+
        device_attr = self.device_state_attributes

        if device_attr is not None:
@@ -4,7 +4,7 @@ homeassistant.components.light.blinksticklight
 Support for Blinkstick lights.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/light.blinksticklight.html
+https://home-assistant.io/components/light.blinksticklight/
 """
 import logging

@@ -1,37 +1,40 @@
 """
 homeassistant.components.light.demo
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Demo platform that implements lights.

 """
 import random

 from homeassistant.components.light import (
-    Light, ATTR_BRIGHTNESS, ATTR_XY_COLOR)
+    Light, ATTR_BRIGHTNESS, ATTR_RGB_COLOR, ATTR_COLOR_TEMP)


 LIGHT_COLORS = [
-    [0.368, 0.180],
-    [0.460, 0.470],
+    [237, 224, 33],
+    [255, 63, 111],
 ]

+LIGHT_TEMPS = [240, 380]
+

 def setup_platform(hass, config, add_devices_callback, discovery_info=None):
    """ Find and return demo lights. """
    add_devices_callback([
        DemoLight("Bed Light", False),
-        DemoLight("Ceiling Lights", True, LIGHT_COLORS[0]),
-        DemoLight("Kitchen Lights", True, LIGHT_COLORS[1])
+        DemoLight("Ceiling Lights", True, LIGHT_COLORS[0], LIGHT_TEMPS[1]),
+        DemoLight("Kitchen Lights", True, LIGHT_COLORS[1], LIGHT_TEMPS[0])
    ])


 class DemoLight(Light):
    """ Provides a demo switch. """
-    def __init__(self, name, state, xy=None, brightness=180):
+    # pylint: disable=too-many-arguments
+    def __init__(self, name, state, rgb=None, ct=None, brightness=180):
        self._name = name
        self._state = state
-        self._xy = xy or random.choice(LIGHT_COLORS)
+        self._rgb = rgb or random.choice(LIGHT_COLORS)
+        self._ct = ct or random.choice(LIGHT_TEMPS)
        self._brightness = brightness

    @property
@@ -50,9 +53,14 @@ class DemoLight(Light):
        return self._brightness

    @property
-    def color_xy(self):
-        """ XY color value. """
-        return self._xy
+    def rgb_color(self):
+        """ rgb color value. """
+        return self._rgb
+
+    @property
+    def color_temp(self):
+        """ CT color temperature. """
+        return self._ct

    @property
    def is_on(self):
@@ -63,8 +71,11 @@ class DemoLight(Light):
        """ Turn the device on. """
        self._state = True

-        if ATTR_XY_COLOR in kwargs:
-            self._xy = kwargs[ATTR_XY_COLOR]
+        if ATTR_RGB_COLOR in kwargs:
+            self._rgb = kwargs[ATTR_RGB_COLOR]
+
+        if ATTR_COLOR_TEMP in kwargs:
+            self._ct = kwargs[ATTR_COLOR_TEMP]

        if ATTR_BRIGHTNESS in kwargs:
            self._brightness = kwargs[ATTR_BRIGHTNESS]
@@ -3,20 +3,24 @@ homeassistant.components.light.hue
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Support for Hue lights.

-https://home-assistant.io/components/light.hue.html
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/light.hue/
 """
+import json
 import logging
+import os
 import socket
 from datetime import timedelta
 from urllib.parse import urlparse

 from homeassistant.loader import get_component
 import homeassistant.util as util
+import homeassistant.util.color as color_util
 from homeassistant.const import CONF_HOST, DEVICE_DEFAULT_NAME
 from homeassistant.components.light import (
-    Light, ATTR_BRIGHTNESS, ATTR_XY_COLOR, ATTR_TRANSITION,
-    ATTR_FLASH, FLASH_LONG, FLASH_SHORT, ATTR_EFFECT,
-    EFFECT_COLORLOOP)
+    Light, ATTR_BRIGHTNESS, ATTR_XY_COLOR, ATTR_COLOR_TEMP,
+    ATTR_TRANSITION, ATTR_FLASH, FLASH_LONG, FLASH_SHORT,
+    ATTR_EFFECT, EFFECT_COLORLOOP, ATTR_RGB_COLOR)

 REQUIREMENTS = ['phue==0.8']
 MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
@@ -30,21 +34,37 @@ _CONFIGURING = {}
 _LOGGER = logging.getLogger(__name__)


+def _find_host_from_config(hass):
+    """ Attempt to detect host based on existing configuration. """
+    path = hass.config.path(PHUE_CONFIG_FILE)
+
+    if not os.path.isfile(path):
+        return None
+
+    try:
+        with open(path) as inp:
+            return next(json.loads(''.join(inp)).keys().__iter__())
+    except (ValueError, AttributeError, StopIteration):
+        # ValueError if can't parse as JSON
+        # AttributeError if JSON value is not a dict
+        # StopIteration if no keys
+        return None
+
+
 def setup_platform(hass, config, add_devices_callback, discovery_info=None):
    """ Gets the Hue lights. """
-    try:
-        # pylint: disable=unused-variable
-        import phue  # noqa
-    except ImportError:
-        _LOGGER.exception("Error while importing dependency phue.")
-
-        return
-
    if discovery_info is not None:
        host = urlparse(discovery_info[1]).hostname
    else:
        host = config.get(CONF_HOST, None)

+        if host is None:
+            host = _find_host_from_config(hass)
+
+        if host is None:
+            _LOGGER.error('No host found in configuration')
+            return False
+
    # Only act if we are not already configuring this host
    if host in _CONFIGURING:
        return
@@ -125,6 +145,7 @@ def request_configuration(host, hass, add_devices_callback):

        return

+    # pylint: disable=unused-argument
    def hue_configuration_callback(data):
        """ Actions to do when our configuration callback is called. """
        setup_bridge(host, hass, add_devices_callback)
@@ -164,10 +185,15 @@ class HueLight(Light):
        return self.info['state']['bri']

    @property
-    def color_xy(self):
+    def xy_color(self):
        """ XY color value. """
        return self.info['state'].get('xy')

+    @property
+    def color_temp(self):
+        """ CT color value. """
+        return self.info['state'].get('ct')
+
    @property
    def is_on(self):
        """ True if device is on. """
@@ -189,6 +215,12 @@ class HueLight(Light):

        if ATTR_XY_COLOR in kwargs:
            command['xy'] = kwargs[ATTR_XY_COLOR]
+        elif ATTR_RGB_COLOR in kwargs:
+            command['xy'] = color_util.color_RGB_to_xy(
+                *(int(val) for val in kwargs[ATTR_RGB_COLOR]))
+
+        if ATTR_COLOR_TEMP in kwargs:
+            command['ct'] = kwargs[ATTR_COLOR_TEMP]

        flash = kwargs.get(ATTR_FLASH)

@@ -3,7 +3,8 @@ homeassistant.components.light.hyperion
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Support for Hyperion remotes.

-https://home-assistant.io/components/light.hyperion.html
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/light.hyperion/
 """
 import logging
 import socket
@@ -2,6 +2,9 @@
 homeassistant.components.light.isy994
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Support for ISY994 lights.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/isy994/
 """
 import logging

@@ -1,29 +1,52 @@
 """
 homeassistant.components.light.limitlessled
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Support for LimitlessLED bulbs.

-Support for LimitlessLED bulbs, also known as...
-
- EasyBulb
- AppLight
- AppLamp
- MiLight
- LEDme
- dekolight
- iLight
-
-https://home-assistant.io/components/light.limitlessled.html
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/light.limitlessled/
 """
 import logging

 from homeassistant.const import DEVICE_DEFAULT_NAME
 from homeassistant.components.light import (Light, ATTR_BRIGHTNESS,
-                                            ATTR_XY_COLOR)
-from homeassistant.util.color import color_RGB_to_xy
+                                            ATTR_RGB_COLOR, ATTR_EFFECT,
+                                            EFFECT_COLORLOOP, EFFECT_WHITE)

 _LOGGER = logging.getLogger(__name__)
 REQUIREMENTS = ['ledcontroller==1.1.0']

+COLOR_TABLE = {
+    'white': [0xFF, 0xFF, 0xFF],
+    'violet': [0xEE, 0x82, 0xEE],
+    'royal_blue': [0x41, 0x69, 0xE1],
+    'baby_blue': [0x87, 0xCE, 0xFA],
+    'aqua': [0x00, 0xFF, 0xFF],
+    'royal_mint': [0x7F, 0xFF, 0xD4],
+    'seafoam_green': [0x2E, 0x8B, 0x57],
+    'green': [0x00, 0x80, 0x00],
+    'lime_green': [0x32, 0xCD, 0x32],
+    'yellow': [0xFF, 0xFF, 0x00],
+    'yellow_orange': [0xDA, 0xA5, 0x20],
+    'orange': [0xFF, 0xA5, 0x00],
+    'red': [0xFF, 0x00, 0x00],
+    'pink': [0xFF, 0xC0, 0xCB],
+    'fusia': [0xFF, 0x00, 0xFF],
+    'lilac': [0xDA, 0x70, 0xD6],
+    'lavendar': [0xE6, 0xE6, 0xFA],
+}
+
+
+def _distance_squared(rgb1, rgb2):
+    """ Return sum of squared distances of each color part. """
+    return sum((val1-val2)**2 for val1, val2 in zip(rgb1, rgb2))
+
+
+def _rgb_to_led_color(rgb_color):
+    """ Convert an RGB color to the closest color string and color. """
+    return sorted((_distance_squared(rgb_color, color), name)
+                  for name, color in COLOR_TABLE.items())[0][1]
+

 def setup_platform(hass, config, add_devices_callback, discovery_info=None):
    """ Gets the LimitlessLED lights. """
@@ -105,49 +128,15 @@ class RGBWLimitlessLED(LimitlessLED):
        super().__init__(pool, controller_id, group, name, 'rgbw')

        self._brightness = 100
-        self._xy_color = color_RGB_to_xy(255, 255, 255)
-
-        # Build a color table that maps an RGB color to a color string
-        # recognized by LedController's set_color method
-        self._color_table = [(color_RGB_to_xy(*x[0]), x[1]) for x in [
-            ((0xFF, 0xFF, 0xFF), 'white'),
-            ((0xEE, 0x82, 0xEE), 'violet'),
-            ((0x41, 0x69, 0xE1), 'royal_blue'),
-            ((0x87, 0xCE, 0xFA), 'baby_blue'),
-            ((0x00, 0xFF, 0xFF), 'aqua'),
-            ((0x7F, 0xFF, 0xD4), 'royal_mint'),
-            ((0x2E, 0x8B, 0x57), 'seafoam_green'),
-            ((0x00, 0x80, 0x00), 'green'),
-            ((0x32, 0xCD, 0x32), 'lime_green'),
-            ((0xFF, 0xFF, 0x00), 'yellow'),
-            ((0xDA, 0xA5, 0x20), 'yellow_orange'),
-            ((0xFF, 0xA5, 0x00), 'orange'),
-            ((0xFF, 0x00, 0x00), 'red'),
-            ((0xFF, 0xC0, 0xCB), 'pink'),
-            ((0xFF, 0x00, 0xFF), 'fusia'),
-            ((0xDA, 0x70, 0xD6), 'lilac'),
-            ((0xE6, 0xE6, 0xFA), 'lavendar'),
-        ]]
+        self._led_color = 'white'

