Merge branch 'dev' into radio-frequency-consumer-entity

Bump pyOverkiz to 2.0.0 in Overkiz (#173212 )
Bump uiprotect to 11.8.0 (#173227 )
2026-06-08 02:59:41 +00:00 · 2026-06-07 22:09:52 -04:00 · 2026-06-07 22:08:49 -04:00 · 2026-06-07 22:07:48 -04:00 · 2026-06-07 22:07:36 -04:00 · 2026-06-07 22:07:05 -04:00
1470 changed files with 62192 additions and 10968 deletions
@@ -8,39 +8,8 @@ description: Reviews GitHub pull requests and provides feedback comments. This i
 ## Follow these steps:
 1. Use 'gh pr view' to get the PR details and description.
 2. Use 'gh pr diff' to see all the changes in the PR.
-3. Analyze the code changes for:
-   - Code quality and style consistency
-   - Potential bugs or issues
-   - Performance implications
-   - Security concerns
-   - Test coverage
-   - Documentation updates if needed
-4. Ensure any existing review comments have been addressed.
-5. Generate constructive review comments in the CONSOLE. DO NOT POST TO GITHUB YOURSELF.
-
-## Verification:
-
- After the review, run parallel subagents for each finding to double check it.
- Spawn up to a maximum of 10 parallel subagents at a time.
- Gather the results from the subagents and summarize them in the final review comments.
-
+3. Review the changes following the `review` skill. It is VERY IMPORTANT to follow the `review` skill instructions.
+4. Check if all existing review comments have been addressed.

 ## IMPORTANT:
- Just review. DO NOT make any changes
- Be constructive and specific in your comments
- Suggest improvements where appropriate
 - Only provide review feedback in the CONSOLE. DO NOT ACT ON GITHUB.
- No need to run tests or linters, just review the code changes.
- No need to highlight things that are already good.
-
-## Output format:
- List specific comments for each file/line that needs attention.
- In the end, summarize with an overall assessment (approve, request changes, or comment) and bullet point list of changes suggested, if any.
-  - Example output:
-    ```
-    Overall assessment: request changes.
-    - [CRITICAL] sensor.py:143 - Memory leak
-    - [PROBLEM] data_processing.py:87 - Inefficient algorithm
-    - [SUGGESTION] test_init.py:45 - Improve x variable name
-    ```
-  - Make sure to include the file and line number when possible in the bullet points.
@@ -24,6 +24,7 @@ The following platforms have extra guidelines:
 ## Entity platforms

 - Ensure `async_added_to_hass()` and `async_will_remove_from_hass()` have symmetrical behavior. For example, if a subscription is created in `async_added_to_hass()`, it should be unsubscribed in `async_will_remove_from_hass()`. Also, if something is torn down in `async_will_remove_from_hass()`, it should be set up in `async_added_to_hass()`.
+- Entity base class (e.g. `SensorEntity`, `TrackerEntity`) provide a stable API for child classes to inherit from. Do not suggest redeclaring or duplicating attributes, properties, or methods the base class already provides, and do not add guards against the parent's behavior changing — rely on the base class instead.

 ## Integration Quality Scale

@@ -0,0 +1,38 @@
+---
+name: review
+description: Reviews code changes and provides constructive feedback. Should be used when a review is requested to provide a consistent review behavior and output format. This skill can be used for code reviews in general, not just for GitHub pull requests.
+---
+
+# Review Code Changes
+
+## Analyze the code changes for:
+- Code quality and style consistency
+- Potential bugs or issues
+- Performance implications
+- Security concerns
+- Test coverage
+- Documentation updates if needed
+
+## Verification:
+- After the review, run parallel subagents for each finding to double-check it.
+- Spawn up to a maximum of 10 parallel subagents at a time.
+- Gather the results from the subagents and summarize them in the final review comments.
+
+## IMPORTANT:
+- Just review. DO NOT make any changes.
+- Be constructive and specific in your comments.
+- Suggest improvements where appropriate.
+- No need to run tests or linters, just review the code changes.
+- No need to highlight things that are already good.
+
+## Output format:
+- List specific comments for each file/line that needs attention.
+- In the end, summarize with an overall assessment (approve, request changes, or comment) and bullet point list of changes suggested, if any.
+  - Example output:
+    ```
+    Overall assessment: request changes.
+    - [CRITICAL] sensor.py:143 - Memory leak
+    - [PROBLEM] data_processing.py:87 - Inefficient algorithm
+    - [SUGGESTION] test_init.py:45 - Improve x variable name
+    ```
+  - Make sure to include the file and line number when possible in the bullet points.
@@ -43,6 +43,7 @@ This repository contains the core of Home Assistant, a Python 3 based home autom
 - Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
 - If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
 - We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
+- Hardcoded `entity_id`s in tests are fine. If the same one is repeated, use a constant.

 ## Good practices

@@ -27,6 +27,7 @@ The following platforms have extra guidelines:
 ## Entity platforms

 - Ensure `async_added_to_hass()` and `async_will_remove_from_hass()` have symmetrical behavior. For example, if a subscription is created in `async_added_to_hass()`, it should be unsubscribed in `async_will_remove_from_hass()`. Also, if something is torn down in `async_will_remove_from_hass()`, it should be set up in `async_added_to_hass()`.
+- Entity base class (e.g. `SensorEntity`, `TrackerEntity`) provide a stable API for child classes to inherit from. Do not suggest redeclaring or duplicating attributes, properties, or methods the base class already provides, and do not add guards against the parent's behavior changing — rely on the base class instead.

 ## Integration Quality Scale

@@ -344,13 +344,13 @@ jobs:

      - name: Login to DockerHub
        if: matrix.registry == 'docker.io/homeassistant'
-        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
        with:
          username: ${{ secrets.DOCKERHUB_USERNAME }}
          password: ${{ secrets.DOCKERHUB_TOKEN }}

      - name: Login to GitHub Container Registry
-        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
        with:
          registry: ghcr.io
          username: ${{ github.repository_owner }}
@@ -380,7 +380,7 @@ jobs:
      #   2025.12.0.dev202511250240 -> tags: 2025.12.0.dev202511250240, dev
      - name: Generate Docker metadata
        id: meta
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
        with:
          images: ${{ matrix.registry }}/home-assistant
          sep-tags: ","
@@ -394,7 +394,7 @@ jobs:
            type=semver,pattern={{major}}.{{minor}},value=${{ needs.init.outputs.version }},enable=${{ !contains(needs.init.outputs.version, 'd') && !contains(needs.init.outputs.version, 'b') }}

      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v3.7.1
+        uses: docker/setup-buildx-action@d7f5e7f509e45cec5c76c4d5afdd7de93d0b3df5 # v3.7.1

      - name: Copy architecture images to DockerHub
        if: matrix.registry == 'docker.io/homeassistant'
@@ -523,14 +523,14 @@ jobs:
          persist-credentials: false

      - name: Login to GitHub Container Registry
-        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
+        uses: docker/login-action@650006c6eb7dba73a995cc03b0b2d7f5ca915bee # v4.2.0
        with:
          registry: ghcr.io
          username: ${{ github.repository_owner }}
          password: ${{ secrets.GITHUB_TOKEN }}

      - name: Build Docker image
-        uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
+        uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
        with:
          context: . # So action will not pull the repository again
          file: ./script/hassfest/docker/Dockerfile
@@ -543,7 +543,7 @@ jobs:
      - name: Push Docker image
        if: needs.init.outputs.channel != 'dev' && needs.init.outputs.publish == 'true'
        id: push
-        uses: docker/build-push-action@bcafcacb16a39f128d818304e6c9c0c18556b85f # v7.1.0
+        uses: docker/build-push-action@f9f3042f7e2789586610d6e8b85c8f03e5195baf # v7.2.0
        with:
          context: . # So action will not pull the repository again
          file: ./script/hassfest/docker/Dockerfile
@@ -36,7 +36,7 @@
 #   - actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
 #   - actions/setup-node@48b55a011bda9f5d6aeb4c2d9c7362e8dae4041e # v6.4.0
 #   - actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
-#   - github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+#   - github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
 #
 # Container images used:
 #   - ghcr.io/github/gh-aw-firewall/agent:0.25.46
@@ -90,7 +90,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -352,7 +352,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -961,7 +961,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -1100,7 +1100,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -1325,7 +1325,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -1383,7 +1383,7 @@ jobs:
    steps:
      - name: Setup Scripts
        id: setup
-        uses: github/gh-aw-actions/setup@d3abfe96a194bce3a523ed2093ddedd5704cdf62 # v0.74.4
+        uses: github/gh-aw-actions/setup@97f280b14527ca95859c0facba201aeccb2c097f # v0.77.3
        with:
          destination: ${{ runner.temp }}/gh-aw/actions
          job-name: ${{ github.job }}
@@ -39,7 +39,7 @@ on:
 env:
  CACHE_VERSION: 3
  MYPY_CACHE_VERSION: 1
-  HA_SHORT_VERSION: "2026.6"
+  HA_SHORT_VERSION: "2026.7"
  ADDITIONAL_PYTHON_VERSIONS: "[]"
  # 10.3 is the oldest supported version
  # - 10.3.32 is the version currently shipped with Synology (as of 17 Feb 2022)
@@ -28,11 +28,11 @@ jobs:
          persist-credentials: false

      - name: Initialize CodeQL
-        uses: github/codeql-action/init@9e0d7b8d25671d64c341c19c0152d693099fb5ba # v4.35.5
+        uses: github/codeql-action/init@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4.36.0
        with:
          languages: python

      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@9e0d7b8d25671d64c341c19c0152d693099fb5ba # v4.35.5
+        uses: github/codeql-action/analyze@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4.36.0
        with:
          category: "/language:python"
@@ -236,7 +236,7 @@ jobs:
      - name: Detect duplicates using AI
        id: ai_detection
        if: steps.extract.outputs.should_continue == 'true' && steps.fetch_similar.outputs.has_similar == 'true'
-        uses: actions/ai-inference@17ff458cb182449bbb2e43701fcd98f6af8f6570 # v2.1.0
+        uses: actions/ai-inference@a7805884c80886efc241e94a5351df715968a0ad # v2.1.1
        with:
          model: openai/gpt-4o
          system-prompt: |
@@ -62,7 +62,7 @@ jobs:
      - name: Detect language using AI
        id: ai_language_detection
        if: steps.detect_language.outputs.should_continue == 'true'
-        uses: actions/ai-inference@17ff458cb182449bbb2e43701fcd98f6af8f6570 # v2.1.0
+        uses: actions/ai-inference@a7805884c80886efc241e94a5351df715968a0ad # v2.1.1
        with:
          model: openai/gpt-4o-mini
          system-prompt: |
@@ -20,7 +20,7 @@ jobs:
      issues: write # To lock issues
      pull-requests: write # To lock pull requests
    steps:
-      - uses: dessant/lock-threads@7266a7ce5c1df01b1c6db85bf8cd86c737dadbe7 # v6.0.0
+      - uses: dessant/lock-threads@89ae32b08ed1a541efecbab17912962a5e38981c # v6.0.2
        with:
          github-token: ${{ github.token }}
          issue-inactive-days: "30"
@@ -20,22 +20,36 @@ jobs:
    permissions:
      issues: write # To label and close stale issues
      pull-requests: write # To label and close stale PRs
+      actions: write # To delete stalebot state
    steps:
+      # Generate a token for the GitHub App, we use this method to avoid
+      # hitting API limits for our GitHub actions + have a higher rate limit.
+      - name: Generate app token
+        id: token
+        # Pinned to a specific version of the action for security reasons
+        # v3.2.0
+        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1
+        with:
+          client-id: ${{ secrets.ISSUE_TRIAGE_APP_ID }} # zizmor: ignore[secrets-outside-env]
+          private-key: ${{ secrets.ISSUE_TRIAGE_APP_PEM }} # zizmor: ignore[secrets-outside-env]
+
      # The 60 day stale policy for PRs
      # Used for:
      # - PRs
      # - No PRs marked as no-stale
-      # - No issues (-1)
-      - name: 60 days stale PRs policy
-        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
+      # The 90 day stale policy for issues
+      # Used for:
+      # - Issues
+      # - No issues marked as no-stale or help-wanted
+      - name: 60 days stale PRs policy and 90 days stale issue policy
+        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
        with:
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          days-before-stale: 60
-          days-before-close: 7
-          days-before-issue-stale: -1
-          days-before-issue-close: -1
-          operations-per-run: 150
+          repo-token: ${{ steps.token.outputs.token }}
          remove-stale-when-updated: true
+          operations-per-run: 350
+          # pr policy
+          days-before-pr-stale: 60
+          days-before-pr-close: 7
          stale-pr-label: "stale"
          exempt-pr-labels: "no-stale"
          stale-pr-message: >
@@ -48,65 +62,9 @@ jobs:
            branch to ensure that it's up to date with the latest changes.

            Thank you for your contribution!
-
-      # Generate a token for the GitHub App, we use this method to avoid
-      # hitting API limits for our GitHub actions + have a higher rate limit.
-      # This is only used for issues.
-      - name: Generate app token
-        id: token
-        # Pinned to a specific version of the action for security reasons
-        # v3.2.0
-        uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1
-        with:
-          app-id: ${{ secrets.ISSUE_TRIAGE_APP_ID }} # zizmor: ignore[secrets-outside-env]
-          private-key: ${{ secrets.ISSUE_TRIAGE_APP_PEM }} # zizmor: ignore[secrets-outside-env]
-
-      # The 90 day stale policy for issues
-      # Used for:
-      # - Issues
-      # - No issues marked as no-stale or help-wanted
-      # - No PRs (-1)
-      - name: 90 days stale issues
-        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
-        with:
-          repo-token: ${{ steps.token.outputs.token }}
-          days-before-stale: 90
-          days-before-close: 7
-          days-before-pr-stale: -1
-          days-before-pr-close: -1
-          operations-per-run: 250
-          remove-stale-when-updated: true
-          stale-issue-label: "stale"
-          exempt-issue-labels: "no-stale,help-wanted,needs-more-information"
-          stale-issue-message: >
-            There hasn't been any activity on this issue recently. Due to the
-            high number of incoming GitHub notifications, we have to clean some
-            of the old issues, as many of them have already been resolved with
-            the latest updates.
-
-            Please make sure to update to the latest Home Assistant version and
-            check if that solves the issue. Let us know if that works for you by
-            adding a comment 👍
-
-            This issue has now been marked as stale and will be closed if no
-            further activity occurs. Thank you for your contributions.
-
-      # The 30 day stale policy for issues
-      # Used for:
-      # - Issues that are pending more information (incomplete issues)
-      # - No Issues marked as no-stale or help-wanted
-      # - No PRs (-1)
-      - name: Needs more information stale issues policy
-        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
-        with:
-          repo-token: ${{ steps.token.outputs.token }}
-          only-labels: "needs-more-information"
-          days-before-stale: 14
-          days-before-close: 7
-          days-before-pr-stale: -1
-          days-before-pr-close: -1
-          operations-per-run: 250
-          remove-stale-when-updated: true
+          # issue policy
+          days-before-issue-stale: 90
+          days-before-issue-close: 7
          stale-issue-label: "stale"
          exempt-issue-labels: "no-stale,help-wanted"
          stale-issue-message: >
@@ -137,7 +137,7 @@ jobs:
          sed -i "/uv/d" requirements_diff.txt

      - name: Build wheels
-        uses: home-assistant/wheels@e5742a69d69f0e274e2689c998900c7d19652c21 # 2025.12.0
+        uses: home-assistant/wheels@34957438948e0b3dcde73c77750643dadae594f5 # 2026.06.0
        with:
          abi: ${{ matrix.abi }}
          tag: musllinux_1_2
@@ -195,7 +195,7 @@ jobs:
          sed -i "/uv/d" requirements_diff.txt

      - name: Build wheels
-        uses: home-assistant/wheels@e5742a69d69f0e274e2689c998900c7d19652c21 # 2025.12.0
+        uses: home-assistant/wheels@34957438948e0b3dcde73c77750643dadae594f5 # 2026.06.0
        with:
          abi: ${{ matrix.abi }}
          tag: musllinux_1_2
@@ -1,6 +1,6 @@
 repos:
  - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.15.13
+    rev: v0.15.15
    hooks:
      - id: ruff-check
        args:
@@ -286,6 +286,7 @@ homeassistant.components.huawei_lte.*
 homeassistant.components.humidifier.*
 homeassistant.components.husqvarna_automower.*
 homeassistant.components.huum.*
+homeassistant.components.hvv_departures.*
 homeassistant.components.hydrawise.*
 homeassistant.components.hyperion.*
 homeassistant.components.hypontech.*
@@ -33,6 +33,7 @@ This repository contains the core of Home Assistant, a Python 3 based home autom
 - Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
 - If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
 - We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
+- Hardcoded `entity_id`s in tests are fine. If the same one is repeated, use a constant.