    @property
    def brightness(self):
        return self._brightness

    @property
-    def color_xy(self):
-        return self._xy_color
-
-    def _xy_to_led_color(self, xy_color):
-        """ Convert an XY color to the closest LedController color string. """
-        def abs_dist_squared(p_0, p_1):
-            """ Returns the absolute value of the squared distance """
-            return abs((p_0[0] - p_1[0])**2 + (p_0[1] - p_1[1])**2)
-
-        candidates = [(abs_dist_squared(xy_color, x[0]), x[1]) for x in
-                      self._color_table]
-
-        # First candidate in the sorted list is closest to desired color:
-        return sorted(candidates)[0][1]
+    def rgb_color(self):
+        return COLOR_TABLE[self._led_color]

    def turn_on(self, **kwargs):
        """ Turn the device on. """
@@ -156,13 +145,23 @@ class RGBWLimitlessLED(LimitlessLED):
        if ATTR_BRIGHTNESS in kwargs:
            self._brightness = kwargs[ATTR_BRIGHTNESS]

-        if ATTR_XY_COLOR in kwargs:
-            self._xy_color = kwargs[ATTR_XY_COLOR]
+        if ATTR_RGB_COLOR in kwargs:
+            self._led_color = _rgb_to_led_color(kwargs[ATTR_RGB_COLOR])

-        self.pool.execute(self.controller_id, "set_color",
-                          self._xy_to_led_color(self._xy_color), self.group)
+        effect = kwargs.get(ATTR_EFFECT)
+
+        if effect == EFFECT_COLORLOOP:
+            self.pool.execute(self.controller_id, "disco", self.group)
+        elif effect == EFFECT_WHITE:
+            self.pool.execute(self.controller_id, "white", self.group)
+        else:
+            self.pool.execute(self.controller_id, "set_color",
+                              self._led_color, self.group)
+
+        # Brightness can be set independently of color
        self.pool.execute(self.controller_id, "set_brightness",
                          self._brightness / 255.0, self.group)
+
        self.update_ha_state()


@@ -0,0 +1,184 @@
+"""
+homeassistant.components.light.mqtt
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Allows to configure a MQTT light.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/light.mqtt/
+"""
+import logging
+
+import homeassistant.util.color as color_util
+import homeassistant.components.mqtt as mqtt
+from homeassistant.components.light import (Light,
+                                            ATTR_BRIGHTNESS, ATTR_RGB_COLOR)
+
+_LOGGER = logging.getLogger(__name__)
+
+DEFAULT_NAME = "MQTT Light"
+DEFAULT_QOS = 0
+DEFAULT_PAYLOAD_ON = "on"
+DEFAULT_PAYLOAD_OFF = "off"
+DEFAULT_RGB_PATTERN = "%d,%d,%d"
+DEFAULT_OPTIMISTIC = False
+
+DEPENDENCIES = ['mqtt']
+
+# pylint: disable=unused-argument
+
+
+def setup_platform(hass, config, add_devices_callback, discovery_info=None):
+    """ Add MQTT Light. """
+
+    if config.get('command_topic') is None:
+        _LOGGER.error("Missing required variable: command_topic")
+        return False
+
+    add_devices_callback([MqttLight(
+        hass,
+        config.get('name', DEFAULT_NAME),
+        {"state_topic": config.get('state_topic'),
+         "command_topic": config.get('command_topic'),
+         "brightness_state_topic": config.get('brightness_state_topic'),
+         "brightness_command_topic":
+             config.get('brightness_command_topic'),
+         "rgb_state_topic": config.get('rgb_state_topic'),
+         "rgb_command_topic": config.get('rgb_command_topic')},
+        config.get('rgb', None),
+        config.get('qos', DEFAULT_QOS),
+        {"on": config.get('payload_on', DEFAULT_PAYLOAD_ON),
+         "off": config.get('payload_off', DEFAULT_PAYLOAD_OFF)},
+        config.get('brightness'),
+        config.get('optimistic', DEFAULT_OPTIMISTIC))])
+
+# pylint: disable=too-many-instance-attributes
+
+
+class MqttLight(Light):
+    """ Provides a MQTT light. """
+
+    # pylint: disable=too-many-arguments
+    def __init__(self, hass, name,
+                 topic,
+                 rgb, qos,
+                 payload,
+                 brightness, optimistic):
+
+        self._hass = hass
+        self._name = name
+        self._topic = topic
+        self._rgb = rgb
+        self._qos = qos
+        self._payload = payload
+        self._brightness = brightness
+        self._optimistic = optimistic
+        self._state = False
+        self._xy = None
+
+        def message_received(topic, payload, qos):
+            """ A new MQTT message has been received. """
+            if payload == self._payload["on"]:
+                self._state = True
+            elif payload == self._payload["off"]:
+                self._state = False
+
+            self.update_ha_state()
+
+        if self._topic["state_topic"] is None:
+            # force optimistic mode
+            self._optimistic = True
+        else:
+            # Subscribe the state_topic
+            mqtt.subscribe(self._hass, self._topic["state_topic"],
+                           message_received, self._qos)
+
+        def brightness_received(topic, payload, qos):
+            """ A new MQTT message for the brightness has been received. """
+            self._brightness = int(payload)
+            self.update_ha_state()
+
+        def rgb_received(topic, payload, qos):
+            """ A new MQTT message has been received. """
+            self._rgb = [int(val) for val in payload.split(',')]
+            self._xy = color_util.color_RGB_to_xy(int(self._rgb[0]),
+                                                  int(self._rgb[1]),
+                                                  int(self._rgb[2]))
+            self.update_ha_state()
+
+        if self._topic["brightness_state_topic"] is not None:
+            mqtt.subscribe(self._hass, self._topic["brightness_state_topic"],
+                           brightness_received, self._qos)
+            self._brightness = 255
+        else:
+            self._brightness = None
+
+        if self._topic["rgb_state_topic"] is not None:
+            mqtt.subscribe(self._hass, self._topic["rgb_state_topic"],
+                           rgb_received, self._qos)
+            self._xy = [0, 0]
+        else:
+            self._xy = None
+
+    @property
+    def brightness(self):
+        """ Brightness of this light between 0..255. """
+        return self._brightness
+
+    @property
+    def rgb_color(self):
+        """ RGB color value. """
+        return self._rgb
+
+    @property
+    def color_xy(self):
+        """ RGB color value. """
+        return self._xy
+
+    @property
+    def should_poll(self):
+        """ No polling needed for a MQTT light. """
+        return False
+
+    @property
+    def name(self):
+        """ Returns the name of the device if any. """
+        return self._name
+
+    @property
+    def is_on(self):
+        """ True if device is on. """
+        return self._state
+
+    def turn_on(self, **kwargs):
+        """ Turn the device on. """
+
+        if ATTR_RGB_COLOR in kwargs and \
+           self._topic["rgb_command_topic"] is not None:
+            self._rgb = kwargs[ATTR_RGB_COLOR]
+            rgb = DEFAULT_RGB_PATTERN % tuple(self._rgb)
+            mqtt.publish(self._hass, self._topic["rgb_command_topic"],
+                         rgb, self._qos)
+
+        if ATTR_BRIGHTNESS in kwargs and \
+           self._topic["brightness_command_topic"] is not None:
+            self._brightness = kwargs[ATTR_BRIGHTNESS]
+            mqtt.publish(self._hass, self._topic["brightness_command_topic"],
+                         self._brightness, self._qos)
+
+        mqtt.publish(self._hass, self._topic["command_topic"],
+                     self._payload["on"], self._qos)
+
+        if self._optimistic:
+            # optimistically assume that switch has changed state
+            self._state = True
+            self.update_ha_state()
+
+    def turn_off(self, **kwargs):
+        """ Turn the device off. """
+        mqtt.publish(self._hass, self._topic["command_topic"],
+                     self._payload["off"], self._qos)
+
+        if self._optimistic:
+            # optimistically assume that switch has changed state
+            self._state = False
+            self.update_ha_state()
@@ -4,7 +4,7 @@ homeassistant.components.light.rfxtrx
 Support for RFXtrx lights.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/light.rfxtrx.html
+https://home-assistant.io/components/light.rfxtrx/
 """
 import logging
 import homeassistant.components.rfxtrx as rfxtrx
@@ -59,6 +59,11 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):

        # Check if entity exists or previously added automatically
        if entity_id in rfxtrx.RFX_DEVICES:
+            _LOGGER.debug(
+                "EntityID: %s light_update. Command: %s",
+                entity_id,
+                event.values['Command']
+            )
            if event.values['Command'] == 'On'\
                    or event.values['Command'] == 'Off':
                if event.values['Command'] == 'On':
@@ -20,6 +20,10 @@ turn_on:
      description: Color for the light in XY-format
      example: '[0.52, 0.43]'

+    color_temp:
+      description: Color temperature for the light in mireds (154-500)
+      example: '250'
+
    brightness:
      description: Number between 0..255 indicating brightness
      example: 120
@@ -4,7 +4,7 @@ homeassistant.components.light.tellstick
 Support for Tellstick lights.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/light.tellstick.html
+https://home-assistant.io/components/light.tellstick/
 """
 import logging
 # pylint: disable=no-name-in-module, import-error
@@ -4,15 +4,19 @@ homeassistant.components.light.vera
 Support for Vera lights.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/light.vera.html
+https://home-assistant.io/components/light.vera/
 """
 import logging
+import time
+
 from requests.exceptions import RequestException
 from homeassistant.components.switch.vera import VeraSwitch

-REQUIREMENTS = ['https://github.com/balloob/home-assistant-vera-api/archive/'
-                'a8f823066ead6c7da6fb5e7abaf16fef62e63364.zip'
-                '#python-vera==0.1']
+from homeassistant.components.light import ATTR_BRIGHTNESS
+
+REQUIREMENTS = ['https://github.com/pavoni/home-assistant-vera-api/archive/'
+                'efdba4e63d58a30bc9b36d9e01e69858af9130b8.zip'
+                '#python-vera==0.1.1']

 _LOGGER = logging.getLogger(__name__)