 ## Good practices

@@ -453,6 +453,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/ecovacs/ @mib1185 @edenhaus @Augar
 /homeassistant/components/ecowitt/ @pvizeli
 /tests/components/ecowitt/ @pvizeli
+/homeassistant/components/edifier_infrared/ @abmantis
+/tests/components/edifier_infrared/ @abmantis
 /homeassistant/components/efergy/ @tkdrob
 /tests/components/efergy/ @tkdrob
 /homeassistant/components/egardia/ @jeroenterheerdt
@@ -501,6 +503,8 @@ CLAUDE.md @home-assistant/core
 /homeassistant/components/enphase_envoy/ @bdraco @cgarwood @catsmanac
 /tests/components/enphase_envoy/ @bdraco @cgarwood @catsmanac
 /homeassistant/components/entur_public_transport/ @hfurubotten @SanderBlom
+/homeassistant/components/envertech_evt800/ @daniel-bergmann-00
+/tests/components/envertech_evt800/ @daniel-bergmann-00
 /homeassistant/components/environment_canada/ @gwww @michaeldavie
 /tests/components/environment_canada/ @gwww @michaeldavie
 /homeassistant/components/ephember/ @ttroy50 @roberty99
@@ -623,8 +627,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/generic_hygrostat/ @Shulyaka
 /homeassistant/components/geniushub/ @manzanotti
 /tests/components/geniushub/ @manzanotti
-/homeassistant/components/gentex_homelink/ @niaexa @ryanjones-gentex
-/tests/components/gentex_homelink/ @niaexa @ryanjones-gentex
+/homeassistant/components/gentex_homelink/ @Gentex-Corporation/Homelink @rjones-gentex
+/tests/components/gentex_homelink/ @Gentex-Corporation/Homelink @rjones-gentex
 /homeassistant/components/geo_json_events/ @exxamalte
 /tests/components/geo_json_events/ @exxamalte
 /homeassistant/components/geo_location/ @home-assistant/core
@@ -718,6 +722,8 @@ CLAUDE.md @home-assistant/core
 /homeassistant/components/heatmiser/ @andylockran
 /homeassistant/components/hegel/ @boazca
 /tests/components/hegel/ @boazca
+/homeassistant/components/helty/ @ebaschiera
+/tests/components/helty/ @ebaschiera
 /homeassistant/components/heos/ @andrewsayre
 /tests/components/heos/ @andrewsayre
 /homeassistant/components/here_travel_time/ @eifinger
@@ -836,6 +842,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/imgw_pib/ @bieniu
 /homeassistant/components/immich/ @mib1185
 /tests/components/immich/ @mib1185
+/homeassistant/components/imou/ @Imou-OpenPlatform
+/tests/components/imou/ @Imou-OpenPlatform
 /homeassistant/components/improv_ble/ @emontnemery
 /tests/components/improv_ble/ @emontnemery
 /homeassistant/components/incomfort/ @jbouwh
@@ -2054,8 +2062,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/yamaha_musiccast/ @vigonotion @micha91
 /homeassistant/components/yandex_transport/ @rishatik92 @devbis
 /tests/components/yandex_transport/ @rishatik92 @devbis
-/homeassistant/components/yardian/ @h3l1o5
-/tests/components/yardian/ @h3l1o5
+/homeassistant/components/yardian/ @aeon-matrix
+/tests/components/yardian/ @aeon-matrix
 /homeassistant/components/yeelight/ @zewelor @shenxn @starkillerOG @alexyao2015
 /tests/components/yeelight/ @zewelor @shenxn @starkillerOG @alexyao2015
 /homeassistant/components/yeelightsunflower/ @lindsaymarkward
@@ -92,8 +92,7 @@ def _extract_backup(
    ):
        ostf.tar.extractall(
            path=Path(tempdir, "extracted"),
-            members=securetar.secure_path(ostf.tar),
-            filter="fully_trusted",
+            filter="tar",
        )
        backup_meta_file = Path(tempdir, "extracted", "backup.json")
        backup_meta = json.loads(backup_meta_file.read_text(encoding="utf8"))
@@ -119,8 +118,7 @@ def _extract_backup(
        ) as istf:
            istf.extractall(
                path=Path(tempdir, "homeassistant"),
-                members=securetar.secure_path(istf),
-                filter="fully_trusted",
+                filter="tar",
            )
            if restore_content.restore_homeassistant:
                keep = list(KEEP_BACKUPS)
@@ -6,6 +6,7 @@
    "lg_netcast",
    "lg_soundbar",
    "lg_thinq",
+    "lg_tv_rs232",
    "webostv"
  ]
 }
@@ -11,7 +11,6 @@ from homeassistant.components.sensor import (
    SensorStateClass,
 )
 from homeassistant.const import (
-    CONCENTRATION_PARTS_PER_CUBIC_METER,
    PERCENTAGE,
    UV_INDEX,
    UnitOfIrradiance,
@@ -47,6 +46,8 @@ from .coordinator import (

 PARALLEL_UPDATES = 1

+PARTS_PER_CUBIC_METER = "p/m³"
+

@dataclass(frozen=True, kw_only=True)
 class AccuWeatherSensorDescription(SensorEntityDescription):
@@ -81,7 +82,7 @@ FORECAST_SENSOR_TYPES: tuple[AccuWeatherSensorDescription, ...] = (
    AccuWeatherSensorDescription(
        key="Grass",
        entity_registry_enabled_default=False,
-        native_unit_of_measurement=CONCENTRATION_PARTS_PER_CUBIC_METER,
+        native_unit_of_measurement=PARTS_PER_CUBIC_METER,
        value_fn=lambda data: cast(int, data[ATTR_VALUE]),
        attr_fn=lambda data: {
            ATTR_LEVEL: POLLEN_CATEGORY_MAP[data[ATTR_CATEGORY_VALUE]]
@@ -107,7 +108,7 @@ FORECAST_SENSOR_TYPES: tuple[AccuWeatherSensorDescription, ...] = (
    AccuWeatherSensorDescription(
        key="Mold",
        entity_registry_enabled_default=False,
-        native_unit_of_measurement=CONCENTRATION_PARTS_PER_CUBIC_METER,
+        native_unit_of_measurement=PARTS_PER_CUBIC_METER,
        value_fn=lambda data: cast(int, data[ATTR_VALUE]),
        attr_fn=lambda data: {
            ATTR_LEVEL: POLLEN_CATEGORY_MAP[data[ATTR_CATEGORY_VALUE]]
@@ -116,7 +117,7 @@ FORECAST_SENSOR_TYPES: tuple[AccuWeatherSensorDescription, ...] = (
    ),
    AccuWeatherSensorDescription(
        key="Ragweed",
-        native_unit_of_measurement=CONCENTRATION_PARTS_PER_CUBIC_METER,
+        native_unit_of_measurement=PARTS_PER_CUBIC_METER,
        entity_registry_enabled_default=False,
        value_fn=lambda data: cast(int, data[ATTR_VALUE]),
        attr_fn=lambda data: {
@@ -184,7 +185,7 @@ FORECAST_SENSOR_TYPES: tuple[AccuWeatherSensorDescription, ...] = (
    ),
    AccuWeatherSensorDescription(
        key="Tree",
-        native_unit_of_measurement=CONCENTRATION_PARTS_PER_CUBIC_METER,
+        native_unit_of_measurement=PARTS_PER_CUBIC_METER,
        entity_registry_enabled_default=False,
        value_fn=lambda data: cast(int, data[ATTR_VALUE]),
        attr_fn=lambda data: {
@@ -13,5 +13,5 @@
  "integration_type": "hub",
  "iot_class": "cloud_polling",
  "quality_scale": "silver",
-  "requirements": ["actron-neo-api==0.5.6"]
+  "requirements": ["actron-neo-api==0.5.12"]
 }
@@ -7,7 +7,7 @@ from homeassistant.components.select import (
    PLATFORM_SCHEMA as SELECT_PLATFORM_SCHEMA,
    SelectEntity,
 )
-from homeassistant.const import CONF_NAME
+from homeassistant.const import CONF_NAME, CONF_OPTIONS
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
@@ -19,9 +19,6 @@ from .hub import AdsHub

 DEFAULT_NAME = "ADS select"

-# pylint: disable-next=home-assistant-duplicate-const
-CONF_OPTIONS = "options"
-
 PLATFORM_SCHEMA = SELECT_PLATFORM_SCHEMA.extend(
    {
        vol.Required(CONF_ADS_VAR): cv.string,
@@ -72,8 +72,7 @@ async def _resolve_attachments(
            resolved_attachments.append(
                conversation.Attachment(
                    media_content_id=media_content_id,
-                    mime_type=attachment.get("media_content_type")
-                    or image_data.content_type,
+                    mime_type=image_data.content_type,
                    path=temp_filename,
                )
            )
@@ -1,7 +1,7 @@
 .trigger_common_fields:
  behavior: &trigger_behavior
    required: true
-    default: any
+    default: each
    selector:
      automation_behavior:
        mode: trigger
@@ -8,5 +8,5 @@
  "integration_type": "device",
  "iot_class": "local_polling",
  "quality_scale": "platinum",
-  "requirements": ["airos==0.6.5"]
+  "requirements": ["airos==0.6.8"]
 }
@@ -8,6 +8,7 @@ from bleak.backends.device import BLEDevice
 from bleak_retry_connector import close_stale_connections_by_address

 from homeassistant.components import bluetooth
+from homeassistant.components.bluetooth import BluetoothReachabilityIntent
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import ConfigEntryNotReady
@@ -63,7 +64,16 @@ class AirthingsBLEDataUpdateCoordinator(DataUpdateCoordinator[AirthingsDevice]):

        if not ble_device:
            raise ConfigEntryNotReady(
-                f"Could not find Airthings device with address {address}"
+                translation_domain=DOMAIN,
+                translation_key="device_not_found",
+                translation_placeholders={
+                    "address": address,
+                    "reason": bluetooth.async_address_reachability_diagnostics(
+                        self.hass,
+                        address.upper(),
+                        BluetoothReachabilityIntent.CONNECTION,
+                    ),
+                },
            )
        self.ble_device = ble_device

@@ -54,5 +54,10 @@
        "name": "Radon longterm level"
      }
    }
+  },
+  "exceptions": {
+    "device_not_found": {
+      "message": "Could not find Airthings device with address {address}: {reason}"
+    }
  }
 }
@@ -1,6 +1,10 @@
 """The AirVisual Pro integration."""

-from homeassistant.helpers.device_registry import DeviceInfo
+from homeassistant.helpers.device_registry import (
+    CONNECTION_NETWORK_MAC,
+    DeviceInfo,
+    format_mac,
+)
 from homeassistant.helpers.entity import EntityDescription
 from homeassistant.helpers.update_coordinator import CoordinatorEntity

@@ -25,6 +29,12 @@ class AirVisualProEntity(CoordinatorEntity[AirVisualProCoordinator]):
        """Return device registry information for this entity."""
        return DeviceInfo(
            identifiers={(DOMAIN, self.coordinator.data["serial_number"])},
+            connections={
+                (
+                    CONNECTION_NETWORK_MAC,
+                    format_mac(self.coordinator.data["status"]["mac_address"]),
+                )
+            },
            manufacturer="AirVisual",
            model=self.coordinator.data["status"]["model"],
            name=self.coordinator.data["settings"]["node_name"],
@@ -5,7 +5,7 @@
  fields: &trigger_common_fields
    behavior:
      required: true
-      default: any
+      default: each
      selector:
        automation_behavior:
          mode: trigger
@@ -1,8 +1,5 @@
 """Alexa Devices integration."""

-import asyncio
-import contextlib
-
 from homeassistant.const import CONF_COUNTRY, Platform
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers import aiohttp_client, config_validation as cv, httpx_client
@@ -46,21 +43,17 @@ async def async_setup_entry(hass: HomeAssistant, entry: AmazonConfigEntry) -> bo
    async def _on_http2_reauth_required() -> None:
        entry.async_start_reauth(hass)

-    async def _cancel_http2() -> None:
-        http2_task.cancel()
-        with contextlib.suppress(asyncio.CancelledError):
-            await http2_task
-
    alexa_httpx_client = httpx_client.get_async_client(
        hass,
        alpn_protocols=SSL_ALPN_HTTP11_HTTP2,
    )

-    http2_task = await coordinator.api.start_http2_processing(
-        alexa_httpx_client, on_reauth_required=_on_http2_reauth_required
+    await coordinator.api.start_http2_processing(
+        alexa_httpx_client,
+        on_reauth_required=_on_http2_reauth_required,
    )

-    entry.async_on_unload(_cancel_http2)
+    entry.async_on_unload(coordinator.api.stop_http2_processing)

    entry.runtime_data = coordinator

@@ -39,11 +39,8 @@ async def async_setup_entry(
 class AmazonRoutineButton(AmazonServiceEntity, ButtonEntity):
    """Button entity for Alexa routine."""