@@ -35,7 +39,10 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
    controller = veraApi.VeraController(base_url)
    devices = []
    try:
-        devices = controller.get_devices(['Switch', 'On/Off Switch'])
+        devices = controller.get_devices([
+            'Switch',
+            'On/Off Switch',
+            'Dimmable Switch'])
    except RequestException:
        # There was a network related error connecting to the vera controller
        _LOGGER.exception("Error communicating with Vera API")
@@ -47,6 +54,28 @@ def setup_platform(hass, config, add_devices_callback, discovery_info=None):
        exclude = extra_data.get('exclude', False)

        if exclude is not True:
-            lights.append(VeraSwitch(device, extra_data))
+            lights.append(VeraLight(device, extra_data))

    add_devices_callback(lights)
+
+
+class VeraLight(VeraSwitch):
+    """ Represents a Vera Light, including dimmable. """
+
+    @property
+    def state_attributes(self):
+        attr = super().state_attributes or {}
+
+        if self.vera_device.is_dimmable:
+            attr[ATTR_BRIGHTNESS] = self.vera_device.get_brightness()
+
+        return attr
+
+    def turn_on(self, **kwargs):
+        if ATTR_BRIGHTNESS in kwargs and self.vera_device.is_dimmable:
+            self.vera_device.set_brightness(kwargs[ATTR_BRIGHTNESS])
+        else:
+            self.vera_device.switch_on()
+
+        self.last_command_send = time.time()
+        self.is_on_status = True
@@ -4,7 +4,7 @@ homeassistant.components.light.wink
 Support for Wink lights.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/light.wink.html
+https://home-assistant.io/components/light.wink/
 """
 import logging

@@ -13,8 +13,8 @@ from homeassistant.components.wink import WinkToggleDevice
 from homeassistant.const import CONF_ACCESS_TOKEN

 REQUIREMENTS = ['https://github.com/balloob/python-wink/archive/'
-                'c2b700e8ca866159566ecf5e644d9c297f69f257.zip'
-                '#python-wink==0.1']
+                '9eb39eaba0717922815e673ad1114c685839d890.zip'
+                '#python-wink==0.1.1']


 def setup_platform(hass, config, add_devices_callback, discovery_info=None):
@@ -0,0 +1,126 @@
+"""
+homeassistant.components.light.zwave
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Support for Z-Wave lights.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/light.zwave/
+"""
+# pylint: disable=import-error
+from openzwave.network import ZWaveNetwork
+from pydispatch import dispatcher
+
+import homeassistant.components.zwave as zwave
+
+from homeassistant.const import STATE_ON, STATE_OFF
+from homeassistant.components.light import (Light, ATTR_BRIGHTNESS)
+from threading import Timer
+
+
+def setup_platform(hass, config, add_devices, discovery_info=None):
+    """ Find and add Z-Wave lights. """
+    if discovery_info is None:
+        return
+
+    node = zwave.NETWORK.nodes[discovery_info[zwave.ATTR_NODE_ID]]
+    value = node.values[discovery_info[zwave.ATTR_VALUE_ID]]
+
+    if value.command_class != zwave.COMMAND_CLASS_SWITCH_MULTILEVEL:
+        return
+    if value.type != zwave.TYPE_BYTE:
+        return
+    if value.genre != zwave.GENRE_USER:
+        return
+
+    value.set_change_verified(False)
+    add_devices([ZwaveDimmer(value)])
+
+
+def brightness_state(value):
+    """
+    Returns the brightness and state according to the current data of given
+    value.
+    """
+    if value.data > 0:
+        return (value.data / 99) * 255, STATE_ON
+    else:
+        return 255, STATE_OFF
+
+
+class ZwaveDimmer(Light):
+    """ Provides a Z-Wave dimmer. """
+    # pylint: disable=too-many-arguments
+    def __init__(self, value):
+        self._value = value
+        self._node = value.node
+
+        self._brightness, self._state = brightness_state(value)
+
+        # Used for value change event handling
+        self._refreshing = False
+        self._timer = None
+
+        dispatcher.connect(
+            self._value_changed, ZWaveNetwork.SIGNAL_VALUE_CHANGED)
+
+    def _value_changed(self, value):
+        """ Called when a value has changed on the network. """
+        if self._value.value_id != value.value_id:
+            return
+
+        if self._refreshing:
+            self._refreshing = False
+            self._brightness, self._state = brightness_state(value)
+        else:
+            def _refresh_value():
+                """Used timer callback for delayed value refresh."""
+                self._refreshing = True
+                self._value.refresh()
+
+            if self._timer is not None and self._timer.isAlive():
+                self._timer.cancel()
+
+            self._timer = Timer(2, _refresh_value)
+            self._timer.start()
+
+        self.update_ha_state()
+
+    @property
+    def should_poll(self):
+        """ No polling needed for a light. """
+        return False
+
+    @property
+    def name(self):
+        """ Returns the name of the device if any. """
+        name = self._node.name or "{}".format(self._node.product_name)
+
+        return "{}".format(name or self._value.label)
+
+    @property
+    def brightness(self):
+        """ Brightness of this light between 0..255. """
+        return self._brightness
+
+    @property
+    def is_on(self):
+        """ True if device is on. """
+        return self._state == STATE_ON
+
+    def turn_on(self, **kwargs):
+        """ Turn the device on. """
+
+        if ATTR_BRIGHTNESS in kwargs:
+            self._brightness = kwargs[ATTR_BRIGHTNESS]
+
+        # Zwave multilevel switches use a range of [0, 99] to control
+        # brightness.
+        brightness = (self._brightness / 255) * 99
+
+        if self._node.set_dimmer(self._value.value_id, brightness):
+            self._state = STATE_ON
+
+    def turn_off(self, **kwargs):
+        """ Turn the device off. """
+        if self._node.set_dimmer(self._value.value_id, 0):
+            self._state = STATE_OFF
@@ -4,7 +4,7 @@ homeassistant.components.logbook
 Parses events and generates a human log.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/logbook.html
+https://home-assistant.io/components/logbook/
 """
 from datetime import timedelta
 from itertools import groupby
@@ -0,0 +1,84 @@
+"""
+homeassistant.components.logger
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Component that will help set the level of logging for components.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/logger/
+"""
+import logging
+from collections import OrderedDict
+
+DOMAIN = 'logger'
+DEPENDENCIES = []
+
+LOGSEVERITY = {
+    'CRITICAL': 50,
+    'FATAL': 50,
+    'ERROR': 40,
+    'WARNING': 30,
+    'WARN': 30,
+    'INFO': 20,
+    'DEBUG': 10,
+    'NOTSET': 0
+}
+
+LOGGER_DEFAULT = 'default'
+LOGGER_LOGS = 'logs'
+
+
+class HomeAssistantLogFilter(logging.Filter):
+    """ A log filter. """
+    # pylint: disable=no-init,too-few-public-methods
+
+    def __init__(self, logfilter):
+        super().__init__()
+
+        self.logfilter = logfilter
+
+    def filter(self, record):
+
+        # Log with filtered severity
+        if LOGGER_LOGS in self.logfilter:
+            for filtername in self.logfilter[LOGGER_LOGS]:
+                logseverity = self.logfilter[LOGGER_LOGS][filtername]
+                if record.name.startswith(filtername):
+                    return record.levelno >= logseverity
+
+        # Log with default severity
+        default = self.logfilter[LOGGER_DEFAULT]
+        return record.levelno >= default
+
+
+def setup(hass, config=None):
+    """ Setup the logger component. """
+
+    logfilter = dict()
+
+    # Set default log severity
+    logfilter[LOGGER_DEFAULT] = LOGSEVERITY['DEBUG']
+    if LOGGER_DEFAULT in config.get(DOMAIN):
+        logfilter[LOGGER_DEFAULT] = LOGSEVERITY[
+            config.get(DOMAIN)[LOGGER_DEFAULT].upper()
+        ]
+
+    # Compute log severity for components
+    if LOGGER_LOGS in config.get(DOMAIN):
+        for key, value in config.get(DOMAIN)[LOGGER_LOGS].items():
+            config.get(DOMAIN)[LOGGER_LOGS][key] = LOGSEVERITY[value.upper()]
+
+        logs = OrderedDict(
+            sorted(
+                config.get(DOMAIN)[LOGGER_LOGS].items(),
+                key=lambda t: len(t[0]),
+                reverse=True
+            )
+        )
+
+        logfilter[LOGGER_LOGS] = logs
+
+    # Set log filter for all log handler
+    for handler in logging.root.handlers:
+        handler.addFilter(HomeAssistantLogFilter(logfilter))
+
+    return True
@@ -1,8 +1,10 @@
 """
 homeassistant.components.media_player
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Component to interface with various media players.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/media_player/
 """
 import logging
 import os
@@ -4,7 +4,7 @@ homeassistant.components.media_player.chromecast
 Provides functionality to interact with Cast devices on the network.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.cast.html
+https://home-assistant.io/components/media_player.cast/
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.media_player.denon
 Provides an interface to Denon Network Receivers.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.denon.html
+https://home-assistant.io/components/media_player.denon/
 """
 import telnetlib
 import logging
@@ -4,7 +4,7 @@ homeassistant.components.media_player.firetv
 Provides functionality to interact with FireTV devices.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.firetv.html
+https://home-assistant.io/components/media_player.firetv/
 """
 import logging
 import requests
@@ -4,7 +4,7 @@ homeassistant.components.media_player.itunes
 Provides an interface to iTunes API.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.itunes.html
+https://home-assistant.io/components/media_player.itunes/
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.media_player.kodi
 Provides an interface to the XBMC/Kodi JSON-RPC API

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.kodi.html
+https://home-assistant.io/components/media_player.kodi/
 """
 import urllib
 import logging
@@ -4,7 +4,7 @@ homeassistant.components.media_player.mpd
 Provides functionality to interact with a Music Player Daemon.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.mpd.html
+https://home-assistant.io/components/media_player.mpd/
 """
 import logging
 import socket
@@ -4,7 +4,7 @@ homeassistant.components.media_player.plex
 Provides an interface to the Plex API.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.plex.html
+https://home-assistant.io/components/media_player.plex/
 """
 import os
 import json
@@ -4,7 +4,7 @@ homeassistant.components.media_player.sonos
 Provides an interface to Sonos players (via SoCo)

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.sonos.html
+https://home-assistant.io/components/media_player.sonos/
 """
 import logging
 import datetime
@@ -4,7 +4,7 @@ homeassistant.components.media_player.squeezebox
 Provides an interface to the Logitech SqueezeBox API

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/media_player.squeezebox.html
+https://home-assistant.io/components/media_player.squeezebox/
 """
 import logging
 import telnetlib
@@ -173,7 +173,7 @@ class SqueezeBoxDevice(MediaPlayerDevice):
    def volume_level(self):
        """ Volume level of the media player (0..1). """
        if 'mixer volume' in self._status:
-            return int(self._status['mixer volume']) / 100.0
+            return int(float(self._status['mixer volume'])) / 100.0

    @property
    def is_volume_muted(self):
@@ -4,7 +4,7 @@ homeassistant.components.modbus
 Modbus component, using pymodbus (python3 branch).