-    _attr_has_entity_name = True
-
    def __init__(self, coordinator: AmazonDevicesCoordinator, routine: str) -> None:
        """Initialize the routine button entity."""
-        self._coordinator = coordinator
        self._routine = routine
        super().__init__(
            coordinator,
@@ -52,4 +49,4 @@ class AmazonRoutineButton(AmazonServiceEntity, ButtonEntity):

    async def async_press(self) -> None:
        """Handle button press action."""
-        await self._coordinator.api.call_routine(self._routine)
+        await self.coordinator.api.call_routine(self._routine)
@@ -204,7 +204,26 @@ class AmazonDevicesCoordinator(DataUpdateCoordinator[dict[str, AmazonDevice]]):

    async def sync_media_state(self) -> None:
        """Sync media state."""
-        await self.api.sync_media_state()
+        try:
+            await self.api.sync_media_state()
+        except CannotAuthenticate as err:
+            raise ConfigEntryAuthFailed(
+                translation_domain=DOMAIN,
+                translation_key="invalid_auth",
+                translation_placeholders={"error": repr(err)},
+            ) from err
+        except (CannotConnect, TimeoutError) as err:
+            raise ConfigEntryNotReady(
+                translation_domain=DOMAIN,
+                translation_key="cannot_connect_with_error",
+                translation_placeholders={"error": repr(err)},
+            ) from err
+        except (CannotRetrieveData, ValueError) as err:
+            raise ConfigEntryNotReady(
+                translation_domain=DOMAIN,
+                translation_key="cannot_retrieve_data_with_error",
+                translation_placeholders={"error": repr(err)},
+            ) from err

    async def media_state_event_handler(
        self, media_state: dict[str, AmazonMediaState]
@@ -53,7 +53,7 @@ class AlexaVoiceEvent(AmazonEntity, EventEntity):

    _attr_event_types = [EVENT_TYPE]
    coordinator: AmazonDevicesCoordinator
-    _last_seen_timestamp: int | None = None
+    _last_seen_timestamp: int = 0  #  January 1, 1970 at 12:00:00 AM

    @callback
    def _handle_coordinator_update(self) -> None:
@@ -71,7 +71,8 @@ class AlexaVoiceEvent(AmazonEntity, EventEntity):
            )
            return

-        if vocal_record.timestamp == self._last_seen_timestamp:
+        if vocal_record.timestamp <= self._last_seen_timestamp:
+            # Discard old events that have already been processed
            return

        self._last_seen_timestamp = vocal_record.timestamp
@@ -8,5 +8,5 @@
  "iot_class": "cloud_polling",
  "loggers": ["aioamazondevices"],
  "quality_scale": "platinum",
-  "requirements": ["aioamazondevices==13.8.0"]
+  "requirements": ["aioamazondevices==14.0.0"]
 }
@@ -1,8 +1,7 @@
 """Media player platform for Alexa Devices."""

-from dataclasses import dataclass
 from datetime import datetime
-from typing import Any, Final
+from typing import Any

 from aioamazondevices.structures import (
    AmazonMediaControls,
@@ -38,18 +37,6 @@ STANDARD_SUPPORTED_FEATURES = (
 )


-@dataclass(frozen=True, kw_only=True)
-class AmazonDevicesMediaPlayerEntityDescription(MediaPlayerEntityDescription):
-    """Describes an Alexa Devices media player entity."""
-
-
-MEDIA_PLAYERS: Final = (
-    AmazonDevicesMediaPlayerEntityDescription(
-        key="media",
-    ),
-)
-
-
 async def async_setup_entry(
    hass: HomeAssistant,
    entry: AmazonConfigEntry,
@@ -69,9 +56,10 @@ async def async_setup_entry(
                continue

            known_devices.add(serial_num)
-            new_entities.extend(
-                AlexaDevicesMediaPlayer(coordinator, serial_num, description)
-                for description in MEDIA_PLAYERS
+            new_entities.append(
+                AlexaDevicesMediaPlayer(
+                    coordinator, serial_num, MediaPlayerEntityDescription(key="media")
+                )
            )

        if new_entities:
@@ -85,8 +73,6 @@ async def async_setup_entry(
 class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
    """Representation of an Alexa device media player."""

-    entity_description: AmazonDevicesMediaPlayerEntityDescription
-
    _attr_name = None  # Uses the device name
    _attr_device_class = MediaPlayerDeviceClass.SPEAKER
    _attr_volume_step = 0.05
@@ -95,7 +81,7 @@ class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
        self,
        coordinator: AmazonDevicesCoordinator,
        serial_num: str,
-        description: AmazonDevicesMediaPlayerEntityDescription,
+        description: MediaPlayerEntityDescription,
    ) -> None:
        """Initialize."""
        self._prev_volume: int | None = None
@@ -156,9 +142,11 @@ class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
    @property
    def is_volume_muted(self) -> bool | None:
        """Return True if the volume is muted."""
-        if not self.volume_state:
+        if not self.volume_state or self.volume_state.volume is None:
            return None
-        return self.volume_state.volume == 0
+        # is_muted is True when Alexa has muted the device
+        # volume == 0 is where we have muted by setting volume to 0
+        return self.volume_state.is_muted or self.volume_state.volume == 0

    @property
    def media_title(self) -> str | None:
@@ -212,7 +200,7 @@ class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
    @property
    def media_content_type(self) -> MediaType | None:
        """Content type — tells HA what kind of media is playing."""
-        if self.state in [MediaPlayerState.PLAYING, MediaPlayerState.PAUSED]:
+        if self.state in (MediaPlayerState.PLAYING, MediaPlayerState.PAUSED):
            return MediaType.MUSIC
        return None

@@ -225,7 +213,8 @@ class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
        **kwargs: Any,
    ) -> None:
        """Play a piece of media."""
-        await self.async_call_alexa_music(media_id, media_type)
+        provider = media_type.value if isinstance(media_type, MediaType) else media_type
+        await self.async_call_alexa_music(media_id, provider)

    @alexa_api_call
    async def async_call_alexa_music(
@@ -259,12 +248,20 @@ class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
            return
        if mute:
            self._prev_volume = self.volume_state.volume
-            target_volume = 0
-        else:
-            if self._prev_volume is None:
-                return
-            target_volume = self._prev_volume
+            await self.async_set_volume_level(0)
+            return
+
+        if self.volume_state.is_muted and self._prev_volume is None:
+            # is muted by Alexa which we can see but not control
+            # when muted this way, volume is still set
+            # changing volume will unmute
+            # if HA set volume to 0 then Alexa muted we just default to 30%
+            self._prev_volume = self.volume_state.volume or 30
+        if self._prev_volume is None:
+            return
+        target_volume = self._prev_volume
        await self.async_set_volume_level(target_volume / 100)
+        self._prev_volume = None

    @alexa_api_call
    async def _send_media_command(self, command: AmazonMediaControls) -> None:
@@ -125,6 +125,9 @@
    },
    "invalid_sound_value": {
      "message": "Invalid sound {sound} specified"
+    },
+    "unknown_exception": {
+      "message": "Unknown error occurred: {error}"
    }
  },
  "selector": {
@@ -5,8 +5,12 @@ from typing import Any
 import voluptuous as vol

 from homeassistant.components import labs, websocket_api
-from homeassistant.const import EVENT_HOMEASSISTANT_STARTED
-from homeassistant.core import Event, HomeAssistant, callback
+from homeassistant.components.hassio import HassioNotReadyError
+from homeassistant.config_entries import SOURCE_SYSTEM, ConfigEntry
+from homeassistant.core import HomeAssistant, callback
+from homeassistant.exceptions import ConfigEntryNotReady
+from homeassistant.helpers import discovery_flow
+from homeassistant.helpers.start import async_at_started
 from homeassistant.helpers.typing import ConfigType
 from homeassistant.util.hass_dict import HassKey

@@ -49,6 +53,7 @@ CONFIG_SCHEMA = vol.Schema(
 )

 DATA_COMPONENT: HassKey[Analytics] = HassKey(DOMAIN)
+_DATA_SNAPSHOTS_URL: HassKey[str | None] = HassKey(f"{DOMAIN}_snapshots_url")

 LABS_SNAPSHOT_FEATURE = "snapshots"

@@ -57,18 +62,39 @@ async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
    """Set up the analytics integration."""
    analytics_config = config.get(DOMAIN, {})

+    snapshots_url: str | None = None
    if CONF_SNAPSHOTS_URL in analytics_config:
        await labs.async_update_preview_feature(
            hass, DOMAIN, LABS_SNAPSHOT_FEATURE, enabled=True
        )
        snapshots_url = analytics_config[CONF_SNAPSHOTS_URL]
-    else:
-        snapshots_url = None

+    hass.data[_DATA_SNAPSHOTS_URL] = snapshots_url
+
+    discovery_flow.async_create_flow(
+        hass, DOMAIN, context={"source": SOURCE_SYSTEM}, data={}
+    )
+
+    websocket_api.async_register_command(hass, websocket_analytics)
+    websocket_api.async_register_command(hass, websocket_analytics_preferences)
+
+    hass.http.register_view(AnalyticsDevicesView)
+
+    return True
+
+
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Set up Analytics from a config entry."""
+    snapshots_url = hass.data[_DATA_SNAPSHOTS_URL]
    analytics = Analytics(hass, snapshots_url)

-    # Load stored data
-    await analytics.load()
+    try:
+        await analytics.load()
+    except HassioNotReadyError as err:
+        raise ConfigEntryNotReady(
+            translation_domain=DOMAIN,
+            translation_key="supervisor_not_ready",
+        ) from err

    started = False

@@ -80,8 +106,8 @@ async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
        if started:
            await analytics.async_schedule()

-    async def start_schedule(_event: Event) -> None:
-        """Start the send schedule after the started event."""
+    async def start_schedule(hass: HomeAssistant) -> None:
+        """Start the send schedule once Home Assistant has started."""
        nonlocal started
        started = True
        await analytics.async_schedule()
@@ -89,12 +115,7 @@ async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
    labs.async_subscribe_preview_feature(
        hass, DOMAIN, LABS_SNAPSHOT_FEATURE, _async_handle_labs_update
    )
-    hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STARTED, start_schedule)
-
-    websocket_api.async_register_command(hass, websocket_analytics)
-    websocket_api.async_register_command(hass, websocket_analytics_preferences)
-
-    hass.http.register_view(AnalyticsDevicesView)
+    async_at_started(hass, start_schedule)

    hass.data[DATA_COMPONENT] = analytics
    return True
@@ -109,7 +130,9 @@ def websocket_analytics(
    msg: dict[str, Any],
 ) -> None:
    """Return analytics preferences."""
-    analytics = hass.data[DATA_COMPONENT]
+    if (analytics := hass.data.get(DATA_COMPONENT)) is None:
+        connection.send_error(msg["id"], websocket_api.ERR_NOT_FOUND, "Not loaded")
+        return
    connection.send_result(
        msg["id"],
        {ATTR_PREFERENCES: analytics.preferences, ATTR_ONBOARDED: analytics.onboarded},
@@ -130,8 +153,10 @@ async def websocket_analytics_preferences(
    msg: dict[str, Any],
 ) -> None:
    """Update analytics preferences."""
+    if (analytics := hass.data.get(DATA_COMPONENT)) is None:
+        connection.send_error(msg["id"], websocket_api.ERR_NOT_FOUND, "Not loaded")
+        return
    preferences = msg[ATTR_PREFERENCES]
-    analytics = hass.data[DATA_COMPONENT]

    await analytics.save_preferences(preferences)
    await analytics.async_schedule()
@@ -299,12 +299,8 @@ class Analytics:
            self._data = AnalyticsData.from_dict(stored)

        if self.supervisor and not self.onboarded:
-            # This may raise HassioNotReadyError if Supervisor was unreachable
-            # during setup of the Supervisor integration. That will fail setup
-            # of this integration. However there is no better option at this time
-            # since we need to get the diagnostic setting from Supervisor to correctly
-            # setup this integration and we can't raise ConfigEntryNotReady to
-            # trigger a retry from async_setup.
+            # This may raise HassioNotReadyError if Supervisor was unreachable.
+            # The caller is responsible for handling this and triggering a retry.
            supervisor_info = hassio.get_supervisor_info(self._hass)

            # User have not configured analytics, get this setting from the supervisor
@@ -349,10 +345,10 @@ class Analytics:
            await self._save()

        if self.supervisor:
-            # get_supervisor_info was called during setup so we can't get here
-            # if it raised. The others may raise HassioNotReadyError if only some
-            # data was successfully fetched from Supervisor
-            supervisor_info = hassio.get_supervisor_info(hass)
+            # Try to pull Supervisor information, but don't fail if some or all
+            # of it is unavailable due to setup failures in the hassio integration.
+            with contextlib.suppress(hassio.HassioNotReadyError):
+                supervisor_info = hassio.get_supervisor_info(hass)
            with contextlib.suppress(hassio.HassioNotReadyError):
                operating_system_info = hassio.get_os_info(hass)
            with contextlib.suppress(hassio.HassioNotReadyError):
@@ -0,0 +1,19 @@
+"""Config flow for Analytics integration."""
+
+from typing import Any
+
+from homeassistant.config_entries import ConfigFlow, ConfigFlowResult
+
+from .const import DOMAIN
+
+
+class AnalyticsConfigFlow(ConfigFlow, domain=DOMAIN):
+    """Handle a config flow for Analytics."""
+
+    VERSION = 1
+
+    async def async_step_system(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle the initial step."""
+        return self.async_create_entry(title="Analytics", data={})
@@ -3,6 +3,7 @@
  "name": "Analytics",
  "after_dependencies": ["energy", "hassio", "recorder"],
  "codeowners": ["@home-assistant/core"],
+  "config_flow": true,
  "dependencies": ["api", "websocket_api", "http"],
  "documentation": "https://www.home-assistant.io/integrations/analytics",
  "integration_type": "system",
@@ -14,5 +15,6 @@
      "report_issue_url": "https://github.com/OHF-Device-Database/device-database/issues/new"
    }
  },
-  "quality_scale": "internal"
+  "quality_scale": "internal",
+  "single_config_entry": true
 }
@@ -1,4 +1,9 @@
 {
+  "exceptions": {
+    "supervisor_not_ready": {
+      "message": "Supervisor was not ready during setup, will retry"
+    }
+  },
  "preview_features": {
    "snapshots": {
      "description": "We're creating the [Open Home Foundation Device Database](https://www.home-assistant.io/blog/2026/02/02/about-device-database/): a free, open source community-powered resource to help users find practical information about how smart home devices perform in real installations.\n\nYou can help us build it by opting in to share anonymized data about your devices. This data will only ever include device-specific details (like model or manufacturer) – never personally identifying information (like the names you assign).\n\nFind out how we process your data (should you choose to contribute) in our [Data Use Statement](https://www.openhomefoundation.org/device-database-data-use-statement).",
@@ -4,7 +4,6 @@ import base64
 from collections import deque
 from collections.abc import AsyncIterator, Callable, Iterable
 from dataclasses import dataclass, field
-from datetime import UTC, datetime
 import json
 from mimetypes import guess_file_type
 from pathlib import Path
@@ -114,7 +113,7 @@ from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers import device_registry as dr, llm
 from homeassistant.helpers.json import json_dumps
 from homeassistant.helpers.update_coordinator import CoordinatorEntity
-from homeassistant.util import slugify
+from homeassistant.util import dt as dt_util, slugify
 from homeassistant.util.json import JsonArrayType, JsonObjectType

 from .const import (
@@ -372,7 +371,7 @@ def _convert_content(  # noqa: C901
                    )
                if (
                    content.native.container is not None
-                    and content.native.container.expires_at > datetime.now(UTC)
+                    and content.native.container.expires_at > dt_util.utcnow()
                ):
                    container_id = content.native.container.id

@@ -59,7 +59,6 @@ ATTR_EXTERNAL_URL = "external_url"
 ATTR_INTERNAL_URL = "internal_url"
 ATTR_LOCATION_NAME = "location_name"
 ATTR_INSTALLATION_TYPE = "installation_type"
-ATTR_REQUIRES_API_PASSWORD = "requires_api_password"
 ATTR_UUID = "uuid"
 ATTR_VERSION = "version"

@@ -222,7 +221,7 @@ class APIStatesView(HomeAssistantView):
            states = (
                state.as_dict_json
                for state in hass.states.async_all()
-                if entity_perm(state.entity_id, "read")
+                if entity_perm(state.entity_id, POLICY_READ)
            )
        response = web.Response(
            body=b"".join((b"[", b",".join(states), b"]")),
@@ -294,8 +293,10 @@ class APIEntityStateView(HomeAssistantView):

        # Read the state back for our response
        status_code = HTTPStatus.CREATED if is_new_state else HTTPStatus.OK
-        state = hass.states.get(entity_id)
-        assert state
+        if (state := hass.states.get(entity_id)) is None:
+            return self.json_message(
+                "Error storing state.", HTTPStatus.INTERNAL_SERVER_ERROR
+            )
        resp = self.json(state.as_dict(), status_code)

        resp.headers.add("Location", f"/api/states/{entity_id}")
@@ -38,11 +38,13 @@ from homeassistant.components.media_player import (
 )
 from homeassistant.const import CONF_NAME
 from homeassistant.core import HomeAssistant, callback
+from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from homeassistant.util import dt as dt_util

 from . import AppleTvConfigEntry, AppleTVManager
 from .browse_media import build_app_list
+from .const import DOMAIN
 from .entity import AppleTVEntity

 _LOGGER = logging.getLogger(__name__)
@@ -126,7 +128,6 @@ class AppleTvMediaPlayer(
    @callback
    def async_device_connected(self, atv: AppleTV) -> None:
        """Handle when connection is made to device."""
-        # NB: Do not use _is_feature_available here as it only works when playing
        if atv.features.in_state(FeatureState.Available, FeatureName.PushUpdates):
            atv.push_updater.listener = self
            atv.push_updater.start()
@@ -352,21 +353,41 @@ class AppleTvMediaPlayer(
                media_id = async_process_play_media_url(self.hass, play_item.url)
            media_type = MediaType.MUSIC

-        if self._is_feature_available(FeatureName.StreamFile) and (
+        use_stream_file = self._is_feature_available(FeatureName.StreamFile) and (
            media_type == MediaType.MUSIC or await is_streamable(media_id)
-        ):
-            _LOGGER.debug("Streaming %s via RAOP", media_id)
-            await self.atv.stream.stream_file(media_id)
-        elif self._is_feature_available(FeatureName.PlayUrl) and (
-            (parsed_url := URL(media_id)).is_absolute() and parsed_url.host
-        ):
-            _LOGGER.debug("Playing %s via AirPlay", media_id)
-            await self.atv.stream.play_url(media_id)
-        else:
-            _LOGGER.error(
-                "Media streaming is not possible with current configuration for %s",
-                media_id,
-            )
+        )
+
+        try:
+            if use_stream_file:
+                _LOGGER.debug("Streaming %s via RAOP", media_id)
+                await self.atv.stream.stream_file(media_id)
+            elif self._is_feature_available(FeatureName.PlayUrl) and (
+                (parsed_url := URL(media_id)).is_absolute() and parsed_url.host
+            ):
+                _LOGGER.debug("Playing %s via AirPlay", media_id)
+                await self.atv.stream.play_url(media_id)
+            else:
+                raise HomeAssistantError(
+                    translation_domain=DOMAIN,
+                    translation_key="streaming_not_supported",
+                )
+        except exceptions.NotSupportedError as ex:
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="streaming_not_supported",
+            ) from ex
+        except (
+            exceptions.BlockedStateError,
+            exceptions.ConnectionLostError,
+            exceptions.InvalidStateError,
+            exceptions.OperationTimeoutError,
+            exceptions.PlaybackError,
+            exceptions.ProtocolError,
+        ) as ex:
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="stream_failed",
+            ) from ex

    @property
    def media_image_hash(self) -> str | None:
@@ -460,7 +481,7 @@ class AppleTvMediaPlayer(

    def _is_feature_available(self, feature: FeatureName) -> bool:
        """Return if a feature is available."""
-        if self.atv and self._playing:
+        if self.atv:
            return self.atv.features.in_state(FeatureState.Available, feature)
        return False

@@ -81,6 +81,12 @@
    },
    "not_connected": {
      "message": "Apple TV is not connected"
+    },
+    "stream_failed": {
+      "message": "Failed to stream media to the Apple TV"
+    },
+    "streaming_not_supported": {
+      "message": "Streaming the requested media is not supported"
    }
  },
  "options": {
@@ -6,5 +6,5 @@
  "iot_class": "cloud_push",
  "loggers": ["apprise"],
  "quality_scale": "legacy",
-  "requirements": ["apprise==1.9.1"]
+  "requirements": ["apprise==1.11.0"]
 }
@@ -4,6 +4,7 @@
  "codeowners": [],
  "dependencies": ["mqtt"],
  "documentation": "https://www.home-assistant.io/integrations/arwn",
-  "iot_class": "local_polling",
-  "quality_scale": "legacy"
+  "iot_class": "local_push",
+  "quality_scale": "legacy",
+  "requirements": ["arwn-client==0.2.1"]
 }
@@ -3,113 +3,26 @@
 import logging
 from typing import Any

+from arwn_client import parse_message
+
 from homeassistant.components import mqtt
 from homeassistant.components.sensor import (
    SensorDeviceClass,
    SensorEntity,
    SensorStateClass,
 )
-from homeassistant.const import DEGREE, UnitOfPrecipitationDepth, UnitOfTemperature
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
 from homeassistant.helpers.typing import ConfigType, DiscoveryInfoType
-from homeassistant.util import slugify
 from homeassistant.util.json import json_loads_object

 _LOGGER = logging.getLogger(__name__)

 DOMAIN = "arwn"
-
 DATA_ARWN = "arwn"
 TOPIC = "arwn/#"


-def discover_sensors(topic: str, payload: dict[str, Any]) -> list[ArwnSensor] | None:
-    """Given a topic, dynamically create the right sensor type.
-
-    Async friendly.
-    """
-    parts = topic.split("/")
-    unit = payload.get("units", "")
-    domain = parts[1]
-    if domain == "temperature":
-        name = parts[2]
-        if unit == "F":
-            unit = UnitOfTemperature.FAHRENHEIT
-        else:
-            unit = UnitOfTemperature.CELSIUS
-        return [
-            ArwnSensor(
-                topic, name, "temp", unit, device_class=SensorDeviceClass.TEMPERATURE
-            )
-        ]
-    if domain == "moisture":
-        name = f"{parts[2]} Moisture"
-        return [ArwnSensor(topic, name, "moisture", unit, "mdi:water-percent")]
-    if domain == "rain":
-        if len(parts) >= 3 and parts[2] == "today":
-            return [
-                ArwnSensor(
-                    topic,
-                    "Rain Since Midnight",
-                    "since_midnight",
-                    UnitOfPrecipitationDepth.INCHES,
-                    device_class=SensorDeviceClass.PRECIPITATION,
-                )
-            ]
-        return [
-            ArwnSensor(
-                topic + "/total",
-                "Total Rainfall",
-                "total",
-                unit,
-                device_class=SensorDeviceClass.PRECIPITATION,
-            ),
-            ArwnSensor(
-                topic + "/rate",
-                "Rainfall Rate",
-                "rate",
-                unit,
-                device_class=SensorDeviceClass.PRECIPITATION,
-            ),
-        ]
-    if domain == "barometer":
-        return [
-            ArwnSensor(topic, "Barometer", "pressure", unit, "mdi:thermometer-lines")
-        ]
-    if domain == "wind":
-        return [
-            ArwnSensor(
-                topic + "/speed",
-                "Wind Speed",
-                "speed",
-                unit,
-                device_class=SensorDeviceClass.WIND_SPEED,
-            ),
-            ArwnSensor(
-                topic + "/gust",
-                "Wind Gust",
-                "gust",
-                unit,
-                device_class=SensorDeviceClass.WIND_SPEED,
-            ),
-            ArwnSensor(
-                topic + "/dir",
-                "Wind Direction",
-                "direction",
-                DEGREE,
-                "mdi:compass",
-                device_class=SensorDeviceClass.WIND_DIRECTION,
-                state_class=SensorStateClass.MEASUREMENT_ANGLE,
-            ),
-        ]
-    return None
-
-
-def _slug(name: str) -> str:
-    return f"sensor.arwn_{slugify(name)}"
-
-
 async def async_setup_platform(
    hass: HomeAssistant,
    config: ConfigType,
@@ -118,28 +31,25 @@ async def async_setup_platform(
 ) -> None:
    """Set up the ARWN platform."""

-    # Make sure MQTT integration is enabled and the client is available
    if not await mqtt.async_wait_for_mqtt_client(hass):
        _LOGGER.error("MQTT integration is not available")
        return

    @callback
    def async_sensor_event_received(msg: mqtt.ReceiveMessage) -> None:
-        """Process events as sensors.
+        """Process MQTT events as sensors."""
+        try:
+            event = json_loads_object(msg.payload)
+            device = parse_message(msg.topic, event)
+        except Exception:  # noqa: BLE001
+            _LOGGER.debug(
+                "Failed to parse ARWN message on topic %s",
+                msg.topic,
+                exc_info=True,
+            )
+            return

-        When a new event on our topic (arwn/#) is received we map it
-        into a known kind of sensor based on topic name. If we've
-        never seen this before, we keep this sensor around in a global
-        cache. If we have seen it before, we update the values of the
-        existing sensor. Either way, we push an ha state update at the
-        end for the new event we've seen.
-
-        This lets us dynamically incorporate sensors without any
-        configuration on our side.
-        """
-        event = json_loads_object(msg.payload)
-        sensors = discover_sensors(msg.topic, event)
-        if not sensors:
+        if device is None:
            return

        if (store := hass.data.get(DATA_ARWN)) is None:
@@ -148,22 +58,71 @@ async def async_setup_platform(
        if "timestamp" in event:
            del event["timestamp"]

-        for sensor in sensors:
-            if sensor.name not in store:
-                sensor.hass = hass
-                sensor.set_event(event)
-                store[sensor.name] = sensor
+        new_sensors: list[ArwnSensor] = []
+        for reading in device.readings:
+            if not reading.expose:
+                continue
+
+            unique_id = (
+                f"{msg.topic}/{reading.sensor_key}"
+                if len(device.readings) > 1
+                else msg.topic
+            )
+
+            try:
+                device_class = (
+                    SensorDeviceClass(reading.device_class)
+                    if reading.device_class
+                    else None
+                )
+            except ValueError:
+                _LOGGER.debug(
+                    "Unknown device_class=%s for sensor %s",
+                    reading.device_class,
+                    reading.sensor_name,
+                )
+                device_class = None
+
+            try:
+                state_class = (
+                    SensorStateClass(reading.state_class)
+                    if reading.state_class
+                    else None
+                )
+            except ValueError:
+                _LOGGER.debug(
+                    "Unknown state_class=%s for sensor %s",
+                    reading.state_class,
+                    reading.sensor_name,
+                )
+                state_class = None
+
+            if unique_id not in store:
+                sensor = ArwnSensor(
+                    unique_id=unique_id,
+                    name=reading.sensor_name,
+                    state_key=reading.sensor_key,
+                    units=reading.unit,
+                    icon=reading.icon,
+                    device_class=device_class,
+                    state_class=state_class,
+                    event=event,
+                )
+                store[unique_id] = sensor
                _LOGGER.debug(
                    "Registering sensor %(name)s => %(event)s",
-                    {"name": sensor.name, "event": event},
+                    {"name": reading.sensor_name, "event": event},
                )
-                async_add_entities((sensor,), True)
+                new_sensors.append(sensor)
            else:
                _LOGGER.debug(
                    "Recording sensor %(name)s => %(event)s",
-                    {"name": sensor.name, "event": event},
+                    {"name": reading.sensor_name, "event": event},
                )
-                store[sensor.name].set_event(event)
+                store[unique_id].set_event(event)
+
+        if new_sensors:
+            async_add_entities(new_sensors, True)

    await mqtt.async_subscribe(hass, TOPIC, async_sensor_event_received, 0)

@@ -175,29 +134,29 @@ class ArwnSensor(SensorEntity):

    def __init__(
        self,
-        topic: str,
+        unique_id: str,
        name: str,
        state_key: str,
        units: str,
        icon: str | None = None,
        device_class: SensorDeviceClass | None = None,
        state_class: SensorStateClass | None = None,
+        event: dict[str, Any] | None = None,
    ) -> None:
        """Initialize the sensor."""
-        self.entity_id = _slug(name)
        self._attr_name = name
-        # This mqtt topic for the sensor which is its uid
-        self._attr_unique_id = topic
+        self._attr_unique_id = unique_id
        self._state_key = state_key
        self._attr_native_unit_of_measurement = units
        self._attr_icon = icon
        self._attr_device_class = device_class
        self._attr_state_class = state_class
+        if event is not None:
+            self._attr_extra_state_attributes = dict(event)
+            self._attr_native_value = event.get(state_key)

    def set_event(self, event: dict[str, Any]) -> None:
        """Update the sensor with the most recent event."""
-        ev: dict[str, Any] = {}
-        ev.update(event)
-        self._attr_extra_state_attributes = ev
-        self._attr_native_value = ev.get(self._state_key)
+        self._attr_extra_state_attributes = dict(event)
+        self._attr_native_value = event.get(self._state_key)
        self.async_write_ha_state()
@@ -5,6 +5,8 @@ import logging
 from pathlib import Path
 from typing import Any

+from hassil.parse_expression import parse_sentence
+from hassil.parser import ParseError
 from hassil.util import (
    PUNCTUATION_END,
    PUNCTUATION_END_WORD,
@@ -164,6 +166,7 @@ async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
                            [cv.string],
                            has_one_non_empty_item,
                            has_no_punctuation,
+                            is_valid_sentence,
                        ),
                    }
                ],
@@ -212,6 +215,17 @@ def has_no_punctuation(value: list[str]) -> list[str]:
    return value


+def is_valid_sentence(value: list[str]) -> list[str]:
+    """Validate result can be parsed by hassil."""
+    for sentence in value:
+        try:
+            parse_sentence(sentence)
+        except ParseError as err:
+            raise vol.Invalid(f"invalid sentence: {err}") from err
+
+    return value
+
+
 def has_one_non_empty_item(value: list[str]) -> list[str]:
    """Validate result has at least one item."""
    if len(value) < 1:
@@ -6,5 +6,5 @@
  "documentation": "https://www.home-assistant.io/integrations/assist_satellite",
  "integration_type": "entity",
  "quality_scale": "internal",
-  "requirements": ["hassil==3.5.0"]
+  "requirements": ["hassil==3.6.0"]
 }
@@ -5,7 +5,7 @@
  fields:
    behavior:
      required: true
-      default: any
+      default: each
      selector:
        automation_behavior:
          mode: trigger
@@ -30,5 +30,5 @@
  "integration_type": "hub",
  "iot_class": "cloud_push",
  "loggers": ["pubnub", "yalexs"],
-  "requirements": ["yalexs==9.2.0", "yalexs-ble==3.3.0"]
+  "requirements": ["yalexs==9.2.7", "yalexs-ble==3.3.0"]
 }
@@ -2,12 +2,18 @@

 import avea

-from homeassistant.components.bluetooth import async_ble_device_from_address
+from homeassistant.components.bluetooth import (
+    BluetoothReachabilityIntent,
+    async_address_reachability_diagnostics,
+    async_ble_device_from_address,
+)
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import CONF_ADDRESS, Platform
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import ConfigEntryNotReady

+from .const import DOMAIN
+
 type AveaConfigEntry = ConfigEntry[avea.Bulb]

 PLATFORMS: list[Platform] = [Platform.LIGHT]
@@ -15,12 +21,20 @@ PLATFORMS: list[Platform] = [Platform.LIGHT]

 async def async_setup_entry(hass: HomeAssistant, entry: AveaConfigEntry) -> bool:
    """Set up Avea from a config entry."""
-    ble_device = async_ble_device_from_address(
-        hass, entry.data[CONF_ADDRESS], connectable=True
-    )
+    address = entry.data[CONF_ADDRESS]
+    ble_device = async_ble_device_from_address(hass, address, connectable=True)
    if not ble_device:
        raise ConfigEntryNotReady(
-            f"Could not find Avea device with address {entry.data[CONF_ADDRESS]}"
+            translation_domain=DOMAIN,
+            translation_key="device_not_found",
+            translation_placeholders={
+                "address": address,
+                "reason": async_address_reachability_diagnostics(
+                    hass,
+                    address.upper(),
+                    BluetoothReachabilityIntent.CONNECTION,
+                ),
+            },
        )

    entry.runtime_data = avea.Bulb(ble_device)
@@ -8,6 +8,7 @@ import avea
 from bleak.exc import BleakError
 import voluptuous as vol

+from homeassistant.components import bluetooth
 from homeassistant.components.bluetooth import (
    BluetoothServiceInfoBleak,
    async_discovered_service_info,
@@ -66,6 +67,15 @@ def _is_avea_discovery(discovery_info: BluetoothServiceInfoBleak) -> bool:
    return AVEA_SERVICE_UUID in discovery_info.service_uuids


+def _discovery_label(discovery_info: BluetoothServiceInfoBleak) -> str:
+    """Return a label for a discovered Avea bulb."""
+    if (
+        name := _normalize_name(discovery_info.name)
+    ) and name != discovery_info.address:
+        return f"{name} ({discovery_info.address})"
+    return discovery_info.address
+
+
 class AveaConfigFlow(ConfigFlow, domain=DOMAIN):
    """Handle a config flow for Avea."""