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/modbus.html
+https://home-assistant.io/components/modbus/
 """
 import logging

@@ -4,7 +4,7 @@ homeassistant.components.mqtt
 MQTT component, using paho-mqtt.

 For more details about this component, please refer to the documentation at
-https://home-assistant.io/components/mqtt.html
+https://home-assistant.io/components/mqtt/
 """
 import logging
 import os
@@ -1,15 +1,17 @@
 """
 homeassistant.components.notify
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Provides functionality to notify people.
+
+For more details about this component, please refer to the documentation at
+https://home-assistant.io/components/notify/
 """
 from functools import partial
 import logging
 import os

+import homeassistant.bootstrap as bootstrap
 from homeassistant.config import load_yaml_config_file
-from homeassistant.loader import get_component
 from homeassistant.helpers import config_per_platform

 from homeassistant.const import CONF_NAME
@@ -21,6 +23,9 @@ DEPENDENCIES = []
 ATTR_TITLE = "title"
 ATTR_TITLE_DEFAULT = "Home Assistant"

+# Target of the notification (user, device, etc)
+ATTR_TARGET = 'target'
+
 # Text to notify user of
 ATTR_MESSAGE = "message"

@@ -43,16 +48,15 @@ def setup(hass, config):

    for platform, p_config in config_per_platform(config, DOMAIN, _LOGGER):
        # get platform
-        notify_implementation = get_component(
-            'notify.{}'.format(platform))
+        notify_implementation = bootstrap.prepare_setup_platform(
+            hass, config, DOMAIN, platform)

        if notify_implementation is None:
            _LOGGER.error("Unknown notification service specified.")
            continue

        # create platform service
-        notify_service = notify_implementation.get_service(
-            hass, {DOMAIN: p_config})
+        notify_service = notify_implementation.get_service(hass, p_config)

        if notify_service is None:
            _LOGGER.error("Failed to initialize notification service %s",
@@ -68,8 +72,9 @@ def setup(hass, config):
                return

            title = call.data.get(ATTR_TITLE, ATTR_TITLE_DEFAULT)
+            target = call.data.get(ATTR_TARGET)

-            notify_service.send_message(message, title=title)
+            notify_service.send_message(message, title=title, target=target)

        # register service
        service_call_handler = partial(notify_message, notify_service)
@@ -4,7 +4,7 @@ homeassistant.components.notify.file
 File notification service.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.file.html
+https://home-assistant.io/components/notify.file/
 """
 import logging
 import os
@@ -20,14 +20,14 @@ _LOGGER = logging.getLogger(__name__)
 def get_service(hass, config):
    """ Get the file notification service. """

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: ['filename',
                                     'timestamp']},
                           _LOGGER):
        return None

-    filename = config[DOMAIN]['filename']
-    timestamp = config[DOMAIN]['timestamp']
+    filename = config['filename']
+    timestamp = config['timestamp']

    return FileNotificationService(hass, filename, timestamp)

@@ -4,11 +4,13 @@ homeassistant.components.notify.instapush
 Instapush notification service.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.instapush.html
+https://home-assistant.io/components/notify.instapush/
 """
 import logging
 import json

+import requests
+
 from homeassistant.helpers import validate_config
 from homeassistant.components.notify import (
    DOMAIN, ATTR_TITLE, BaseNotificationService)
@@ -21,7 +23,7 @@ _RESOURCE = 'https://api.instapush.im/v1/'
 def get_service(hass, config):
    """ Get the instapush notification service. """

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: [CONF_API_KEY,
                                     'app_secret',
                                     'event',
@@ -29,52 +31,29 @@ def get_service(hass, config):
                           _LOGGER):
        return None

+    headers = {'x-instapush-appid': config[CONF_API_KEY],
+               'x-instapush-appsecret': config['app_secret']}
+
    try:
-        import requests
-
-    except ImportError:
-        _LOGGER.exception(
-            "Unable to import requests. "
-            "Did you maybe not install the 'Requests' package?")
-
+        response = requests.get(_RESOURCE + 'events/list',
+                                headers=headers).json()
+    except ValueError:
+        _LOGGER.error('Unexpected answer from Instapush API.')
        return None

-    # pylint: disable=unused-variable
-    try:
-        response = requests.get(_RESOURCE)
+    if 'error' in response:
+        _LOGGER.error(response['msg'])
+        return None

-    except requests.ConnectionError:
+    if len([app for app in response if app['title'] == config['event']]) == 0:
        _LOGGER.error(
-            "Connection error "
-            "Please check if https://instapush.im is available.")
-
+            "No app match your given value. "
+            "Please create an app at https://instapush.im")
        return None

-    instapush = requests.Session()
-    headers = {'x-instapush-appid': config[DOMAIN][CONF_API_KEY],
-               'x-instapush-appsecret': config[DOMAIN]['app_secret']}
-    response = instapush.get(_RESOURCE + 'events/list',
-                             headers=headers)
-
-    try:
-        if response.json()['error']:
-            _LOGGER.error(response.json()['msg'])
-    # pylint: disable=bare-except
-    except:
-        try:
-            next(events for events in response.json()
-                 if events['title'] == config[DOMAIN]['event'])
-        except StopIteration:
-            _LOGGER.error(
-                "No event match your given value. "
-                "Please create an event at https://instapush.im")
-        else:
-            return InstapushNotificationService(
-                config[DOMAIN].get(CONF_API_KEY),
-                config[DOMAIN]['app_secret'],
-                config[DOMAIN]['event'],
-                config[DOMAIN]['tracker']
-                )
+    return InstapushNotificationService(
+        config[CONF_API_KEY], config['app_secret'], config['event'],
+        config['tracker'])


 # pylint: disable=too-few-public-methods
@@ -82,9 +61,6 @@ class InstapushNotificationService(BaseNotificationService):
    """ Implements notification service for Instapush. """

    def __init__(self, api_key, app_secret, event, tracker):
-        # pylint: disable=no-name-in-module, unused-variable
-        from requests import Session
-
        self._api_key = api_key
        self._app_secret = app_secret
        self._event = event
@@ -94,8 +70,6 @@ class InstapushNotificationService(BaseNotificationService):
            'x-instapush-appsecret': self._app_secret,
            'Content-Type': 'application/json'}

-        self.instapush = Session()
-
    def send_message(self, message="", **kwargs):
        """ Send a message to a user. """

@@ -104,10 +78,8 @@ class InstapushNotificationService(BaseNotificationService):
        data = {"event": self._event,
                "trackers": {self._tracker: title + " : " + message}}

-        response = self.instapush.post(
-            _RESOURCE + 'post',
-            data=json.dumps(data),
-            headers=self._headers)
+        response = requests.post(_RESOURCE + 'post', data=json.dumps(data),
+                                 headers=self._headers)

        if response.json()['status'] == 401:
            _LOGGER.error(
@@ -4,11 +4,13 @@ homeassistant.components.notify.nma
 NMA (Notify My Android) notification service.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.nma.html
+https://home-assistant.io/components/notify.nma/
 """
 import logging
 import xml.etree.ElementTree as ET

+import requests
+
 from homeassistant.helpers import validate_config
 from homeassistant.components.notify import (
    DOMAIN, ATTR_TITLE, BaseNotificationService)
@@ -21,31 +23,20 @@ _RESOURCE = 'https://www.notifymyandroid.com/publicapi/'
 def get_service(hass, config):
    """ Get the NMA notification service. """

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: [CONF_API_KEY]},
                           _LOGGER):
        return None

-    try:
-        # pylint: disable=unused-variable
-        from requests import Session
-
-    except ImportError:
-        _LOGGER.exception(
-            "Unable to import requests. "
-            "Did you maybe not install the 'Requests' package?")
-
-        return None
-
-    nma = Session()
-    response = nma.get(_RESOURCE + 'verify',
-                       params={"apikey": config[DOMAIN][CONF_API_KEY]})
+    response = requests.get(_RESOURCE + 'verify',
+                            params={"apikey": config[CONF_API_KEY]})
    tree = ET.fromstring(response.content)

    if tree[0].tag == 'error':
        _LOGGER.error("Wrong API key supplied. %s", tree[0].text)
-    else:
-        return NmaNotificationService(config[DOMAIN][CONF_API_KEY])
+        return None
+
+    return NmaNotificationService(config[CONF_API_KEY])


 # pylint: disable=too-few-public-methods
@@ -53,26 +44,20 @@ class NmaNotificationService(BaseNotificationService):
    """ Implements notification service for NMA. """

    def __init__(self, api_key):
-        # pylint: disable=no-name-in-module, unused-variable
-        from requests import Session
-
        self._api_key = api_key
-        self._data = {"apikey": self._api_key}
-
-        self.nma = Session()

    def send_message(self, message="", **kwargs):
        """ Send a message to a user. """

-        title = kwargs.get(ATTR_TITLE)
+        data = {
+            "apikey": self._api_key,
+            "application": 'home-assistant',
+            "event": kwargs.get(ATTR_TITLE),
+            "description": message,
+            "priority": 0,
+        }

-        self._data['application'] = 'home-assistant'
-        self._data['event'] = title
-        self._data['description'] = message
-        self._data['priority'] = 0
-
-        response = self.nma.get(_RESOURCE + 'notify',
-                                params=self._data)
+        response = requests.get(_RESOURCE + 'notify', params=data)
        tree = ET.fromstring(response.content)

        if tree[0].tag == 'error':
@@ -4,59 +4,118 @@ homeassistant.components.notify.pushbullet
 PushBullet platform for notify component.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.pushbullet.html
+https://home-assistant.io/components/notify.pushbullet/
 """
 import logging

-from homeassistant.helpers import validate_config
 from homeassistant.components.notify import (
-    DOMAIN, ATTR_TITLE, BaseNotificationService)
+    ATTR_TITLE, ATTR_TARGET, BaseNotificationService)
 from homeassistant.const import CONF_API_KEY

 _LOGGER = logging.getLogger(__name__)
-REQUIREMENTS = ['pushbullet.py==0.7.1']
+REQUIREMENTS = ['pushbullet.py==0.9.0']


+# pylint: disable=unused-argument
 def get_service(hass, config):
    """ Get the PushBullet notification service. """
+    from pushbullet import PushBullet
+    from pushbullet import InvalidKeyError