@@ -150,6 +160,7 @@ class AveaConfigFlow(ConfigFlow, domain=DOMAIN):
        if discovery := self._discovery_info:
            self._discovered_devices[discovery.address] = discovery
        else:
+            await bluetooth.async_request_active_scan(self.hass)
            current_addresses = self._async_current_ids(include_ignore=False)
            for discovery in async_discovered_service_info(self.hass):
                if (
@@ -165,11 +176,10 @@ class AveaConfigFlow(ConfigFlow, domain=DOMAIN):

        if self._discovery_info:
            disc = self._discovery_info
-            label = f"{disc.name or disc.address} ({disc.address})"
            data_schema = vol.Schema(
                {
                    vol.Required(CONF_ADDRESS, default=disc.address): vol.In(
-                        {disc.address: label}
+                        {disc.address: _discovery_label(disc)}
                    )
                }
            )
@@ -178,10 +188,7 @@ class AveaConfigFlow(ConfigFlow, domain=DOMAIN):
                {
                    vol.Required(CONF_ADDRESS): vol.In(
                        {
-                            service_info.address: (
-                                f"{service_info.name or service_info.address}"
-                                f" ({service_info.address})"
-                            )
+                            service_info.address: _discovery_label(service_info)
                            for service_info in self._discovered_devices.values()
                        }
                    ),
@@ -22,6 +22,11 @@
      }
    }
  },
+  "exceptions": {
+    "device_not_found": {
+      "message": "Could not find Avea device with address {address}: {reason}"
+    }
+  },
  "issues": {
    "deprecated_yaml": {
      "description": "[%key:component::homeassistant::issues::deprecated_yaml::description%]",
@@ -0,0 +1 @@
+"""Virtual integration: Avosdim."""
@@ -0,0 +1,6 @@
+{
+  "domain": "avosdim",
+  "name": "Avosdim",
+  "integration_type": "virtual",
+  "supported_by": "motion_blinds"
+}
@@ -51,7 +51,6 @@ async def async_setup_entry(hass: HomeAssistant, entry: S3ConfigEntry) -> bool:
                translation_key="invalid_bucket_name",
            ) from err
    except ValueError as err:
-        # pylint: disable-next=home-assistant-exception-translation-key-missing
        raise ConfigEntryError(
            translation_domain=DOMAIN,
            translation_key="invalid_endpoint_url",
@@ -7,7 +7,7 @@
      "cannot_connect": "[%key:component::aws_s3::exceptions::cannot_connect::message%]",
      "invalid_bucket_name": "[%key:component::aws_s3::exceptions::invalid_bucket_name::message%]",
      "invalid_credentials": "[%key:component::aws_s3::exceptions::invalid_credentials::message%]",
-      "invalid_endpoint_url": "Invalid endpoint URL. Please make sure it's a valid AWS S3 endpoint URL."
+      "invalid_endpoint_url": "[%key:component::aws_s3::exceptions::invalid_endpoint_url::message%]"
    },
    "step": {
      "user": {
@@ -48,6 +48,9 @@
    },
    "invalid_credentials": {
      "message": "Bucket cannot be accessed using provided combination of access key ID and secret access key."
+    },
+    "invalid_endpoint_url": {
+      "message": "Invalid endpoint URL. Please make sure it's a valid AWS S3 endpoint URL."
    }
  }
 }
@@ -11,7 +11,7 @@ from homeassistant.helpers.hassio import is_hassio

 from .agent import BackupAgent, LocalBackupAgent, OnProgressCallback
 from .const import DOMAIN, LOGGER
-from .models import AgentBackup, BackupNotFound
+from .models import AgentBackup, BackupNotFound, InvalidBackupFilename
 from .util import read_backup, suggested_filename


@@ -54,7 +54,13 @@ class CoreLocalBackupAgent(LocalBackupAgent):
            try:
                backup = read_backup(backup_path)
                backups[backup.backup_id] = (backup, backup_path)
-            except (OSError, TarError, json.JSONDecodeError, KeyError) as err:
+            except (
+                OSError,
+                TarError,
+                json.JSONDecodeError,
+                KeyError,
+                InvalidBackupFilename,
+            ) as err:
                LOGGER.warning("Unable to read backup %s: %s", backup_path, err)
        return backups

@@ -122,7 +128,14 @@ class CoreLocalBackupAgent(LocalBackupAgent):

    def get_new_backup_path(self, backup: AgentBackup) -> Path:
        """Return the local path to a new backup."""
-        return self._backup_dir / suggested_filename(backup)
+        candidate = self._backup_dir / suggested_filename(backup)
+        # suggested_filename does not strip separators; refuse paths that would
+        # land outside the backup directory.
+        if candidate.parent != self._backup_dir:
+            raise InvalidBackupFilename(
+                f"Refusing to write outside {self._backup_dir}: {candidate}"
+            )
+        return candidate

    async def async_delete_backup(self, backup_id: str, **kwargs: Any) -> None:
        """Delete a backup file."""
@@ -1978,7 +1978,13 @@ class CoreBackupReaderWriter(BackupReaderWriter):

        try:
            backup = await async_add_executor_job(read_backup, temp_file)
-        except (OSError, tarfile.TarError, json.JSONDecodeError, KeyError) as err:
+        except (
+            OSError,
+            tarfile.TarError,
+            json.JSONDecodeError,
+            KeyError,
+            InvalidBackupFilename,
+        ) as err:
            LOGGER.warning("Unable to parse backup %s: %s", temp_file, err)
            raise

@@ -6,7 +6,7 @@ import copy
 from dataclasses import dataclass, replace
 from io import BytesIO
 import json
-from pathlib import Path, PurePath
+from pathlib import Path, PurePath, PureWindowsPath
 from queue import SimpleQueue
 import tarfile
 import threading
@@ -34,7 +34,7 @@ from homeassistant.util.async_iterator import (
 from homeassistant.util.json import JsonObjectType, json_loads_object

 from .const import BUF_SIZE, LOGGER, SECURETAR_CREATE_VERSION
-from .models import AddonInfo, AgentBackup, Folder
+from .models import AddonInfo, AgentBackup, Folder, InvalidBackupFilename


 class DecryptError(HomeAssistantError):
@@ -109,6 +109,13 @@ def read_backup(backup_path: Path) -> AgentBackup:
        extra_metadata = cast(dict[str, bool | str], data.get("extra", {}))
        date = extra_metadata.get("supervisor.backup_request_date", data["date"])

+        name = cast(str, data["name"])
+        # The name is used to derive the on-disk filename via suggested_filename;
+        # reject anything that could escape the backup directory.
+        safe_name = PureWindowsPath(name).name
+        if safe_name != name or name in ("", ".", ".."):
+            raise InvalidBackupFilename(f"Invalid backup name: {name!r}")
+
        return AgentBackup(
            addons=addons,
            backup_id=cast(str, data["slug"]),
@@ -118,7 +125,7 @@ def read_backup(backup_path: Path) -> AgentBackup:
            folders=folders,
            homeassistant_included=homeassistant_included,
            homeassistant_version=homeassistant_version,
-            name=cast(str, data["name"]),
+            name=name,
            protected=cast(bool, data.get("protected", False)),
            size=backup_path.stat().st_size,
        )
@@ -1,7 +1,7 @@
 .trigger_common_fields:
  behavior: &trigger_behavior
    required: true
-    default: any
+    default: each
    selector:
      automation_behavior:
        mode: trigger
@@ -6,7 +6,6 @@ from blebox_uniapi.box import Box
 from blebox_uniapi.error import Error
 from blebox_uniapi.session import ApiHost

-from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
    CONF_HOST,
    CONF_PASSWORD,
@@ -18,10 +17,9 @@ from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import ConfigEntryNotReady

 from .const import DEFAULT_SETUP_TIMEOUT
+from .coordinator import BleBoxConfigEntry, BleBoxCoordinator
 from .helpers import get_maybe_authenticated_session

-type BleBoxConfigEntry = ConfigEntry[Box]
-
 _LOGGER = logging.getLogger(__name__)

 PLATFORMS = [
@@ -35,8 +33,6 @@ PLATFORMS = [
    Platform.UPDATE,
 ]

-PARALLEL_UPDATES = 0
-

 async def async_setup_entry(hass: HomeAssistant, entry: BleBoxConfigEntry) -> bool:
    """Set up BleBox devices from a config entry."""
@@ -58,7 +54,10 @@ async def async_setup_entry(hass: HomeAssistant, entry: BleBoxConfigEntry) -> bo
        _LOGGER.error("Identify failed at %s:%d (%s)", api_host.host, api_host.port, ex)
        raise ConfigEntryNotReady from ex

-    entry.runtime_data = product
+    coordinator = BleBoxCoordinator(hass, entry, product)
+    await coordinator.async_config_entry_first_refresh()
+
+    entry.runtime_data = coordinator

    await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)

@@ -11,13 +11,20 @@ from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity

+PARALLEL_UPDATES = 0
+
 BINARY_SENSOR_TYPES = (
    BinarySensorEntityDescription(
        key="moisture",
        device_class=BinarySensorDeviceClass.MOISTURE,
    ),
+    BinarySensorEntityDescription(
+        key="open",
+        device_class=BinarySensorDeviceClass.WINDOW,
+    ),
 )


@@ -27,23 +34,27 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxBinarySensorEntity(feature, description)
-        for feature in config_entry.runtime_data.features.get("binary_sensors", [])
+        BleBoxBinarySensorEntity(coordinator, feature, description)
+        for feature in coordinator.box.features.get("binary_sensors", [])
        for description in BINARY_SENSOR_TYPES
        if description.key == feature.device_class
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxBinarySensorEntity(BleBoxEntity[BinarySensorFeature], BinarySensorEntity):
    """Representation of a BleBox binary sensor feature."""

    def __init__(
-        self, feature: BinarySensorFeature, description: BinarySensorEntityDescription
+        self,
+        coordinator: BleBoxCoordinator,
+        feature: BinarySensorFeature,
+        description: BinarySensorEntityDescription,
    ) -> None:
        """Initialize a BleBox binary sensor feature."""
-        super().__init__(feature)
+        super().__init__(coordinator, feature)
        self.entity_description = description

    @property
@@ -2,12 +2,26 @@

 import blebox_uniapi.button

-from homeassistant.components.button import ButtonEntity
+from homeassistant.components.button import ButtonEntity, ButtonEntityDescription
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity
+from .util import blebox_command
+
+PARALLEL_UPDATES = 1
+
+BUTTON_TYPES: dict[str, ButtonEntityDescription] = {
+    "up": ButtonEntityDescription(key="up", translation_key="up"),
+    "down": ButtonEntityDescription(key="down", translation_key="down"),
+    "fav": ButtonEntityDescription(key="fav", translation_key="fav"),
+    "open": ButtonEntityDescription(key="open", translation_key="open"),
+    "close": ButtonEntityDescription(key="close", translation_key="close"),
+}
+
+_DEFAULT_BUTTON = ButtonEntityDescription(key="button")


 async def async_setup_entry(
@@ -16,35 +30,33 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox button entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxButtonEntity(feature)
-        for feature in config_entry.runtime_data.features.get("buttons", [])
+        BleBoxButtonEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("buttons", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxButtonEntity(BleBoxEntity[blebox_uniapi.button.Button], ButtonEntity):
    """Representation of BleBox buttons."""

-    def __init__(self, feature: blebox_uniapi.button.Button) -> None:
+    def __init__(
+        self, coordinator: BleBoxCoordinator, feature: blebox_uniapi.button.Button
+    ) -> None:
        """Initialize a BleBox button feature."""
-        super().__init__(feature)
-        self._attr_icon = self.get_icon()

-    def get_icon(self) -> str | None:
-        """Return icon for endpoint."""
-        if "up" in self._feature.query_string:
-            return "mdi:arrow-up-circle"
-        if "down" in self._feature.query_string:
-            return "mdi:arrow-down-circle"
-        if "fav" in self._feature.query_string:
-            return "mdi:heart-circle"
-        if "open" in self._feature.query_string:
-            return "mdi:arrow-up-circle"
-        if "close" in self._feature.query_string:
-            return "mdi:arrow-down-circle"
-        return None
+        super().__init__(coordinator, feature)
+        self.entity_description = self._get_description()

+    def _get_description(self) -> ButtonEntityDescription:
+        """Return the description matching this button's query string."""
+        for key, description in BUTTON_TYPES.items():
+            if key in self._feature.query_string:
+                return description
+        return _DEFAULT_BUTTON
+
+    @blebox_command
    async def async_press(self) -> None:
        """Handle the button press."""
        await self._feature.set()
@@ -1,6 +1,5 @@
 """BleBox climate entity."""

-from datetime import timedelta
 from typing import Any

 import blebox_uniapi.climate
@@ -17,8 +16,9 @@ from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
 from .entity import BleBoxEntity
+from .util import blebox_command

-SCAN_INTERVAL = timedelta(seconds=5)
+PARALLEL_UPDATES = 1

 BLEBOX_TO_HVACMODE = {
    0: HVACMode.OFF,
@@ -40,11 +40,12 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox climate entity."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxClimateEntity(feature)
-        for feature in config_entry.runtime_data.features.get("climates", [])
+        BleBoxClimateEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("climates", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxClimateEntity(BleBoxEntity[blebox_uniapi.climate.Climate], ClimateEntity):
@@ -108,6 +109,7 @@ class BleBoxClimateEntity(BleBoxEntity[blebox_uniapi.climate.Climate], ClimateEn
        """Return the desired thermostat temperature."""
        return self._feature.desired

+    @blebox_command
    async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
        """Set the climate entity mode."""
        if hvac_mode in [HVACMode.HEAT, HVACMode.COOL]:
@@ -116,6 +118,7 @@ class BleBoxClimateEntity(BleBoxEntity[blebox_uniapi.climate.Climate], ClimateEn

        await self._feature.async_off()

+    @blebox_command
    async def async_set_temperature(self, **kwargs: Any) -> None:
        """Set the thermostat temperature."""
        value = kwargs[ATTR_TEMPERATURE]
@@ -33,23 +33,14 @@ from .const import (
 _LOGGER = logging.getLogger(__name__)


-def create_schema(previous_input=None):
-    """Create a schema with given values as default."""
-    if previous_input is not None:
-        host = previous_input[CONF_HOST]
-        port = previous_input[CONF_PORT]
-    else:
-        host = DEFAULT_HOST
-        port = DEFAULT_PORT
-
-    return vol.Schema(
-        {
-            vol.Required(CONF_HOST, default=host): str,
-            vol.Required(CONF_PORT, default=port): int,
-            vol.Inclusive(CONF_USERNAME, "auth"): str,
-            vol.Inclusive(CONF_PASSWORD, "auth"): str,
-        }
-    )
+STEP_SCHEMA = vol.Schema(
+    {
+        vol.Required(CONF_HOST, default=DEFAULT_HOST): str,
+        vol.Required(CONF_PORT, default=DEFAULT_PORT): int,
+        vol.Inclusive(CONF_USERNAME, "auth"): str,
+        vol.Inclusive(CONF_PASSWORD, "auth"): str,
+    }
+)


 LOG_MSG = {
@@ -69,18 +60,44 @@ class BleBoxConfigFlow(ConfigFlow, domain=DOMAIN):
        self.device_config: dict[str, Any] = {}

    def handle_step_exception(
-        self, step, exception, schema, host, port, message_id, log_fn
+        self, exception, schema, host, port, message_id, log_fn, step_id
    ):
        """Handle step exceptions."""
        log_fn("%s at %s:%d (%s)", LOG_MSG[message_id], host, port, exception)

        return self.async_show_form(
-            step_id="user",
+            step_id=step_id,
            data_schema=schema,
            errors={"base": message_id},
            description_placeholders={"address": f"{host}:{port}"},
        )

+    async def _async_from_host_or_form(
+        self, api_host: ApiHost, user_input: dict[str, Any], step_id: str
+    ) -> tuple[Box, None] | tuple[None, ConfigFlowResult]:
+        """Try to connect to the device; return product or an error form."""
+        schema = self.add_suggested_values_to_schema(STEP_SCHEMA, user_input)
+        host = user_input[CONF_HOST]
+        port = user_input[CONF_PORT]
+        try:
+            return await Box.async_from_host(api_host), None
+        except UnsupportedBoxVersion as ex:
+            return None, self.handle_step_exception(
+                ex, schema, host, port, UNSUPPORTED_VERSION, _LOGGER.debug, step_id
+            )
+        except UnauthorizedRequest as ex:
+            return None, self.handle_step_exception(
+                ex, schema, host, port, CANNOT_CONNECT, _LOGGER.error, step_id
+            )
+        except Error as ex:
+            return None, self.handle_step_exception(
+                ex, schema, host, port, CANNOT_CONNECT, _LOGGER.warning, step_id
+            )
+        except RuntimeError as ex:
+            return None, self.handle_step_exception(
+                ex, schema, host, port, UNKNOWN, _LOGGER.error, step_id
+            )
+
    async def async_step_zeroconf(
        self, discovery_info: ZeroconfServiceInfo
    ) -> ConfigFlowResult:
@@ -145,12 +162,11 @@ class BleBoxConfigFlow(ConfigFlow, domain=DOMAIN):
    ) -> ConfigFlowResult:
        """Handle initial user-triggered config step."""
        hass = self.hass
-        schema = create_schema(user_input)

        if user_input is None:
            return self.async_show_form(
                step_id="user",
-                data_schema=schema,
+                data_schema=STEP_SCHEMA,
                errors={},
                description_placeholders={},
            )
@@ -173,36 +189,60 @@ class BleBoxConfigFlow(ConfigFlow, domain=DOMAIN):
        api_host = ApiHost(
            host, port, DEFAULT_SETUP_TIMEOUT, websession, hass.loop, _LOGGER
        )
-        try:
-            product = await Box.async_from_host(api_host)
-
-        except UnsupportedBoxVersion as ex:
-            return self.handle_step_exception(
-                "user",
-                ex,
-                schema,
-                host,
-                port,
-                UNSUPPORTED_VERSION,
-                _LOGGER.debug,
-            )
-        except UnauthorizedRequest as ex:
-            return self.handle_step_exception(
-                "user", ex, schema, host, port, CANNOT_CONNECT, _LOGGER.error
-            )
-
-        except Error as ex:
-            return self.handle_step_exception(
-                "user", ex, schema, host, port, CANNOT_CONNECT, _LOGGER.warning
-            )
-
-        except RuntimeError as ex:
-            return self.handle_step_exception(
-                "user", ex, schema, host, port, UNKNOWN, _LOGGER.error
-            )
+        product, error = await self._async_from_host_or_form(
+            api_host, user_input, step_id="user"
+        )
+        if error is not None:
+            return error
+        assert product is not None

        # Check if configured but IP changed since
        await self.async_set_unique_id(product.unique_id, raise_on_progress=False)
        self._abort_if_unique_id_configured()

        return self.async_create_entry(title=product.name, data=user_input)
+
+    async def async_step_reconfigure(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle reconfiguration of a BleBox device."""
+        reconfigure_entry = self._get_reconfigure_entry()
+
+        if user_input is None:
+            return self.async_show_form(
+                step_id="reconfigure",
+                data_schema=self.add_suggested_values_to_schema(
+                    STEP_SCHEMA, reconfigure_entry.data
+                ),
+            )
+
+        host = user_input[CONF_HOST]
+        port = user_input[CONF_PORT]
+
+        username = user_input.get(CONF_USERNAME)
+        password = user_input.get(CONF_PASSWORD)
+        websession = get_maybe_authenticated_session(self.hass, password, username)
+        api_host = ApiHost(
+            host, port, DEFAULT_SETUP_TIMEOUT, websession, self.hass.loop, _LOGGER
+        )
+
+        product, error = await self._async_from_host_or_form(
+            api_host, user_input, step_id="reconfigure"
+        )
+        if error is not None:
+            return error
+        assert product is not None
+
+        await self.async_set_unique_id(product.unique_id, raise_on_progress=False)
+        self._abort_if_unique_id_mismatch()
+
+        data_updates: dict[str, Any] = {CONF_HOST: host, CONF_PORT: port}
+        if username is not None:
+            data_updates[CONF_USERNAME] = username
+        if password is not None:
+            data_updates[CONF_PASSWORD] = password
+
+        return self.async_update_reload_and_abort(
+            reconfigure_entry,
+            data_updates=data_updates,
+        )
@@ -14,6 +14,13 @@ UNKNOWN = "unknown"
 DEFAULT_HOST = "192.168.0.2"
 DEFAULT_PORT = 80

+OPEN_STATUS: dict[int, str] = {
+    0: "open",
+    1: "unclosed_or_unlocked",
+    2: "ajar",
+    3: "closed_but_unlocked",
+    4: "closed",
+}

 LIGHT_MAX_KELVINS = 6500  # 154 Mireds
 LIGHT_MIN_KELVINS = 2700  # 370 Mireds
@@ -0,0 +1,48 @@
+"""DataUpdateCoordinator for BleBox devices."""
+
+from datetime import timedelta
+import logging
+
+from blebox_uniapi.box import Box
+from blebox_uniapi.error import Error
+
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
+
+from .const import DOMAIN
+
+_LOGGER = logging.getLogger(__name__)
+
+
+type BleBoxConfigEntry = ConfigEntry[BleBoxCoordinator]
+
+
+class BleBoxCoordinator(DataUpdateCoordinator[None]):
+    """Coordinator for a single BleBox device."""
+
+    config_entry: BleBoxConfigEntry
+
+    def __init__(
+        self, hass: HomeAssistant, config_entry: BleBoxConfigEntry, box: Box
+    ) -> None:
+        """Initialize the coordinator."""
+        super().__init__(
+            hass,
+            _LOGGER,
+            config_entry=config_entry,
+            name=DOMAIN,
+            update_interval=timedelta(seconds=5),
+        )
+        self.box = box
+
+    async def _async_update_data(self) -> None:
+        """Fetch data from the BleBox device."""
+        try:
+            await self.box.async_update_data()
+        except Error as err:
+            raise UpdateFailed(
+                translation_domain=DOMAIN,
+                translation_key="data_update_failed",
+                translation_placeholders={"error": str(err)},
+            ) from err
@@ -17,7 +17,11 @@ from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity
+from .util import blebox_command
+
+PARALLEL_UPDATES = 1

 BLEBOX_TO_COVER_DEVICE_CLASSES = {
    "gate": CoverDeviceClass.GATE,
@@ -59,19 +63,22 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxCoverEntity(feature)
-        for feature in config_entry.runtime_data.features.get("covers", [])
+        BleBoxCoverEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("covers", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxCoverEntity(BleBoxEntity[blebox_uniapi.cover.Cover], CoverEntity):
    """Representation of a BleBox cover feature."""

-    def __init__(self, feature: blebox_uniapi.cover.Cover) -> None:
+    def __init__(
+        self, coordinator: BleBoxCoordinator, feature: blebox_uniapi.cover.Cover
+    ) -> None:
        """Initialize a BleBox cover feature."""
-        super().__init__(feature)
+        super().__init__(coordinator, feature)
        self._attr_supported_features = (
            CoverEntityFeature.OPEN | CoverEntityFeature.CLOSE
        )
@@ -135,33 +142,40 @@ class BleBoxCoverEntity(BleBoxEntity[blebox_uniapi.cover.Cover], CoverEntity):
        """Return whether cover is closed."""
        return self._is_state(CoverState.CLOSED)

+    @blebox_command
    async def async_open_cover(self, **kwargs: Any) -> None:
        """Fully open the cover position."""
        await self._feature.async_open()

+    @blebox_command
    async def async_close_cover(self, **kwargs: Any) -> None:
        """Fully close the cover position."""
        await self._feature.async_close()

+    @blebox_command
    async def async_open_cover_tilt(self, **kwargs: Any) -> None:
        """Fully open the cover tilt."""
        position = 50 if self._feature.is_tilt_180 else 0
        await self._feature.async_set_tilt_position(position)

+    @blebox_command
    async def async_close_cover_tilt(self, **kwargs: Any) -> None:
        """Fully close the cover tilt."""
        # note: values are reversed
        await self._feature.async_set_tilt_position(100)

+    @blebox_command
    async def async_set_cover_position(self, **kwargs: Any) -> None:
        """Set the cover position."""
        position = kwargs[ATTR_POSITION]
        await self._feature.async_set_position(100 - position)

+    @blebox_command
    async def async_stop_cover(self, **kwargs: Any) -> None:
        """Stop the cover."""
        await self._feature.async_stop()

+    @blebox_command
    async def async_set_cover_tilt_position(self, **kwargs: Any) -> None:
        """Set the tilt position."""
        position = kwargs[ATTR_TILT_POSITION]
@@ -0,0 +1,33 @@
+"""Diagnostics support for BleBox devices."""
+
+from typing import Any
+
+from homeassistant.components.diagnostics import async_redact_data
+from homeassistant.const import CONF_PASSWORD, CONF_USERNAME
+from homeassistant.core import HomeAssistant
+
+from . import BleBoxConfigEntry
+
+TO_REDACT = {CONF_PASSWORD, CONF_USERNAME}
+
+
+async def async_get_config_entry_diagnostics(
+    hass: HomeAssistant, entry: BleBoxConfigEntry
+) -> dict[str, Any]:
+    """Return diagnostics for a config entry."""
+    product = entry.runtime_data.box
+
+    return {
+        "entry": async_redact_data(entry.as_dict(), TO_REDACT),
+        "device": {
+            "name": product.name,
+            "type": product.type,
+            "model": product.model,
+            "unique_id": product.unique_id,
+            "firmware_version": product.firmware_version,
+            "hardware_version": product.hardware_version,
+            "available_firmware_version": product.available_firmware_version,
+            "api_version": product.api_version,
+            "last_data": product.last_data,
+        },
+    }
@@ -1,23 +1,20 @@
 """Base entity for the BleBox devices integration."""

-import logging
-
-from blebox_uniapi.error import Error
 from blebox_uniapi.feature import Feature

 from homeassistant.helpers.device_registry import DeviceInfo
-from homeassistant.helpers.entity import Entity
+from homeassistant.helpers.update_coordinator import CoordinatorEntity

 from .const import DOMAIN
-
-_LOGGER = logging.getLogger(__name__)
+from .coordinator import BleBoxCoordinator


-class BleBoxEntity[_FeatureT: Feature](Entity):
+class BleBoxEntity[_FeatureT: Feature](CoordinatorEntity[BleBoxCoordinator]):
    """Implements a common class for entities representing a BleBox feature."""

-    def __init__(self, feature: _FeatureT) -> None:
+    def __init__(self, coordinator: BleBoxCoordinator, feature: _FeatureT) -> None:
        """Initialize a BleBox entity."""
+        super().__init__(coordinator)
        self._feature = feature
        self._attr_name = feature.full_name
        self._attr_unique_id = feature.unique_id
@@ -30,10 +27,3 @@ class BleBoxEntity[_FeatureT: Feature](Entity):
            sw_version=product.firmware_version,
            configuration_url=f"http://{product.address}",
        )
-
-    async def async_update(self) -> None:
-        """Update the entity state."""
-        try:
-            await self._feature.async_update()
-        except Error as ex:
-            _LOGGER.error("Updating '%s' failed: %s", self.name, ex)
@@ -0,0 +1,26 @@
+{
+  "entity": {
+    "button": {
+      "close": {
+        "default": "mdi:arrow-down-circle"
+      },
+      "down": {
+        "default": "mdi:arrow-down-circle"
+      },
+      "fav": {
+        "default": "mdi:heart-circle"
+      },
+      "open": {
+        "default": "mdi:arrow-up-circle"
+      },
+      "up": {
+        "default": "mdi:arrow-up-circle"
+      }
+    },
+    "sensor": {
+      "power_consumption": {
+        "default": "mdi:lightning-bolt"
+      }
+    }
+  }
+}
@@ -1,6 +1,5 @@
 """BleBox light entities implementation."""