-    if not validate_config(config,
-                           {DOMAIN: [CONF_API_KEY]},
-                           _LOGGER):
+    if CONF_API_KEY not in config:
+        _LOGGER.error("Unable to find config key '%s'", CONF_API_KEY)
        return None

    try:
-        # pylint: disable=unused-variable
-        from pushbullet import PushBullet, InvalidKeyError  # noqa
-
-    except ImportError:
-        _LOGGER.exception(
-            "Unable to import pushbullet. "
-            "Did you maybe not install the 'pushbullet.py' package?")
-
-        return None
-
-    try:
-        return PushBulletNotificationService(config[DOMAIN][CONF_API_KEY])
-
+        pushbullet = PushBullet(config[CONF_API_KEY])
    except InvalidKeyError:
        _LOGGER.error(
            "Wrong API key supplied. "
            "Get it at https://www.pushbullet.com/account")
+        return None
+
+    return PushBulletNotificationService(pushbullet)


 # pylint: disable=too-few-public-methods
 class PushBulletNotificationService(BaseNotificationService):
    """ Implements notification service for Pushbullet. """

-    def __init__(self, api_key):
-        from pushbullet import PushBullet
+    def __init__(self, pb):
+        self.pushbullet = pb
+        self.pbtargets = {}
+        self.refresh()

-        self.pushbullet = PushBullet(api_key)
+    def refresh(self):
+        '''
+        Refresh devices, contacts, channels, etc

-    def send_message(self, message="", **kwargs):
-        """ Send a message to a user. """
+        pbtargets stores all targets available from this pushbullet instance
+        into a dict. These are PB objects!. It sacrifices a bit of memory
+        for faster processing at send_message
+        '''
+        self.pushbullet.refresh()
+        self.pbtargets = {
+            'device':
+                {tgt.nickname: tgt for tgt in self.pushbullet.devices},
+            'contact':
+                {tgt.email: tgt for tgt in self.pushbullet.contacts},
+            'channel':
+                {tgt.channel_tag: tgt for tgt in self.pushbullet.channels},
+        }

+    def send_message(self, message=None, **kwargs):
+        """
+        Send a message to a specified target.
+        If no target specified, a 'normal' push will be sent to all devices
+        linked to the PB account.
+        """
+        targets = kwargs.get(ATTR_TARGET)
        title = kwargs.get(ATTR_TITLE)
+        refreshed = False

-        self.pushbullet.push_note(title, message)
+        if not targets:
+            # Backward compatebility, notify all devices in own account
+            self.pushbullet.push_note(title, message)
+            _LOGGER.info('Sent notification to self')
+            return
+
+        # Make list if not so
+        if not isinstance(targets, list):
+            targets = [targets]
+
+        # Main loop, Process all targets specified
+        for target in targets:
+
+            # Allow for untargeted push, combined with other types
+            if target in ['device', 'device/']:
+                self.pushbullet.push_note(title, message)
+                _LOGGER.info('Sent notification to self')
+                continue
+
+            try:
+                ttype, tname = target.split('/', 1)
+            except ValueError:
+                _LOGGER.error('Invalid target syntax: %s', target)
+                continue
+
+            # Refresh if name not found. While awaiting periodic refresh
+            # solution in component, poor mans refresh ;)
+            if ttype not in self.pbtargets:
+                _LOGGER.error('Invalid target syntax: %s', target)
+                continue
+            if tname not in self.pbtargets[ttype] and not refreshed:
+                self.refresh()
+                refreshed = True
+
+            # Attempt push_note on a dict value. Keys are types & target
+            # name. Dict pbtargets has all *actual* targets.
+            try:
+                self.pbtargets[ttype][tname].push_note(title, message)
+            except KeyError:
+                _LOGGER.error('No such target: %s.%s', ttype, tname)
+                continue
+            except self.pushbullet.errors.PushError:
+                _LOGGER.error('Notify failed to: %s.%s', ttype, tname)
+                continue
+            _LOGGER.info('Sent notification to %s.%s', ttype, tname)
@@ -0,0 +1,63 @@
+"""
+homeassistant.components.notify.pushetta
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Pushetta platform for notify component.
+
+For more details about this platform, please refer to the documentation at
+https://home-assistant.io/components/notify.pushetta/
+"""
+import logging
+
+from homeassistant.helpers import validate_config
+from homeassistant.components.notify import (
+    DOMAIN, ATTR_TITLE, BaseNotificationService)
+from homeassistant.const import CONF_API_KEY
+
+_LOGGER = logging.getLogger(__name__)
+
+REQUIREMENTS = ['pushetta==1.0.15']
+
+
+def get_service(hass, config):
+    """ Get the Pushetta notification service. """
+
+    from pushetta import Pushetta, exceptions
+
+    if not validate_config({DOMAIN: config},
+                           {DOMAIN: [CONF_API_KEY, 'channel_name']},
+                           _LOGGER):
+        return None
+
+    try:
+        pushetta = Pushetta(config[CONF_API_KEY])
+        pushetta.pushMessage(config['channel_name'], "Home Assistant started")
+    except exceptions.TokenValidationError:
+        _LOGGER.error("Please check your access token")
+        return None
+    except exceptions.ChannelNotFoundError:
+        _LOGGER.error("Channel '%s' not found", config['channel_name'])
+        return None
+
+    return PushettaNotificationService(config[CONF_API_KEY],
+                                       config['channel_name'])
+
+
+# pylint: disable=too-few-public-methods
+class PushettaNotificationService(BaseNotificationService):
+    """ Implements notification service for Pushetta. """
+
+    def __init__(self, api_key, channel_name):
+
+        from pushetta import Pushetta
+
+        self._api_key = api_key
+        self._channel_name = channel_name
+        self.pushetta = Pushetta(self._api_key)
+
+    def send_message(self, message="", **kwargs):
+        """ Send a message to a user. """
+
+        title = kwargs.get(ATTR_TITLE)
+
+        self.pushetta.pushMessage(self._channel_name,
+                                  "{} {}".format(title, message))
@@ -4,7 +4,7 @@ homeassistant.components.notify.pushover
 Pushover platform for notify component.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.pushover.html
+https://home-assistant.io/components/notify.pushover/
 """
 import logging

@@ -21,32 +21,21 @@ _LOGGER = logging.getLogger(__name__)
 def get_service(hass, config):
    """ Get the pushover notification service. """

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: ['user_key', CONF_API_KEY]},
                           _LOGGER):
        return None

-    try:
-        # pylint: disable=no-name-in-module, unused-variable
-        from pushover import InitError
-
-    except ImportError:
-        _LOGGER.exception(
-            "Unable to import pushover. "
-            "Did you maybe not install the 'python-pushover.py' package?")
-
-        return None
+    from pushover import InitError

    try:
-        api_token = config[DOMAIN].get(CONF_API_KEY)
-        return PushoverNotificationService(
-            config[DOMAIN]['user_key'],
-            api_token)
-
+        return PushoverNotificationService(config['user_key'],
+                                           config[CONF_API_KEY])
    except InitError:
        _LOGGER.error(
            "Wrong API key supplied. "
            "Get it at https://pushover.net")
+        return None


 # pylint: disable=too-few-public-methods
@@ -54,7 +43,6 @@ class PushoverNotificationService(BaseNotificationService):
    """ Implements notification service for Pushover. """

    def __init__(self, user_key, api_token):
-        # pylint: disable=no-name-in-module, unused-variable
        from pushover import Client
        self._user_key = user_key
        self._api_token = api_token
@@ -63,11 +51,9 @@ class PushoverNotificationService(BaseNotificationService):

    def send_message(self, message="", **kwargs):
        """ Send a message to a user. """
-
-        # pylint: disable=no-name-in-module
        from pushover import RequestError
-        title = kwargs.get(ATTR_TITLE)
+
        try:
-            self.pushover.send_message(message, title=title)
+            self.pushover.send_message(message, title=kwargs.get(ATTR_TITLE))
        except RequestError:
            _LOGGER.exception("Could not send pushover notification")
@@ -0,0 +1,15 @@
+notify:
+  description: Send a notification
+
+  fields:
+    message:
+      description: Message body of the notification.
+      example: The garage door has been open for 10 minutes.
+
+    title:
+      description: Optional title for your notification.
+      example: 'Your Garage Door Friend'
+
+    target:
+      description: Target of the notification. Optional depending on the platform
+      example: platform specific
@@ -4,13 +4,12 @@ homeassistant.components.notify.slack
 Slack platform for notify component.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.slack.html
+https://home-assistant.io/components/notify.slack/
 """
 import logging

 from homeassistant.helpers import validate_config
-from homeassistant.components.notify import (
-    DOMAIN, BaseNotificationService)
+from homeassistant.components.notify import DOMAIN, BaseNotificationService
 from homeassistant.const import CONF_API_KEY

 REQUIREMENTS = ['slacker==0.6.8']
@@ -20,34 +19,22 @@ _LOGGER = logging.getLogger(__name__)
 # pylint: disable=unused-variable
 def get_service(hass, config):
    """ Get the slack notification service. """
+    import slacker

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: ['default_channel', CONF_API_KEY]},
                           _LOGGER):
        return None

    try:
-        # pylint: disable=no-name-in-module, unused-variable
-        from slacker import Error as SlackError
-
-    except ImportError:
-        _LOGGER.exception(
-            "Unable to import slacker. "
-            "Did you maybe not install the 'slacker.py' package?")
-
-        return None
-
-    try:
-        api_token = config[DOMAIN].get(CONF_API_KEY)
-
        return SlackNotificationService(
-            config[DOMAIN]['default_channel'],
-            api_token)
+            config['default_channel'],
+            config[CONF_API_KEY])

-    except SlackError as ex:
-        _LOGGER.error(
+    except slacker.Error:
+        _LOGGER.exception(
            "Slack authentication failed")
-        _LOGGER.exception(ex)
+        return None


 # pylint: disable=too-few-public-methods
@@ -56,6 +43,7 @@ class SlackNotificationService(BaseNotificationService):

    def __init__(self, default_channel, api_token):
        from slacker import Slacker
+
        self._default_channel = default_channel
        self._api_token = api_token
        self.slack = Slacker(self._api_token)
@@ -63,11 +51,11 @@ class SlackNotificationService(BaseNotificationService):

    def send_message(self, message="", **kwargs):
        """ Send a message to a user. """
+        import slacker

-        from slacker import Error as SlackError
        channel = kwargs.get('channel', self._default_channel)
+
        try:
            self.slack.chat.post_message(channel, message)
-        except SlackError as ex:
+        except slacker.Error:
            _LOGGER.exception("Could not send slack notification")
-            _LOGGER.exception(ex)
@@ -4,7 +4,7 @@ homeassistant.components.notify.smtp
 Mail (SMTP) notification service.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.smtp.html
+https://home-assistant.io/components/notify.smtp/
 """
 import logging
 import smtplib
@@ -20,35 +20,31 @@ _LOGGER = logging.getLogger(__name__)
 def get_service(hass, config):
    """ Get the mail notification service. """

-    if not validate_config(config,
-                           {DOMAIN: ['server',
-                                     'port',
-                                     'sender',
-                                     'username',
-                                     'password',
-                                     'recipient']},
+    if not validate_config({DOMAIN: config},
+                           {DOMAIN: ['server', 'port', 'sender', 'username',
+                                     'password', 'recipient']},
                           _LOGGER):
        return None