-from datetime import timedelta
 import logging
 import math
 from typing import Any
@@ -20,15 +19,18 @@ from homeassistant.components.light import (
    LightEntityFeature,
 )
 from homeassistant.core import HomeAssistant
+from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
-from .const import LIGHT_MAX_KELVINS, LIGHT_MIN_KELVINS
+from .const import DOMAIN, LIGHT_MAX_KELVINS, LIGHT_MIN_KELVINS
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity
+from .util import blebox_command

 _LOGGER = logging.getLogger(__name__)

-SCAN_INTERVAL = timedelta(seconds=5)
+PARALLEL_UPDATES = 1


 async def async_setup_entry(
@@ -37,11 +39,12 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxLightEntity(feature)
-        for feature in config_entry.runtime_data.features.get("lights", [])
+        BleBoxLightEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("lights", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 COLOR_MODE_MAP = {
@@ -61,9 +64,11 @@ class BleBoxLightEntity(BleBoxEntity[blebox_uniapi.light.Light], LightEntity):
    _attr_min_color_temp_kelvin = LIGHT_MIN_KELVINS
    _attr_max_color_temp_kelvin = LIGHT_MAX_KELVINS

-    def __init__(self, feature: blebox_uniapi.light.Light) -> None:
+    def __init__(
+        self, coordinator: BleBoxCoordinator, feature: blebox_uniapi.light.Light
+    ) -> None:
        """Initialize a BleBox light."""
-        super().__init__(feature)
+        super().__init__(coordinator, feature)
        if feature.effect_list:
            self._attr_supported_features = LightEntityFeature.EFFECT

@@ -165,6 +170,7 @@ class BleBoxLightEntity(BleBoxEntity[blebox_uniapi.light.Light], LightEntity):
            return None
        return tuple(blebox_uniapi.light.Light.rgb_hex_to_rgb_list(rgbww_hex))

+    @blebox_command
    async def async_turn_on(self, **kwargs: Any) -> None:
        """Turn the light on."""

@@ -210,8 +216,10 @@ class BleBoxLightEntity(BleBoxEntity[blebox_uniapi.light.Light], LightEntity):
        try:
            await self._feature.async_on(value)
        except ValueError as exc:
-            raise ValueError(
-                f"Turning on '{self.name}' failed: Bad value {value}"
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="bad_value",
+                translation_placeholders={"error": str(exc)},
            ) from exc

        if effect is not None:
@@ -219,11 +227,13 @@ class BleBoxLightEntity(BleBoxEntity[blebox_uniapi.light.Light], LightEntity):
                effect_value = self.effect_list.index(effect)
                await self._feature.async_api_command("effect", effect_value)
            except ValueError as exc:
-                raise ValueError(
-                    f"Turning on with effect '{self.name}' failed: {effect} not in"
-                    " effect list."
+                raise HomeAssistantError(
+                    translation_domain=DOMAIN,
+                    translation_key="effect_not_found",
+                    translation_placeholders={"error": str(exc)},
                ) from exc

+    @blebox_command
    async def async_turn_off(self, **kwargs: Any) -> None:
        """Turn the light off."""
        await self._feature.async_off()
@@ -1,6 +1,8 @@
 """BleBox sensor entities."""

-from datetime import datetime, timedelta
+from collections.abc import Callable
+from dataclasses import dataclass
+from datetime import datetime

 import blebox_uniapi.sensor

@@ -26,95 +28,113 @@ from homeassistant.const import (
 )
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
+from homeassistant.helpers.typing import StateType

 from . import BleBoxConfigEntry
+from .const import OPEN_STATUS
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity

-SCAN_INTERVAL = timedelta(seconds=5)
+PARALLEL_UPDATES = 0


-SENSOR_TYPES = (
-    SensorEntityDescription(
+@dataclass(kw_only=True, frozen=True)
+class BleBoxSensorEntityDescription(SensorEntityDescription):
+    """Describes a BleBox sensor entity."""
+
+    value_fn: Callable[[StateType], StateType] = lambda v: v
+
+
+SENSOR_TYPES: tuple[BleBoxSensorEntityDescription, ...] = (
+    BleBoxSensorEntityDescription(
        key="pm1",
        device_class=SensorDeviceClass.PM1,
        native_unit_of_measurement=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="pm2_5",
        device_class=SensorDeviceClass.PM25,
        native_unit_of_measurement=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="pm10",
        device_class=SensorDeviceClass.PM10,
        native_unit_of_measurement=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="temperature",
        device_class=SensorDeviceClass.TEMPERATURE,
        native_unit_of_measurement=UnitOfTemperature.CELSIUS,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="powerConsumption",
+        translation_key="power_consumption",
        native_unit_of_measurement=UnitOfEnergy.KILO_WATT_HOUR,
        suggested_display_precision=2,
-        icon="mdi:lightning-bolt",
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="humidity",
        device_class=SensorDeviceClass.HUMIDITY,
        native_unit_of_measurement=PERCENTAGE,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="wind",
        device_class=SensorDeviceClass.WIND_SPEED,
        native_unit_of_measurement=UnitOfSpeed.METERS_PER_SECOND,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="illuminance",
        device_class=SensorDeviceClass.ILLUMINANCE,
        native_unit_of_measurement=LIGHT_LUX,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="forwardActiveEnergy",
        device_class=SensorDeviceClass.ENERGY,
        native_unit_of_measurement=UnitOfEnergy.KILO_WATT_HOUR,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="reverseActiveEnergy",
        device_class=SensorDeviceClass.ENERGY,
        native_unit_of_measurement=UnitOfEnergy.KILO_WATT_HOUR,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="reactivePower",
        device_class=SensorDeviceClass.POWER,
        native_unit_of_measurement=UnitOfReactivePower.VOLT_AMPERE_REACTIVE,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="activePower",
        device_class=SensorDeviceClass.POWER,
        native_unit_of_measurement=UnitOfPower.WATT,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="apparentPower",
        device_class=SensorDeviceClass.APPARENT_POWER,
        native_unit_of_measurement=UnitOfApparentPower.VOLT_AMPERE,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="voltage",
        device_class=SensorDeviceClass.VOLTAGE,
        native_unit_of_measurement=UnitOfElectricPotential.VOLT,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="current",
        device_class=SensorDeviceClass.CURRENT,
        native_unit_of_measurement=UnitOfElectricCurrent.MILLIAMPERE,
    ),
-    SensorEntityDescription(
+    BleBoxSensorEntityDescription(
        key="frequency",
        device_class=SensorDeviceClass.FREQUENCY,
        native_unit_of_measurement=UnitOfFrequency.HERTZ,
    ),
+    BleBoxSensorEntityDescription(
+        key="openStatus",
+        translation_key="open_status",
+        device_class=SensorDeviceClass.ENUM,
+        icon="mdi:window-open",
+        options=list(OPEN_STATUS.values()),
+        value_fn=lambda v: OPEN_STATUS.get(int(v)) if v is not None else None,
+    ),
 )


@@ -124,31 +144,35 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxSensorEntity(feature, description)
-        for feature in config_entry.runtime_data.features.get("sensors", [])
+        BleBoxSensorEntity(coordinator, feature, description)
+        for feature in coordinator.box.features.get("sensors", [])
        for description in SENSOR_TYPES
        if description.key == feature.device_class
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxSensorEntity(BleBoxEntity[blebox_uniapi.sensor.BaseSensor], SensorEntity):
    """Representation of a BleBox sensor feature."""

+    entity_description: BleBoxSensorEntityDescription
+
    def __init__(
        self,
+        coordinator: BleBoxCoordinator,
        feature: blebox_uniapi.sensor.BaseSensor,
-        description: SensorEntityDescription,
+        description: BleBoxSensorEntityDescription,
    ) -> None:
        """Initialize a BleBox sensor feature."""
-        super().__init__(feature)
+        super().__init__(coordinator, feature)
        self.entity_description = description

    @property
-    def native_value(self):
+    def native_value(self) -> StateType:
        """Return the state."""
-        return self._feature.native_value
+        return self.entity_description.value_fn(self._feature.native_value)

    @property
    def last_reset(self) -> datetime | None:
@@ -2,7 +2,9 @@
  "config": {
    "abort": {
      "address_already_configured": "A BleBox device is already configured at {address}.",
-      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
+      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
+      "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]",
+      "unique_id_mismatch": "The device identifier does not match the previously configured device."
    },
    "error": {
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
@@ -11,6 +13,16 @@
    },
    "flow_title": "{name} ({host})",
    "step": {
+      "reconfigure": {
+        "data": {
+          "host": "[%key:common::config_flow::data::ip%]",
+          "password": "[%key:common::config_flow::data::password%]",
+          "port": "[%key:common::config_flow::data::port%]",
+          "username": "[%key:common::config_flow::data::username%]"
+        },
+        "description": "Update the connection settings for your BleBox device.",
+        "title": "Reconfigure BleBox device"
+      },
      "user": {
        "data": {
          "host": "[%key:common::config_flow::data::ip%]",
@@ -22,5 +34,38 @@
        "title": "Set up your BleBox device"
      }
    }
+  },
+  "entity": {
+    "sensor": {
+      "open_status": {
+        "state": {
+          "ajar": "Ajar",
+          "closed": "[%key:common::state::closed%]",
+          "closed_but_unlocked": "Closed but unlocked",
+          "open": "[%key:common::state::open%]",
+          "unclosed_or_unlocked": "Unclosed or unlocked"
+        }
+      }
+    }
+  },
+  "exceptions": {
+    "bad_value": {
+      "message": "Turning on the light failed: {error}"
+    },
+    "command_failed": {
+      "message": "Failed to execute command on the BleBox device: {error}"
+    },
+    "data_update_failed": {
+      "message": "An error occurred while communicating with the BleBox device: {error}"
+    },
+    "effect_not_found": {
+      "message": "The specified light effect is not available on this device: {error}"
+    },
+    "install_failed": {
+      "message": "Failed to install firmware update on the BleBox device: {error}"
+    },
+    "update_failed": {
+      "message": "Failed to fetch firmware update information from the BleBox device: {error}"
+    }
  }
 }
@@ -1,6 +1,5 @@
 """BleBox switch implementation."""

-from datetime import timedelta
 from typing import Any

 import blebox_uniapi.switch
@@ -11,8 +10,9 @@ from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

 from . import BleBoxConfigEntry
 from .entity import BleBoxEntity
+from .util import blebox_command

-SCAN_INTERVAL = timedelta(seconds=5)
+PARALLEL_UPDATES = 1


 async def async_setup_entry(
@@ -21,11 +21,12 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox switch entity."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxSwitchEntity(feature)
-        for feature in config_entry.runtime_data.features.get("switches", [])
+        BleBoxSwitchEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("switches", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities)


 class BleBoxSwitchEntity(BleBoxEntity[blebox_uniapi.switch.Switch], SwitchEntity):
@@ -38,10 +39,12 @@ class BleBoxSwitchEntity(BleBoxEntity[blebox_uniapi.switch.Switch], SwitchEntity
        """Return whether switch is on."""
        return self._feature.is_on

+    @blebox_command
    async def async_turn_on(self, **kwargs: Any) -> None:
        """Turn on the switch."""
        await self._feature.async_turn_on()

+    @blebox_command
    async def async_turn_off(self, **kwargs: Any) -> None:
        """Turn off the switch."""
        await self._feature.async_turn_off()
@@ -18,8 +18,11 @@ from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from homeassistant.helpers.event import async_call_later

 from . import BleBoxConfigEntry
+from .const import DOMAIN
+from .coordinator import BleBoxCoordinator
 from .entity import BleBoxEntity

+PARALLEL_UPDATES = 0
 SCAN_INTERVAL = timedelta(hours=1)


@@ -33,11 +36,12 @@ async def async_setup_entry(
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up a BleBox update entry."""
+    coordinator = config_entry.runtime_data
    entities = [
-        BleBoxUpdateEntity(feature)
-        for feature in config_entry.runtime_data.features.get("updates", [])
+        BleBoxUpdateEntity(coordinator, feature)
+        for feature in coordinator.box.features.get("updates", [])
    ]
-    async_add_entities(entities, True)
+    async_add_entities(entities, update_before_add=True)


 class BleBoxUpdateEntity(BleBoxEntity[blebox_uniapi.update.Update], UpdateEntity):
@@ -48,9 +52,16 @@ class BleBoxUpdateEntity(BleBoxEntity[blebox_uniapi.update.Update], UpdateEntity
        UpdateEntityFeature.INSTALL | UpdateEntityFeature.PROGRESS
    )

-    def __init__(self, feature: blebox_uniapi.update.Update) -> None:
+    @property
+    def should_poll(self) -> bool:
+        """Return True because firmware versions cannot be fetched via coordinator."""
+        return True
+
+    def __init__(
+        self, coordinator: BleBoxCoordinator, feature: blebox_uniapi.update.Update
+    ) -> None:
        """Initialize the update entity."""
-        super().__init__(feature)
+        super().__init__(coordinator, feature)
        self._in_progress_old_version: str | None = None
        self._poll_cancel: CALLBACK_TYPE | None = None
        self._poll_attempts: int = 0
@@ -76,7 +87,11 @@ class BleBoxUpdateEntity(BleBoxEntity[blebox_uniapi.update.Update], UpdateEntity
        try:
            await self._feature.async_update()
        except Error as ex:
-            raise HomeAssistantError(ex) from ex
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="update_failed",
+                translation_placeholders={"error": str(ex)},
+            ) from ex
        self._sync_sw_version()

    @property
@@ -111,7 +126,11 @@ class BleBoxUpdateEntity(BleBoxEntity[blebox_uniapi.update.Update], UpdateEntity
            await self._feature.async_install()
        except Error as ex:
            self._reset_progress()
-            raise HomeAssistantError(ex) from ex
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="install_failed",
+                translation_placeholders={"error": str(ex)},
+            ) from ex
        self._poll_cancel = async_call_later(
            self.hass, _POLL_INTERVAL_SECONDS, self._poll_until_updated
        )
@@ -0,0 +1,34 @@
+"""Utilities for BleBox."""
+
+from collections.abc import Awaitable, Callable, Coroutine
+from typing import Any, Concatenate
+
+from blebox_uniapi.error import Error
+
+from homeassistant.exceptions import HomeAssistantError
+
+from .const import DOMAIN
+from .entity import BleBoxEntity
+
+
+def blebox_command[_BleBoxEntityT: BleBoxEntity, **_P, _R](
+    func: Callable[Concatenate[_BleBoxEntityT, _P], Awaitable[_R]],
+) -> Callable[Concatenate[_BleBoxEntityT, _P], Coroutine[Any, Any, _R]]:
+    """Decorate BleBox calls that send commands to the device.
+
+    Catches BleBox errors and refreshes the coordinator after the command.
+    """
+
+    async def handler(self: _BleBoxEntityT, *args: _P.args, **kwargs: _P.kwargs) -> _R:
+        try:
+            return await func(self, *args, **kwargs)
+        except Error as err:
+            raise HomeAssistantError(
+                translation_domain=DOMAIN,
+                translation_key="command_failed",
+                translation_placeholders={"error": str(err)},
+            ) from err
+        finally:
+            await self.coordinator.async_refresh()
+
+    return handler
@@ -27,6 +27,7 @@ from bluetooth_data_tools import monotonic_time_coarse as MONOTONIC_TIME
 from habluetooth import (
    BaseHaRemoteScanner,
    BaseHaScanner,
+    BluetoothReachabilityIntent,
    BluetoothScannerDevice,
    BluetoothScanningMode,
    HaBluetoothConnector,
@@ -55,6 +56,7 @@ from . import passive_update_processor, websocket_api
 from .api import (
    _get_manager,
    async_address_present,
+    async_address_reachability_diagnostics,
    async_ble_device_from_address,
    async_clear_address_from_match_history,
    async_clear_advertisement_history,
@@ -108,12 +110,14 @@ __all__ = [
    "BluetoothCallback",
    "BluetoothCallbackMatcher",
    "BluetoothChange",
+    "BluetoothReachabilityIntent",
    "BluetoothScannerDevice",
    "BluetoothScanningMode",
    "BluetoothServiceInfo",
    "BluetoothServiceInfoBleak",
    "HaBluetoothConnector",
    "async_address_present",
+    "async_address_reachability_diagnostics",
    "async_ble_device_from_address",
    "async_clear_address_from_match_history",
    "async_clear_advertisement_history",
@@ -6,11 +6,13 @@ These APIs are the only documented way to interact with the bluetooth integratio
 import asyncio
 from asyncio import Future
 from collections.abc import Callable, Iterable
+from contextlib import ExitStack
 from typing import TYPE_CHECKING, cast

 from bleak import BleakScanner
 from habluetooth import (
    BaseHaScanner,
+    BluetoothReachabilityIntent,
    BluetoothScannerDevice,
    BluetoothScanningMode,
    HaBleakScannerWrapper,
@@ -108,6 +110,14 @@ def async_ble_device_from_address(
    return _get_manager(hass).async_ble_device_from_address(address, connectable)