-    smtp_server = config[DOMAIN]['server']
-    port = int(config[DOMAIN]['port'])
-    username = config[DOMAIN]['username']
-    password = config[DOMAIN]['password']
+    smtp_server = config['server']
+    port = int(config['port'])
+    username = config['username']
+    password = config['password']
+    starttls = int(config['starttls'])

    server = None
    try:
        server = smtplib.SMTP(smtp_server, port)
        server.ehlo()
-        if int(config[DOMAIN]['starttls']) == 1:
+        if starttls == 1:
            server.starttls()
            server.ehlo()

        try:
            server.login(username, password)

-        except (smtplib.SMTPException, smtplib.SMTPSenderRefused) as error:
-            _LOGGER.exception(error,
-                              "Please check your settings.")
+        except (smtplib.SMTPException, smtplib.SMTPSenderRefused):
+            _LOGGER.exception("Please check your settings.")

            return None

@@ -66,18 +62,13 @@ def get_service(hass, config):

        return None

-    if server:
-        server.quit()
+    finally:
+        if server:
+            server.quit()

    return MailNotificationService(
-        config[DOMAIN]['server'],
-        config[DOMAIN]['port'],
-        config[DOMAIN]['sender'],
-        config[DOMAIN]['starttls'],
-        config[DOMAIN]['username'],
-        config[DOMAIN]['password'],
-        config[DOMAIN]['recipient']
-        )
+        smtp_server, port, config['sender'], starttls, username, password,
+        config['recipient'])


 # pylint: disable=too-few-public-methods, too-many-instance-attributes
@@ -90,7 +81,7 @@ class MailNotificationService(BaseNotificationService):
        self._server = server
        self._port = port
        self._sender = sender
-        self.starttls = int(starttls)
+        self.starttls = starttls
        self.username = username
        self.password = password
        self.recipient = recipient
@@ -4,7 +4,7 @@ homeassistant.components.notify.syslog
 Syslog notification service.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.syslog.html
+https://home-assistant.io/components/notify.syslog/
 """
 import logging
 import syslog
@@ -52,16 +52,14 @@ PRIORITIES = {5: syslog.LOG_EMERG,
 def get_service(hass, config):
    """ Get the mail notification service. """

-    if not validate_config(config,
-                           {DOMAIN: ['facility',
-                                     'option',
-                                     'priority']},
+    if not validate_config({DOMAIN: config},
+                           {DOMAIN: ['facility', 'option', 'priority']},
                           _LOGGER):
        return None

-    _facility = FACILITIES.get(config[DOMAIN]['facility'], 40)
-    _option = OPTIONS.get(config[DOMAIN]['option'], 10)
-    _priority = PRIORITIES.get(config[DOMAIN]['priority'], -1)
+    _facility = FACILITIES.get(config['facility'], 40)
+    _option = OPTIONS.get(config['option'], 10)
+    _priority = PRIORITIES.get(config['priority'], -1)

    return SyslogNotificationService(_facility, _option, _priority)

@@ -4,7 +4,7 @@ homeassistant.components.notify.telegram
 Telegram platform for notify component.

 For more details about this platform, please refer to the documentation at
-https://home-assistant.io/components/notify.telegram.html
+https://home-assistant.io/components/notify.telegram/
 """
 import logging
 import urllib
@@ -16,35 +16,27 @@ from homeassistant.const import CONF_API_KEY

 _LOGGER = logging.getLogger(__name__)

-try:
-    import telegram
-except ImportError:
-    _LOGGER.exception(
-        "Unable to import python-telegram-bot. "
-        "Did you maybe not install the 'python-telegram-bot' package?")
-
 REQUIREMENTS = ['python-telegram-bot==2.8.7']


 def get_service(hass, config):
    """ Get the Telegram notification service. """
+    import telegram

-    if not validate_config(config,
+    if not validate_config({DOMAIN: config},
                           {DOMAIN: [CONF_API_KEY, 'chat_id']},
                           _LOGGER):
        return None

    try:
-        bot = telegram.Bot(token=config[DOMAIN][CONF_API_KEY])
+        bot = telegram.Bot(token=config[CONF_API_KEY])
        username = bot.getMe()['username']
        _LOGGER.info("Telegram bot is '%s'.", username)
    except urllib.error.HTTPError:
        _LOGGER.error("Please check your access token.")
        return None

-    return TelegramNotificationService(
-        config[DOMAIN][CONF_API_KEY],
-        config[DOMAIN]['chat_id'])
+    return TelegramNotificationService(config[CONF_API_KEY], config['chat_id'])


 # pylint: disable=too-few-public-methods
@@ -52,12 +44,15 @@ class TelegramNotificationService(BaseNotificationService):
    """ Implements notification service for Telegram. """

    def __init__(self, api_key, chat_id):
+        import telegram
+
        self._api_key = api_key
        self._chat_id = chat_id
        self.bot = telegram.Bot(token=self._api_key)

    def send_message(self, message="", **kwargs):
        """ Send a message to a user. """
+        import telegram

        title = kwargs.get(ATTR_TITLE)

@@ -65,4 +60,4 @@ class TelegramNotificationService(BaseNotificationService):
            self.bot.sendMessage(chat_id=self._chat_id,
                                 text=title + "  " + message)
        except telegram.error.TelegramError:
-            _LOGGER.error("Your chat id '%s' is not valid.", self._chat_id)
+            _LOGGER.exception("Error sending message.")
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Paulus Schoutsen	8e44ed0090	Merge pull request #617 from balloob/dev 0.8.0.rc1	2015-11-16 00:03:20 -08:00
Paulus Schoutsen	5fb6076f6e	Version bump to 0.8.0	2015-11-16 00:03:00 -08:00
Fabian Affolter	4ea6def1bd	Update docstrings and link to docs	2015-11-16 07:53:31 +01:00
Paulus Schoutsen	314185ffb8	Merge pull request #629 from rmkraus/dev Adding updater to default list of components	2015-11-15 17:30:15 -08:00
Ryan Kraus	8aafb89a64	Merge remote-tracking branch 'balloob/dev' into dev	2015-11-15 20:04:21 -05:00
Ryan Kraus	d01ed9788f	Added updater to set of default components	2015-11-15 20:03:45 -05:00
Paulus Schoutsen	b4e2f4f0be	Merge pull request #625 from balloob/enhancement_pushbullet Enhancement: targeted notifications in pushbullet	2015-11-15 16:41:18 -08:00
Tom Duijf	f4d8325084	Pushbullet; code cleanup & better errors on config typos	2015-11-16 00:29:04 +00:00
Tom Duijf	cc5dec3c59	Processed feedback from PR comments	2015-11-15 23:46:16 +00:00
Ryan Kraus	ec5a93a0fd	Merge remote-tracking branch 'balloob/dev' into dev	2015-11-15 18:16:49 -05:00
Paulus Schoutsen	aabda1b7b0	Merge pull request #628 from rmkraus/dev Small tweaks to daemon management.	2015-11-15 14:46:58 -08:00
Tom Duijf	aee4411cfb	<type>.<name> split only on first separator	2015-11-15 22:44:51 +00:00
Ryan Kraus	135eb0a0ac	Fixed hass daemon management 1) Changed signal to exit hass to SIGTERM 2) Updated initd script to send SIGTERM 3) Updated systemd script to never send SIGKILL.	2015-11-15 17:43:38 -05:00
Ryan Kraus	01daac066a	Merge remote-tracking branch 'balloob/dev' into dev	2015-11-15 17:37:57 -05:00
Ryan Kraus	5d96ca133d	Merge pull request #627 from rmkraus/update_notify Updater component	2015-11-15 17:36:55 -05:00
Ryan Kraus	3cda1aacff	Fixed typo in updater entity attributes. Left some quotes in there. My bad.	2015-11-15 17:34:06 -05:00
Ryan Kraus	243130c133	Using ATTR_FRIENDLY_NAME in updater component.	2015-11-15 17:32:05 -05:00
Paulus Schoutsen	0d74b628b0	Merge pull request #623 from balloob/lib-clean-on-upgrade Lib clean on upgrade	2015-11-15 14:30:51 -08:00
Ryan Kraus	c314101dde	Updater suggestions from Paulus 1) Moved error checking into get_newest_version function. 2) Fixed import formatting mistake.	2015-11-15 17:30:42 -05:00
Paulus Schoutsen	0f68dc6b7b	Add tests for version upgrade	2015-11-15 14:28:50 -08:00
Ryan Kraus	919c20a263	Implemented suggestions from Paulus for updater 1) Better Error handling when making PyPI requests. 2) More efficient event scheduling. 3) ENTITY_ID in constant 3) friendly_name from constant	2015-11-15 17:23:56 -05:00
Ryan Kraus	9b5385c565	Merge remote-tracking branch 'balloob/dev' into update_notify Conflicts: homeassistant/components/frontend/version.py homeassistant/components/frontend/www_static/frontend.html	2015-11-15 17:00:35 -05:00
Ryan Kraus	7dacf01baa	Updating fronted to latest version.	2015-11-15 16:56:33 -05:00
Tom Duijf	9b4650afd4	Added comments	2015-11-15 20:49:42 +00:00
Tom Duijf	0b0fd2490d	Pushbullet; styling, requirements, example	2015-11-15 19:14:10 +00:00
Tom Duijf	3a85bebbf6	pushbullet; styling and minor fixed before PR	2015-11-15 18:57:16 +00:00
Paulus Schoutsen	18f1de10a5	Merge pull request #624 from leoc/feature-zwave-meter-sensor Add Zwave `meter` command class	2015-11-15 10:16:57 -08:00
Paulus Schoutsen	869d6df65e	Merge pull request #618 from nkgilley/camera-fix add exception handling to generic camera requests function.	2015-11-15 10:02:20 -08:00
Tom Duijf	0a586bd919	Initial commit of pushbullet enhancement	2015-11-15 17:50:36 +00:00
Fabian Affolter	a98b1b0ebc	Update link to docs	2015-11-15 18:50:06 +01:00
Paulus Schoutsen	511028612c	Merge pull request #593 from leoc/feature-zwave-switches Implement zwave switches	2015-11-15 09:30:06 -08:00
Paulus Schoutsen	e3efce5ded	Merge pull request #622 from happyleavesaoc/s20 s20 switch support	2015-11-15 09:28:40 -08:00
Arthur Andersen	340ee171b5	[Zwave] Add zwave polling interval configuration	2015-11-15 17:50:14 +01:00
Arthur Andersen	773da3f755	[Zwave] Add Meter command class	2015-11-15 17:50:11 +01:00
happyleaves	12bdc39274	don't update state in turn_on/off	2015-11-15 08:59:18 -05:00
Paulus Schoutsen	700b7ba591	Remove unused import in notify	2015-11-15 02:20:35 -08:00
Paulus Schoutsen	295f27d259	Only delete lib dir in config upgrade if exists	2015-11-15 02:16:52 -08:00
Ryan Kraus	4463b69245	Added friendly name to updater component.	2015-11-15 05:15:36 -05:00
Paulus Schoutsen	71e4283a2e	Remove lib directory in version upgrade	2015-11-15 02:05:46 -08:00
Paulus Schoutsen	6135b87b1d	Log error if unable to install package	2015-11-15 02:05:13 -08:00
Paulus Schoutsen	04bb7ed58f	Have Notify platform install platform dependencies	2015-11-15 02:04:57 -08:00
Ryan Kraus	dfa9880176	Created updater component	2015-11-15 05:00:24 -05:00
Paulus Schoutsen	88f3a5a50a	Update to new version frontend	2015-11-15 00:51:12 -08:00
Paulus Schoutsen	e2c530b85d	Script: new attribute if can cancel	2015-11-14 15:38:07 -08:00
Arthur Andersen	56c5d345a4	[Zwave] Update HA state on value change	2015-11-14 23:14:08 +01:00
happyleaves	86b9ae9566	addressed comments	2015-11-14 16:14:25 -05:00
Nolan Gilley	df264f2ec0	remove unnecessary else	2015-11-14 15:49:39 -05:00
happyleaves	aabcad59d8	rename platform to orvibo	2015-11-14 15:05:22 -05:00
happyleaves	70fef3c5b5	fixed names	2015-11-14 14:25:53 -05:00
happyleaves	57ec58e255	fixed requirements	2015-11-14 14:19:47 -05:00
happyleaves	cf8e23adbc	s20 switch support	2015-11-14 14:14:02 -05:00
Paulus Schoutsen	eabf9087f3	Merge pull request #621 from fabaff/cleanup-glances Glances sensor cleanup	2015-11-14 10:51:57 -08:00
Nolan Gilley	9acb341b96	remove break	2015-11-14 10:51:07 -05:00
Fabian Affolter	5275ca9ce7	Fix typo	2015-11-14 15:25:52 +01:00
Fabian Affolter	646618a25e	Improve error messages, use constants, and fix docstrings	2015-11-14 15:23:20 +01:00
Paulus Schoutsen	bc48e4f98e	Merge pull request #619 from nkgilley/mqtt-light-color-fix Remove rgb color if it's not an rgb bulb.	2015-11-14 00:51:18 -08:00
Nolan Gilley	776324807e	last PR was dumb. this fix is better.	2015-11-13 14:58:49 -05:00
Nolan Gilley	d68a4b52f1	Remove rgb color if it's not an rgb bulb.	2015-11-13 14:32:47 -05:00
Nolan Gilley	85e0db6ade	add exception handling to generic camera requests function.	2015-11-13 13:55:22 -05:00
Fabian Affolter	d993f4014e	Add link to docs	2015-11-13 08:29:54 +01:00
Paulus Schoutsen	7ebda9c3c6	Fix MQTT light test	2015-11-12 23:08:26 -08:00
Paulus Schoutsen	16e948d032	Merge branch 'pr/552' into dev	2015-11-12 23:04:05 -08:00
Paulus Schoutsen	41d0f95d9a	Move core light test to correct dir	2015-11-12 23:03:56 -08:00
Paulus Schoutsen	bfaaf39e9e	Merge pull request #613 from Xorso/squeezebox_fix Fixing bug when connecting to squeezebox and it is a float	2015-11-12 22:45:03 -08:00
Paulus Schoutsen	16904452b8	Merge pull request #614 from persandstrom/asuswrt_not_loading ASUSWRT more logging and more robust	2015-11-12 11:43:49 -08:00
Per Sandström	158d9e27ff	more robust and more logging	2015-11-12 20:10:25 +01:00
Fabian Affolter	b652dd47cd	Update file header and docstrings	2015-11-12 18:04:48 +01:00
Daren Lord	2812fae721	Fixing bug when connecting to squeezebox and it is a float	2015-11-11 16:21:42 -07:00
Tom Duijf	6da88108fe	Merge pull request #612 from balloob/dt_snmp_fix Fix memory issue in SNMP device tracker	2015-11-11 23:30:43 +01:00
Tom Duijf	5503c12cfd	Fixes memory consumption issue	2015-11-11 21:54:33 +00:00
hexxter	329d63ac11	next online unittest test ;)	2015-11-11 20:52:41 +01:00
hexxter	698e30bd2b	more self.hass.pool.block_till_done()	2015-11-11 20:40:21 +01:00
hexxter	90063ea7f8	check the default value only checkable local. I removed it.	2015-11-11 12:44:59 +01:00
hexxter	0c52b143ae	now saved	2015-11-11 12:38:10 +01:00
hexxter	8f12b997f8	more unittests	2015-11-11 12:32:24 +01:00
Arthur Andersen	877926cfee	[Zwave] Fix docstring	2015-11-11 10:24:00 +01:00
Arthur Andersen	19649390d3	[Zwave] Add binary switch component	2015-11-11 10:24:00 +01:00
Paulus Schoutsen	50d19bb1b4	Merge pull request #592 from leoc/feature-zwave-lights Implement zwave light support	2015-11-11 00:11:51 -08:00
Arthur Andersen	665436cd91	[Zwave] Use threading.Timer for value refresh delay	2015-11-10 19:59:45 +01:00
Paulus Schoutsen	1a3410119e	Merge pull request #606 from fabaff/pushetta Pushetta notification platform	2015-11-10 09:27:16 -08:00
Fabian Affolter	bf2bcb6dcf	Use _LOGGER.error instead of _LOGGER.exception	2015-11-10 18:20:10 +01:00
Fabian Affolter	8371b08676	Add pushetta notify platform	2015-11-10 14:17:28 +01:00
Fabian Affolter	e8a0d54fdd	Add pushetta	2015-11-10 14:17:28 +01:00
Fabian Affolter	f4a82c6f6b	Add pushetta	2015-11-10 14:17:28 +01:00
Paulus Schoutsen	963c4bb70e	Update frontend with new card style	2015-11-10 00:56:56 -08:00
Paulus Schoutsen	ec2e0cc77d	Compile new version frontend	2015-11-10 00:27:41 -08:00
Paulus Schoutsen	0c0ccb361d	Merge branch 'dev-tool-info' into dev	2015-11-10 00:25:33 -08:00
Paulus Schoutsen	994fc32f25	Upgrade frontend with about page	2015-11-10 00:25:19 -08:00
Paulus Schoutsen	d68263d5c4	Another LimitlessLED color fix	2015-11-09 21:55:49 -08:00
Paulus Schoutsen	27b001df2b	Add dev info to frontend urls	2015-11-09 21:48:36 -08:00
Paulus Schoutsen	dafc0ced6b	Update limitlessled with lists for colors	2015-11-09 16:55:10 -08:00
Paulus Schoutsen	3ec2555c66	Merge pull request #601 from balloob/package-install-global Check global installed packages	2015-11-09 12:45:51 -08:00
Fabian Affolter	bfa8e58879	Update link to docs (Jekyll 3 update)	2015-11-09 18:33:11 +01:00
Paulus Schoutsen	2d9a785c18	Merge pull request #600 from balloob/cleanup-notify Clean up notifiy component	2015-11-09 07:32:13 -08:00
Fabian Affolter	97f9f8aa49	Update link to docs (Jekyll 3 update)	2015-11-09 13:12:18 +01:00
Fabian Affolter	64d5ca4da0	Add link to docs and update some docstrings	2015-11-09 08:25:46 +01:00
Paulus Schoutsen	4fb301b7a9	Check global installed packages	2015-11-08 22:55:22 -08:00
Paulus Schoutsen	fda65a4934	Update coveragerc	2015-11-08 22:33:43 -08:00
Paulus Schoutsen	98b4c27211	Style fixes	2015-11-08 22:21:02 -08:00