+@hass_callback
+def async_address_reachability_diagnostics(
+    hass: HomeAssistant, address: str, intent: BluetoothReachabilityIntent
+) -> str:
+    """Return a human readable explanation of why an address may be unreachable."""
+    return _get_manager(hass).async_address_reachability_diagnostics(address, intent)
+
+
@hass_callback
 def async_scanner_devices_by_address(
    hass: HomeAssistant, address: str, connectable: bool = True
@@ -169,15 +179,20 @@ async def async_process_advertisements(
        if not done.done() and callback(service_info):
            done.set_result(service_info)

-    unload = _get_manager(hass).async_register_callback(
-        _async_discovered_device, match_dict, mode, scan_duration=timeout
-    )
+    manager = _get_manager(hass)
+
+    with ExitStack() as stack:
+        unload = manager.async_register_callback(
+            _async_discovered_device, match_dict, mode
+        )
+        stack.callback(unload)
+
+        if mode == BluetoothScanningMode.ACTIVE:
+            task = hass.async_create_task(manager.async_request_active_scan(timeout))
+            stack.callback(task.cancel)

-    try:
        async with asyncio.timeout(timeout):
            return await done
-    finally:
-        unload()


@hass_callback
@@ -20,7 +20,7 @@
    "bluetooth-adapters==2.3.0",
    "bluetooth-auto-recovery==1.6.4",
    "bluetooth-data-tools==1.29.18",
-    "dbus-fast==5.0.14",
-    "habluetooth==6.7.4"
+    "dbus-fast==5.0.16",
+    "habluetooth==6.8.3"
  ]
 }
@@ -1,18 +1,19 @@
 """The Brands integration."""

 from collections import deque
+from collections.abc import Container, Mapping
 from http import HTTPStatus
 import logging
 from pathlib import Path
 from random import SystemRandom
 import time
-from typing import Any, Final
+from typing import Any, Final, override

-from aiohttp import ClientError, hdrs, web
+from aiohttp import ClientError, web
 import voluptuous as vol

 from homeassistant.components import websocket_api
-from homeassistant.components.http import KEY_AUTHENTICATED, HomeAssistantView
+from homeassistant.components.http import HomeAssistantView
 from homeassistant.core import HomeAssistant, callback, valid_domain
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
@@ -108,23 +109,18 @@ def _read_brand_file(brand_dir: Path, image: str) -> bytes | None:
 class _BrandsBaseView(HomeAssistantView):
    """Base view for serving brand images."""

-    requires_auth = False
+    use_query_token_for_auth = True

    def __init__(self, hass: HomeAssistant) -> None:
        """Initialize the view."""
        self._hass = hass
        self._cache_dir = Path(hass.config.cache_path(DOMAIN))

-    def _authenticate(self, request: web.Request) -> None:
-        """Authenticate the request using Bearer token or query token."""
-        access_tokens: deque[str] = self._hass.data[DOMAIN]
-        authenticated = (
-            request[KEY_AUTHENTICATED] or request.query.get("token") in access_tokens
-        )
-        if not authenticated:
-            if hdrs.AUTHORIZATION in request.headers:
-                raise web.HTTPUnauthorized
-            raise web.HTTPForbidden
+    @callback
+    @override
+    def get_valid_auth_tokens(self, match_info: Mapping[str, str]) -> Container[str]:
+        """Return valid auth tokens, which can be used for query token authentication."""
+        return self._hass.data[DOMAIN]

    async def _serve_from_custom_integration(
        self,
@@ -240,8 +236,6 @@ class BrandsIntegrationView(_BrandsBaseView):
        image: str,
    ) -> web.Response:
        """Handle GET request for an integration brand image."""
-        self._authenticate(request)
-
        if not valid_domain(domain) or image not in ALLOWED_IMAGES:
            return web.Response(status=HTTPStatus.NOT_FOUND)

@@ -274,8 +268,6 @@ class BrandsHardwareView(_BrandsBaseView):
        image: str,
    ) -> web.Response:
        """Handle GET request for a hardware brand image."""
-        self._authenticate(request)
-
        if not CATEGORY_RE.match(category):
            return web.Response(status=HTTPStatus.NOT_FOUND)
        # Hardware images have dynamic names like "manufacturer_model.png"
@@ -3,6 +3,7 @@
  "name": "Sony Bravia TV",
  "codeowners": ["@bieniu", "@Drafteed"],
  "config_flow": true,
+  "dependencies": ["ssdp"],
  "documentation": "https://www.home-assistant.io/integrations/braviatv",
  "integration_type": "device",
  "iot_class": "local_polling",
@@ -92,7 +92,7 @@ class BroadlinkRadioFrequency(BroadlinkEntity, RadioFrequencyTransmitterEntity):
    """Representation of a Broadlink RF transmitter."""

    _attr_has_entity_name = True
-    _attr_name = None
+    _attr_translation_key = "rf_transmitter"

    def __init__(self, device: BroadlinkDevice) -> None:
        """Initialize the entity."""
@@ -54,6 +54,11 @@
        "name": "IR emitter"
      }
    },
+    "radio_frequency": {
+      "rf_transmitter": {
+        "name": "RF transmitter"
+      }
+    },
    "select": {
      "day_of_week": {
        "name": "Day of week",
@@ -3,6 +3,7 @@
 import logging

 import caldav
+from caldav.lib.error import DAVError

 from homeassistant.core import HomeAssistant

@@ -26,7 +27,7 @@ async def async_get_calendars(
        for calendar in client.principal().calendars():
            try:
                supported_components = calendar.get_supported_components()
-            except KeyError:
+            except KeyError, DAVError:
                needs_warning.append((str(calendar.url), calendar.name, component))

                if component in ASSUMED_COMPONENTS:
@@ -8,6 +8,6 @@
  "iot_class": "local_push",
  "loggers": ["aiostreammagic"],
  "quality_scale": "platinum",
-  "requirements": ["aiostreammagic==2.13.1"],
+  "requirements": ["aiostreammagic==2.13.2"],
  "zeroconf": ["_stream-magic._tcp.local.", "_smoip._tcp.local."]
 }
@@ -2,7 +2,7 @@

 import asyncio
 import collections
-from collections.abc import Awaitable, Callable, Coroutine
+from collections.abc import Awaitable, Callable, Container, Coroutine, Mapping
 from contextlib import suppress
 from dataclasses import asdict, dataclass
 from datetime import datetime, timedelta
@@ -12,16 +12,16 @@ import logging
 import os
 from random import SystemRandom
 import time
-from typing import Any, Final, final
+from typing import Any, Final, final, override

-from aiohttp import hdrs, web
+from aiohttp import web
 import attr
 from propcache.api import cached_property, under_cached_property
 import voluptuous as vol
 from webrtc_models import RTCIceCandidateInit

 from homeassistant.components import websocket_api
-from homeassistant.components.http import KEY_AUTHENTICATED, HomeAssistantView
+from homeassistant.components.http import HomeAssistantView
 from homeassistant.components.media_player import (
    ATTR_MEDIA_CONTENT_ID,
    ATTR_MEDIA_CONTENT_TYPE,
@@ -776,30 +776,26 @@ class Camera(Entity, cached_properties=CACHED_PROPERTIES_WITH_ATTR_):
 class CameraView(HomeAssistantView):
    """Base CameraView."""

-    requires_auth = False
+    use_query_token_for_auth = True

    def __init__(self, component: EntityComponent[Camera]) -> None:
        """Initialize a basic camera view."""
        self.component = component

+    @callback
+    @override
+    def get_valid_auth_tokens(self, match_info: Mapping[str, str]) -> Container[str]:
+        """Return valid auth tokens, which can be used for query token authentication."""
+        if (camera := self.component.get_entity(match_info["entity_id"])) is None:
+            return ()
+
+        return camera.access_tokens
+
    async def get(self, request: web.Request, entity_id: str) -> web.StreamResponse:
        """Start a GET request."""
        if (camera := self.component.get_entity(entity_id)) is None:
            raise web.HTTPNotFound

-        authenticated = (
-            request[KEY_AUTHENTICATED]
-            or request.query.get("token") in camera.access_tokens
-        )
-
-        if not authenticated:
-            # Attempt with invalid bearer token, raise unauthorized
-            # so ban middleware can handle it.
-            if hdrs.AUTHORIZATION in request.headers:
-                raise web.HTTPUnauthorized
-            # Invalid sigAuth or camera access token
-            raise web.HTTPForbidden
-
        if not camera.is_on:
            _LOGGER.debug("Camera is off")
            raise web.HTTPServiceUnavailable
@@ -66,5 +66,10 @@ async def get_cert_expiry_timestamp(
    except ssl.SSLError as err:
        raise ValidationFailure(err.args[0]) from err

+    if not cert or "notAfter" not in cert:
+        raise ValidationFailure(
+            f"No certificate expiration found for: {hostname}:{port}"
+        )
+
    ts_seconds = ssl.cert_time_to_seconds(cert["notAfter"])
    return dt_util.utc_from_timestamp(ts_seconds)
@@ -7,7 +7,7 @@ from homeassistant.core import HomeAssistant, State
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.automation import DomainSpec
 from homeassistant.helpers.trigger import (
-    ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST,
+    ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR,
    EntityNumericalStateChangedTriggerBase,
    EntityNumericalStateChangedTriggerWithUnitBase,
    EntityNumericalStateCrossedThresholdTriggerBase,
@@ -26,7 +26,7 @@ from .const import ATTR_HUMIDITY, ATTR_HVAC_ACTION, DOMAIN, HVACAction, HVACMode

 CONF_HVAC_MODE = "hvac_mode"

-HVAC_MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST.extend(
+HVAC_MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR.extend(
    {
        vol.Required(CONF_OPTIONS): {
            vol.Required(CONF_HVAC_MODE): vol.All(
@@ -5,7 +5,7 @@
  fields:
    behavior: &trigger_behavior
      required: true
-      default: any
+      default: each
      selector:
        automation_behavior:
          mode: trigger
@@ -24,6 +24,7 @@ from homeassistant.components.alexa import (
    entities as alexa_entities,
    errors as alexa_errors,
 )
+from homeassistant.components.frontend import DATA_THEMES
 from homeassistant.components.google_assistant import helpers as google_helpers
 from homeassistant.components.homeassistant import exposed_entities
 from homeassistant.components.http import KEY_HASS, HomeAssistantView, require_admin
@@ -508,6 +509,15 @@ class DownloadSupportPackageView(HomeAssistantView):
            "custom_integrations": custom_integrations,
        }

+    @callback
+    def _get_themes_info(self, hass: HomeAssistant) -> dict[str, Any]:
+        """Collect information about user-installed custom themes."""
+        themes: dict[str, Any] = hass.data.get(DATA_THEMES, {})
+        return {
+            "count": len(themes),
+            "themes": sorted(themes),
+        }
+
    async def _generate_markdown(
        self,
        hass: HomeAssistant,
@@ -569,6 +579,25 @@ class DownloadSupportPackageView(HomeAssistantView):
                    )
                markdown += "\n</details>\n\n"

+        # Add custom themes information
+        try:
+            themes_info = self._get_themes_info(hass)
+        except Exception:  # noqa: BLE001
+            # Broad exception catch for robustness in support package generation
+            markdown += "## Custom Themes\n\n"
+            markdown += "Unable to collect themes information\n\n"
+        else:
+            markdown += "## Custom Themes\n\n"
+            markdown += f"Custom themes: {themes_info['count']}\n\n"
+
+            if themes_info["themes"]:
+                markdown += "<details><summary>Custom themes</summary>\n\n"
+                markdown += "Name\n"
+                markdown += "---\n"
+                for theme in themes_info["themes"]:
+                    markdown += f"{theme}\n"
+                markdown += "\n</details>\n\n"
+
        for domain, domain_info in domains_info.items():
            domain_info_md = get_domain_table_markdown(domain_info)
            markdown += (
@@ -175,7 +175,6 @@ class ConfigManagerFlowIndexView(
        vol.Schema(
            {
                vol.Required("handler"): vol.Any(str, list),
-                vol.Optional("show_advanced_options", default=False): cv.boolean,
                vol.Optional("entry_id"): cv.string,
            },
            extra=vol.ALLOW_EXTRA,
@@ -302,7 +301,6 @@ class SubentryManagerFlowIndexView(
        vol.Schema(
            {
                vol.Required("handler"): vol.All(vol.Coerce(tuple), (str, str)),
-                vol.Optional("show_advanced_options", default=False): cv.boolean,
            },
            extra=vol.ALLOW_EXTRA,
        )
@@ -6,5 +6,5 @@
  "documentation": "https://www.home-assistant.io/integrations/conversation",
  "integration_type": "entity",
  "quality_scale": "internal",
-  "requirements": ["hassil==3.5.0", "home-assistant-intents==2026.5.5"]
+  "requirements": ["hassil==3.6.0", "home-assistant-intents==2026.6.1"]
 }
@@ -3,6 +3,8 @@
 from collections.abc import Awaitable, Callable
 from typing import Any

+from hassil.parse_expression import parse_sentence
+from hassil.parser import ParseError
 from hassil.recognize import RecognizeResult
 from hassil.util import (
    PUNCTUATION_END,
@@ -42,6 +44,17 @@ def has_no_punctuation(value: list[str]) -> list[str]:
    return value


+def is_valid_sentence(value: list[str]) -> list[str]:
+    """Validate result can be parsed by hassil."""
+    for sentence in value:
+        try:
+            parse_sentence(sentence)
+        except ParseError as err:
+            raise vol.Invalid(f"invalid sentence: {err}") from err
+
+    return value
+
+
 def has_one_non_empty_item(value: list[str]) -> list[str]:
    """Validate result has at least one item."""
    if len(value) < 1:
@@ -58,7 +71,11 @@ TRIGGER_SCHEMA = cv.TRIGGER_BASE_SCHEMA.extend(
    {
        vol.Required(CONF_PLATFORM): DOMAIN,
        vol.Required(CONF_COMMAND): vol.All(
-            cv.ensure_list, [cv.string], has_one_non_empty_item, has_no_punctuation
+            cv.ensure_list,
+            [cv.string],
+            has_one_non_empty_item,
+            has_no_punctuation,
+            is_valid_sentence,
        ),
    }
 )
@@ -5,7 +5,7 @@
  fields:
    behavior:
      required: true
-      default: any
+      default: each
      selector:
        automation_behavior:
          mode: trigger
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior:
    required: true
-    default: any
+    default: each
    selector:
      automation_behavior:
        mode: trigger
--- a/Show More
+++ b/Show More