Paulus Schoutsen	3b3f5fe6fe	Clean up notifiy component	2015-11-08 22:15:34 -08:00
Paulus Schoutsen	1c9c5ce1bd	Merge pull request #599 from ryanturner/dev Initial implementation of mjpeg camera	2015-11-08 22:13:49 -08:00
Ryan Turner	a36b315927	Fixed indentations hopefully	2015-11-09 00:11:11 -06:00
Ryan Turner	f3352546c6	More lint fixes	2015-11-09 00:00:31 -06:00
Ryan Turner	3a6aa8f3d1	Fixed line length issues to make lint happy. Still bummed that I decreased test coverage :(	2015-11-08 23:51:01 -06:00
Ryan Turner	dfa81b0117	Changed camera.mjpeg to use Response and Closing; cleaned up a number of code-clarity issues near that	2015-11-08 23:41:21 -06:00
Paulus Schoutsen	3947691347	Style fixes + rename honeywell	2015-11-08 20:56:11 -08:00
Ryan Turner	8541fdb112	Fixed style issue related to failing build	2015-11-08 22:26:27 -06:00
Ryan Turner	e078ab53ca	Initial implementation of mjpeg camera	2015-11-08 22:15:06 -06:00
Paulus Schoutsen	0665af7f0f	Merge branch 'pr/579' into dev Conflicts: requirements_all.txt	2015-11-08 20:10:30 -08:00
Paulus Schoutsen	6dfb8f5737	Merge pull request #591 from balloob/error-log Expose API to view error log	2015-11-08 20:06:56 -08:00
Paulus Schoutsen	1be2be0886	Merge pull request #590 from balloob/light-rgb Light: base color now in RGB instead of XY	2015-11-08 20:06:49 -08:00
Paulus Schoutsen	3a095f53a8	Merge pull request #596 from badele/dev Minor change for logger component	2015-11-08 19:57:58 -08:00
Paulus Schoutsen	ffce252a12	Merge pull request #598 from SEJeff/update-foscam-snapshot Make a single request to get the foscam camera image	2015-11-08 19:57:21 -08:00
Paulus Schoutsen	7f4c13c382	Upgrade Wink version to v0.1.1	2015-11-08 19:41:22 -08:00
Jeff Schroeder	0f292e8fa6	Remove unused import for re	2015-11-08 20:37:29 -06:00
badele	e63d0c51e0	Change log severity	2015-11-08 19:02:51 +01:00
badele	ebaecdb9d6	Fix flake & pylint	2015-11-08 11:29:56 +01:00
badele	fd50693ca7	Minor change to documentation for logger component	2015-11-08 11:26:36 +01:00
badele	ebc95aca51	Add log info in the rfxtrx component	2015-11-08 11:15:03 +01:00
Jeff Schroeder	137cadb59c	Make a single request to get the foscam camera image This uses the `snapPicture2` command, which is documented in their cgi sdk to return raw jpeg data instead of html containing the image	2015-11-07 20:18:46 -06:00
Arthur Andersen	84f81480bb	[Zwave] Add light zwave component	2015-11-07 15:58:28 +01:00
Arthur Andersen	5565e418f8	[Zwave] Add type and genre to value filter	2015-11-07 15:57:46 +01:00
Arthur Andersen	5b4fc4f346	[Zwave] Add check for missing `discovery_service`	2015-11-07 15:57:28 +01:00
Paulus Schoutsen	e4c3d47dbf	Expose API to view error log	2015-11-07 01:44:02 -08:00
Paulus Schoutsen	95320f39b3	Light: base color now in RGB instead of XY	2015-11-07 01:25:33 -08:00
Paulus Schoutsen	0c97280479	Merge pull request #587 from badele/logfilter Add logger filter feature	2015-11-06 21:59:56 -08:00
Paulus Schoutsen	3e339c7304	Update vincenty version in setup.py	2015-11-06 21:58:18 -08:00
badele	6f06f48ac6	Ensure the component is loaded first	2015-11-06 22:57:03 +01:00
badele	aeacbad4a0	Fix pull request from balloob comments	2015-11-06 22:51:33 +01:00
sander	f60f3fa4a2	Removed unused `self._sensorid`.	2015-11-06 08:37:22 +01:00
sander	e49dc94d4b	slightly better update method.	2015-11-05 09:58:35 +01:00
sander	26a6438e93	learning the alphabet ;-)	2015-11-05 09:37:05 +01:00
Paulus Schoutsen	cae71a73a1	Update frontend	2015-11-05 00:03:01 -08:00
Paulus Schoutsen	df7f6e1235	Remove alarm sensor from demo platform	2015-11-04 23:53:22 -08:00
badele	a31f7d2816	Fix flake & pylint	2015-11-04 22:08:15 +01:00
badele	c52c982510	Add logger feature	2015-11-04 21:30:02 +01:00
sander	ea06d946e6	modified .converagerc and requirements_all.txt	2015-11-04 21:15:56 +01:00
Paulus Schoutsen	bd798b8c55	Merge pull request #582 from balloob/mdi-icons Icons for everyone!	2015-11-04 09:08:34 -08:00
Paulus Schoutsen	ac7456b73b	Merge pull request #577 from happyleavesaoc/limitlessled_additions LimitlessLED effects	2015-11-04 09:02:43 -08:00
Fabian Affolter	d69b08ecf5	Update with comments from PR 579	2015-11-03 11:46:03 +01:00
Paulus Schoutsen	be6dd20236	Update frontend with new icons	2015-11-03 00:20:59 -08:00
Paulus Schoutsen	4d069323f4	Add icon support to entity	2015-11-03 00:20:48 -08:00
Paulus Schoutsen	77f4fc8c22	Frontend: Add materialdesignicons	2015-11-03 00:20:20 -08:00
Paulus Schoutsen	72b4212b19	Demo uses device tracker demo platform	2015-11-03 00:19:28 -08:00
Fabian Affolter	5fce381b89	Remove empty point	2015-11-03 08:50:27 +01:00
happyleaves	7b968f6a6b	re-fix conditionals	2015-11-02 18:11:58 -05:00
happyleaves	4d958c6d18	style fix	2015-11-02 18:08:17 -05:00
happyleaves	566712023d	consolidate conditionals	2015-11-02 18:08:17 -05:00
happyleaves	3cd89f8474	add disco, white effects	2015-11-02 18:08:17 -05:00
Fabian Affolter	218a05356a	Add docstrings	2015-11-02 21:00:53 +01:00
hexxter	186f68cce3	not working mqtt light unittest	2015-11-02 20:16:36 +01:00
hexxter	168eb8e5a2	mqtt light test is working more test should be written	2015-11-02 17:02:34 +01:00
Paulus Schoutsen	c6b5a04312	Allow more static files to be fingerprinted	2015-11-02 00:03:53 -08:00
Paulus Schoutsen	728cd8bb5e	Upgrade Vincenty to latest version	2015-11-02 00:03:53 -08:00
Stefan Jonasson	d873ab0262	Merge pull request #569 from stefan-jonasson/dev Fix for Philio Zwave devices which don't send an off event.	2015-11-02 08:15:57 +01:00
Daniel Høyer Iversen	0ff6a460c2	Update rfxtrx.py	2015-11-01 14:20:11 +01:00
Daniel Høyer Iversen	77539a5b89	revert prev commit	2015-11-01 12:51:09 +01:00
Daniel Høyer Iversen	92b05389f2	Update rfxtrx.py	2015-11-01 12:41:21 +01:00
Daniel Høyer Iversen	82aec895a0	Minor bug in rfxtrx	2015-11-01 12:40:41 +01:00
Stefan Jonasson	ec732becfc	Fixed the get_config_value method when the zwave node was changed while reading it.	2015-10-31 23:34:19 +01:00
Stefan Jonasson	c4261ae2e0	Z-Wave workaround - Added a default value if we did not get any config value.	2015-10-31 23:03:40 +01:00
Stefan Jonasson	cae8932b18	Z-Wave workaround - Connected to the timeout to the configured node value "9. Turn Off Light Time"	2015-10-31 21:23:33 +01:00
sander	efacd66bec	linting and flakeing..	2015-10-31 20:35:23 +01:00
hexxter	31826ab263	redesigned mqtt light an first steps with the unittest system	2015-10-31 19:26:03 +01:00
Paulus Schoutsen	6bb95f5c9b	Merge pull request #560 from pavoni/add-vera-dimmer Add vera dimmer	2015-10-30 21:47:02 -07:00
Paulus Schoutsen	46761d827f	Merge pull request #570 from nkgilley/actiontec-fix Actiontec device_tracker bugfix and removed home_interval	2015-10-30 21:18:28 -07:00
Paulus Schoutsen	288db9a57f	Merge pull request #559 from balloob/light_ct_color Color temperature support for light component and hue platform	2015-10-30 19:11:24 -07:00
Tom Duijf	b76471c4b3	:( .. pyliny	2015-10-30 19:15:38 +00:00
Tom Duijf	194c6343ac	Minor corrections to light and light/demo	2015-10-30 19:01:42 +00:00
Stefan Jonasson	2ad647bb09	Style fixes	2015-10-30 15:30:08 +01:00
Stefan Jonasson	a56173676e	Fixed the workaround match logic	2015-10-30 15:28:06 +01:00
Nolan Gilley	e961dd5f95	increase valid for time to 60 since I was having some issues. removed deprecated lines.	2015-10-30 07:00:35 -04:00
pavoni	0269be5813	Update pyvera version	2015-10-30 09:39:30 +00:00
pavoni	031d5ce255	Fix style issues, update pyvera version.	2015-10-30 09:37:16 +00:00
sander	85bb828149	changed requirements to the latest evohome version.	2015-10-29 21:17:10 +01:00
Paulus Schoutsen	c7a0b5800c	Update links in introduction component	2015-10-29 00:23:05 -07:00
Tom Duijf	f456d2ff23	styling fix	2015-10-28 23:16:25 +00:00
Tom Duijf	6bad702db4	Renamed to color_temp, removed capabilities (not needed afterall)	2015-10-28 23:12:16 +00:00
Nolan Gilley	bcb2451752	fix pylint warning	2015-10-28 17:47:13 -04:00
Nolan Gilley	8eeca94517	removed home_interval option since it was added to the main device_tracker component	2015-10-28 17:43:41 -04:00
Nolan Gilley	3b37a7b737	bugfix for actiontec device tracker	2015-10-28 17:20:15 -04:00
Stefan Jonasson	d578bf3494	Removed extra pylint hint from a previous merge	2015-10-28 22:17:17 +01:00
Stefan Jonasson	8cb046a4a9	Merge remote-tracking branch 'origin/dev' into dev	2015-10-28 22:16:00 +01:00
Stefan Jonasson	30de5af445	Fix for Philio Zwave devices which don't send an off event.	2015-10-28 22:08:50 +01:00
Stefan Jonasson	f74a6ed4c9	Merge remote-tracking branch 'origin/dev' into dev Conflicts: homeassistant/components/script.py homeassistant/helpers/entity_component.py	2015-10-28 21:43:46 +01:00
Stefan Jonasson	f3500542dd	Added pylint hint	2015-10-28 21:42:42 +01:00
Paulus Schoutsen	2eb65c8eb8	Version bump to 0.8.0.dev0	2015-10-28 12:45:57 -07:00
Stefan Jonasson	10c95b4352	Added pylint hint	2015-10-28 20:17:17 +01:00
Stefan Jonasson	48bfc98acb	Fixed entity name	2015-10-28 19:52:09 +01:00
Stefan Jonasson	de027609d8	Fixed entity_id for the script component. Alias now does not override the entity_id Fixed issue: #561	2015-10-28 12:27:58 +01:00
pavoni	6ef0d089ea	Add VeraLight class based on VeraSwitch - add dimmer support	2015-10-27 23:18:46 +00:00
Tom Duijf	805aecd6f9	pylint & flake cleanup	2015-10-27 22:49:45 +00:00
Tom Duijf	e4d33bc6d4	Included ct_color in code coverage	2015-10-27 22:45:35 +00:00
Tom Duijf	e25503bc4a	Hue device capabilities. Color temperature support for light component and hue platform	2015-10-27 22:34:49 +00:00
root	4fcd27e905	light/mqtt to .coveragerc	2015-10-27 16:52:43 +01:00
root	0128357024	Merge remote-tracking branch 'upstream/dev' into dev	2015-10-27 07:52:04 +01:00
root	c5f8095f53	Merge remote-tracking branch 'upstream/master' into dev	2015-10-27 07:51:21 +01:00
root	b66e4f1e15	two different demo lights on without RGB and one with RGB support. and code cleanup more pylint aligned	2015-10-26 15:05:01 +01:00
pavoni	49f4d92c62	Add dimmer as switch	2015-10-26 10:51:23 +00:00
root	a8c2cc4c33	rework for flake8 errors done	2015-10-25 23:38:24 +01:00
root	538f8545f7	fix a bug after the pylint rework	2015-10-25 23:04:43 +01:00
root	7cfce94dfb	pylint rework for light/mqtt	2015-10-25 22:58:07 +01:00
root	469d0619ba	mqtt light component	2015-10-25 21:48:01 +01:00
sander	863955e1bd	got the basics working	2015-10-21 21:48:21 +02:00
sander	f376061e23	Revert "had to change to let this work on windows." This reverts commit `6c106a87f1`.	2015-10-21 19:00:23 +02:00
sander	076b3db5e8	first try	2015-10-21 19:00:15 +02:00
sander	6c106a87f1	had to change to let this work on windows.	2015-10-15 15:02:09 +02:00